linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: stanimir.varbanov@linaro.org, agross@kernel.org,
	bjorn.andersson@linaro.org, mchehab@kernel.org,
	linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org
Cc: bryan.odonoghue@linaro.org, dikshita@codeaurora.org,
	jonathan@marek.ca, vgarodia@codeaurora.org
Subject: [PATCH v2 18/25] media: venus: hfi: Add 6xx AXI halt logic
Date: Fri, 12 Mar 2021 17:30:32 +0000	[thread overview]
Message-ID: <20210312173039.1387617-19-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20210312173039.1387617-1-bryan.odonoghue@linaro.org>

From: Dikshita Agarwal <dikshita@codeaurora.org>

This patch takes the downstream AXI halt routine and applies it when
IS_V6() is true.

bod: Converted to readl_poll_timeout()
     Removed poll timeout for LPI register, testing showed the value
     would always timeout and work, so the polling did nothing of value.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/venus/hfi_venus.c | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
index 24cf20f76e7f..cebb20cf371f 100644
--- a/drivers/media/platform/qcom/venus/hfi_venus.c
+++ b/drivers/media/platform/qcom/venus/hfi_venus.c
@@ -541,10 +541,42 @@ static int venus_halt_axi(struct venus_hfi_device *hdev)
 {
 	void __iomem *wrapper_base = hdev->core->wrapper_base;
 	void __iomem *vbif_base = hdev->core->vbif_base;
+	void __iomem *cpu_cs_base = hdev->core->cpu_cs_base;
+	void __iomem *aon_base = hdev->core->aon_base;
 	struct device *dev = hdev->core->dev;
 	u32 val;
+	u32 mask_val;
 	int ret;
 
+	if (IS_V6(hdev->core)) {
+		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
+
+		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
+		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
+					 val,
+					 val & BIT(0),
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+		if (ret)
+			return -ETIMEDOUT;
+
+		mask_val = (BIT(2) | BIT(1) | BIT(0));
+		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
+
+		writel(0x00, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
+		ret = readl_poll_timeout(wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS_V6,
+					 val,
+					 val == 0,
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+
+		if (ret) {
+			dev_err(dev, "DBLP Release: lpi_status %x\n", val);
+			return -ETIMEDOUT;
+		}
+		return 0;
+	}
+
 	if (IS_V4(hdev->core)) {
 		val = readl(wrapper_base + WRAPPER_CPU_AXI_HALT);
 		val |= WRAPPER_CPU_AXI_HALT_HALT;
-- 
2.30.1


  parent reply	other threads:[~2021-03-12 17:30 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 17:30 [PATCH v2 00/25] media: venus: Enable 6xx support Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 01/25] media: venus: Update v6 buffer descriptors Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 02/25] media: venus: core,pm: Add handling for resets Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 03/25] media: venus: core: add sm8250 DT compatible and resource data Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 04/25] media: venus: core: Add io base variables for each block Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 05/25] media: venus: hfi,pm,firmware: Convert to block relative addressing Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 06/25] media: venus: hfi: Define block offsets for V6 hardware Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 07/25] media: venus: hfi: Define additional 6xx registers Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 08/25] media: venus: core: Add differentiator IS_V6(core) Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 09/25] media: venus: core: Add an io base for TZ wrapper regs Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 10/25] media: venus: core: Add an io base for AON regs Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 11/25] media: venus: core: Hook to V6 base registers when appropriate Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 12/25] media: venus: hfi: Add a 6xx boot logic Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 13/25] media: venus: hfi: Add 6xx interrupt support Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 14/25] media: venus: hfi: Read WRAPPER_TZ_CPU_STATUS_V6 on 6xx Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 15/25] media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locations Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 16/25] media: venus: pm: Hook 6xx pm ops into 4xx pm ops Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 17/25] media: venus: core,pm: Vote for min clk freq during venus boot Bryan O'Donoghue
2021-03-12 17:30 ` Bryan O'Donoghue [this message]
2021-03-12 17:30 ` [PATCH v2 19/25] media: venus: pm: Toggle 6xx wrapper power in vcodec_control Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 20/25] media: venus: firmware: Do not toggle WRAPPER_A9SS_SW_RESET on 6xx Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 21/25] media: venus: helpers: Add internal buffer list for v6 Bryan O'Donoghue
2021-03-17  9:59   ` dikshita
2021-03-12 17:30 ` [PATCH v2 22/25] media: venus: helpers, hfi, vdec: Set actual plane constraints to FW Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 23/25] media: venus: hfi: Increase plat_buf_v6 o/p buffer count Bryan O'Donoghue
2021-03-12 17:30 ` [PATCH v2 24/25] media: venus: helper: Decide work mode Bryan O'Donoghue
2021-03-22 13:12   ` Stanimir Varbanov
2021-03-12 17:30 ` [PATCH v2 25/25] media: venus: vdec: Fix decoder cmd STOP issue Bryan O'Donoghue
2021-03-23 12:20 ` [PATCH v2 00/25] media: venus: Enable 6xx support Stanimir Varbanov
2021-03-23 14:07   ` Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210312173039.1387617-19-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dikshita@codeaurora.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=stanimir.varbanov@linaro.org \
    --cc=vgarodia@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).