From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.6 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,HK_RANDOM_FROM,INCLUDES_PATCH, MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C14F4C433E7 for ; Fri, 16 Oct 2020 14:42:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 673852084C for ; Fri, 16 Oct 2020 14:42:11 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="DHUqeU67" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406179AbgJPOmK (ORCPT ); Fri, 16 Oct 2020 10:42:10 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56324 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2395258AbgJPOmK (ORCPT ); Fri, 16 Oct 2020 10:42:10 -0400 Received: from mail-wm1-x343.google.com (mail-wm1-x343.google.com [IPv6:2a00:1450:4864:20::343]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B72E9C061755; Fri, 16 Oct 2020 07:42:09 -0700 (PDT) Received: by mail-wm1-x343.google.com with SMTP id j136so3239232wmj.2; Fri, 16 Oct 2020 07:42:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=vboLU1koxpPIQBOoTbGtXBkZYCehVDhO9l5JYy2MLxc=; b=DHUqeU67o/gh1IMc2HZu5ORst63DD5hPpGj/mIm6TJpDvC5WeKI0lz8nROaKnqPv0d u+ZmJYJLuw7huWmIgnh3owbw/rIzgwmzz6KfRnp8Rxn/Oz3M936VyPOAop3hPFjf/NHy g1yPMr4P/vvqjOgl7gCwtqEh44tfmlfd5snYNC4sbtxYsfWNik0gJo4RCjQ2BxL712jV VD1UJhQNKpHmEDuc1ohISGpBkMjC/SZtc1D8UBlUM2oflqLm9MSKw5Vgk8+2d/20Q4Pi F0BnMqv7vwQaAExOFlwMwSLeNKkOwhOe7haJE/QdFpkrPipywDKjn5JesDj0MQ4c/2SW FLGQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=vboLU1koxpPIQBOoTbGtXBkZYCehVDhO9l5JYy2MLxc=; b=EaUEuSnucymsb21XT2fid3pCgIvGfVTft7OMt1Iy0SsMKb5DiP5dJma04Cem4I/eKJ mRDFQXWCKmLjE2hVF3iMTuU1npVK2d6ORbYcAb63KcdiMw0I6Wv0VBhAwSI58RIupWbY NhaTvsHPkVvivkHnFEZIg73g/zLuzUHGZy5ex+L6K/Gn5LNu+ZcM/XtYU4XmApy75V+y jMlbtAook746qLhAqo024tOdY16f0BB50eaBf/sPi7Bcq4VEqTzMLjfX+vhQmSpl+qRb zqiIwGi5C0qUE7R9oclzaFGAaptz2lyV2KR2guHaNUVEvEVUDsllIUzrKxkIiofcfBdY S16w== X-Gm-Message-State: AOAM533kngmfkUNwyAryS9yrGkQi0cs2CYwuaR4nk8w4USVMycXSyJ/9 i58m3Tl5ag0QwJISqd05R2s= X-Google-Smtp-Source: ABdhPJyAvr/dCjR5tF5N5anYSWloY8Mf5F01vgyGPm4dnZikDgVTFClZGColpP2DuPrTt0x2UWHWZg== X-Received: by 2002:a7b:c408:: with SMTP id k8mr4241462wmi.68.1602859328364; Fri, 16 Oct 2020 07:42:08 -0700 (PDT) Received: from arch-thunder.localdomain (a109-49-46-234.cpe.netcabo.pt. [109.49.46.234]) by smtp.gmail.com with ESMTPSA id c16sm3840130wrx.31.2020.10.16.07.42.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 16 Oct 2020 07:42:07 -0700 (PDT) Date: Fri, 16 Oct 2020 15:42:04 +0100 From: Rui Miguel Silva To: Jacopo Mondi Cc: Rob Herring , sakari.ailus@linux.intel.com, Hans Verkuil , linux-media@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH v2 1/3] dt-bindings: ov2680: convert bindings to yaml Message-ID: <20201016144204.3viee7spmvwtms5i@arch-thunder.localdomain> References: <20201014142759.726823-1-rmfrfs@gmail.com> <20201014142759.726823-2-rmfrfs@gmail.com> <20201015144905.4b23k5uy7ycuhvlo@uno.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20201015144905.4b23k5uy7ycuhvlo@uno.localdomain> Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hey Jacopo, Thanks for the review. On Thu, Oct 15, 2020 at 04:49:05PM +0200, Jacopo Mondi wrote: > Hi Rui, > > On Wed, Oct 14, 2020 at 03:27:57PM +0100, Rui Miguel Silva wrote: > > Convert ov2680 sensor bindings documentation to yaml schema, remove > > the textual bindings document and update MAINTAINERS entry. > > > > Signed-off-by: Rui Miguel Silva > > --- > > > > v1 -> v2: > > Sakari Ailus - Patch 1/3: > > https://lore.kernel.org/linux-media/20201013160908.GC13341@paasikivi.fi.intel.com/ > > - omit remote-endpoint > > - remove not needed clock-lanes and data-lanes > > > > .../devicetree/bindings/media/i2c/ov2680.txt | 46 -------- > > .../devicetree/bindings/media/i2c/ov2680.yaml | 109 ++++++++++++++++++ > > MAINTAINERS | 2 +- > > 3 files changed, 110 insertions(+), 47 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt > > deleted file mode 100644 > > index 11e925ed9dad..000000000000 > > --- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt > > +++ /dev/null > > @@ -1,46 +0,0 @@ > > -* Omnivision OV2680 MIPI CSI-2 sensor > > - > > -Required Properties: > > -- compatible: should be "ovti,ov2680". > > -- clocks: reference to the xvclk input clock. > > -- clock-names: should be "xvclk". > > -- DOVDD-supply: Digital I/O voltage supply. > > -- DVDD-supply: Digital core voltage supply. > > -- AVDD-supply: Analog voltage supply. > > - > > -Optional Properties: > > -- reset-gpios: reference to the GPIO connected to the powerdown/reset pin, > > - if any. This is an active low signal to the OV2680. > > - > > -The device node must contain one 'port' child node for its digital output > > -video port, and this port must have a single endpoint in accordance with > > - the video interface bindings defined in > > -Documentation/devicetree/bindings/media/video-interfaces.txt. > > - > > -Endpoint node required properties for CSI-2 connection are: > > -- remote-endpoint: a phandle to the bus receiver's endpoint node. > > -- clock-lanes: should be set to <0> (clock lane on hardware lane 0). > > -- data-lanes: should be set to <1> (one CSI-2 lane supported). > > - > > -Example: > > - > > -&i2c2 { > > - ov2680: camera-sensor@36 { > > - compatible = "ovti,ov2680"; > > - reg = <0x36>; > > - clocks = <&osc>; > > - clock-names = "xvclk"; > > - reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; > > - DOVDD-supply = <&sw2_reg>; > > - DVDD-supply = <&sw2_reg>; > > - AVDD-supply = <®_peri_3p15v>; > > - > > - port { > > - ov2680_to_mipi: endpoint { > > - remote-endpoint = <&mipi_from_sensor>; > > - clock-lanes = <0>; > > - data-lanes = <1>; > > - }; > > - }; > > - }; > > -}; > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml > > Might this be a good occasion to rename the file to ovti,ov2680.yaml ? Yeah, was just following your precedent in ov5647 and the other ov already ported to yaml in the directory. But I agree that it makes sense to rename the files. > > > new file mode 100644 > > index 000000000000..ef2b45b03dcc > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/ov2680.yaml > > @@ -0,0 +1,109 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/ov2680.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Omnivision OV2680 CMOS Sensor > > + > > +maintainers: > > + - Rui Miguel Silva > > + > > +description: |- > > + The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2 > > + megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200) > > + camera. It provides full-frame, sub-sampled, or windowed 10-bit images in > > + various formats via the control of the Serial Camera Control Bus (SCCB) > > + interface. The OV2680 has an image array capable of operating at up to 30 > ^ double space > > > + frames per second (fps) in UXGA resolution. > > + > > +properties: > > + compatible: > > + const: ovti,ov2680 > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + clock-names: > > + description: > > I'll never get yaml right, doesn't breaking lines require '|' after > the semicolon ? The validator does not complain, so I guess not. I also had that idea, but looking also to other cases, and also in the examlpe-schema where you have both cases, looks like it is not needed. > > > + Input clock for the sensor. > > + items: > > + - const: xvclk > > + > > + reset-gpios: > > + description: > > + The phandle and specifier for the GPIO that controls sensor reset. > > + This corresponds to the hardware pin XSHUTDOWN which is physically > > + active low. > > + > > + dovdd-supply: > > + description: > > + Definition of the regulator used as interface power supply. > > + > > + avdd-supply: > > + description: > > + Definition of the regulator used as analog power supply. > > + > > + dvdd-supply: > > + description: > > + Definition of the regulator used as digital power supply. > > + > > + port: > > + type: object > > + additionalProperties: false > > + description: > > + A node containing an output port node with an endpoint definition > > + as documented in > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > + > > + properties: > > + endpoint: > > + type: object > > + > > + required: > > + - endpoint > > If no endpoint properties are specified, the last 6 lines here can be > omitted. The rationale is that 'port' will be validated against a > forthcoming 'of-graph.yaml' schema. So just: > > port: > type: object > additionalProperties: false > description: > A node containing an output port node with an endpoint definition > as documented in > Documentation/devicetree/bindings/media/video-interfaces.txt > > With 'port' listed as mandatory, as you do already. you are right, will fix this. > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - dovdd-supply > > + - avdd-supply > > + - dvdd-supply > > + - reset-gpios > > + - port > > + > > +unevaluatedProperties: false > > 'additionalProperties: false' too ? instead. > > > + > > +examples: > > + - | > > + #include > > + > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ov2680: camera-sensor@36 { > > + compatible = "ovti,ov2680"; > > + reg = <0x36>; > > + clocks = <&osc>; > > + clock-names = "xvclk"; > > + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; > > + > > + dovdd-supply = <&sw2_reg>; > > + dvdd-supply = <&sw2_reg>; > > + avdd-supply = <®_peri_3p15v>; > > + > > + port { > > + ov2680_to_mipi: endpoint { > > + remote-endpoint = <&mipi_from_sensor>; > > + }; > > + }; > > + }; > > + }; > > +... > > + > > Applying the patch gives me: > .git/rebase-apply/patch:182: new blank line at EOF. > > I see most bindings have an empty line before '...' > > With this small issues fixed: > Reviewed-by: Jacopo Mondi Thanks again Jacopo. Cheers, Rui > > Thanks > j > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 2e85e114c9c3..926dcdc4794c 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -12775,7 +12775,7 @@ M: Rui Miguel Silva > > L: linux-media@vger.kernel.org > > S: Maintained > > T: git git://linuxtv.org/media_tree.git > > -F: Documentation/devicetree/bindings/media/i2c/ov2680.txt > > +F: Documentation/devicetree/bindings/media/i2c/ov2680.yaml > > F: drivers/media/i2c/ov2680.c > > > > OMNIVISION OV2685 SENSOR DRIVER > > -- > > 2.28.0 > >