linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	tomoharu.fukawa.eb@renesas.com, linux-media@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v6 16/25] rcar-vin: break out format alignment and checking
Date: Mon, 25 Sep 2017 12:08:04 +0200	[thread overview]
Message-ID: <34d03f81-ff25-3fe0-8dee-33496ff9b46e@xs4all.nl> (raw)
In-Reply-To: <20170822232640.26147-17-niklas.soderlund+renesas@ragnatech.se>

On 23/08/17 01:26, Niklas Söderlund wrote:
> Part of the format aliment and checking can be shared with the Gen3

aliment -> alignment

> format handling. Break that part out to it's own function. While doing

it's -> its

> this clean up the checking and add more checks.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

Please note the small typo in a comment below.

Regards,

	Hans


> ---
>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 98 +++++++++++++++--------------
>  1 file changed, 51 insertions(+), 47 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index fb9f802e553e9b80..f71dea8d5d40323a 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -86,6 +86,56 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix)
>  	return pix->bytesperline * pix->height;
>  }
>  
> +static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
> +{
> +	u32 walign;
> +
> +	/* If requested format is not supported fallback to the default */
> +	if (!rvin_format_from_pixel(pix->pixelformat)) {
> +		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
> +			pix->pixelformat, RVIN_DEFAULT_FORMAT);
> +		pix->pixelformat = RVIN_DEFAULT_FORMAT;
> +	}
> +
> +	switch (pix->field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +		break;
> +	default:
> +		pix->field = V4L2_FIELD_NONE;
> +		break;
> +	}
> +
> +	/* Check that colorspace is resonable, if not keep current */

resonable -> reasonable

> +	if (!pix->colorspace || pix->colorspace >= 0xff)
> +		pix->colorspace = vin->format.colorspace;
> +
> +	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> +	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> +
> +	/* Limit to VIN capabilities */
> +	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> +			      &pix->height, 4, vin->info->max_height, 2, 0);
> +
> +	pix->bytesperline = rvin_format_bytesperline(pix);
> +	pix->sizeimage = rvin_format_sizeimage(pix);
> +
> +	if (vin->info->chip == RCAR_M1 &&
> +	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> +		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> +		return -EINVAL;
> +	}
> +
> +	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> +		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> +
> +	return 0;
> +}
> +
>  /* -----------------------------------------------------------------------------
>   * V4L2
>   */
> @@ -191,64 +241,18 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
>  static int __rvin_try_format(struct rvin_dev *vin,
>  			     u32 which, struct v4l2_pix_format *pix)
>  {
> -	u32 walign;
>  	int ret;
>  
>  	/* Keep current field if no specific one is asked for */
>  	if (pix->field == V4L2_FIELD_ANY)
>  		pix->field = vin->format.field;
>  
> -	/* If requested format is not supported fallback to the default */
> -	if (!rvin_format_from_pixel(pix->pixelformat)) {
> -		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
> -			pix->pixelformat, RVIN_DEFAULT_FORMAT);
> -		pix->pixelformat = RVIN_DEFAULT_FORMAT;
> -	}
> -
> -	/* Always recalculate */
> -	pix->bytesperline = 0;
> -	pix->sizeimage = 0;
> -
>  	/* Limit to source capabilities */
>  	ret = __rvin_try_format_source(vin, which, pix);
>  	if (ret)
>  		return ret;
>  
> -	switch (pix->field) {
> -	case V4L2_FIELD_TOP:
> -	case V4L2_FIELD_BOTTOM:
> -	case V4L2_FIELD_NONE:
> -	case V4L2_FIELD_INTERLACED_TB:
> -	case V4L2_FIELD_INTERLACED_BT:
> -	case V4L2_FIELD_INTERLACED:
> -		break;
> -	default:
> -		pix->field = V4L2_FIELD_NONE;
> -		break;
> -	}
> -
> -	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> -	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> -
> -	/* Limit to VIN capabilities */
> -	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> -			      &pix->height, 4, vin->info->max_height, 2, 0);
> -
> -	pix->bytesperline = max_t(u32, pix->bytesperline,
> -				  rvin_format_bytesperline(pix));
> -	pix->sizeimage = max_t(u32, pix->sizeimage,
> -			       rvin_format_sizeimage(pix));
> -
> -	if (vin->info->chip == RCAR_M1 &&
> -	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> -		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> -		return -EINVAL;
> -	}
> -
> -	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> -		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> -
> -	return 0;
> +	return rvin_format_align(vin, pix);
>  }
>  
>  static int rvin_querycap(struct file *file, void *priv,
> 

  reply	other threads:[~2017-09-25 10:08 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-22 23:26 [PATCH v6 00/25] rcar-vin: Add Gen3 with media controller Niklas Söderlund
2017-08-22 23:26 ` [PATCH v6 01/25] rcar-vin: add Gen3 devicetree bindings documentation Niklas Söderlund
2017-08-23  8:14   ` Laurent Pinchart
2017-08-22 23:26 ` [PATCH v6 02/25] rcar-vin: register the video device at probe time Niklas Söderlund
2017-08-23  8:43   ` Laurent Pinchart
2017-08-22 23:26 ` [PATCH v6 03/25] rcar-vin: move chip information to own struct Niklas Söderlund
2017-08-23 15:49   ` Laurent Pinchart
2017-09-25  9:44   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 04/25] rcar-vin: move max width and height information to chip information Niklas Söderlund
2017-09-25  9:45   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 05/25] rcar-vin: change name of video device Niklas Söderlund
2017-09-25  9:46   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 06/25] rcar-vin: move functions regarding scaling Niklas Söderlund
2017-09-25  9:46   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 07/25] rcar-vin: all Gen2 boards can scale simplify logic Niklas Söderlund
2017-09-25  9:48   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 08/25] rcar-vin: do not reset crop and compose when setting format Niklas Söderlund
2017-09-25  9:49   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 09/25] rcar-vin: do not allow changing scaling and composing while streaming Niklas Söderlund
2017-09-25  9:50   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 10/25] rcar-vin: read subdevice format for crop only when needed Niklas Söderlund
2017-09-25  9:54   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 11/25] rcar-vin: fix handling of single field frames (top, bottom and alternate fields) Niklas Söderlund
2017-09-25  9:58   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 12/25] rcar-vin: move media bus configuration to struct rvin_info Niklas Söderlund
2017-09-25 10:00   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 13/25] rcar-vin: enable Gen3 hardware configuration Niklas Söderlund
2017-09-25 10:01   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 14/25] rcar-vin: add functions to manipulate Gen3 CHSEL value Niklas Söderlund
2017-09-25 10:04   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 15/25] rcar-vin: add flag to switch to media controller mode Niklas Söderlund
2017-09-25 10:04   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 16/25] rcar-vin: break out format alignment and checking Niklas Söderlund
2017-09-25 10:08   ` Hans Verkuil [this message]
2017-08-22 23:26 ` [PATCH v6 17/25] rcar-vin: use different v4l2 operations in media controller mode Niklas Söderlund
2017-09-25 10:11   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 18/25] rcar-vin: prepare for media controller mode initialization Niklas Söderlund
2017-09-25 10:11   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 19/25] rcar-vin: add group allocator functions Niklas Söderlund
2017-09-25 10:22   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 20/25] rcar-vin: add chsel information to rvin_info Niklas Söderlund
2017-09-25 10:26   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 21/25] rcar-vin: parse Gen3 OF and setup media graph Niklas Söderlund
2017-09-25 10:36   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 22/25] rcar-vin: add link notify for Gen3 Niklas Söderlund
2017-09-25 10:43   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller Niklas Söderlund
2017-09-25 10:46   ` Hans Verkuil
2017-08-22 23:26 ` [PATCH v6 24/25] rcar-vin: enable support for r8a7795 Niklas Söderlund
2017-09-25 10:47   ` Hans Verkuil
2017-10-03  8:30   ` Geert Uytterhoeven
2017-08-22 23:26 ` [PATCH v6 25/25] rcar-vin: enable support for r8a7796 Niklas Söderlund
2017-09-25 10:47   ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=34d03f81-ff25-3fe0-8dee-33496ff9b46e@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomoharu.fukawa.eb@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).