linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/3] media: imx: add support for imx8mq MIPI RX
@ 2021-06-08 10:41 Martin Kepplinger
  2021-06-08 10:41 ` [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Martin Kepplinger @ 2021-06-08 10:41 UTC (permalink / raw)
  To: martin.kepplinger, festevam, krzk, laurent.pinchart
  Cc: devicetree, kernel, kernel, linux-arm-kernel, linux-imx,
	linux-kernel, linux-media, linux-staging, mchehab, phone-devel,
	robh, shawnguo, slongerbeam

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.

Thanks Laurent who helped a lot. I'm happy for any feedback,

                           martin

revision history
----------------
v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t


Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 161 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 102 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 997 ++++++++++++++++++
 4 files changed, 1261 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
  2021-06-08 10:41 [PATCH v3 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
@ 2021-06-08 10:41 ` Martin Kepplinger
  2021-06-10 17:02   ` Rob Herring
  2021-06-08 10:41 ` [PATCH v3 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
  2021-06-08 10:41 ` [PATCH v3 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
  2 siblings, 1 reply; 6+ messages in thread
From: Martin Kepplinger @ 2021-06-08 10:41 UTC (permalink / raw)
  To: martin.kepplinger, festevam, krzk, laurent.pinchart
  Cc: devicetree, kernel, kernel, linux-arm-kernel, linux-imx,
	linux-kernel, linux-media, linux-staging, mchehab, phone-devel,
	robh, shawnguo, slongerbeam

The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 161 ++++++++++++++++++
 1 file changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..6eafdf803d36
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: pxl is the pixel clock (phy_ref up to 333Mhz).
+      - description: clko2 is the CLKO2 clock root.
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: pxl
+      - const: clko2
+
+  power-domains:
+    maxItems: 1
+
+  reset:
+    description:
+      The phandle to the imx8mq reset-controller.
+    maxItems: 1
+
+  phy:
+    description:
+      The phandle to the imx8mq syscon iomux-gpr.
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                items:
+                  minItems: 1
+                  maxItems: 4
+                  items:
+                    - const: 1
+                    - const: 2
+                    - const: 3
+                    - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - reset
+  - phy
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                 <&clk IMX8MQ_CLK_CLKO2>;
+        clock-names = "core", "esc", "pxl", "clko2";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        reset = <&src>;
+        phy = <&iomuxc_gpr>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v3 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  2021-06-08 10:41 [PATCH v3 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
  2021-06-08 10:41 ` [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
@ 2021-06-08 10:41 ` Martin Kepplinger
  2021-06-08 10:41 ` [PATCH v3 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
  2 siblings, 0 replies; 6+ messages in thread
From: Martin Kepplinger @ 2021-06-08 10:41 UTC (permalink / raw)
  To: martin.kepplinger, festevam, krzk, laurent.pinchart
  Cc: devicetree, kernel, kernel, linux-arm-kernel, linux-imx,
	linux-kernel, linux-media, linux-staging, mchehab, phone-devel,
	robh, shawnguo, slongerbeam

The i.MX8MQ SoC includes a different MIPI CSI receiver than i.MX8MM so
add a driver to support it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 drivers/staging/media/imx/Makefile           |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c | 997 +++++++++++++++++++
 2 files changed, 998 insertions(+)
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 6ac33275cc97..19c2fc54d424 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
 
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-mipi-csis.o
+obj-$(CONFIG_VIDEO_IMX7_CSI) += imx8mq-mipi-csi2.o
diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
new file mode 100644
index 000000000000..6279dcd93ec0
--- /dev/null
+++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
@@ -0,0 +1,997 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Freescale i.MX8MQ SoC series MIPI-CSI2 receiver driver
+ *
+ * Copyright (C) 2021 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+#include <linux/interconnect.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+#define MIPI_CSI2_DRIVER_NAME			"imx8mq-mipi-csi2"
+#define MIPI_CSI2_SUBDEV_NAME			MIPI_CSI2_DRIVER_NAME
+
+#define MIPI_CSI2_PAD_SINK			0
+#define MIPI_CSI2_PAD_SOURCE			1
+#define MIPI_CSI2_PADS_NUM			2
+
+#define MIPI_CSI2_DEF_PIX_WIDTH			640
+#define MIPI_CSI2_DEF_PIX_HEIGHT		480
+
+#define MIPI_CSI2_RX_CSR_1_BASE_ADDR		0x30A70000
+#define MIPI_CSI2_RX_CSR_1_GPR_REG		0x88
+#define MIPI_CSI2_RX_CSR_1_HW_RESET_REG		0x4C
+#define MIPI_CSI2_RX_CSR_1_HW_RESET_VAL		7
+#define MIPI_CSI2_RX_CSR_2_BASE_ADDR		0x30B60000
+#define MIPI_CSI2_RX_CSR_2_GPR_REG		0xA4
+#define MIPI_CSI2_RX_CSR_2_HW_RESET_REG		0x50
+#define MIPI_CSI2_RX_CSR_2_HW_RESET_VAL		7
+
+/* Register map definition */
+
+/* i.MX8MQ CSI-2 controller CSR */
+#define CSI2RX_CFG_NUM_LANES			0x100
+#define CSI2RX_CFG_DISABLE_DATA_LANES		0x104
+#define CSI2RX_BIT_ERR				0x108
+#define CSI2RX_IRQ_STATUS			0x10C
+#define CSI2RX_IRQ_MASK				0x110
+#define CSI2RX_IRQ_MASK_ALL			0x1ff
+#define CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE	0x8
+#define CSI2RX_ULPS_STATUS			0x114
+#define CSI2RX_PPI_ERRSOT_HS			0x118
+#define CSI2RX_PPI_ERRSOTSYNC_HS		0x11C
+#define CSI2RX_PPI_ERRESC			0x120
+#define CSI2RX_PPI_ERRSYNCESC			0x124
+#define CSI2RX_PPI_ERRCONTROL			0x128
+#define CSI2RX_CFG_DISABLE_PAYLOAD_0		0x12C
+#define CSI2RX_CFG_DISABLE_PAYLOAD_1		0x130
+
+enum {
+	ST_POWERED	= 1,
+	ST_STREAMING	= 2,
+	ST_SUSPENDED	= 4,
+};
+
+static const char * const imx8mq_mipi_csi_clk_id[] = {
+	"core",
+	"esc",
+	"pxl",
+	"clko2",
+};
+
+#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
+#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
+#define	GPR_CSI2_1_HSEL			BIT(10)
+#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
+#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3F) << 2)
+
+struct csi_state {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk_bulk_data *clks;
+	struct reset_control *mrst;
+	struct regulator *mipi_phy_regulator;
+	u8 index;
+
+	struct v4l2_subdev sd;
+	struct media_pad pads[MIPI_CSI2_PADS_NUM];
+	struct v4l2_async_notifier notifier;
+	struct v4l2_subdev *src_sd;
+
+	struct v4l2_fwnode_bus_mipi_csi2 bus;
+	u32 hs_settle;
+	u32 clk_settle;
+
+	struct mutex lock;	/* Protect csi2_fmt, format_mbus and state */
+	const struct csi2_pix_format *csi2_fmt;
+	struct v4l2_mbus_framefmt format_mbus;
+	u32 state;
+
+	struct regmap *hw_reset;
+	u8 hw_reset_reg;
+
+	struct regmap *phy_gpr;
+	u8 phy_gpr_reg;
+
+	u32 send_level;
+
+	struct icc_path			*icc_path;
+	s32				icc_path_bw;
+};
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+struct csi2_pix_format {
+	u32 code;
+	u8 width;
+};
+
+static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
+	/* RAW (Bayer and greyscale) formats. */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_Y10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_Y12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.width = 14,
+	}
+};
+
+static const struct csi2_pix_format *find_csi2_format(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_formats); i++)
+		if (code == imx8mq_mipi_csi_formats[i].code)
+			return &imx8mq_mipi_csi_formats[i];
+	return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static inline void imx8mq_mipi_csi_write(struct csi_state *state, u32 reg, u32 val)
+{
+	writel(val, state->regs + reg);
+}
+
+static void imx8mq_mipi_csi_sw_reset(struct csi_state *state)
+{
+	regmap_update_bits(state->hw_reset, state->hw_reset_reg, 7, 7);
+	msleep(20);
+}
+
+static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
+{
+	if (!on) {
+		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
+		return;
+	}
+
+	regmap_update_bits(state->phy_gpr,
+			   state->phy_gpr_reg,
+			   0x3FFF,
+			   GPR_CSI2_1_RX_ENABLE |
+			   GPR_CSI2_1_VID_INTFC_ENB |
+			   GPR_CSI2_1_HSEL |
+			   GPR_CSI2_1_CONT_CLK_MODE |
+			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
+}
+
+static void imx8mq_mipi_csi_set_params(struct csi_state *state)
+{
+	int lanes = state->bus.num_data_lanes;
+	u32 val = 0;
+	int i;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_NUM_LANES, lanes - 1);
+
+	for (i = 0; i < lanes; i++)
+		val |= (1 << i);
+
+	val = 0xF & ~val;
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, val);
+
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK, CSI2RX_IRQ_MASK_ALL);
+
+	imx8mq_mipi_csi_write(state, 0x180, 1);
+	/* vid_vc */
+	imx8mq_mipi_csi_write(state, 0x184, 1);
+	imx8mq_mipi_csi_write(state, 0x188, state->send_level);
+}
+
+static int imx8mq_mipi_csi_clk_enable(struct csi_state *state)
+{
+	return clk_bulk_prepare_enable(ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				       state->clks);
+}
+
+static void imx8mq_mipi_csi_clk_disable(struct csi_state *state)
+{
+	clk_bulk_disable_unprepare(ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				   state->clks);
+}
+
+static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
+{
+	unsigned int i;
+	int ret;
+
+	state->clks = devm_kcalloc(state->dev,
+				   ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				   sizeof(*state->clks), GFP_KERNEL);
+
+	if (!state->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_clk_id); i++)
+		state->clks[i].id = imx8mq_mipi_csi_clk_id[i];
+
+	ret = devm_clk_bulk_get(state->dev, ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				state->clks);
+	return ret;
+}
+
+static void imx8mq_mipi_csi_start_stream(struct csi_state *state)
+{
+	imx8mq_mipi_csi_sw_reset(state);
+	imx8mq_mipi_csi_set_params(state);
+	imx8mq_mipi_csi_system_enable(state, true);
+}
+
+static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
+{
+	imx8mq_mipi_csi_system_enable(state, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static struct csi_state *mipi_sd_to_csi2_state(struct v4l2_subdev *sdev)
+{
+	return container_of(sdev, struct csi_state, sd);
+}
+
+static int imx8mq_mipi_csi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK,
+			      CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE);
+
+	if (enable) {
+		ret = pm_runtime_get_sync(state->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(state->dev);
+			return ret;
+		}
+		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
+			goto done;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (enable) {
+		if (state->state & ST_SUSPENDED) {
+			ret = -EBUSY;
+			goto unlock;
+		}
+
+		imx8mq_mipi_csi_start_stream(state);
+		ret = v4l2_subdev_call(state->src_sd, video, s_stream, 1);
+		if (ret < 0)
+			goto unlock;
+
+		state->state |= ST_STREAMING;
+	} else {
+		v4l2_subdev_call(state->src_sd, video, s_stream, 0);
+		ret = v4l2_subdev_call(state->src_sd, core, s_power, 0);
+		if (ret == -ENOIOCTLCMD)
+			ret = 0;
+		imx8mq_mipi_csi_stop_stream(state);
+		state->state &= ~ST_STREAMING;
+	}
+
+unlock:
+	mutex_unlock(&state->lock);
+
+done:
+	if (!enable || ret < 0)
+		pm_runtime_put(state->dev);
+
+	return ret;
+}
+
+static struct v4l2_mbus_framefmt *
+imx8mq_mipi_csi_get_format(struct csi_state *state,
+			   struct v4l2_subdev_pad_config *cfg,
+			   enum v4l2_subdev_format_whence which,
+			   unsigned int pad)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(&state->sd, cfg, pad);
+
+	return &state->format_mbus;
+}
+
+static int imx8mq_mipi_csi_init_cfg(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_pad_config *cfg)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt_sink;
+	struct v4l2_mbus_framefmt *fmt_source;
+	enum v4l2_subdev_format_whence which;
+
+	which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt_sink = imx8mq_mipi_csi_get_format(state, cfg, which, MIPI_CSI2_PAD_SINK);
+
+	fmt_sink->code = MEDIA_BUS_FMT_SGBRG10_1X10;
+	fmt_sink->width = MIPI_CSI2_DEF_PIX_WIDTH;
+	fmt_sink->height = MIPI_CSI2_DEF_PIX_HEIGHT;
+	fmt_sink->field = V4L2_FIELD_NONE;
+
+	fmt_sink->colorspace = V4L2_COLORSPACE_RAW;
+	fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
+					      fmt_sink->ycbcr_enc);
+
+	/*
+	 * When called from imx8mq_mipi_csi_subdev_init() to initialize the
+	 * active configuration, cfg is NULL, which indicates there's no source
+	 * pad configuration to set.
+	 */
+	if (!cfg)
+		return 0;
+
+	fmt_source = imx8mq_mipi_csi_get_format(state, cfg, which,
+						MIPI_CSI2_PAD_SOURCE);
+	*fmt_source = *fmt_sink;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_get_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt;
+
+	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	sdformat->format = *fmt;
+
+	mutex_unlock(&state->lock);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
+					  struct v4l2_subdev_pad_config *cfg,
+					  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/*
+	 * We can't transcode in any way, the source format is identical
+	 * to the sink format.
+	 */
+	if (code->pad == MIPI_CSI2_PAD_SOURCE) {
+		struct v4l2_mbus_framefmt *fmt;
+
+		if (code->index > 0)
+			return -EINVAL;
+
+		fmt = imx8mq_mipi_csi_get_format(state, cfg, code->which,
+						 code->pad);
+		code->code = fmt->code;
+		return 0;
+	}
+
+	if (code->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	if (code->index >= ARRAY_SIZE(imx8mq_mipi_csi_formats))
+		return -EINVAL;
+
+	code->code = imx8mq_mipi_csi_formats[code->index].code;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_set_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct csi2_pix_format const *csi2_fmt;
+	struct v4l2_mbus_framefmt *fmt;
+
+	/*
+	 * The device can't transcode in any way, the source format can't be
+	 * modified.
+	 */
+	if (sdformat->pad == MIPI_CSI2_PAD_SOURCE)
+		return imx8mq_mipi_csi_get_fmt(sd, cfg, sdformat);
+
+	if (sdformat->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	csi2_fmt = find_csi2_format(sdformat->format.code);
+	if (!csi2_fmt) {
+		dev_err(state->dev, "no format found based on code %d\n",
+			sdformat->format.code);
+		csi2_fmt = &imx8mq_mipi_csi_formats[0];
+	}
+
+	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	fmt->code = csi2_fmt->code;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
+
+	sdformat->format = *fmt;
+
+	/* Propagate the format from sink to source. */
+	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
+					 MIPI_CSI2_PAD_SOURCE);
+	*fmt = sdformat->format;
+
+	/* Store the CSI2 format descriptor for active formats. */
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		state->csi2_fmt = csi2_fmt;
+
+	mutex_unlock(&state->lock);
+
+	/* https://community.nxp.com/t5/i-MX-Processors/Explenation-for-HS-SETTLE-parameter-in-MIPI-CSI-D-PHY-registers/m-p/764275/highlight/true#M118744 */
+	if (sdformat->format.width * sdformat->format.height > 720 * 480)
+		state->hs_settle = 0x9;
+	else
+		state->hs_settle = 0x14;
+
+	state->send_level = 64;
+
+	dev_dbg(state->dev,
+		"%s: format %dx%d send_level %d hs_settle 0x%X\n", __func__,
+		sdformat->format.width, sdformat->format.height,
+		state->send_level, state->hs_settle);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx8mq_mipi_csi_video_ops = {
+	.s_stream	= imx8mq_mipi_csi_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx8mq_mipi_csi_pad_ops = {
+	.init_cfg		= imx8mq_mipi_csi_init_cfg,
+	.enum_mbus_code		= imx8mq_mipi_csi_enum_mbus_code,
+	.get_fmt		= imx8mq_mipi_csi_get_fmt,
+	.set_fmt		= imx8mq_mipi_csi_set_fmt,
+};
+
+static const struct v4l2_subdev_ops imx8mq_mipi_csi_subdev_ops = {
+	.video	= &imx8mq_mipi_csi_video_ops,
+	.pad	= &imx8mq_mipi_csi_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+static int imx8mq_mipi_csi_link_setup(struct media_entity *entity,
+				      const struct media_pad *local_pad,
+				      const struct media_pad *remote_pad,
+				      u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_subdev *remote_sd;
+
+	/* We only care about the link to the source. */
+	if (!(local_pad->flags & MEDIA_PAD_FL_SINK))
+		return 0;
+
+	remote_sd = media_entity_to_v4l2_subdev(remote_pad->entity);
+
+	if (flags & MEDIA_LNK_FL_ENABLED) {
+		if (state->src_sd)
+			return -EBUSY;
+
+		state->src_sd = remote_sd;
+	} else {
+		state->src_sd = NULL;
+	}
+
+	return 0;
+}
+
+static const struct media_entity_operations imx8mq_mipi_csi_entity_ops = {
+	.link_setup	= imx8mq_mipi_csi_link_setup,
+	.link_validate	= v4l2_subdev_link_validate,
+	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async subdev notifier
+ */
+
+static struct csi_state *
+mipi_notifier_to_csi2_state(struct v4l2_async_notifier *n)
+{
+	return container_of(n, struct csi_state, notifier);
+}
+
+static int imx8mq_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
+					struct v4l2_subdev *sd,
+					struct v4l2_async_subdev *asd)
+{
+	struct csi_state *state = mipi_notifier_to_csi2_state(notifier);
+	struct media_pad *sink = &state->sd.entity.pads[MIPI_CSI2_PAD_SINK];
+
+	return v4l2_create_fwnode_links_to_pad(sd, sink, 0);
+}
+
+static const struct v4l2_async_notifier_operations imx8mq_mipi_csi_notify_ops = {
+	.bound = imx8mq_mipi_csi_notify_bound,
+};
+
+static int imx8mq_mipi_csi_async_register(struct csi_state *state)
+{
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	struct v4l2_async_subdev *asd;
+	struct fwnode_handle *ep;
+	unsigned int i;
+	int ret;
+
+	v4l2_async_notifier_init(&state->notifier);
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
+					     FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return -ENOTCONN;
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret)
+		goto err_parse;
+
+	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
+		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
+			dev_err(state->dev,
+				"data lanes reordering is not supported");
+			ret = -EINVAL;
+			goto err_parse;
+		}
+	}
+
+	state->bus = vep.bus.mipi_csi2;
+
+	dev_dbg(state->dev, "data lanes: %d flags: 0x%08X\n",
+		state->bus.num_data_lanes,
+		state->bus.flags);
+
+	asd = v4l2_async_notifier_add_fwnode_remote_subdev(&state->notifier,
+							   ep, struct v4l2_async_subdev);
+	if (IS_ERR(asd)) {
+		ret = PTR_ERR(asd);
+		goto err_parse;
+	}
+
+	fwnode_handle_put(ep);
+
+	state->notifier.ops = &imx8mq_mipi_csi_notify_ops;
+
+	ret = v4l2_async_subdev_notifier_register(&state->sd, &state->notifier);
+	if (ret)
+		return ret;
+
+	return v4l2_async_register_subdev(&state->sd);
+
+err_parse:
+	fwnode_handle_put(ep);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	mutex_lock(&state->lock);
+
+	if (state->state & ST_POWERED) {
+		imx8mq_mipi_csi_stop_stream(state);
+		imx8mq_mipi_csi_clk_disable(state);
+		state->state &= ~ST_POWERED;
+		if (!runtime)
+			state->state |= ST_SUSPENDED;
+	}
+
+	mutex_unlock(&state->lock);
+
+	ret = icc_set_bw(state->icc_path, 0, 0);
+	if (ret)
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
+	if (ret) {
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (!runtime && !(state->state & ST_SUSPENDED))
+		goto unlock;
+
+	if (!(state->state & ST_POWERED)) {
+		state->state |= ST_POWERED;
+		ret = imx8mq_mipi_csi_clk_enable(state);
+	}
+	if (state->state & ST_STREAMING)
+		imx8mq_mipi_csi_start_stream(state);
+
+	state->state &= ~ST_SUSPENDED;
+
+unlock:
+	mutex_unlock(&state->lock);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int __maybe_unused imx8mq_mipi_csi_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, true);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, true);
+}
+
+static const struct dev_pm_ops imx8mq_mipi_csi_pm_ops = {
+	SET_RUNTIME_PM_OPS(imx8mq_mipi_csi_runtime_suspend,
+			   imx8mq_mipi_csi_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(imx8mq_mipi_csi_suspend, imx8mq_mipi_csi_resume)
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe/remove & platform driver
+ */
+
+static int imx8mq_mipi_csi_subdev_init(struct csi_state *state)
+{
+	struct v4l2_subdev *sd = &state->sd;
+
+	v4l2_subdev_init(sd, &imx8mq_mipi_csi_subdev_ops);
+	sd->owner = THIS_MODULE;
+	snprintf(sd->name, sizeof(sd->name), "%s.%d",
+		 MIPI_CSI2_SUBDEV_NAME, state->index);
+
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sd->ctrl_handler = NULL;
+
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &imx8mq_mipi_csi_entity_ops;
+
+	sd->dev = state->dev;
+
+	state->csi2_fmt = &imx8mq_mipi_csi_formats[0];
+	imx8mq_mipi_csi_init_cfg(sd, NULL);
+
+	state->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
+					 | MEDIA_PAD_FL_MUST_CONNECT;
+	state->pads[MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE
+					   | MEDIA_PAD_FL_MUST_CONNECT;
+	return media_entity_pads_init(&sd->entity, MIPI_CSI2_PADS_NUM,
+				      state->pads);
+}
+
+static void imx8mq_mipi_csi_release_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	icc_put(state->icc_path);
+}
+
+static int imx8mq_mipi_csi_init_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/* Optional interconnect request */
+	state->icc_path = of_icc_get(&pdev->dev, "dram");
+	if (IS_ERR_OR_NULL(state->icc_path))
+		return PTR_ERR_OR_ZERO(state->icc_path);
+
+	state->icc_path_bw = MBps_to_icc(700);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
+{
+	struct device *dev = state->dev;
+	struct device_node *np = state->dev->of_node;
+	struct device_node *node;
+	phandle ph;
+	int ret = 0;
+	const __be32 *addr;
+	int len;
+	int reg;
+
+	/* data for given CSI port */
+	addr = of_get_property(np, "reg", &len);
+	if (!addr) {
+		dev_err(dev, "no reg property found\n");
+		return -EINVAL;
+	}
+
+	reg = be32_to_cpup(addr);
+
+	if ((reg >> 16) == MIPI_CSI2_RX_CSR_1_BASE_ADDR >> 16) {
+		state->phy_gpr_reg = MIPI_CSI2_RX_CSR_1_GPR_REG;
+		state->hw_reset_reg = MIPI_CSI2_RX_CSR_1_HW_RESET_REG;
+	} else if ((reg >> 16) == MIPI_CSI2_RX_CSR_2_BASE_ADDR >> 16) {
+		state->phy_gpr_reg = MIPI_CSI2_RX_CSR_2_GPR_REG;
+		state->hw_reset_reg = MIPI_CSI2_RX_CSR_2_HW_RESET_REG;
+	}
+
+	/* phy-reset */
+	ret = of_property_read_u32(np, "reset", &ph);
+	if (ret) {
+		dev_err(dev, "no reset property found: %d\n", ret);
+		return ret;
+	}
+
+	node = of_find_node_by_phandle(ph);
+	if (!node) {
+		ret = -ENODEV;
+		dev_err(dev, "Error finding reset node by phandle\n");
+		goto out;
+	}
+	state->hw_reset = syscon_node_to_regmap(node);
+	if (IS_ERR(state->hw_reset)) {
+		ret = PTR_ERR(state->hw_reset);
+		dev_err(dev, "failed to get src regmap: %pe\n", state->hw_reset);
+		goto out;
+	}
+	of_node_put(node);
+
+	/* phy-gpr */
+	ret = of_property_read_u32(np, "phy", &ph);
+	if (ret) {
+		dev_err(dev, "no phy property found: %d\n", ret);
+		return ret;
+	}
+
+	node = of_find_node_by_phandle(ph);
+	if (!node) {
+		ret = -ENODEV;
+		dev_err(dev, "Error finding phy node by phandle\n");
+		goto out;
+	}
+	state->phy_gpr = syscon_node_to_regmap(node);
+	if (IS_ERR(state->phy_gpr)) {
+		ret = PTR_ERR(state->phy_gpr);
+		dev_err(dev, "failed to get gpr regmap: %pe\n", state->hw_reset);
+		goto out;
+	}
+
+out:
+	of_node_put(node);
+	return ret;
+}
+
+static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct csi_state *state;
+	int ret;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	mutex_init(&state->lock);
+
+	state->dev = dev;
+
+	ret = imx8mq_mipi_csi_parse_dt(state);
+	if (ret < 0) {
+		dev_err(dev, "Failed to parse device tree: %d\n", ret);
+		return ret;
+	}
+
+	/* Acquire resources. */
+	state->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	ret = imx8mq_mipi_csi_clk_get(state);
+	if (ret < 0)
+		return ret;
+
+	/* Initialize and register the subdev. */
+	ret = imx8mq_mipi_csi_subdev_init(state);
+	if (ret < 0)
+		goto disable_clock;
+
+	platform_set_drvdata(pdev, &state->sd);
+
+	ret = imx8mq_mipi_csi_async_register(state);
+	if (ret < 0) {
+		dev_err(dev, "async register failed: %d\n", ret);
+		goto cleanup;
+	}
+
+	ret = imx8mq_mipi_csi_init_icc(pdev);
+	if (ret)
+		goto cleanup;
+
+	/* Enable runtime PM. */
+	pm_runtime_enable(dev);
+	if (!pm_runtime_enabled(dev)) {
+		ret = imx8mq_mipi_csi_pm_resume(dev, true);
+		if (ret < 0) {
+			imx8mq_mipi_csi_release_icc(pdev);
+			goto cleanup;
+		}
+	}
+
+	dev_info(dev, "%s with %d mipi data-lanes\n",
+		 (state->phy_gpr_reg == MIPI_CSI2_RX_CSR_1_GPR_REG ? "CSI1" : "CSI2"),
+		 state->bus.num_data_lanes);
+
+	return 0;
+
+cleanup:
+	media_entity_cleanup(&state->sd.entity);
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+disable_clock:
+	imx8mq_mipi_csi_clk_disable(state);
+	mutex_destroy(&state->lock);
+
+	return ret;
+}
+
+static int imx8mq_mipi_csi_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+
+	pm_runtime_disable(&pdev->dev);
+	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
+	imx8mq_mipi_csi_clk_disable(state);
+	media_entity_cleanup(&state->sd.entity);
+	mutex_destroy(&state->lock);
+	pm_runtime_set_suspended(&pdev->dev);
+	imx8mq_mipi_csi_release_icc(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
+	{ .compatible = "fsl,imx8mq-mipi-csi2",},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
+
+static struct platform_driver imx8mq_mipi_csi_driver = {
+	.probe		= imx8mq_mipi_csi_probe,
+	.remove		= imx8mq_mipi_csi_remove,
+	.driver		= {
+		.of_match_table = imx8mq_mipi_csi_of_match,
+		.name		= MIPI_CSI2_DRIVER_NAME,
+		.pm		= &imx8mq_mipi_csi_pm_ops,
+	},
+};
+
+module_platform_driver(imx8mq_mipi_csi_driver);
+
+MODULE_DESCRIPTION("i.MX8MQ MIPI CSI-2 receiver driver");
+MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@puri.sm>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx8mq-mipi-csi2");
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v3 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
  2021-06-08 10:41 [PATCH v3 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
  2021-06-08 10:41 ` [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
  2021-06-08 10:41 ` [PATCH v3 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
@ 2021-06-08 10:41 ` Martin Kepplinger
  2021-06-09  7:52   ` Marco Felsch
  2 siblings, 1 reply; 6+ messages in thread
From: Martin Kepplinger @ 2021-06-08 10:41 UTC (permalink / raw)
  To: martin.kepplinger, festevam, krzk, laurent.pinchart
  Cc: devicetree, kernel, kernel, linux-arm-kernel, linux-imx,
	linux-kernel, linux-media, linux-staging, mchehab, phone-devel,
	robh, shawnguo, slongerbeam

Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2
receiver and the CSI Bridge that provides the user buffers, where the
existing driver can directly be used.

An image sensor is to be connected to the MIPIs' second port, described in
board files.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 102 ++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 91df9c5350ae..39955d6621f2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1099,6 +1099,108 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mipi_csi1: csi@30a70000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30a70000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				   <&clk IMX8MQ_CLK_CSI1_ESC>,
+				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				   <&clk IMX8MQ_CLK_CLKO2>;
+				clock-names = "core", "esc", "pxl", "clko2";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI1_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi1>;
+				reset = <&src>;
+				phy = <&iomuxc_gpr>;
+				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi1_mipi_ep: endpoint {
+							remote-endpoint = <&csi1_ep>;
+						};
+					};
+				};
+			};
+
+			csi1: csi@30a90000 {
+				compatible = "fsl,imx7-csi";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi1_ep: endpoint {
+						remote-endpoint = <&csi1_mipi_ep>;
+					};
+				};
+			};
+
+			mipi_csi2: csi@30b60000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30b60000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				   <&clk IMX8MQ_CLK_CSI2_ESC>,
+				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				   <&clk IMX8MQ_CLK_CLKO2>;
+				clock-names = "core", "esc", "pxl", "clko2";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI2_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi2>;
+				reset = <&src>;
+				phy = <&iomuxc_gpr>;
+				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi2_mipi_ep: endpoint {
+							remote-endpoint = <&csi2_ep>;
+						};
+					};
+				};
+			};
+
+			csi2: csi@30b80000 {
+				compatible = "fsl,imx7-csi";
+				reg = <0x30b80000 0x10000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi2_ep: endpoint {
+						remote-endpoint = <&csi2_mipi_ep>;
+					};
+				};
+			};
+
 			mu: mailbox@30aa0000 {
 				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
 				reg = <0x30aa0000 0x10000>;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
  2021-06-08 10:41 ` [PATCH v3 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
@ 2021-06-09  7:52   ` Marco Felsch
  0 siblings, 0 replies; 6+ messages in thread
From: Marco Felsch @ 2021-06-09  7:52 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: festevam, krzk, laurent.pinchart, devicetree, kernel, kernel,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, mchehab, phone-devel, robh, shawnguo, slongerbeam

Hi Martin,

On 21-06-08 12:41, Martin Kepplinger wrote:

...

> +			csi1: csi@30a90000 {
> +				compatible = "fsl,imx7-csi";

AFAIK an unwritten rule (at least for the iMX mach) is to specify the
SoC specific compatible and the compatible which is supported by the
driver already, so this should be:

compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";

This is very helpful if we need to handle some quirk for the imx8mq
later on.

Regards,
  Marco


> +				reg = <0x30a90000 0x10000>;
> +				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
> +				clock-names = "mclk";
> +				status = "disabled";
> +
> +				port {
> +					csi1_ep: endpoint {
> +						remote-endpoint = <&csi1_mipi_ep>;
> +					};
> +				};
> +			};
> +
> +			mipi_csi2: csi@30b60000 {
> +				compatible = "fsl,imx8mq-mipi-csi2";
> +				reg = <0x30b60000 0x1000>;
> +				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
> +				   <&clk IMX8MQ_CLK_CSI2_ESC>,
> +				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
> +				   <&clk IMX8MQ_CLK_CLKO2>;
> +				clock-names = "core", "esc", "pxl", "clko2";
> +				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
> +				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
> +				    <&clk IMX8MQ_CLK_CSI2_ESC>;
> +				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
> +				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +					<&clk IMX8MQ_SYS2_PLL_1000M>,
> +					<&clk IMX8MQ_SYS1_PLL_800M>;
> +				power-domains = <&pgc_mipi_csi2>;
> +				reset = <&src>;
> +				phy = <&iomuxc_gpr>;
> +				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
> +				interconnect-names = "dram";
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +
> +						csi2_mipi_ep: endpoint {
> +							remote-endpoint = <&csi2_ep>;
> +						};
> +					};
> +				};
> +			};
> +
> +			csi2: csi@30b80000 {
> +				compatible = "fsl,imx7-csi";
> +				reg = <0x30b80000 0x10000>;
> +				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
> +				clock-names = "mclk";
> +				status = "disabled";
> +
> +				port {
> +					csi2_ep: endpoint {
> +						remote-endpoint = <&csi2_mipi_ep>;
> +					};
> +				};
> +			};
> +
>  			mu: mailbox@30aa0000 {
>  				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
>  				reg = <0x30aa0000 0x10000>;
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
  2021-06-08 10:41 ` [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
@ 2021-06-10 17:02   ` Rob Herring
  0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2021-06-10 17:02 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: festevam, krzk, laurent.pinchart, devicetree, kernel, kernel,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, mchehab, phone-devel, shawnguo, slongerbeam

On Tue, Jun 08, 2021 at 12:41:26PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 161 ++++++++++++++++++
>  1 file changed, 161 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..6eafdf803d36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MQ MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> +
> +description: |-
> +  This binding covers the CSI-2 RX PHY and host controller included in the
> +  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> +  input imaging devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: core is the RX Controller Core Clock input. This clock
> +                     must be exactly equal to or faster than the receive
> +                     byteclock from the RX DPHY.
> +      - description: esc is the Rx Escape Clock. This must be the same escape
> +                     clock that the RX DPHY receives.
> +      - description: pxl is the pixel clock (phy_ref up to 333Mhz).
> +      - description: clko2 is the CLKO2 clock root.
> +                     See the reference manual for details.
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: esc
> +      - const: pxl
> +      - const: clko2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  reset:

resets

> +    description:
> +      The phandle to the imx8mq reset-controller.

Drop. What the reset controller is is out of scope for a binding.

> +    maxItems: 1
> +
> +  phy:

phys? Assuming this is using the PHY binding. If it is not, then why 
not?

> +    description:
> +      The phandle to the imx8mq syscon iomux-gpr.
> +    maxItems: 1
> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: dram
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                items:
> +                  minItems: 1
> +                  maxItems: 4
> +                  items:
> +                    - const: 1
> +                    - const: 2
> +                    - const: 3
> +                    - const: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - reset
> +  - phy
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interconnect/imx8mq.h>
> +
> +    csi@30a70000 {
> +        compatible = "fsl,imx8mq-mipi-csi2";
> +        reg = <0x30a70000 0x1000>;
> +        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                 <&clk IMX8MQ_CLK_CSI1_ESC>,
> +                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                 <&clk IMX8MQ_CLK_CLKO2>;
> +        clock-names = "core", "esc", "pxl", "clko2";
> +        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                          <&clk IMX8MQ_CLK_CSI1_ESC>;
> +        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
> +                                 <&clk IMX8MQ_SYS1_PLL_800M>;
> +        power-domains = <&pgc_mipi_csi1>;
> +        reset = <&src>;
> +        phy = <&iomuxc_gpr>;
> +        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> +        interconnect-names = "dram";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                imx8mm_mipi_csi_in: endpoint {
> +                    remote-endpoint = <&imx477_out>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                imx8mm_mipi_csi_out: endpoint {
> +                    remote-endpoint = <&csi_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.30.2

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-06-10 17:02 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-08 10:41 [PATCH v3 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
2021-06-08 10:41 ` [PATCH v3 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
2021-06-10 17:02   ` Rob Herring
2021-06-08 10:41 ` [PATCH v3 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
2021-06-08 10:41 ` [PATCH v3 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
2021-06-09  7:52   ` Marco Felsch

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).