From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: martin.kepplinger@puri.sm, broonie@kernel.org,
sakari.ailus@linux.intel.com
Cc: angus@akkea.ca, kernel@puri.sm, linux-kernel@vger.kernel.org,
linux-media@vger.kernel.org, linux-pm@vger.kernel.org,
mchehab@kernel.org
Subject: [PATCH v3] media: i2c: dw9714: add optional regulator support
Date: Mon, 29 Nov 2021 13:07:54 +0100 [thread overview]
Message-ID: <20211129120754.1766570-1-martin.kepplinger@puri.sm> (raw)
From: Angus Ainslie <angus@akkea.ca>
Allow the dw9714 to control a regulator and adjust suspend() and resume()
to support both runtime and system pm.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
revision history
----------------
v3: (thank you Mark and Sakari)
* use regulator_get() instead of regulator_get_optional()
v2: (thank you Mark)
* simplify the regulator_get_optional() error path
* fix regulator usage during probe()
https://lore.kernel.org/linux-media/20211126090107.1243558-1-martin.kepplinger@puri.sm/
v1:
https://lore.kernel.org/linux-media/20211125080922.978583-1-martin.kepplinger@puri.sm/
drivers/media/i2c/dw9714.c | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
index 3863dfeb8293..81170bbe0e55 100644
--- a/drivers/media/i2c/dw9714.c
+++ b/drivers/media/i2c/dw9714.c
@@ -5,6 +5,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
@@ -36,6 +37,7 @@ struct dw9714_device {
struct v4l2_ctrl_handler ctrls_vcm;
struct v4l2_subdev sd;
u16 current_val;
+ struct regulator *vcc;
};
static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
@@ -145,6 +147,16 @@ static int dw9714_probe(struct i2c_client *client)
if (dw9714_dev == NULL)
return -ENOMEM;
+ dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(dw9714_dev->vcc))
+ return PTR_ERR(dw9714_dev->vcc);
+
+ rval = regulator_enable(dw9714_dev->vcc);
+ if (rval < 0) {
+ dev_err(&client->dev, "failed to enable vcc: %d\n", rval);
+ return rval;
+ }
+
v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
@@ -200,6 +212,9 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
int ret, val;
+ if (pm_runtime_suspended(&client->dev))
+ return 0;
+
for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
val >= 0; val -= DW9714_CTRL_STEPS) {
ret = dw9714_i2c_write(client,
@@ -208,7 +223,12 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
}
- return 0;
+
+ ret = regulator_disable(dw9714_dev->vcc);
+ if (ret)
+ dev_err(dev, "Failed to disable vcc: %d\n", ret);
+
+ return ret;
}
/*
@@ -224,6 +244,16 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev)
struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
int ret, val;
+ if (pm_runtime_suspended(&client->dev))
+ return 0;
+
+ ret = regulator_enable(dw9714_dev->vcc);
+ if (ret) {
+ dev_err(dev, "Failed to enable vcc: %d\n", ret);
+ return ret;
+ }
+ usleep_range(1000, 2000);
+
for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
val += DW9714_CTRL_STEPS) {
--
2.30.2
next reply other threads:[~2021-11-29 12:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-29 12:07 Martin Kepplinger [this message]
2021-12-21 17:33 ` [PATCH v3] media: i2c: dw9714: add optional regulator support Martin Kepplinger
2022-01-20 8:04 ` Martin Kepplinger
2022-01-20 9:57 ` Sakari Ailus
2022-01-20 9:56 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211129120754.1766570-1-martin.kepplinger@puri.sm \
--to=martin.kepplinger@puri.sm \
--cc=angus@akkea.ca \
--cc=broonie@kernel.org \
--cc=kernel@puri.sm \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).