linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
To: jeanmichel.hautbois@ideasonboard.com
Cc: dave.stevenson@raspberrypi.com, devicetree@vger.kernel.org,
	kernel-list@raspberrypi.com, laurent.pinchart@ideasonboard.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org, lukasz@jany.st,
	mchehab@kernel.org, naush@raspberrypi.com, robh@kernel.org,
	tomi.valkeinen@ideasonboard.com,
	bcm-kernel-feedback-list@broadcom.com, stefan.wahren@i2se.com
Subject: [PATCH v5 03/11] dt-bindings: media: Add bindings for bcm2835-unicam
Date: Tue,  8 Feb 2022 16:50:19 +0100	[thread overview]
Message-ID: <20220208155027.891055-4-jeanmichel.hautbois@ideasonboard.com> (raw)
In-Reply-To: <20220208155027.891055-1-jeanmichel.hautbois@ideasonboard.com>

Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
camera interface.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
v4:
- make MAINTAINERS its own patch
- describe the reg and clocks correctly
- use a vendor entry for the number of data lanes
---
 .../bindings/media/brcm,bcm2835-unicam.yaml   | 117 ++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml

diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
new file mode 100644
index 000000000000..1938ace23b3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM283x Camera Interface (Unicam)
+
+maintainers:
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: |-
+  The Unicam block on BCM283x SoCs is the receiver for either
+  CSI-2 or CCP2 data from image sensors or similar devices.
+
+  The main platform using this SoC is the Raspberry Pi family of boards.  On
+  the Pi the VideoCore firmware can also control this hardware block, and
+  driving it from two different processors will cause issues.  To avoid this,
+  the firmware checks the device tree configuration during boot. If it finds
+  device tree nodes whose name starts with 'csi' then it will stop the firmware
+  accessing the block, and it can then safely be used via the device tree
+  binding.
+
+properties:
+  compatible:
+    const: brcm,bcm2835-unicam
+
+  reg:
+    items:
+      - description: Unicam block.
+      - description: Clock Manager Image (CMI) block.
+
+  reg-names:
+    items:
+      - const: unicam
+      - const: cmi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Clock to drive the LP state machine of Unicam.
+      - description: Clock for the VPU (core clock).
+
+  clock-names:
+    items:
+      - const: lp
+      - const: vpu
+
+  power-domains:
+    items:
+      - description: Unicam power domain
+
+  brcm,num-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 2, 4 ]
+    description: |
+      Number of CSI-2 data lanes supported by this Unicam instance. The number
+      of data lanes actively used is specified with the data-lanes endpoint
+      property.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+
+        required:
+          - data-lanes
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - brcm,num-data-lanes
+  - port
+
+additionalProperties: False
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/raspberrypi-power.h>
+    csi1: csi@7e801000 {
+        compatible = "brcm,bcm2835-unicam";
+        reg = <0x7e801000 0x800>,
+              <0x7e802004 0x4>;
+        reg-names = "unicam", "cmi";
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clocks BCM2835_CLOCK_CAM1>,
+                 <&firmware_clocks 4>;
+        clock-names = "lp", "vpu";
+        power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+        brcm,num-data-lanes = <2>;
+        port {
+                csi1_ep: endpoint {
+                        remote-endpoint = <&imx219_0>;
+                        data-lanes = <1 2>;
+                };
+        };
+    };
+...
-- 
2.32.0


  parent reply	other threads:[~2022-02-08 15:50 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08 15:50 [PATCH v5 00/11] Add support for BCM2835 camera interface (unicam) Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 01/11] media: v4l: Add V4L2-PIX-FMT-Y12P format Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 02/11] media: v4l: Add V4L2-PIX-FMT-Y14P format Jean-Michel Hautbois
2022-02-08 15:50 ` Jean-Michel Hautbois [this message]
2022-02-09 18:56   ` [PATCH v5 03/11] dt-bindings: media: Add bindings for bcm2835-unicam Rob Herring
2022-02-13 15:48   ` Stefan Wahren
2022-02-14  9:39     ` Maxime Ripard
2022-02-14  9:54       ` Laurent Pinchart
2022-02-14 11:32         ` Stefan Wahren
2022-02-21  7:10           ` Laurent Pinchart
2022-02-21 10:03             ` Maxime Ripard
2022-02-21 12:45             ` Stefan Wahren
2022-02-21 12:52               ` Laurent Pinchart
2022-02-25  8:19   ` Sakari Ailus
2022-02-08 15:50 ` [PATCH v5 04/11] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Jean-Michel Hautbois
2022-02-08 21:00   ` Stefan Wahren
2022-02-13 12:52     ` Laurent Pinchart
2022-02-13 11:17   ` Stefan Wahren
2022-02-13 12:49     ` Laurent Pinchart
2022-02-20 10:01   ` Stefan Wahren
2022-02-20 10:08     ` Laurent Pinchart
2022-02-21  9:55   ` Laurent Pinchart
2022-02-25  9:29   ` Sakari Ailus
2023-07-02 15:23     ` Laurent Pinchart
2023-07-02 18:18       ` Sakari Ailus
2023-07-02 21:45         ` Laurent Pinchart
2023-07-02 21:47           ` Laurent Pinchart
2023-07-02 21:56             ` Sakari Ailus
2023-07-02 22:01               ` Laurent Pinchart
2023-07-02 22:20                 ` Sakari Ailus
2023-07-02 22:28                   ` Laurent Pinchart
2023-07-02 22:33                     ` Sakari Ailus
2023-07-02 21:53           ` Sakari Ailus
2023-07-02 21:58             ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 05/11] media: MAINTAINERS: add bcm2835 unicam driver Jean-Michel Hautbois
2022-02-08 15:58   ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 06/11] ARM: dts: bcm2711: Add unicam CSI nodes Jean-Michel Hautbois
2022-02-13 10:35   ` Stefan Wahren
2022-02-13 13:51     ` Stefan Wahren
2022-02-08 15:50 ` [PATCH v5 07/11] media: imx219: Rename mbus codes array Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 08/11] media: imx219: Switch from open to init_cfg Jean-Michel Hautbois
2022-02-08 16:02   ` Laurent Pinchart
2022-02-08 16:05     ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 09/11] media: imx219: Introduce the set_routing operation Jean-Michel Hautbois
2022-02-21  7:17   ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 10/11] media: imx219: use a local v4l2_subdev to simplify reading Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 11/11] media: imx219: Add support for the V4L2 subdev active state Jean-Michel Hautbois
2022-02-21  7:25   ` Laurent Pinchart
2022-02-16 20:57 ` [PATCH v5 00/11] Add support for BCM2835 camera interface (unicam) Stefan Wahren
2022-02-20 14:30   ` Jean-Michel Hautbois
2022-02-26 17:18     ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220208155027.891055-4-jeanmichel.hautbois@ideasonboard.com \
    --to=jeanmichel.hautbois@ideasonboard.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel-list@raspberrypi.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=lukasz@jany.st \
    --cc=mchehab@kernel.org \
    --cc=naush@raspberrypi.com \
    --cc=robh@kernel.org \
    --cc=stefan.wahren@i2se.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).