[PATCH v2 0/5] cec: convert remaining drivers to the new notifier API

[PATCH v2 0/5] cec: convert remaining drivers to the new notifier API

[Dariusz Marcinkiewicz]

This series updates remaining drivers in DRM to use new CEC notifier API.

Those complement the "cec: improve notifier support, add
connector info" patch series and also replace 2 following patches from
there:
- [PATCHv8 09/13] dw-hdmi: use cec_notifier_conn_(un)register
- [PATCHv9 12/13] tda998x: use cec_notifier_conn_(un)register

None of those changes were not tested on a real hardware.

Changes since v1:
	Those patches delay creation of notifiers until respective
	connectors are constructed. It seems that those patches, for a
	couple of drivers, by adding the delay, introduce a race between
	notifiers' creation and the IRQs handling threads - at least I
	don't see anything obvious in there that would explicitly forbid
	such races to occur. v2 adds a write barrier to make sure IRQ
	threads see the notifier once it is created (replacing the
	WRITE_ONCE I put in v1). The best thing to do here, I believe,
	would be not to have any synchronization and make sure that an IRQ
	only gets enabled after the notifier is created.


Dariusz Marcinkiewicz (5):
  drm: tda998x: use cec_notifier_conn_(un)register
  drm: sti: use cec_notifier_conn_(un)register
  drm: tegra: use cec_notifier_conn_(un)register
  drm: dw-hdmi: use cec_notifier_conn_(un)register
  drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 37 +++++++++++++++--------
 drivers/gpu/drm/exynos/exynos_hdmi.c      | 33 ++++++++++++--------
 drivers/gpu/drm/i2c/tda998x_drv.c         | 32 ++++++++++++++------
 drivers/gpu/drm/sti/sti_hdmi.c            | 20 +++++++-----
 drivers/gpu/drm/tegra/output.c            | 18 ++++++-----
 5 files changed, 91 insertions(+), 49 deletions(-)

-- 
2.22.0.410.gd8fdbe21b5-goog

[PATCH v2 1/5] drm: tda998x: use cec_notifier_conn_(un)register

[Dariusz Marcinkiewicz]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill
in the cec_connector_info.

Changes since v1:
	Add memory barrier to make sure that the notifier
	becomes visible to the irq thread once it is
	fully constructed.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
---
 drivers/gpu/drm/i2c/tda998x_drv.c | 32 ++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 7f34601bb5155..7844f4113a839 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -794,9 +794,14 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
 			if (lvl & CEC_RXSHPDLEV_HPD) {
 				tda998x_edid_delay_start(priv);
 			} else {
+				struct cec_notifier *notify;
+
 				schedule_work(&priv->detect_work);
-				cec_notifier_set_phys_addr(priv->cec_notify,
-						   CEC_PHYS_ADDR_INVALID);
+
+				notify = READ_ONCE(priv->cec_notify);
+				if (notify)
+					cec_notifier_set_phys_addr(notify,
+							CEC_PHYS_ADDR_INVALID);
 			}
 
 			handled = true;
@@ -1253,6 +1258,8 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
 				  struct drm_device *drm)
 {
 	struct drm_connector *connector = &priv->connector;
+	struct cec_connector_info conn_info;
+	struct cec_notifier *notifier;
 	int ret;
 
 	connector->interlace_allowed = 1;
@@ -1269,6 +1276,19 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
 	if (ret)
 		return ret;
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	notifier = cec_notifier_conn_register(priv->cec_glue.parent,
+					      NULL, &conn_info);
+	if (!notifier)
+		return -ENOMEM;
+	/*
+	 * Make sure that tda998x_irq_thread does see the notifier
+	 * when it fully constructed.
+	 */
+	smp_wmb();
+	priv->cec_notify = notifier;
+
 	drm_connector_attach_encoder(&priv->connector,
 				     priv->bridge.encoder);
 
@@ -1651,7 +1671,7 @@ static void tda998x_destroy(struct device *dev)
 	i2c_unregister_device(priv->cec);
 
 	if (priv->cec_notify)
-		cec_notifier_put(priv->cec_notify);
+		cec_notifier_conn_unregister(priv->cec_notify);
 }
 
 static int tda998x_create(struct device *dev)
@@ -1776,12 +1796,6 @@ static int tda998x_create(struct device *dev)
 		cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
 	}
 
-	priv->cec_notify = cec_notifier_get(dev);
-	if (!priv->cec_notify) {
-		ret = -ENOMEM;
-		goto fail;
-	}
-
 	priv->cec_glue.parent = dev;
 	priv->cec_glue.data = priv;
 	priv->cec_glue.init = tda998x_cec_hook_init;
-- 
2.22.0.410.gd8fdbe21b5-goog

[PATCH v2 2/5] drm: sti: use cec_notifier_conn_(un)register

[Dariusz Marcinkiewicz]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill
in the cec_connector_info.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
---
 drivers/gpu/drm/sti/sti_hdmi.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index 6000df6249807..5519b0c397c72 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -1250,6 +1250,7 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	struct drm_encoder *encoder;
 	struct sti_hdmi_connector *connector;
+	struct cec_connector_info conn_info;
 	struct drm_connector *drm_connector;
 	struct drm_bridge *bridge;
 	int err;
@@ -1310,6 +1311,14 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
 		goto err_sysfs;
 	}
 
+	cec_fill_conn_info_from_drm(&conn_info, drm_connector);
+	hdmi->notifier = cec_notifier_conn_register(&hdmi->dev, NULL,
+						    &conn_info);
+	if (!hdmi->notifier) {
+		hdmi->drm_connector = NULL;
+		return -ENOMEM;
+	}
+
 	/* Enable default interrupts */
 	hdmi_write(hdmi, HDMI_DEFAULT_INT, HDMI_INT_EN);
 
@@ -1323,6 +1332,10 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
 static void sti_hdmi_unbind(struct device *dev,
 		struct device *master, void *data)
 {
+	struct sti_hdmi *hdmi = dev_get_drvdata(dev);
+
+	cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID);
+	cec_notifier_conn_unregister(hdmi->notifier);
 }
 
 static const struct component_ops sti_hdmi_ops = {
@@ -1428,10 +1441,6 @@ static int sti_hdmi_probe(struct platform_device *pdev)
 		goto release_adapter;
 	}
 
-	hdmi->notifier = cec_notifier_get(&pdev->dev);
-	if (!hdmi->notifier)
-		goto release_adapter;
-
 	hdmi->reset = devm_reset_control_get(dev, "hdmi");
 	/* Take hdmi out of reset */
 	if (!IS_ERR(hdmi->reset))
@@ -1451,14 +1460,11 @@ static int sti_hdmi_remove(struct platform_device *pdev)
 {
 	struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev);
 
-	cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID);
-
 	i2c_put_adapter(hdmi->ddc_adapt);
 	if (hdmi->audio_pdev)
 		platform_device_unregister(hdmi->audio_pdev);
 	component_del(&pdev->dev, &sti_hdmi_ops);
 
-	cec_notifier_put(hdmi->notifier);
 	return 0;
 }
 
-- 
2.22.0.410.gd8fdbe21b5-goog

[PATCH v2 3/5] drm: tegra: use cec_notifier_conn_(un)register

[Dariusz Marcinkiewicz]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
---
 drivers/gpu/drm/tegra/output.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index 9c2b9dad55c30..ea92e72280868 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -80,6 +80,9 @@ tegra_output_connector_detect(struct drm_connector *connector, bool force)
 
 void tegra_output_connector_destroy(struct drm_connector *connector)
 {
+	struct tegra_output *output = connector_to_output(connector);
+
+	cec_notifier_conn_unregister(output->cec);
 	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 }
@@ -174,18 +177,11 @@ int tegra_output_probe(struct tegra_output *output)
 		disable_irq(output->hpd_irq);
 	}
 
-	output->cec = cec_notifier_get(output->dev);
-	if (!output->cec)
-		return -ENOMEM;
-
 	return 0;
 }
 
 void tegra_output_remove(struct tegra_output *output)
 {
-	if (output->cec)
-		cec_notifier_put(output->cec);
-
 	if (gpio_is_valid(output->hpd_gpio)) {
 		free_irq(output->hpd_irq, output);
 		gpio_free(output->hpd_gpio);
@@ -197,6 +193,7 @@ void tegra_output_remove(struct tegra_output *output)
 
 int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
 {
+	struct cec_connector_info conn_info;
 	int err;
 
 	if (output->panel) {
@@ -212,6 +209,13 @@ int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
 	if (gpio_is_valid(output->hpd_gpio))
 		enable_irq(output->hpd_irq);
 
+	cec_fill_conn_info_from_drm(&conn_info, &output->connector);
+
+	output->cec = cec_notifier_conn_register(output->dev, NULL, &conn_info);
+	if (!output->cec)
+		return -ENOMEM;
+
+
 	return 0;
 }
 
-- 
2.22.0.410.gd8fdbe21b5-goog

[PATCH v2 4/5] drm: dw-hdmi: use cec_notifier_conn_(un)register

[Dariusz Marcinkiewicz]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Changes since v1:
	Add memory barrier to make sure that the notifier
	becomes visible to the irq thread once it is fully
	constructed.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 37 +++++++++++++++--------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index ab7968c8f6a29..c0f4eb3c12b18 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2118,6 +2118,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
 	struct dw_hdmi *hdmi = bridge->driver_private;
 	struct drm_encoder *encoder = bridge->encoder;
 	struct drm_connector *connector = &hdmi->connector;
+	struct cec_connector_info conn_info;
+	struct cec_notifier *notifier;
 
 	connector->interlace_allowed = 1;
 	connector->polled = DRM_CONNECTOR_POLL_HPD;
@@ -2129,6 +2131,18 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
 
 	drm_connector_attach_encoder(connector, encoder);
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	notifier = cec_notifier_conn_register(hdmi->dev, NULL, &conn_info);
+	if (!notifier)
+		return -ENOMEM;
+	/*
+	 * Make sure that dw_hdmi_irq thread does see the notifier
+	 * when it fully constructed.
+	 */
+	smp_wmb();
+	hdmi->cec_notifier = notifier;
+
 	return 0;
 }
 
@@ -2295,9 +2309,15 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 				       phy_stat & HDMI_PHY_HPD,
 				       phy_stat & HDMI_PHY_RX_SENSE);
 
-		if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
-			cec_notifier_set_phys_addr(hdmi->cec_notifier,
-						   CEC_PHYS_ADDR_INVALID);
+		if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) {
+			struct cec_notifier *notifer;
+
+			notifer = READ_ONCE(hdmi->cec_notifier);
+			if (notifer)
+				cec_notifier_set_phys_addr(
+						notifer,
+						CEC_PHYS_ADDR_INVALID);
+		}
 	}
 
 	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
@@ -2600,12 +2620,6 @@ __dw_hdmi_probe(struct platform_device *pdev,
 	if (ret)
 		goto err_iahb;
 
-	hdmi->cec_notifier = cec_notifier_get(dev);
-	if (!hdmi->cec_notifier) {
-		ret = -ENOMEM;
-		goto err_iahb;
-	}
-
 	/*
 	 * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
 	 * N and cts values before enabling phy
@@ -2693,9 +2707,6 @@ __dw_hdmi_probe(struct platform_device *pdev,
 		hdmi->ddc = NULL;
 	}
 
-	if (hdmi->cec_notifier)
-		cec_notifier_put(hdmi->cec_notifier);
-
 	clk_disable_unprepare(hdmi->iahb_clk);
 	if (hdmi->cec_clk)
 		clk_disable_unprepare(hdmi->cec_clk);
@@ -2718,7 +2729,7 @@ static void __dw_hdmi_remove(struct dw_hdmi *hdmi)
 	hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
 
 	if (hdmi->cec_notifier)
-		cec_notifier_put(hdmi->cec_notifier);
+		cec_notifier_conn_unregister(hdmi->cec_notifier);
 
 	clk_disable_unprepare(hdmi->iahb_clk);
 	clk_disable_unprepare(hdmi->isfr_clk);
-- 
2.22.0.410.gd8fdbe21b5-goog

[PATCH v2 5/5] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register

[Dariusz Marcinkiewicz]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 33 +++++++++++++++++-----------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 19c252f659dd0..dec4149435de1 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -858,6 +858,11 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 
 static void hdmi_connector_destroy(struct drm_connector *connector)
 {
+	struct hdmi_context *hdata = connector_to_hdmi(connector);
+
+	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
+	cec_notifier_conn_unregister(hdata->notifier);
+
 	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 }
@@ -941,6 +946,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 {
 	struct hdmi_context *hdata = encoder_to_hdmi(encoder);
 	struct drm_connector *connector = &hdata->connector;
+	struct cec_connector_info conn_info;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -963,6 +969,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 			DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
 	}
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
+						     &conn_info);
+	if (hdata->notifier == NULL) {
+		ret = -ENOMEM;
+		DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
+	}
+
 	return ret;
 }
 
@@ -1534,8 +1549,9 @@ static void hdmi_disable(struct drm_encoder *encoder)
 		 */
 		mutex_unlock(&hdata->mutex);
 		cancel_delayed_work(&hdata->hotplug_work);
-		cec_notifier_set_phys_addr(hdata->notifier,
-					   CEC_PHYS_ADDR_INVALID);
+		if (hdata->notifier)
+			cec_notifier_set_phys_addr(hdata->notifier,
+						   CEC_PHYS_ADDR_INVALID);
 		return;
 	}
 
@@ -2012,12 +2028,6 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
-	hdata->notifier = cec_notifier_get(&pdev->dev);
-	if (hdata->notifier == NULL) {
-		ret = -ENOMEM;
-		goto err_hdmiphy;
-	}
-
 	pm_runtime_enable(dev);
 
 	audio_infoframe = &hdata->audio.infoframe;
@@ -2029,7 +2039,7 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	ret = hdmi_register_audio_device(hdata);
 	if (ret)
-		goto err_notifier_put;
+		goto err_runtime_disable;
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
@@ -2040,8 +2050,7 @@ static int hdmi_probe(struct platform_device *pdev)
 err_unregister_audio:
 	platform_device_unregister(hdata->audio.pdev);
 
-err_notifier_put:
-	cec_notifier_put(hdata->notifier);
+err_runtime_disable:
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -2060,12 +2069,10 @@ static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
-	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 	platform_device_unregister(hdata->audio.pdev);
 
-	cec_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))
-- 
2.22.0.410.gd8fdbe21b5-goog

Re: [PATCH v2 1/5] drm: tda998x: use cec_notifier_conn_(un)register

[Hans Verkuil]

On 7/1/19 4:59 PM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill
> in the cec_connector_info.
> 
> Changes since v1:
> 	Add memory barrier to make sure that the notifier
> 	becomes visible to the irq thread once it is
> 	fully constructed.
> 
> Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
> ---
>  drivers/gpu/drm/i2c/tda998x_drv.c | 32 ++++++++++++++++++++++---------
>  1 file changed, 23 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 7f34601bb5155..7844f4113a839 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -794,9 +794,14 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
>  			if (lvl & CEC_RXSHPDLEV_HPD) {
>  				tda998x_edid_delay_start(priv);
>  			} else {
> +				struct cec_notifier *notify;
> +
>  				schedule_work(&priv->detect_work);
> -				cec_notifier_set_phys_addr(priv->cec_notify,
> -						   CEC_PHYS_ADDR_INVALID);
> +
> +				notify = READ_ONCE(priv->cec_notify);
> +				if (notify)
> +					cec_notifier_set_phys_addr(notify,
> +							CEC_PHYS_ADDR_INVALID);

Can you replace this with cec_notifier_phys_addr_invalidate()?

>  			}
>  
>  			handled = true;
> @@ -1253,6 +1258,8 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
>  				  struct drm_device *drm)
>  {
>  	struct drm_connector *connector = &priv->connector;
> +	struct cec_connector_info conn_info;
> +	struct cec_notifier *notifier;
>  	int ret;
>  
>  	connector->interlace_allowed = 1;
> @@ -1269,6 +1276,19 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
>  	if (ret)
>  		return ret;
>  
> +	cec_fill_conn_info_from_drm(&conn_info, connector);
> +
> +	notifier = cec_notifier_conn_register(priv->cec_glue.parent,
> +					      NULL, &conn_info);
> +	if (!notifier)
> +		return -ENOMEM;
> +	/*
> +	 * Make sure that tda998x_irq_thread does see the notifier
> +	 * when it fully constructed.
> +	 */
> +	smp_wmb();
> +	priv->cec_notify = notifier;
> +
>  	drm_connector_attach_encoder(&priv->connector,
>  				     priv->bridge.encoder);
>  
> @@ -1651,7 +1671,7 @@ static void tda998x_destroy(struct device *dev)
>  	i2c_unregister_device(priv->cec);
>  
>  	if (priv->cec_notify)
> -		cec_notifier_put(priv->cec_notify);
> +		cec_notifier_conn_unregister(priv->cec_notify);

You can drop the 'if': cec_notifier_conn_unregister() does nothing if
the notifier is NULL.

>  }
>  
>  static int tda998x_create(struct device *dev)
> @@ -1776,12 +1796,6 @@ static int tda998x_create(struct device *dev)
>  		cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
>  	}
>  
> -	priv->cec_notify = cec_notifier_get(dev);
> -	if (!priv->cec_notify) {
> -		ret = -ENOMEM;
> -		goto fail;
> -	}
> -
>  	priv->cec_glue.parent = dev;
>  	priv->cec_glue.data = priv;
>  	priv->cec_glue.init = tda998x_cec_hook_init;
> 

Regards,

	Hans

Re: [PATCH v2 2/5] drm: sti: use cec_notifier_conn_(un)register

[Hans Verkuil]

On 7/1/19 4:59 PM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill
> in the cec_connector_info.
> 
> Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
> ---
>  drivers/gpu/drm/sti/sti_hdmi.c | 20 +++++++++++++-------
>  1 file changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
> index 6000df6249807..5519b0c397c72 100644
> --- a/drivers/gpu/drm/sti/sti_hdmi.c
> +++ b/drivers/gpu/drm/sti/sti_hdmi.c
> @@ -1250,6 +1250,7 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
>  	struct drm_device *drm_dev = data;
>  	struct drm_encoder *encoder;
>  	struct sti_hdmi_connector *connector;
> +	struct cec_connector_info conn_info;
>  	struct drm_connector *drm_connector;
>  	struct drm_bridge *bridge;
>  	int err;
> @@ -1310,6 +1311,14 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
>  		goto err_sysfs;
>  	}
>  
> +	cec_fill_conn_info_from_drm(&conn_info, drm_connector);
> +	hdmi->notifier = cec_notifier_conn_register(&hdmi->dev, NULL,
> +						    &conn_info);
> +	if (!hdmi->notifier) {
> +		hdmi->drm_connector = NULL;
> +		return -ENOMEM;
> +	}
> +
>  	/* Enable default interrupts */
>  	hdmi_write(hdmi, HDMI_DEFAULT_INT, HDMI_INT_EN);
>  
> @@ -1323,6 +1332,10 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
>  static void sti_hdmi_unbind(struct device *dev,
>  		struct device *master, void *data)
>  {
> +	struct sti_hdmi *hdmi = dev_get_drvdata(dev);
> +
> +	cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID);

No need to do this, cec_notifier_conn_unregister() takes care of this.

> +	cec_notifier_conn_unregister(hdmi->notifier);
>  }
>  
>  static const struct component_ops sti_hdmi_ops = {
> @@ -1428,10 +1441,6 @@ static int sti_hdmi_probe(struct platform_device *pdev)
>  		goto release_adapter;
>  	}
>  
> -	hdmi->notifier = cec_notifier_get(&pdev->dev);
> -	if (!hdmi->notifier)
> -		goto release_adapter;
> -
>  	hdmi->reset = devm_reset_control_get(dev, "hdmi");
>  	/* Take hdmi out of reset */
>  	if (!IS_ERR(hdmi->reset))
> @@ -1451,14 +1460,11 @@ static int sti_hdmi_remove(struct platform_device *pdev)
>  {
>  	struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev);
>  
> -	cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID);
> -
>  	i2c_put_adapter(hdmi->ddc_adapt);
>  	if (hdmi->audio_pdev)
>  		platform_device_unregister(hdmi->audio_pdev);
>  	component_del(&pdev->dev, &sti_hdmi_ops);
>  
> -	cec_notifier_put(hdmi->notifier);
>  	return 0;
>  }
>  
> 

Regards,

	Hans

Re: [PATCH v2 3/5] drm: tegra: use cec_notifier_conn_(un)register

[Hans Verkuil]

On 7/1/19 4:59 PM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill in
> the cec_connector_info.
> 
> Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
> ---
>  drivers/gpu/drm/tegra/output.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
> index 9c2b9dad55c30..ea92e72280868 100644
> --- a/drivers/gpu/drm/tegra/output.c
> +++ b/drivers/gpu/drm/tegra/output.c
> @@ -80,6 +80,9 @@ tegra_output_connector_detect(struct drm_connector *connector, bool force)
>  
>  void tegra_output_connector_destroy(struct drm_connector *connector)
>  {
> +	struct tegra_output *output = connector_to_output(connector);
> +
> +	cec_notifier_conn_unregister(output->cec);
>  	drm_connector_unregister(connector);
>  	drm_connector_cleanup(connector);
>  }
> @@ -174,18 +177,11 @@ int tegra_output_probe(struct tegra_output *output)
>  		disable_irq(output->hpd_irq);
>  	}
>  
> -	output->cec = cec_notifier_get(output->dev);
> -	if (!output->cec)
> -		return -ENOMEM;
> -
>  	return 0;
>  }
>  
>  void tegra_output_remove(struct tegra_output *output)
>  {
> -	if (output->cec)
> -		cec_notifier_put(output->cec);
> -
>  	if (gpio_is_valid(output->hpd_gpio)) {
>  		free_irq(output->hpd_irq, output);
>  		gpio_free(output->hpd_gpio);
> @@ -197,6 +193,7 @@ void tegra_output_remove(struct tegra_output *output)
>  
>  int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
>  {
> +	struct cec_connector_info conn_info;
>  	int err;
>  
>  	if (output->panel) {
> @@ -212,6 +209,13 @@ int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
>  	if (gpio_is_valid(output->hpd_gpio))
>  		enable_irq(output->hpd_irq);
>  
> +	cec_fill_conn_info_from_drm(&conn_info, &output->connector);
> +
> +	output->cec = cec_notifier_conn_register(output->dev, NULL, &conn_info);
> +	if (!output->cec)
> +		return -ENOMEM;
> +
> +
>  	return 0;
>  }
>  
> 

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Regards,

	Hans

Re: [PATCH v2 4/5] drm: dw-hdmi: use cec_notifier_conn_(un)register

[Hans Verkuil]

On 7/1/19 4:59 PM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill in
> the cec_connector_info.
> 
> Changes since v1:
> 	Add memory barrier to make sure that the notifier
> 	becomes visible to the irq thread once it is fully
> 	constructed.
> 
> Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 37 +++++++++++++++--------
>  1 file changed, 24 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index ab7968c8f6a29..c0f4eb3c12b18 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2118,6 +2118,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
>  	struct dw_hdmi *hdmi = bridge->driver_private;
>  	struct drm_encoder *encoder = bridge->encoder;
>  	struct drm_connector *connector = &hdmi->connector;
> +	struct cec_connector_info conn_info;
> +	struct cec_notifier *notifier;
>  
>  	connector->interlace_allowed = 1;
>  	connector->polled = DRM_CONNECTOR_POLL_HPD;
> @@ -2129,6 +2131,18 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
>  
>  	drm_connector_attach_encoder(connector, encoder);
>  
> +	cec_fill_conn_info_from_drm(&conn_info, connector);
> +
> +	notifier = cec_notifier_conn_register(hdmi->dev, NULL, &conn_info);
> +	if (!notifier)
> +		return -ENOMEM;
> +	/*
> +	 * Make sure that dw_hdmi_irq thread does see the notifier
> +	 * when it fully constructed.
> +	 */
> +	smp_wmb();
> +	hdmi->cec_notifier = notifier;
> +
>  	return 0;
>  }
>  
> @@ -2295,9 +2309,15 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
>  				       phy_stat & HDMI_PHY_HPD,
>  				       phy_stat & HDMI_PHY_RX_SENSE);
>  
> -		if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
> -			cec_notifier_set_phys_addr(hdmi->cec_notifier,
> -						   CEC_PHYS_ADDR_INVALID);
> +		if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) {
> +			struct cec_notifier *notifer;
> +
> +			notifer = READ_ONCE(hdmi->cec_notifier);
> +			if (notifer)
> +				cec_notifier_set_phys_addr(
> +						notifer,
> +						CEC_PHYS_ADDR_INVALID);

Please replace with cec_notifier_phys_addr_invalidate().

> +		}
>  	}
>  
>  	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
> @@ -2600,12 +2620,6 @@ __dw_hdmi_probe(struct platform_device *pdev,
>  	if (ret)
>  		goto err_iahb;
>  
> -	hdmi->cec_notifier = cec_notifier_get(dev);
> -	if (!hdmi->cec_notifier) {
> -		ret = -ENOMEM;
> -		goto err_iahb;
> -	}
> -
>  	/*
>  	 * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
>  	 * N and cts values before enabling phy
> @@ -2693,9 +2707,6 @@ __dw_hdmi_probe(struct platform_device *pdev,
>  		hdmi->ddc = NULL;
>  	}
>  
> -	if (hdmi->cec_notifier)
> -		cec_notifier_put(hdmi->cec_notifier);
> -
>  	clk_disable_unprepare(hdmi->iahb_clk);
>  	if (hdmi->cec_clk)
>  		clk_disable_unprepare(hdmi->cec_clk);
> @@ -2718,7 +2729,7 @@ static void __dw_hdmi_remove(struct dw_hdmi *hdmi)
>  	hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
>  
>  	if (hdmi->cec_notifier)
> -		cec_notifier_put(hdmi->cec_notifier);
> +		cec_notifier_conn_unregister(hdmi->cec_notifier);

No need for the 'if', cec_notifier_conn_unregister() already checks for a NULL
notifier.

Regards,

	Hans

>  
>  	clk_disable_unprepare(hdmi->iahb_clk);
>  	clk_disable_unprepare(hdmi->isfr_clk);
> 

Re: [PATCH v2 5/5] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register

[Hans Verkuil]

On 7/1/19 4:59 PM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill in
> the cec_connector_info.
> 
> Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
> ---
>  drivers/gpu/drm/exynos/exynos_hdmi.c | 33 +++++++++++++++++-----------
>  1 file changed, 20 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index 19c252f659dd0..dec4149435de1 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -858,6 +858,11 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
>  
>  static void hdmi_connector_destroy(struct drm_connector *connector)
>  {
> +	struct hdmi_context *hdata = connector_to_hdmi(connector);
> +
> +	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);

You can drop this, cec_notifier_conn_unregister() takes care of this for you.

> +	cec_notifier_conn_unregister(hdata->notifier);
> +
>  	drm_connector_unregister(connector);
>  	drm_connector_cleanup(connector);
>  }
> @@ -941,6 +946,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
>  {
>  	struct hdmi_context *hdata = encoder_to_hdmi(encoder);
>  	struct drm_connector *connector = &hdata->connector;
> +	struct cec_connector_info conn_info;
>  	int ret;
>  
>  	connector->interlace_allowed = true;
> @@ -963,6 +969,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
>  			DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
>  	}
>  
> +	cec_fill_conn_info_from_drm(&conn_info, connector);
> +
> +	hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
> +						     &conn_info);
> +	if (hdata->notifier == NULL) {
> +		ret = -ENOMEM;
> +		DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
> +	}
> +
>  	return ret;
>  }
>  
> @@ -1534,8 +1549,9 @@ static void hdmi_disable(struct drm_encoder *encoder)
>  		 */
>  		mutex_unlock(&hdata->mutex);
>  		cancel_delayed_work(&hdata->hotplug_work);
> -		cec_notifier_set_phys_addr(hdata->notifier,
> -					   CEC_PHYS_ADDR_INVALID);
> +		if (hdata->notifier)
> +			cec_notifier_set_phys_addr(hdata->notifier,
> +						   CEC_PHYS_ADDR_INVALID);

Use cec_notifier_phys_addr_invalidate().

>  		return;
>  	}
>  
> @@ -2012,12 +2028,6 @@ static int hdmi_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	hdata->notifier = cec_notifier_get(&pdev->dev);
> -	if (hdata->notifier == NULL) {
> -		ret = -ENOMEM;
> -		goto err_hdmiphy;
> -	}
> -
>  	pm_runtime_enable(dev);
>  
>  	audio_infoframe = &hdata->audio.infoframe;
> @@ -2029,7 +2039,7 @@ static int hdmi_probe(struct platform_device *pdev)
>  
>  	ret = hdmi_register_audio_device(hdata);
>  	if (ret)
> -		goto err_notifier_put;
> +		goto err_runtime_disable;
>  
>  	ret = component_add(&pdev->dev, &hdmi_component_ops);
>  	if (ret)
> @@ -2040,8 +2050,7 @@ static int hdmi_probe(struct platform_device *pdev)
>  err_unregister_audio:
>  	platform_device_unregister(hdata->audio.pdev);
>  
> -err_notifier_put:
> -	cec_notifier_put(hdata->notifier);
> +err_runtime_disable:
>  	pm_runtime_disable(dev);
>  
>  err_hdmiphy:
> @@ -2060,12 +2069,10 @@ static int hdmi_remove(struct platform_device *pdev)
>  	struct hdmi_context *hdata = platform_get_drvdata(pdev);
>  
>  	cancel_delayed_work_sync(&hdata->hotplug_work);
> -	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
>  
>  	component_del(&pdev->dev, &hdmi_component_ops);
>  	platform_device_unregister(hdata->audio.pdev);
>  
> -	cec_notifier_put(hdata->notifier);
>  	pm_runtime_disable(&pdev->dev);
>  
>  	if (!IS_ERR(hdata->reg_hdmi_en))
> 

Regards,

	Hans

Re: [PATCH v2 0/5] cec: convert remaining drivers to the new notifier API

[Hans Verkuil]

Hi Dariusz,

On 7/1/19 4:59 PM, Dariusz Marcinkiewicz wrote:
> This series updates remaining drivers in DRM to use new CEC notifier API.
> 
> Those complement the "cec: improve notifier support, add
> connector info" patch series and also replace 2 following patches from
> there:
> - [PATCHv8 09/13] dw-hdmi: use cec_notifier_conn_(un)register
> - [PATCHv9 12/13] tda998x: use cec_notifier_conn_(un)register
> 
> None of those changes were not tested on a real hardware.

I assume you meant 'None of those changes were tested'?

I just reviewed this series. Apologies for the delay, I was out for a week and
then had to take care of other things.

When you post v3, can you include all older drm patches (i.e. tda9950, dw-hdmi-cec,
and the drm-dp-cec changes)?

That way there is only one patch series that I have to review.

Regards,

	Hans

> 
> Changes since v1:
> 	Those patches delay creation of notifiers until respective
> 	connectors are constructed. It seems that those patches, for a
> 	couple of drivers, by adding the delay, introduce a race between
> 	notifiers' creation and the IRQs handling threads - at least I
> 	don't see anything obvious in there that would explicitly forbid
> 	such races to occur. v2 adds a write barrier to make sure IRQ
> 	threads see the notifier once it is created (replacing the
> 	WRITE_ONCE I put in v1). The best thing to do here, I believe,
> 	would be not to have any synchronization and make sure that an IRQ
> 	only gets enabled after the notifier is created.
> 
> 
> Dariusz Marcinkiewicz (5):
>   drm: tda998x: use cec_notifier_conn_(un)register
>   drm: sti: use cec_notifier_conn_(un)register
>   drm: tegra: use cec_notifier_conn_(un)register
>   drm: dw-hdmi: use cec_notifier_conn_(un)register
>   drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 37 +++++++++++++++--------
>  drivers/gpu/drm/exynos/exynos_hdmi.c      | 33 ++++++++++++--------
>  drivers/gpu/drm/i2c/tda998x_drv.c         | 32 ++++++++++++++------
>  drivers/gpu/drm/sti/sti_hdmi.c            | 20 +++++++-----
>  drivers/gpu/drm/tegra/output.c            | 18 ++++++-----
>  5 files changed, 91 insertions(+), 49 deletions(-)
>