[PATCH 21/21] media: ov5640: Adjust format to bpp in s_fmt

[Jacopo Mondi <jacopo@jmondi.org>]

The ov5640 driver supports different sizes for different mbus_codes.
In particular:

- 8bpp modes: high resolution sizes (>= 1280x720)
- 16bpp modes: all sizes
- 24bpp modes: low resolutions sizes (< 1280x720)

Adjust the image sizes according to the above constraints.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 2978dabd1d54..49d0df80f71a 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2529,6 +2529,7 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
 				   enum ov5640_frame_rate fr,
 				   const struct ov5640_mode_info **new_mode)
 {
+	unsigned int bpp = ov5640_code_to_bpp(fmt->code);
 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
 	const struct ov5640_mode_info *mode;
 	int i;
@@ -2536,6 +2537,17 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
 	mode = ov5640_find_mode(sensor, fr, fmt->width, fmt->height, true);
 	if (!mode)
 		return -EINVAL;
+
+	/*
+	 * Adjust mode according to bpp:
+	 * - 8bpp modes work for resolution >= 1280x720
+	 * - 24bpp modes work resolution < 1280x720
+	 */
+	if (bpp == 8 && mode->crop.width < 1280)
+		mode = &ov5640_mode_data[OV5640_MODE_720P_1280_720];
+	else if (bpp == 24 && mode->crop.width > 1024)
+		mode = &ov5640_mode_data[OV5640_MODE_XGA_1024_768];
+
 	fmt->width = mode->crop.width;
 	fmt->height = mode->crop.height;
 
-- 
2.35.0