From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.7 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 94D8DC43467 for ; Fri, 16 Oct 2020 16:02:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 43973207BC for ; Fri, 16 Oct 2020 16:02:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2410529AbgJPQCd (ORCPT ); Fri, 16 Oct 2020 12:02:33 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:52549 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2410466AbgJPQCd (ORCPT ); Fri, 16 Oct 2020 12:02:33 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.localdomain (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 9C508E000F; Fri, 16 Oct 2020 16:02:28 +0000 (UTC) Date: Fri, 16 Oct 2020 20:02:13 +0200 From: Jacopo Mondi To: Rui Miguel Silva Cc: Rob Herring , sakari.ailus@linux.intel.com, Hans Verkuil , linux-media@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH v2 3/3] dt-bindings: imx7-mipi-csi2: convert bindings to yaml Message-ID: <20201016180213.obpok77vb3rwserd@uno.localdomain> References: <20201014142759.726823-1-rmfrfs@gmail.com> <20201014142759.726823-4-rmfrfs@gmail.com> <20201015155251.3npqi2t4oghuguab@uno.localdomain> <20201016145109.lscb56fwfs3k4jct@arch-thunder.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20201016145109.lscb56fwfs3k4jct@arch-thunder.localdomain> Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Rui, On Fri, Oct 16, 2020 at 03:51:09PM +0100, Rui Miguel Silva wrote: > Hi again Jacopo, > On Thu, Oct 15, 2020 at 05:52:51PM +0200, Jacopo Mondi wrote: > > Hi Rui, > > > > On Wed, Oct 14, 2020 at 03:27:59PM +0100, Rui Miguel Silva wrote: > > > Convert imx7 mipi csi2 bindings documentation to yaml schema, remove > > > the textual document and update MAINTAINERS entry. > > > > > > Signed-off-by: Rui Miguel Silva > > > --- > > > .../bindings/media/imx7-mipi-csi2.txt | 90 --------- > > > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ > > > MAINTAINERS | 2 +- > > > 3 files changed, 182 insertions(+), 91 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > deleted file mode 100644 > > > index 71fd74ed3ec8..000000000000 > > > --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > +++ /dev/null > > > @@ -1,90 +0,0 @@ > > > -Freescale i.MX7 Mipi CSI2 > > > -========================= > > > - > > > -mipi_csi2 node > > > --------------- > > > - > > > -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is > > > -compatible with previous version of Samsung D-phy. > > > - > > > -Required properties: > > > - > > > -- compatible : "fsl,imx7-mipi-csi2"; > > > -- reg : base address and length of the register set for the device; > > > -- interrupts : should contain MIPI CSIS interrupt; > > > -- clocks : list of clock specifiers, see > > > - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; > > > -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching > > > - entries in the clock property; > > > -- power-domains : a phandle to the power domain, see > > > - Documentation/devicetree/bindings/power/power_domain.txt for details. > > > -- reset-names : should include following entry "mrst"; > > > -- resets : a list of phandle, should contain reset entry of > > > - reset-names; > > > -- phy-supply : from the generic phy bindings, a phandle to a regulator that > > > - provides power to MIPI CSIS core; > > > - > > > -Optional properties: > > > - > > > -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default > > > - value when this property is not specified is 166 MHz; > > > -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; > > > - > > > -The device node should contain two 'port' child nodes with one child 'endpoint' > > > -node, according to the bindings defined in: > > > - Documentation/devicetree/bindings/ media/video-interfaces.txt. > > > - The following are properties specific to those nodes. > > > - > > > -port node > > > ---------- > > > - > > > -- reg : (required) can take the values 0 or 1, where 0 shall be > > > - related to the sink port and port 1 shall be the source > > > - one; > > > - > > > -endpoint node > > > -------------- > > > - > > > -- data-lanes : (required) an array specifying active physical MIPI-CSI2 > > > - data input lanes and their mapping to logical lanes; this > > > - shall only be applied to port 0 (sink port), the array's > > > - content is unused only its length is meaningful, > > > - in this case the maximum length supported is 2; > > > - > > > -example: > > > - > > > - mipi_csi: mipi-csi@30750000 { > > > - #address-cells = <1>; > > > - #size-cells = <0>; > > > - > > > - compatible = "fsl,imx7-mipi-csi2"; > > > - reg = <0x30750000 0x10000>; > > > - interrupts = ; > > > - clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > > - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > > - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > > - clock-names = "pclk", "wrap", "phy"; > > > - clock-frequency = <166000000>; > > > - power-domains = <&pgc_mipi_phy>; > > > - phy-supply = <®_1p0d>; > > > - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > > - reset-names = "mrst"; > > > - fsl,csis-hs-settle = <3>; > > > - > > > - port@0 { > > > - reg = <0>; > > > - > > > - mipi_from_sensor: endpoint { > > > - remote-endpoint = <&ov2680_to_mipi>; > > > - data-lanes = <1>; > > > - }; > > > - }; > > > - > > > - port@1 { > > > - reg = <1>; > > > - > > > - mipi_vc0_to_csi_mux: endpoint { > > > - remote-endpoint = <&csi_mux_from_mipi_vc0>; > > > - }; > > > - }; > > > - }; > > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > new file mode 100644 > > > index 000000000000..0438b28232ed > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > @@ -0,0 +1,181 @@ > > > +# SPDX-License-Identifier: GPL-2.0-only > > > > Same question about dual licensing > > > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: NXP i.MX7 Mipi CSI2 > > > + > > > +maintainers: > > > + - Rui Miguel Silva > > > + > > > +description: | > > > + this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is > > > + compatible with previous version of samsung d-phy. > > > > nit: missing a few captial letters (beginning and after a full stop). > > will fix along all document. > > > > + > > > +properties: > > > + compatible: > > > + items: > > > + - enum: > > > + - fsl,imx7-mipi-csi2 > > > > Should enum with a single item be expressed as a const ? > > agree. > > > > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + interrupts: > > > + maxItems: 1 > > > + > > > + clocks: > > > + minItems: 3 > > > + > > > + clock-names: > > > + items: > > > + - const: pclk > > > + - const: wrap > > > + - const: phy > > > + > > > + power-domains: > > > + maxItems: 1 > > > + > > > + phy-supply: > > > + description: > > > + Phandle to a regulator that provides power to the PHY. This > > > + regulator will be managed during the PHY power on/off sequence. > > > + > > > + resets: > > > + maxItems: 1 > > > + > > > + reset-names: > > > + const: mrst > > > + > > > + clock-frequency: > > > > This was here already, but shouldn't this property be assigned in the > > clock provider and you should have here a reference to it ? Otherwise, > > is this really a custom property hijacking a standard property name ? > > > > I see it is mentioned in the example-schema.yaml, so it's probably > > correct. > > I think limits and default can be assigned here. > > > > > > + description: > > > + The IP main (system bus) clock frequency in Hertz > > > + default: 166000000 > > > + > > > + fsl,csis-hs-settle: > > > + $ref: /schemas/types.yaml#/definitions/uint32 > > > + description: > > > + differential receiver (HS-RX) settle time > > > > You have used capital letters at the beginning of documentation blocks > > before. > > > > > + > > > + ports: > > > + type: object > > > + description: > > > + A node containing input and output port nodes with endpoint definitions > > > + as documented in > > > + Documentation/devicetree/bindings/media/video-interfaces.txt > > > + > > > + properties: > > > + '#address-cells': > > > + const: 1 > > > + > > > + '#size-cells': > > > + const: 0 > > > + > > > + port@0: > > > + type: object > > > + description: > > > + Input port node, single endpoint describing the CSI-2 transmitter. > > > + > > > + properties: > > > + reg: > > > + const: 0 > > > + > > > + endpoint: > > > + type: object > > > + > > > + properties: > > > + data-lanes: > > > + maxItems: 1 > > > > How many data lanes does this receiver supports ? I see in the txt > > bindingsd: > > data-lanes : (required) an array specifying active physical MIPI-CSI2 > > data input lanes and their mapping to logical lanes; this > > shall only be applied to port 0 (sink port), the array's > > content is unused only its length is meaningful, > > in this case the maximum length supported is 2; > > > > I'm not sure I fully get this. Does this mean up to 2 data lanes are > > supported ? > > yeah, it supports up to 2 data lanes. Will fix > This one might get nasty then. For reference, this is what I've been suggested to use by Laurent and Rob in the imx214 conversion (not yet landed afaict) to express that <1 2> and <1 2 3 4> where allowed: + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: See ../video-interfaces.txt + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 Hope it helps. Thanks j > > > > > + > > > + remote-endpoint: true > > > + > > > + required: > > > + - data-lanes > > > + - remote-endpoint > > > + > > > + additionalProperties: false > > > + > > > + additionalProperties: false > > > + > > > + port@1: > > > + type: object > > > + description: > > > + Output port node, > > > > Rougue ',' at the end. You probably want a full stop or > > > + > > > + properties: > > > + reg: > > > + const: 1 > > > + > > > + endpoint: > > > + type: object > > > + > > > + properties: > > > + remote-endpoint: true > > > + > > > + required: > > > + - remote-endpoint > > > + > > > + additionalProperties: false > > > > As no other endpoint property is specified, the whole 'endpoint' block > > can probably be omitted ? > > > > > + > > > + additionalProperties: false > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - interrupts > > > + - clocks > > > + - clock-names > > > + - power-domains > > > + - resets > > > + - reset-names > > > + - ports > > > > phy-supply was listed as required in the txt bindings > > good catch. > > > > > > + > > > +unevaluatedProperties: false > > > > additionalProperties: false > > > > Thanks again for your review. > > Cheers, > Rui > > > Thanks > > j > > > > > + > > > +examples: > > > + - | > > > + #include > > > + #include > > > + #include > > > + #include > > > + > > > + mipi_csi: mipi-csi@30750000 { > > > + compatible = "fsl,imx7-mipi-csi2"; > > > + reg = <0x30750000 0x10000>; > > > + interrupts = ; > > > + > > > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > > > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > > > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > > > + clock-names = "pclk", "wrap", "phy"; > > > + clock-frequency = <166000000>; > > > + > > > + power-domains = <&pgc_mipi_phy>; > > > + phy-supply = <®_1p0d>; > > > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > > + reset-names = "mrst"; > > > + fsl,csis-hs-settle = <3>; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + mipi_from_sensor: endpoint { > > > + remote-endpoint = <&ov2680_to_mipi>; > > > + data-lanes = <1>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + mipi_vc0_to_csi_mux: endpoint { > > > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > > > + }; > > > + }; > > > + }; > > > + }; > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > index b7f7f14cd85b..9da67222b0c7 100644 > > > --- a/MAINTAINERS > > > +++ b/MAINTAINERS > > > @@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org > > > S: Maintained > > > T: git git://linuxtv.org/media_tree.git > > > F: Documentation/admin-guide/media/imx7.rst > > > -F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt > > > F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml > > > +F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > > > F: drivers/staging/media/imx/imx7-media-csi.c > > > F: drivers/staging/media/imx/imx7-mipi-csis.c > > > > > > -- > > > 2.28.0 > > >