linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jai Luthra <j-luthra@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Vaishnav Achath <vaishnav.a@ti.com>,
	Maxime Ripard <mripard@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Aradhya Bhatia <a-bhatia1@ti.com>,
	Devarsh Thakkar <devarsht@ti.com>,
	Changhuang Liang <changhuang.liang@starfivetech.com>,
	Jack Zhu <jack.zhu@starfivetech.com>,
	Julien Massot <julien.massot@collabora.com>,
	Jayshri Pawar <jpawar@cadence.com>, Jai Luthra <j-luthra@ti.com>
Subject: [PATCH RFC 19/21] SQUASH: media: ti: j721e-csi2rx: Enable per-stream controls
Date: Thu, 22 Feb 2024 17:01:35 +0530	[thread overview]
Message-ID: <20240222-multistream-v1-19-1837ed916eeb@ti.com> (raw)
In-Reply-To: <20240222-multistream-v1-0-1837ed916eeb@ti.com>

Use the new enable_streams() APIs to start/stop individual streams on
the connected subdev when capture is initiated on the corresponding v4l2
device.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
 .../media/platform/ti/j721e-csi2rx/j721e-csi2rx.c  | 78 ++++++++++++++--------
 1 file changed, 52 insertions(+), 26 deletions(-)

diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index b33681e1e2db..c2d47507b3a7 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -983,7 +983,9 @@ static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int count)
 	dma->state = TI_CSI2RX_DMA_ACTIVE;
 	spin_unlock_irqrestore(&dma->lock, flags);
 
-	ret = v4l2_subdev_call(&csi->subdev, video, s_stream, 1);
+	ret = v4l2_subdev_enable_streams(&csi->subdev,
+					 TI_CSI2RX_PAD_FIRST_SOURCE + ctx->idx,
+					 BIT(0));
 	if (ret)
 		goto err_dma;
 
@@ -1011,7 +1013,10 @@ static void ti_csi2rx_stop_streaming(struct vb2_queue *vq)
 	writel(0, csi->shim + SHIM_CNTL);
 	writel(0, csi->shim + SHIM_DMACNTX(ctx->idx));
 
-	ret = v4l2_subdev_call(&csi->subdev, video, s_stream, 0);
+	ret = v4l2_subdev_disable_streams(&csi->subdev,
+					  TI_CSI2RX_PAD_FIRST_SOURCE + ctx->idx,
+					  BIT(0));
+
 	if (ret)
 		dev_err(csi->dev, "Failed to stop subdev stream\n");
 
@@ -1126,36 +1131,60 @@ static int ti_csi2rx_sd_init_state(struct v4l2_subdev *sd,
 	return _ti_csi2rx_sd_set_routing(sd, state, &routing);
 }
 
-static int ti_csi2rx_sd_s_stream(struct v4l2_subdev *sd, int enable)
+static int ti_csi2rx_sd_enable_streams(struct v4l2_subdev *sd,
+				       struct v4l2_subdev_state *state,
+				       u32 pad, u64 streams_mask)
 {
 	struct ti_csi2rx_dev *csi = to_csi2rx_dev(sd);
+	struct media_pad *remote_pad;
+	u64 sink_streams;
 	int ret = 0;
 
-	mutex_lock(&csi->mutex);
+	remote_pad = media_entity_remote_source_pad_unique(&csi->subdev.entity);
+	if (!remote_pad)
+		return -ENODEV;
+	sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
+						       TI_CSI2RX_PAD_SINK,
+						       &streams_mask);
 
-	if (enable) {
-		if (csi->enable_count > 0) {
-			csi->enable_count++;
-			goto out;
-		}
+	ret = v4l2_subdev_enable_streams(csi->source, remote_pad->index,
+					 sink_streams);
+	if (ret)
+		return ret;
 
-		ret = v4l2_subdev_call(csi->source, video, s_stream, 1);
-		if (ret)
-			goto out;
+	mutex_lock(&csi->mutex);
+	csi->enable_count++;
+	mutex_unlock(&csi->mutex);
 
-		csi->enable_count++;
-	} else {
-		if (csi->enable_count == 0) {
-			ret = -EINVAL;
-			goto out;
-		}
+	return 0;
+}
+
+static int ti_csi2rx_sd_disable_streams(struct v4l2_subdev *sd,
+					struct v4l2_subdev_state *state,
+					u32 pad, u64 streams_mask)
+{
+	struct ti_csi2rx_dev *csi = to_csi2rx_dev(sd);
+	struct media_pad *remote_pad;
+	u64 sink_streams;
+	int ret = 0;
 
-		if (--csi->enable_count > 0)
-			goto out;
+	remote_pad = media_entity_remote_source_pad_unique(&csi->subdev.entity);
+	if (!remote_pad)
+		return -ENODEV;
+	sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
+						       TI_CSI2RX_PAD_SINK,
+						       &streams_mask);
 
-		ret = v4l2_subdev_call(csi->source, video, s_stream, 0);
+	mutex_lock(&csi->mutex);
+	if (csi->enable_count == 0) {
+		ret = -EINVAL;
+		goto out;
 	}
 
+	ret = v4l2_subdev_disable_streams(csi->source, remote_pad->index,
+					  sink_streams);
+	if (!ret)
+		--csi->enable_count;
 out:
 	mutex_unlock(&csi->mutex);
 	return ret;
@@ -1165,14 +1194,11 @@ static const struct v4l2_subdev_pad_ops ti_csi2rx_subdev_pad_ops = {
 	.set_routing = ti_csi2rx_sd_set_routing,
 	.get_fmt = v4l2_subdev_get_fmt,
 	.set_fmt = ti_csi2rx_sd_set_fmt,
-};
-
-static const struct v4l2_subdev_video_ops ti_csi2rx_subdev_video_ops = {
-	.s_stream = ti_csi2rx_sd_s_stream,
+	.enable_streams = ti_csi2rx_sd_enable_streams,
+	.disable_streams = ti_csi2rx_sd_disable_streams,
 };
 
 static const struct v4l2_subdev_ops ti_csi2rx_subdev_ops = {
-	.video = &ti_csi2rx_subdev_video_ops,
 	.pad = &ti_csi2rx_subdev_pad_ops,
 };
 

-- 
2.43.0


  parent reply	other threads:[~2024-02-22 11:33 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-22 11:31 [PATCH RFC 00/21] media: cadence,ti: CSI2RX Multistream Support Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 01/21] media: ti: j721e-csi2rx: Fix races while restarting DMA Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 02/21] media: cadence: csi2rx: configure DPHY before starting source stream Jai Luthra
2024-02-22 14:29   ` Julien Massot
2024-02-23  7:23     ` Jai Luthra
2024-02-23  2:46   ` 回复: " Changhuang Liang
2024-02-22 11:31 ` [PATCH RFC 03/21] media: cadence: csi2rx: Support runtime PM Jai Luthra
2024-03-22  9:26   ` 回复: " Changhuang Liang
2024-03-22 11:13     ` Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 04/21] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans Jai Luthra
2024-02-22 12:25   ` Rob Herring
2024-02-23  7:44     ` Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 05/21] media: ti: j721e-csi2rx: separate out device and context Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 06/21] media: ti: j721e-csi2rx: prepare SHIM code for multiple contexts Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 07/21] media: ti: j721e-csi2rx: allocate DMA channel based on context index Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 08/21] media: ti: j721e-csi2rx: add a subdev for the core device Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 09/21] SQUASH: media: ti: j721e-csi2rx: Fix link validation for multi-stream Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 10/21] media: ti: j721e-csi2rx: get number of contexts from device tree Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 11/21] media: cadence: csi2rx: add get_frame_desc wrapper Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 12/21] media: ti: j721e-csi2rx: add support for processing virtual channels Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 13/21] media: cadence: csi2rx: Use new enable stream APIs Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 14/21] media: cadence: csi2rx: Enable stream-wise routing Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 15/21] SQUASH: media: cadence: csi2rx: Enable per-stream controls Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 16/21] SQUASH: media: cadence: csi2rx: Filter using MIPI virtual channels Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 17/21] SQUASH: media: cadence: csi2rx: Filter streams in get_frame_desc Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 18/21] media: ti: j721e-csi2rx: add multistream support Jai Luthra
2024-02-22 11:31 ` Jai Luthra [this message]
2024-02-22 11:31 ` [PATCH RFC 20/21] SQUASH: media: ti: j721e-csi2rx: Assert pixel reset before stopping last stream Jai Luthra
2024-02-22 11:31 ` [PATCH RFC 21/21] media: ti: j721e-csi2rx: Submit all available buffers Jai Luthra
2024-02-23  2:53 ` 回复: [PATCH RFC 00/21] media: cadence,ti: CSI2RX Multistream Support Changhuang Liang
2024-02-23  7:49   ` Jai Luthra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240222-multistream-v1-19-1837ed916eeb@ti.com \
    --to=j-luthra@ti.com \
    --cc=a-bhatia1@ti.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jack.zhu@starfivetech.com \
    --cc=jpawar@cadence.com \
    --cc=julien.massot@collabora.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=vaishnav.a@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).