linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Fricke <sebastian.fricke@posteo.net>
To: linux-media@vger.kernel.org
Cc: dafna.hirschfeld@collabora.com,
	laurent.pinchart@ideasonboard.com, helen.koike@collabora.com,
	heiko@sntech.de, Sebastian Fricke <sebastian.fricke@posteo.net>
Subject: [PATCH v2] media: rkisp1: Increase ISP input resolution limit
Date: Fri, 26 Mar 2021 07:23:30 +0100	[thread overview]
Message-ID: <20210326062329.53103-1-sebastian.fricke@posteo.net> (raw)

The current implementation limits the maximum sink pad resolution to
4032x3024, which is mentioned by the Rockchip TRM as the maximum size
to handle black level calibration. But the ISP can actually set it's
sink pad format to a size of 4416x3312.
Allow higher sink pad resolutions in order to allow a bigger range of
sensor modes to be used with the RkISP1.
Apply the previous limit to the sink pad crop instead of the format to
satisfy the requirement of the ISP.

Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
---
Changes since v1:
- Improve the name of the new macro -> s/*_PROCESSING/*_CROP/
- Add a descriptive comment to explain why we need those 2 new macros
- Combine the separated 2 patches into a single one as patch 2 was
  depending on patch 1, which would have introduced a bisection breakage
  (Thanks to Laurent Pinchart)

This patch was tested with a NanoPC-T4 and a OV13850, which provides a
resolution of 4224x3136.
---
 .../platform/rockchip/rkisp1/rkisp1-common.h   | 18 +++++++++++++-----
 .../platform/rockchip/rkisp1/rkisp1-isp.c      |  8 ++++++--
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
index 038c303a8aed..553a4b12becf 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
@@ -29,11 +29,19 @@
 #define RKISP1_ISP_SD_SRC BIT(0)
 #define RKISP1_ISP_SD_SINK BIT(1)
 
-/* min and max values for the widths and heights of the entities */
-#define RKISP1_ISP_MAX_WIDTH		4032
-#define RKISP1_ISP_MAX_HEIGHT		3024
-#define RKISP1_ISP_MIN_WIDTH		32
-#define RKISP1_ISP_MIN_HEIGHT		32
+/*
+ * min and max values for the widths and heights of the entities
+ * The ISP device accepts input resolutions of up to 4416x3312, but
+ * it can only process resolutions of 4032x3024 internally.
+ * Therefore the crop resolution is limited to 4032x3024, the
+ * sink pad crop is applied automatically when the format is set.
+ */
+#define RKISP1_ISP_MAX_WIDTH			4416
+#define RKISP1_ISP_MAX_HEIGHT			3312
+#define RKISP1_ISP_MAX_WIDTH_CROP		4032
+#define RKISP1_ISP_MAX_HEIGHT_CROP		3024
+#define RKISP1_ISP_MIN_WIDTH			32
+#define RKISP1_ISP_MIN_HEIGHT			32
 
 #define RKISP1_RSZ_MP_SRC_MAX_WIDTH		4416
 #define RKISP1_RSZ_MP_SRC_MAX_HEIGHT		3312
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
index 2e5b57e3aedc..a8274e84a64b 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
@@ -758,9 +758,13 @@ static void rkisp1_isp_set_sink_crop(struct rkisp1_isp *isp,
 					  which);
 
 	sink_crop->left = ALIGN(r->left, 2);
-	sink_crop->width = ALIGN(r->width, 2);
+	sink_crop->width = clamp_t(u32, ALIGN(r->width, 2),
+				   RKISP1_ISP_MIN_WIDTH,
+				   RKISP1_ISP_MAX_WIDTH_CROP);
 	sink_crop->top = r->top;
-	sink_crop->height = r->height;
+	sink_crop->height = clamp_t(u32, r->height,
+				    RKISP1_ISP_MIN_HEIGHT,
+				    RKISP1_ISP_MAX_HEIGHT_CROP);
 	rkisp1_sd_adjust_crop(sink_crop, sink_fmt);
 
 	*r = *sink_crop;
-- 
2.25.1


             reply	other threads:[~2021-03-26  6:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-26  6:23 Sebastian Fricke [this message]
2021-03-29  5:40 ` [PATCH v2] media: rkisp1: Increase ISP input resolution limit Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210326062329.53103-1-sebastian.fricke@posteo.net \
    --to=sebastian.fricke@posteo.net \
    --cc=dafna.hirschfeld@collabora.com \
    --cc=heiko@sntech.de \
    --cc=helen.koike@collabora.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).