From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: Manivannan Sadhasivam <mani@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org
Subject: [PATCH v3 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
Date: Tue, 23 Aug 2022 03:58:21 +0300 [thread overview]
Message-ID: <20220823005822.13805-2-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20220823005822.13805-1-laurent.pinchart@ideasonboard.com>
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add YAML devicetree binding for IMX296 CMOS image sensor. Let's also
add MAINTAINERS entry for the binding and driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
- Add model-specific compatible strings
Changes since v4 (in separate series):
- Rename to sony,imx296.yaml
- Add Laurent Pinchart as maintainer
- Rename power supplies
- Rename clock to INCK
- Drop clock-frequency property
- Reference OF graph DT schema
- Mention reset GPIO pin name
- Fix schema $id
- Fix port
---
.../bindings/media/i2c/sony,imx296.yaml | 106 ++++++++++++++++++
MAINTAINERS | 8 ++
2 files changed, 114 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
new file mode 100644
index 000000000000..65ad9c100e45
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+ The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+ sensor with square pixel array and 1.58 M effective pixels. This chip
+ features a global shutter with variable charge-integration time. It is
+ programmable through I2C and 4-wire interfaces. The sensor output is
+ available via CSI-2 serial data output (1 Lane).
+
+properties:
+ compatible:
+ enum:
+ - sony,imx296
+ - sony,imx296ll
+ - sony,imx296lq
+ description:
+ The IMX296 sensor exists in two different models, a colour variant
+ (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the
+ model through registers, allowing for auto-detection with a common
+ "sony,imx296" compatible string. However, some camera modules disable the
+ ability to read the sensor model register, which disables this feature.
+ In those cases, the exact model needs to be specified as "sony,imx296ll"
+ or "sony,imx296lq".
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
+ items:
+ - const: inck
+
+ avdd-supply:
+ description: Analog power supply (3.3V)
+
+ dvdd-supply:
+ description: Digital power supply (1.2V)
+
+ ovdd-supply:
+ description: Interface power supply (1.8V)
+
+ reset-gpios:
+ description: Sensor reset (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - avdd-supply
+ - dvdd-supply
+ - ovdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx296: camera-sensor@1a {
+ compatible = "sony,imx296";
+ reg = <0x1a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_rear_default>;
+
+ clocks = <&gcc 90>;
+ clock-names = "inck";
+
+ avdd-supply = <&camera_vdda_3v3>;
+ dvdd-supply = <&camera_vddd_1v2>;
+ ovdd-supply = <&camera_vddo_1v8>;
+
+ reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+ port {
+ imx296_ep: endpoint {
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d7f64dc0efe..34e5b6e43f88 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18959,6 +18959,14 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/imx290.txt
F: drivers/media/i2c/imx290.c
+SONY IMX296 SENSOR DRIVER
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
+
SONY IMX319 SENSOR DRIVER
M: Bingbu Cao <bingbu.cao@intel.com>
L: linux-media@vger.kernel.org
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-08-23 0:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-23 0:58 [PATCH v3 0/2] media: i2c: IMX296 camera sensor support Laurent Pinchart
2022-08-23 0:58 ` Laurent Pinchart [this message]
2022-08-23 0:58 ` [PATCH v3 2/2] media: i2c: IMX296 camera sensor driver Laurent Pinchart
-- strict thread matches above, loose matches on Subject: below --
2019-10-25 17:59 [PATCH v3 0/2] Add IMX296 CMOS image sensor support Manivannan Sadhasivam
2019-10-25 17:59 ` [PATCH v3 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding Manivannan Sadhasivam
2019-10-28 12:21 ` Sakari Ailus
2019-10-29 22:12 ` Rob Herring
2019-10-30 6:45 ` Manivannan Sadhasivam
2019-10-29 22:09 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220823005822.13805-2-laurent.pinchart@ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-media@vger.kernel.org \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).