Linux-Media Archive on lore.kernel.org
 help / color / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Benoit Parrot <bparrot@ti.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Pratyush Yadav <p.yadav@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	linux-media@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: [PATCH v2 18/35] media: ti-vpe: cal: add 'use_pix_proc' field
Date: Tue, 20 Apr 2021 15:04:16 +0300
Message-ID: <20210420120433.902394-19-tomi.valkeinen@ideasonboard.com> (raw)
In-Reply-To: <20210420120433.902394-1-tomi.valkeinen@ideasonboard.com>

We already have functions to reserve and release a pix proc unit, but we
always reserve such and the code expects the pix proc unit to be used.

Add a new field, 'use_pix_proc', to indicate if the pix prox unit has
been reserved and should be used. Use the flag to skip programming pix
proc unit when not needed.

Note that we still always set the use_pix_proc flag to true.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/ti-vpe/cal.c | 10 +++++++---
 drivers/media/platform/ti-vpe/cal.h |  2 ++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 5ab87c9d3707..c1a6e23ff713 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -473,13 +473,15 @@ int cal_ctx_prepare(struct cal_ctx *ctx)
 	}
 
 	ctx->pix_proc = ret;
+	ctx->use_pix_proc = true;
 
 	return 0;
 }
 
 void cal_ctx_unprepare(struct cal_ctx *ctx)
 {
-	cal_release_pix_proc(ctx->cal, ctx->pix_proc);
+	if (ctx->use_pix_proc)
+		cal_release_pix_proc(ctx->cal, ctx->pix_proc);
 }
 
 void cal_ctx_start(struct cal_ctx *ctx)
@@ -489,7 +491,8 @@ void cal_ctx_start(struct cal_ctx *ctx)
 
 	/* Configure the CSI-2, pixel processing and write DMA contexts. */
 	cal_ctx_csi2_config(ctx);
-	cal_ctx_pix_proc_config(ctx);
+	if (ctx->use_pix_proc)
+		cal_ctx_pix_proc_config(ctx);
 	cal_ctx_wr_dma_config(ctx);
 
 	/* Enable IRQ_WDMA_END and IRQ_WDMA_START. */
@@ -530,7 +533,8 @@ void cal_ctx_stop(struct cal_ctx *ctx)
 	cal_write(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx), 0);
 
 	/* Disable pix proc */
-	cal_write(ctx->cal, CAL_PIX_PROC(ctx->pix_proc), 0);
+	if (ctx->use_pix_proc)
+		cal_write(ctx->cal, CAL_PIX_PROC(ctx->pix_proc), 0);
 }
 
 /* ------------------------------------------------------------------
diff --git a/drivers/media/platform/ti-vpe/cal.h b/drivers/media/platform/ti-vpe/cal.h
index 5d8b3193be7d..d7cc399f47da 100644
--- a/drivers/media/platform/ti-vpe/cal.h
+++ b/drivers/media/platform/ti-vpe/cal.h
@@ -223,6 +223,8 @@ struct cal_ctx {
 	u8			cport;
 	u8			csi2_ctx;
 	u8			pix_proc;
+
+	bool			use_pix_proc;
 };
 
 extern unsigned int cal_debug;
-- 
2.25.1


  parent reply index

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20 12:03 [PATCH v2 00/35] media: ti-vpe: cal: prepare for multistream support Tomi Valkeinen
2021-04-20 12:03 ` [PATCH v2 01/35] media: ti-vpe: cal: add g/s_parm for legacy API Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 02/35] media: ti-vpe: cal: fix error handling in cal_camerarx_create Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 03/35] media: ti-vpe: cal: remove unused cal_camerarx->dev field Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 04/35] media: ti-vpe: cal: rename "sensor" to "source" Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 05/35] media: ti-vpe: cal: move global config from cal_ctx_wr_dma_config to runtime resume Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 06/35] media: ti-vpe: cal: use v4l2_get_link_freq Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 07/35] media: ti-vpe: cal: add cal_ctx_prepare/unprepare Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 08/35] media: ti-vpe: cal: change index and cport to u8 Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 09/35] media: ti-vpe: cal: Add CSI2 context Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 10/35] media: ti-vpe: cal: Add pixel processing context Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 11/35] media: ti-vpe: cal: rename cal_ctx->index to dma_ctx Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 12/35] media: ti-vpe: cal: rename CAL_HL_IRQ_MASK Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 13/35] media: ti-vpe: cal: clean up CAL_CSI2_VC_IRQ_* macros Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 14/35] media: ti-vpe: cal: catch VC errors Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 15/35] media: ti-vpe: cal: remove wait when stopping camerarx Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 16/35] media: ti-vpe: cal: disable csi2 ctx and pix proc at ctx_stop Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 17/35] media: ti-vpe: cal: allocate pix proc dynamically Tomi Valkeinen
2021-04-20 12:04 ` Tomi Valkeinen [this message]
2021-04-20 12:04 ` [PATCH v2 19/35] media: ti-vpe: cal: add cal_ctx_wr_dma_enable and fix a race Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 20/35] media: ti-vpe: cal: add vc and datatype fields to cal_ctx Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 21/35] media: ti-vpe: cal: handle cal_ctx_v4l2_register error Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 22/35] media: ti-vpe: cal: set field always to V4L2_FIELD_NONE Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 23/35] media: ti-vpe: cal: fix typo in a comment Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 24/35] media: ti-vpe: cal: add mbus_code support to cal_mc_enum_fmt_vid_cap Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 25/35] media: ti-vpe: cal: rename non-MC funcs to cal_legacy_* Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 26/35] media: ti-vpe: cal: init ctx->v_fmt correctly in MC mode Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 27/35] media: ti-vpe: cal: remove cal_camerarx->fmtinfo Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 28/35] media: ti-vpe: cal: support 8 DMA contexts Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 29/35] media: ti-vpe: cal: cleanup phy iteration in cal_remove Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 30/35] media: ti-vpe: cal: fix ctx uninitialization Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 31/35] media: ti-vpe: cal: fix queuing of the initial buffer Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 32/35] media: ti-vpe: cal: use CSI-2 frame number Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 33/35] media: ti-vpe: cal: add camerarx locking Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 34/35] media: ti-vpe: cal: add camerarx enable/disable refcounting Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 35/35] media: ti-vpe: cal: allow more than 1 source pads Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210420120433.902394-19-tomi.valkeinen@ideasonboard.com \
    --to=tomi.valkeinen@ideasonboard.com \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=p.yadav@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Media Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-media/0 linux-media/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-media linux-media/ https://lore.kernel.org/linux-media \
		linux-media@vger.kernel.org
	public-inbox-index linux-media

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-media


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git