Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Alexandre Courbot <acourbot@chromium.org>
To: Tiffany Lin <tiffany.lin@mediatek.com>,
	Andrew-CT Chen <andrew-ct.chen@mediatek.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mediatek@lists.infradead.org, gnurou@gmail.com,
	Alexandre Courbot <acourbot@chromium.org>,
	Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH v3 2/2] media: mtk-vcodec: fix build breakage when one of VPU or SCP is enabled
Date: Mon, 12 Oct 2020 14:35:57 +0900
Message-ID: <20201012053557.4102148-3-acourbot@chromium.org> (raw)
In-Reply-To: <20201012053557.4102148-1-acourbot@chromium.org>

The addition of MT8183 support added a dependency on the SCP remoteproc
module. However the initial patch used the "select" Kconfig directive,
which may result in the SCP module to not be compiled if remoteproc was
disabled. In such a case, mtk-vcodec would try to link against
non-existent SCP symbols. "select" was clearly misused here as explained
in kconfig-language.txt.

Replace this by a "depends" directive on at least one of the VPU and
SCP modules, to allow the driver to be compiled as long as one of these
is enabled, and adapt the code to support this new scenario.

Also adapt the Kconfig text to explain the extra requirements for MT8173
and MT8183.

Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/platform/Kconfig                | 22 +++++++++++++++----
 drivers/media/platform/mtk-vcodec/Makefile    | 10 +++++++--
 .../platform/mtk-vcodec/mtk_vcodec_fw_priv.h  | 18 +++++++++++++++
 3 files changed, 44 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index a3cb104956d5..457b6c39ddc0 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -253,18 +253,32 @@ config VIDEO_MEDIATEK_VCODEC
 	depends on MTK_IOMMU || COMPILE_TEST
 	depends on VIDEO_DEV && VIDEO_V4L2
 	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on VIDEO_MEDIATEK_VPU || MTK_SCP
+	# The two following lines ensure we have the same state ("m" or "y") as
+	# our dependencies, to avoid missing symbols during link.
+	depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU
+	depends on MTK_SCP || !MTK_SCP
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
-	select VIDEO_MEDIATEK_VPU
-	select MTK_SCP
+	select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
+	select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
 	help
 	    Mediatek video codec driver provides HW capability to
-	    encode and decode in a range of video formats
-	    This driver rely on VPU driver to communicate with VPU.
+	    encode and decode in a range of video formats on MT8173
+	    and MT8183.
+
+	    Note that support for MT8173 requires VIDEO_MEDIATEK_VPU to
+	    also be selected. Support for MT8183 depends on MTK_SCP.
 
 	    To compile this driver as modules, choose M here: the
 	    modules will be called mtk-vcodec-dec and mtk-vcodec-enc.
 
+config VIDEO_MEDIATEK_VCODEC_VPU
+	bool
+
+config VIDEO_MEDIATEK_VCODEC_SCP
+	bool
+
 config VIDEO_MEM2MEM_DEINTERLACE
 	tristate "Deinterlace support"
 	depends on VIDEO_DEV && VIDEO_V4L2
diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile
index 6e1ea3a9f052..4618d43dbbc8 100644
--- a/drivers/media/platform/mtk-vcodec/Makefile
+++ b/drivers/media/platform/mtk-vcodec/Makefile
@@ -25,5 +25,11 @@ mtk-vcodec-enc-y := venc/venc_vp8_if.o \
 mtk-vcodec-common-y := mtk_vcodec_intr.o \
 		mtk_vcodec_util.o \
 		mtk_vcodec_fw.o \
-		mtk_vcodec_fw_vpu.o \
-		mtk_vcodec_fw_scp.o
+
+ifneq ($(CONFIG_VIDEO_MEDIATEK_VCODEC_VPU),)
+mtk-vcodec-common-y += mtk_vcodec_fw_vpu.o
+endif
+
+ifneq ($(CONFIG_VIDEO_MEDIATEK_VCODEC_SCP),)
+mtk-vcodec-common-y += mtk_vcodec_fw_scp.o
+endif
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_priv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_priv.h
index 51f1694a7c7d..b41e66185cec 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_priv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_priv.h
@@ -27,8 +27,26 @@ struct mtk_vcodec_fw_ops {
 	void (*release)(struct mtk_vcodec_fw *fw);
 };
 
+#if IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VCODEC_VPU)
 struct mtk_vcodec_fw *mtk_vcodec_fw_vpu_init(struct mtk_vcodec_dev *dev,
 					     enum mtk_vcodec_fw_use fw_use);
+#else
+static inline struct mtk_vcodec_fw *
+mtk_vcodec_fw_vpu_init(struct mtk_vcodec_dev *dev,
+		       enum mtk_vcodec_fw_use fw_use)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_VIDEO_MEDIATEK_VCODEC_VPU */
+
+#if IS_ENABLED(CONFIG_VIDEO_MEDIATEK_VCODEC_SCP)
 struct mtk_vcodec_fw *mtk_vcodec_fw_scp_init(struct mtk_vcodec_dev *dev);
+#else
+static inline struct mtk_vcodec_fw *
+mtk_vcodec_fw_scp_init(struct mtk_vcodec_dev *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_VIDEO_MEDIATEK_VCODEC_SCP */
 
 #endif /* _MTK_VCODEC_FW_PRIV_H_ */
-- 
2.28.0.1011.ga647a8990f-goog


  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-12  5:35 [PATCH v3 0/2] media: mtk-vcodec: fix builds when remoteproc is disabled Alexandre Courbot
2020-10-12  5:35 ` [PATCH v3 1/2] media: mtk-vcodec: move firmware implementations into their own files Alexandre Courbot
2020-10-12  5:35 ` Alexandre Courbot [this message]
2020-10-12  7:43   ` [PATCH v3 2/2] media: mtk-vcodec: fix build breakage when one of VPU or SCP is enabled Mauro Carvalho Chehab
2020-10-13 12:38     ` Alexandre Courbot
2020-10-12 14:59   ` Randy Dunlap
2020-10-13  0:57     ` Alexandre Courbot
2020-10-12 17:57   ` Randy Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201012053557.4102148-3-acourbot@chromium.org \
    --to=acourbot@chromium.org \
    --cc=andrew-ct.chen@mediatek.com \
    --cc=gnurou@gmail.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=rdunlap@infradead.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tiffany.lin@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git