From: imv4bel@gmail.com
To: mchehab@kernel.org
Cc: Hyunwoo Kim <imv4bel@gmail.com>,
kernel@tuxforce.de, linux-media@vger.kernel.org,
linux-usb@vger.kernel.org, cai.huoqing@linux.dev, tiwai@suse.de
Subject: [PATCH 0/4] Fix multiple race condition vulnerabilities in dvb-core and device driver
Date: Tue, 15 Nov 2022 05:18:18 -0800 [thread overview]
Message-ID: <20221115131822.6640-1-imv4bel@gmail.com> (raw)
From: Hyunwoo Kim <imv4bel@gmail.com>
Dear,
This patch set is a security patch for various race condition vulnerabilities that occur
in 'dvb-core' and 'ttusb_dec', a dvb-based device driver.
# 1. media: dvb-core: Fix use-after-free due to race condition occurring in dvb_frontend
This is a security patch for a race condition that occurs in the dvb_frontend system of dvb-core.
The race condition that occurs here will occur with _any_ device driver using dvb_frontend.
The race conditions that occur in dvb_frontend are as follows
(Description is based on drivers/media/usb/as102/as102_drv.c using dvb_frontend):
```
cpu0 cpu1
1. open()
dvb_frontend_open()
dvb_frontend_get() // kref : 3
2. as102_usb_disconnect()
as102_dvb_unregister()
dvb_unregister_frontend()
dvb_frontend_put() // kref : 2
dvb_frontend_detach()
dvb_frontend_put() // kref : 1
3. close()
__fput()
dvb_frontend_release()
dvb_frontend_put() // kref : 0
dvb_frontend_free()
__dvb_frontend_free()
dvb_free_device()
kfree (dvbdev->fops);
...
fops_put(file->f_op); // UAF!!
```
UAF occurs in the following order: '.probe -> open() -> .disconnect -> close()'.
The root cause of this is that wake_up() for dvbdev->wait_queue is implemented in the
dvb_frontend_release() function, but wait_event() is not implemented in the dvb_frontend_stop() function.
The KASAN log caused by this is as follows:
```
[ 60.754938] ==================================================================
[ 60.754942] BUG: KASAN: use-after-free in __fput+0xa55/0xaf0
[ 60.754945] Read of size 8 at addr ffff888134ddf000 by task as102_test/2139
[ 60.754949] CPU: 3 PID: 2139 Comm: as102_test Not tainted 6.1.0-rc2+ #16
[ 60.754951] Hardware name: Gigabyte Technology Co., Ltd. B460MDS3H/B460M DS3H, BIOS F3 05/27/2020
[ 60.754953] Call Trace:
[ 60.754954] <TASK>
[ 60.754956] dump_stack_lvl+0x49/0x63
[ 60.754958] print_report+0x177/0x46e
[ 60.754962] ? kasan_complete_mode_report_info+0x7c/0x210
[ 60.754965] ? __fput+0xa55/0xaf0
[ 60.754970] kasan_report+0xb0/0x140
[ 60.754976] ? __fput+0xa55/0xaf0
[ 60.754979] __asan_report_load8_noabort+0x14/0x20
[ 60.754982] __fput+0xa55/0xaf0
[ 60.754985] ____fput+0xe/0x20
[ 60.754987] task_work_run+0x153/0x240
[ 60.754991] ? task_work_cancel+0x20/0x20
[ 60.754994] ? fput+0xab/0x140
[ 60.754997] exit_to_user_mode_prepare+0x18f/0x1a0
[ 60.754999] syscall_exit_to_user_mode+0x26/0x50
[ 60.755003] do_syscall_64+0x69/0x90
[ 60.755005] ? do_syscall_64+0x69/0x90
[ 60.755008] ? debug_smp_processor_id+0x17/0x20
[ 60.755010] ? fpregs_assert_state_consistent+0x52/0xc0
[ 60.755013] ? exit_to_user_mode_prepare+0x49/0x1a0
[ 60.755015] ? irqentry_exit_to_user_mode+0x9/0x20
[ 60.755018] ? irqentry_exit+0x3b/0x50
[ 60.755021] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 60.755024] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 60.755027] RIP: 0033:0x4537eb
[ 60.755029] Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a8 02 00 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 11 a9 02 00 8b 44
[ 60.755031] RSP: 002b:00007ff8c1c001a0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
[ 60.755034] RAX: 0000000000000000 RBX: 00007ff8c1c00640 RCX: 00000000004537eb
[ 60.755036] RDX: 0000000000000000 RSI: 00007ff8bc000b70 RDI: 0000000000000003
[ 60.755038] RBP: 00007ff8c1c001d0 R08: 0000000000000000 R09: 0000000000000000
[ 60.755040] R10: 000000000000000a R11: 0000000000000293 R12: 00007ff8c1c00640
[ 60.755042] R13: 0000000000000000 R14: 000000000041b290 R15: 00007ff8c1400000
[ 60.755044] </TASK>
[ 60.755047] Allocated by task 2114:
[ 60.755049] kasan_save_stack+0x26/0x50
[ 60.755052] kasan_set_track+0x25/0x40
[ 60.755054] kasan_save_alloc_info+0x1e/0x30
[ 60.755056] __kasan_kmalloc+0xb4/0xc0
[ 60.755058] __kmalloc_node_track_caller+0x66/0x160
[ 60.755061] kmemdup+0x23/0x50
[ 60.755063] dvb_register_device+0x1cd/0x15c0 [dvb_core]
[ 60.755070] dvb_register_frontend+0x3cb/0x630 [dvb_core]
[ 60.755078] as102_dvb_register+0x335/0x4d0 [dvb_as102]
[ 60.755083] as102_usb_probe.cold+0x680/0x6eb [dvb_as102]
[ 60.755087] usb_probe_interface+0x266/0x740
[ 60.755089] really_probe+0x1fa/0xa80
[ 60.755092] __driver_probe_device+0x2cb/0x490
[ 60.755094] driver_probe_device+0x4e/0x140
[ 60.755096] __driver_attach+0x1a3/0x520
[ 60.755098] bus_for_each_dev+0x11e/0x1c0
[ 60.755100] driver_attach+0x3d/0x60
[ 60.755102] bus_add_driver+0x449/0x5a0
[ 60.755103] driver_register+0x219/0x390
[ 60.755105] usb_register_driver+0x228/0x400
[ 60.755107] 0xffffffffc04c8023
[ 60.755110] do_one_initcall+0x97/0x310
[ 60.755113] do_init_module+0x19a/0x630
[ 60.755115] load_module+0x6ca4/0x7d90
[ 60.755117] __do_sys_finit_module+0x134/0x1d0
[ 60.755119] __x64_sys_finit_module+0x72/0xb0
[ 60.755121] do_syscall_64+0x59/0x90
[ 60.755123] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 60.755126] Freed by task 2139:
[ 60.755128] kasan_save_stack+0x26/0x50
[ 60.755130] kasan_set_track+0x25/0x40
[ 60.755132] kasan_save_free_info+0x2e/0x50
[ 60.755134] ____kasan_slab_free+0x174/0x1e0
[ 60.755136] __kasan_slab_free+0x12/0x20
[ 60.755138] slab_free_freelist_hook+0xd0/0x1a0
[ 60.755140] __kmem_cache_free+0x193/0x2c0
[ 60.755143] kfree+0x79/0x120
[ 60.755145] dvb_free_device+0x38/0x60 [dvb_core]
[ 60.755151] dvb_frontend_put.cold+0xa6/0x15a [dvb_core]
[ 60.755160] dvb_frontend_release.cold+0xc7/0xf6 [dvb_core]
[ 60.755167] __fput+0x2ce/0xaf0
[ 60.755169] ____fput+0xe/0x20
[ 60.755171] task_work_run+0x153/0x240
[ 60.755173] exit_to_user_mode_prepare+0x18f/0x1a0
[ 60.755175] syscall_exit_to_user_mode+0x26/0x50
[ 60.755177] do_syscall_64+0x69/0x90
[ 60.755179] entry_SYSCALL_64_after_hwframe+0x63/0xcd
```
Also, UAF can occur for driver-specfic structures (such as 'struct XXX_dev'):
```
cpu0 cpu1
1. open()
dvb_frontend_open()
2. as102_usb_disconnect()
kref_put(&as102_dev->kref, as102_usb_release); // kref : 0
as102_usb_release()
kfree(as102_dev);
3. close()
dvb_frontend_release()
mutex_lock(&fe->dvb->mdev_lock); // UAF
```
The KASAN log caused by this is as follows:
```
[ 82.144178] ==================================================================
[ 82.144182] BUG: KASAN: use-after-free in mutex_lock+0x81/0xe0
[ 82.144189] Write of size 8 at addr ffff888121b6a168 by task as102_test/2356
[ 82.144193] CPU: 12 PID: 2356 Comm: as102_test Not tainted 6.1.0-rc2+ #16
[ 82.144196] Hardware name: Gigabyte Technology Co., Ltd. B460MDS3H/B460M DS3H, BIOS F3 05/27/2020
[ 82.144198] Call Trace:
[ 82.144200] <TASK>
[ 82.144201] dump_stack_lvl+0x49/0x63
[ 82.144205] print_report+0x177/0x46e
[ 82.144208] ? kasan_complete_mode_report_info+0x7c/0x210
[ 82.144212] ? mutex_lock+0x81/0xe0
[ 82.144215] kasan_report+0xb0/0x140
[ 82.144218] ? mutex_lock+0x81/0xe0
[ 82.144222] kasan_check_range+0x3a/0x1d0
[ 82.144224] __kasan_check_write+0x14/0x20
[ 82.144226] mutex_lock+0x81/0xe0
[ 82.144229] ? __mutex_lock_slowpath+0x20/0x20
[ 82.144234] dvb_frontend_release.cold+0x178/0x4d2 [dvb_core]
[ 82.144246] __fput+0x2ce/0xaf0
[ 82.144250] ____fput+0xe/0x20
[ 82.144253] task_work_run+0x153/0x240
[ 82.144257] ? task_work_cancel+0x20/0x20
[ 82.144260] ? fput+0xab/0x140
[ 82.144263] exit_to_user_mode_prepare+0x18f/0x1a0
[ 82.144266] syscall_exit_to_user_mode+0x26/0x50
[ 82.144270] do_syscall_64+0x69/0x90
[ 82.144273] ? debug_smp_processor_id+0x17/0x20
[ 82.144275] ? fpregs_assert_state_consistent+0x52/0xc0
[ 82.144279] ? exit_to_user_mode_prepare+0x49/0x1a0
[ 82.144281] ? irqentry_exit_to_user_mode+0x9/0x20
[ 82.144284] ? irqentry_exit+0x3b/0x50
[ 82.144287] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 82.144290] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 82.144293] RIP: 0033:0x4537eb
[ 82.144296] Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a8 02 00 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 11 a9 02 00 8b 44
[ 82.144298] RSP: 002b:00007fc7600001a0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
[ 82.144302] RAX: 0000000000000000 RBX: 00007fc760000640 RCX: 00000000004537eb
[ 82.144304] RDX: 0000000000000000 RSI: 00007fc758000b70 RDI: 0000000000000003
[ 82.144306] RBP: 00007fc7600001d0 R08: 0000000000000000 R09: 0000000000000000
[ 82.144308] R10: 000000000000000a R11: 0000000000000293 R12: 00007fc760000640
[ 82.144310] R13: 0000000000000000 R14: 000000000041b290 R15: 00007fc75f800000
[ 82.144313] </TASK>
[ 82.144315] Allocated by task 2225:
[ 82.144317] kasan_save_stack+0x26/0x50
[ 82.144320] kasan_set_track+0x25/0x40
[ 82.144322] kasan_save_alloc_info+0x1e/0x30
[ 82.144325] __kasan_kmalloc+0xb4/0xc0
[ 82.144327] kmalloc_trace+0x4a/0xb0
[ 82.144329] as102_usb_probe.cold+0x58/0x6eb [dvb_as102]
[ 82.144335] usb_probe_interface+0x266/0x740
[ 82.144338] really_probe+0x1fa/0xa80
[ 82.144341] __driver_probe_device+0x2cb/0x490
[ 82.144343] driver_probe_device+0x4e/0x140
[ 82.144345] __driver_attach+0x1a3/0x520
[ 82.144347] bus_for_each_dev+0x11e/0x1c0
[ 82.144348] driver_attach+0x3d/0x60
[ 82.144350] bus_add_driver+0x449/0x5a0
[ 82.144352] driver_register+0x219/0x390
[ 82.144354] usb_register_driver+0x228/0x400
[ 82.144356] 0xffffffffc0655023
[ 82.144358] do_one_initcall+0x97/0x310
[ 82.144361] do_init_module+0x19a/0x630
[ 82.144363] load_module+0x6ca4/0x7d90
[ 82.144365] __do_sys_finit_module+0x134/0x1d0
[ 82.144367] __x64_sys_finit_module+0x72/0xb0
[ 82.144369] do_syscall_64+0x59/0x90
[ 82.144371] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 82.144374] Freed by task 158:
[ 82.144376] kasan_save_stack+0x26/0x50
[ 82.144378] kasan_set_track+0x25/0x40
[ 82.144380] kasan_save_free_info+0x2e/0x50
[ 82.144382] ____kasan_slab_free+0x174/0x1e0
[ 82.144384] __kasan_slab_free+0x12/0x20
[ 82.144386] slab_free_freelist_hook+0xd0/0x1a0
[ 82.144388] __kmem_cache_free+0x193/0x2c0
[ 82.144391] kfree+0x79/0x120
[ 82.144393] as102_usb_release+0x5d/0x75 [dvb_as102]
[ 82.144397] as102_usb_disconnect+0x125/0x176 [dvb_as102]
[ 82.144400] usb_unbind_interface+0x187/0x7c0
[ 82.144402] device_remove+0x117/0x170
[ 82.144404] device_release_driver_internal+0x418/0x660
[ 82.144407] device_release_driver+0x12/0x20
[ 82.144409] bus_remove_device+0x28f/0x540
[ 82.144410] device_del+0x501/0xc30
[ 82.144413] usb_disable_device+0x2a5/0x660
[ 82.144415] usb_disconnect.cold+0x1f9/0x620
[ 82.144417] hub_event+0x16d3/0x3d20
[ 82.144420] process_one_work+0x778/0x11c0
[ 82.144422] worker_thread+0x544/0x1180
[ 82.144424] kthread+0x280/0x320
[ 82.144426] ret_from_fork+0x1f/0x30
```
# 2. media: dvb-core: Fix use-after-free due to race condition occurring in dvb_net
This is a security patch for a race condition that occurs in the dvb_net system of dvb-core.
The race condition that occurs here will occur with _any_ device driver using dvb_net.
The race condition that occurs in dvb_net is:
```
cpu0 cpu1
1. .disconnect()
dvb_net_release()
dvbnet->exit = 1;
if (dvbnet->dvbdev->users < 1) // improper reference counting
2. open()
dvb_device_open()
down_read(&minor_rwsem);
dvb_generic_open()
dvbdev->users--; // race condition
up_read(&minor_rwsem);
3. dvb_unregister_device()
dvb_remove_device()
down_write(&minor_rwsem);
dvb_minors[dvbdev->minor] = NULL;
up_write(&minor_rwsem);
dvb_free_device()
kfree (dvbdev->fops);
4. close(fd)
__x64_sys_close()
close_fd()
filp_close()
retval = filp->f_op->flush(filp, id); // UAF
```
After the 'if (dvbnet->dvbdev->users < 1)' conditional of dvb_net_release() passes,
'dvbdev->users--;' of dvb_generic_open() is executed, improper reference counting occurs.
The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement that checks 'dvbnet->exit'.
The KASAN log caused by this is as follows:
```
[ 952.372616] ==================================================================
[ 952.372639] BUG: KASAN: use-after-free in filp_close+0x119/0x140
[ 952.372667] Read of size 8 at addr ffff888118abec78 by task dvb_net_test/2522
[ 952.372690] CPU: 3 PID: 2522 Comm: dvb_net_test Not tainted 6.1.0-rc2+ #16
[ 952.372707] Hardware name: Gigabyte Technology Co., Ltd. B460MDS3H/B460M DS3H, BIOS F3 05/27/2020
[ 952.372718] Call Trace:
[ 952.372727] <TASK>
[ 952.372736] dump_stack_lvl+0x49/0x63
[ 952.372754] print_report+0x177/0x46e
[ 952.372775] ? kasan_complete_mode_report_info+0x7c/0x210
[ 952.372791] ? filp_close+0x119/0x140
[ 952.372810] kasan_report+0xb0/0x140
[ 952.372830] ? filp_close+0x119/0x140
[ 952.372850] __asan_report_load8_noabort+0x14/0x20
[ 952.372865] filp_close+0x119/0x140
[ 952.372883] close_fd+0x75/0x90
[ 952.372897] __x64_sys_close+0x30/0x80
[ 952.372915] do_syscall_64+0x59/0x90
[ 952.372930] ? fpregs_assert_state_consistent+0x52/0xc0
[ 952.372950] ? exit_to_user_mode_prepare+0x49/0x1a0
[ 952.372965] ? syscall_exit_to_user_mode+0x26/0x50
[ 952.372984] ? do_syscall_64+0x69/0x90
[ 952.373000] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 952.373016] RIP: 0033:0x4537eb
[ 952.373031] Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a8 02 00 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 11 a9 02 00 8b 44
[ 952.373046] RSP: 002b:00007f98078001a0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
[ 952.373066] RAX: ffffffffffffffda RBX: 00007f9807800640 RCX: 00000000004537eb
[ 952.373078] RDX: 0000000000000000 RSI: 00007f9800000b70 RDI: 0000000000000003
[ 952.373089] RBP: 00007f98078001d0 R08: 0000000000000000 R09: 0000000000000000
[ 952.373100] R10: 00007f9807800180 R11: 0000000000000293 R12: 00007f9807800640
[ 952.373111] R13: 0000000000000000 R14: 000000000041b290 R15: 00007f9807000000
[ 952.373130] </TASK>
[ 952.373145] Allocated by task 592:
[ 952.373155] kasan_save_stack+0x26/0x50
[ 952.373171] kasan_set_track+0x25/0x40
[ 952.373185] kasan_save_alloc_info+0x1e/0x30
[ 952.373195] __kasan_kmalloc+0xb4/0xc0
[ 952.373212] __kmalloc_node_track_caller+0x66/0x160
[ 952.373233] kmemdup+0x23/0x50
[ 952.373250] dvb_register_device+0x1cd/0x15c0 [dvb_core]
[ 952.373301] dvb_net_init+0xc7/0x100 [dvb_core]
[ 952.373348] ttusb_dec_probe.cold+0x14de/0x1f1e [ttusb_dec]
[ 952.373373] usb_probe_interface+0x266/0x740
[ 952.373388] really_probe+0x1fa/0xa80
[ 952.373400] __driver_probe_device+0x2cb/0x490
[ 952.373412] driver_probe_device+0x4e/0x140
[ 952.373424] __device_attach_driver+0x197/0x2b0
[ 952.373437] bus_for_each_drv+0x129/0x1c0
[ 952.373447] __device_attach+0x2ad/0x4f0
[ 952.373459] device_initial_probe+0x13/0x20
[ 952.373470] bus_probe_device+0x198/0x240
[ 952.373481] device_add+0xa1b/0x1cc0
[ 952.373491] usb_set_configuration+0x9ca/0x17f0
[ 952.373502] usb_generic_driver_probe+0x86/0xb0
[ 952.373513] usb_probe_device+0xa7/0x260
[ 952.373524] really_probe+0x1fa/0xa80
[ 952.373535] __driver_probe_device+0x2cb/0x490
[ 952.373547] driver_probe_device+0x4e/0x140
[ 952.373558] __device_attach_driver+0x197/0x2b0
[ 952.373570] bus_for_each_drv+0x129/0x1c0
[ 952.373580] __device_attach+0x2ad/0x4f0
[ 952.373591] device_initial_probe+0x13/0x20
[ 952.373603] bus_probe_device+0x198/0x240
[ 952.373614] device_add+0xa1b/0x1cc0
[ 952.373623] usb_new_device.cold+0x462/0xc46
[ 952.373637] hub_event+0x1d23/0x3d20
[ 952.373652] process_one_work+0x778/0x11c0
[ 952.373664] worker_thread+0x544/0x1180
[ 952.373676] kthread+0x280/0x320
[ 952.373686] ret_from_fork+0x1f/0x30
[ 952.373707] Freed by task 592:
[ 952.373717] kasan_save_stack+0x26/0x50
[ 952.373731] kasan_set_track+0x25/0x40
[ 952.373744] kasan_save_free_info+0x2e/0x50
[ 952.373754] ____kasan_slab_free+0x174/0x1e0
[ 952.373767] __kasan_slab_free+0x12/0x20
[ 952.373780] slab_free_freelist_hook+0xd0/0x1a0
[ 952.373793] __kmem_cache_free+0x193/0x2c0
[ 952.373805] kfree+0x79/0x120
[ 952.373817] dvb_free_device.part.0+0x33/0x70 [dvb_core]
[ 952.373858] dvb_unregister_device+0x40/0x54 [dvb_core]
[ 952.373905] dvb_net_release+0x264/0x316 [dvb_core]
[ 952.373952] ttusb_dec_disconnect+0x391/0x4e1 [ttusb_dec]
[ 952.373973] usb_unbind_interface+0x187/0x7c0
[ 952.373986] device_remove+0x117/0x170
[ 952.373997] device_release_driver_internal+0x418/0x660
[ 952.374010] device_release_driver+0x12/0x20
[ 952.374022] bus_remove_device+0x28f/0x540
[ 952.374032] device_del+0x501/0xc30
[ 952.374047] usb_disable_device+0x2a5/0x660
[ 952.374058] usb_disconnect.cold+0x1f9/0x620
[ 952.374070] hub_event+0x16d3/0x3d20
[ 952.374084] process_one_work+0x778/0x11c0
[ 952.374096] worker_thread+0x544/0x1180
[ 952.374107] kthread+0x280/0x320
[ 952.374117] ret_from_fork+0x1f/0x30
```
# 3. media: dvb-core: Fix use-after-free due to race condition occurring in dvb_register_device()
This is a security patch for a race condition that occurs in the dvb_register_device() function.
This race condition can occur _anywhere_ the dvb_register_device() function is called:
dvb_demux, dvb_dvr, dvb_frontend, dvb_net, etc.
The race condition flow is as follows (dvb_net is used as an example):
``````
cpu0 cpu1
1. open()
dvb_device_open()
2. close()
__fput()
dvb_net_close()
3. .disconnect()
dvb_net_release()
dvb_unregister_device()
dvb_free_device()
kfree (dvbdev->fops);
4. ...
fops_put(file->f_op); // UAF!!
```
UAF occurs in '.probe -> open() -> close() -> .disconnect' flow.
The root cause of this is that fops used as an argument of replace_fops() in dvb_device_open()
are kfree()d in the .disconnect flow.
It's not common for fops used in replace_fops() to be dynamically allocated and kfree()d like this.
The KASAN log caused by this is as follows:
```
[ 67.857811] ==================================================================
[ 67.857830] BUG: KASAN: use-after-free in __fput+0xa55/0xaf0
[ 67.857855] Read of size 8 at addr ffff88810f7dfc00 by task dvb_net_fput/2152
[ 67.857879] CPU: 15 PID: 2152 Comm: dvb_net_fput Not tainted 6.1.0-rc2+ #17
[ 67.857896] Hardware name: Gigabyte Technology Co., Ltd. B460MDS3H/B460M DS3H, BIOS F3 05/27/2020
[ 67.857907] Call Trace:
[ 67.857917] <TASK>
[ 67.857928] dump_stack_lvl+0x49/0x63
[ 67.857947] print_report+0x177/0x46e
[ 67.857967] ? kasan_complete_mode_report_info+0x7c/0x210
[ 67.857984] ? __fput+0xa55/0xaf0
[ 67.858001] kasan_report+0xb0/0x140
[ 67.858021] ? __fput+0xa55/0xaf0
[ 67.858039] __asan_report_load8_noabort+0x14/0x20
[ 67.858053] __fput+0xa55/0xaf0
[ 67.858072] ____fput+0xe/0x20
[ 67.858087] task_work_run+0x153/0x240
[ 67.858108] ? task_work_cancel+0x20/0x20
[ 67.858127] ? fput+0xab/0x140
[ 67.858144] exit_to_user_mode_prepare+0x18f/0x1a0
[ 67.858160] syscall_exit_to_user_mode+0x26/0x50
[ 67.858179] do_syscall_64+0x69/0x90
[ 67.858194] ? exit_to_user_mode_prepare+0x49/0x1a0
[ 67.858208] ? irqentry_exit_to_user_mode+0x9/0x20
[ 67.858226] ? irqentry_exit+0x3b/0x50
[ 67.858243] ? exc_page_fault+0x72/0xf0
[ 67.858262] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 67.858278] RIP: 0033:0x4537eb
[ 67.858294] Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a8 02 00 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 11 a9 02 00 8b 44
[ 67.858309] RSP: 002b:00007f607be001a0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
[ 67.858330] RAX: 0000000000000000 RBX: 00007f607be00640 RCX: 00000000004537eb
[ 67.858343] RDX: 0000000000000000 RSI: 00007f6074000b70 RDI: 0000000000000003
[ 67.858353] RBP: 00007f607be001d0 R08: 0000000000000000 R09: 0000000000000000
[ 67.858364] R10: 00007f607be00180 R11: 0000000000000293 R12: 00007f607be00640
[ 67.858375] R13: 0000000000000000 R14: 000000000041b2a0 R15: 00007f607b600000
[ 67.858392] </TASK>
[ 67.858407] Allocated by task 2125:
[ 67.858417] kasan_save_stack+0x26/0x50
[ 67.858433] kasan_set_track+0x25/0x40
[ 67.858447] kasan_save_alloc_info+0x1e/0x30
[ 67.858456] __kasan_kmalloc+0xb4/0xc0
[ 67.858469] __kmalloc_node_track_caller+0x66/0x160
[ 67.858483] kmemdup+0x23/0x50
[ 67.858495] dvb_register_device+0x1cd/0x15c0 [dvb_core]
[ 67.858543] dvb_net_init+0xe1/0x120 [dvb_core]
[ 67.858591] ttusb_dec_probe.cold+0x14de/0x1f1e [ttusb_dec]
[ 67.858615] usb_probe_interface+0x266/0x740
[ 67.858629] really_probe+0x1fa/0xa80
[ 67.858642] __driver_probe_device+0x2cb/0x490
[ 67.858654] driver_probe_device+0x4e/0x140
[ 67.858666] __driver_attach+0x1a3/0x520
[ 67.858677] bus_for_each_dev+0x11e/0x1c0
[ 67.858688] driver_attach+0x3d/0x60
[ 67.858699] bus_add_driver+0x449/0x5a0
[ 67.858710] driver_register+0x219/0x390
[ 67.858722] usb_register_driver+0x228/0x400
[ 67.858733] 0xffffffffc0506023
[ 67.858744] do_one_initcall+0x97/0x310
[ 67.858758] do_init_module+0x19a/0x630
[ 67.858770] load_module+0x6ca4/0x7d90
[ 67.858781] __do_sys_finit_module+0x134/0x1d0
[ 67.858792] __x64_sys_finit_module+0x72/0xb0
[ 67.858803] do_syscall_64+0x59/0x90
[ 67.858815] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 67.858834] Freed by task 666:
[ 67.858843] kasan_save_stack+0x26/0x50
[ 67.858857] kasan_set_track+0x25/0x40
[ 67.858870] kasan_save_free_info+0x2e/0x50
[ 67.858880] ____kasan_slab_free+0x174/0x1e0
[ 67.858893] __kasan_slab_free+0x12/0x20
[ 67.858907] slab_free_freelist_hook+0xd0/0x1a0
[ 67.858919] __kmem_cache_free+0x193/0x2c0
[ 67.858932] kfree+0x79/0x120
[ 67.858944] dvb_free_device.part.0+0x33/0x70 [dvb_core]
[ 67.858984] dvb_unregister_device+0x40/0x54 [dvb_core]
[ 67.859032] dvb_net_release+0x267/0x319 [dvb_core]
[ 67.859080] ttusb_dec_disconnect+0x391/0x4e1 [ttusb_dec]
[ 67.859102] usb_unbind_interface+0x187/0x7c0
[ 67.859115] device_remove+0x117/0x170
[ 67.859126] device_release_driver_internal+0x418/0x660
[ 67.859139] device_release_driver+0x12/0x20
[ 67.859150] bus_remove_device+0x28f/0x540
[ 67.859161] device_del+0x501/0xc30
[ 67.859176] usb_disable_device+0x2a5/0x660
[ 67.859187] usb_disconnect.cold+0x1f9/0x620
[ 67.859200] hub_event+0x16d3/0x3d20
[ 67.859215] process_one_work+0x778/0x11c0
[ 67.859228] worker_thread+0x544/0x1180
[ 67.859239] kthread+0x280/0x320
[ 67.859249] ret_from_fork+0x1f/0x30
```
# 4. media: ttusb-dec: Fix memory leak in ttusb_dec_exit_dvb()
This is a patch for a memory leak that occurs in the ttusb_dec_exit_dvb() function.
Because ttusb_dec_exit_dvb() does not call dvb_frontend_detach(),
several fe related structures are not kfree()d.
Users can trigger a memory leak just by repeating connecting and disconnecting
the ttusb_dec device.
Finally, most of these patches are similar to this one, the security patch for
CVE-2022-41218 that I reported:
https://lore.kernel.org/linux-media/20221031100245.23702-1-tiwai@suse.de/
Regards,
Hyunwoo Kim
Hyunwoo Kim (4):
media: dvb-core: Fix use-after-free due to race condition occurring in
dvb_frontend
media: dvb-core: Fix use-after-free due to race condition occurring in
dvb_net
media: dvb-core: Fix use-after-free due to race condition occurring in
dvb_register_device()
media: ttusb-dec: Fix memory leak in ttusb_dec_exit_dvb()
drivers/media/dvb-core/dvb_frontend.c | 39 ++++++++++--
drivers/media/dvb-core/dvb_net.c | 37 ++++++++++-
drivers/media/dvb-core/dvbdev.c | 83 ++++++++++++++++++-------
drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +-
include/media/dvb_frontend.h | 6 +-
include/media/dvb_net.h | 4 ++
include/media/dvbdev.h | 15 +++++
7 files changed, 155 insertions(+), 32 deletions(-)
--
2.25.1
next reply other threads:[~2022-11-15 13:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 13:18 imv4bel [this message]
2022-11-15 13:18 ` [PATCH 1/4] media: dvb-core: Fix use-after-free due to race condition occurring in dvb_frontend imv4bel
2022-11-15 13:18 ` [PATCH 2/4] media: dvb-core: Fix use-after-free due to race condition occurring in dvb_net imv4bel
2022-11-15 13:18 ` [PATCH 3/4] media: dvb-core: Fix use-after-free due to race condition occurring in dvb_register_device() imv4bel
2022-11-17 4:16 ` Dan Carpenter
2022-11-15 13:18 ` [PATCH 4/4] media: ttusb-dec: Fix memory leak in ttusb_dec_exit_dvb() imv4bel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221115131822.6640-1-imv4bel@gmail.com \
--to=imv4bel@gmail.com \
--cc=cai.huoqing@linux.dev \
--cc=kernel@tuxforce.de \
--cc=linux-media@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).