linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
	ezequiel@collabora.com, p.zabel@pengutronix.de,
	mchehab@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	festevam@gmail.com, gregkh@linuxfoundation.org,
	mripard@kernel.org, paul.kocialkowski@bootlin.com, wens@csie.org,
	jernej.skrabec@siol.net, emil.l.velikov@gmail.com
Cc: kernel@pengutronix.de, linux-imx@nxp.com,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v11 9/9] media: hantro: IMX8M: add variant for G2/HEVC codec
Date: Wed, 26 May 2021 13:10:57 +0200	[thread overview]
Message-ID: <3bd6a50d-6a70-ec17-2e9e-bb515ad5e832@collabora.com> (raw)
In-Reply-To: <1454f153-c04b-6b90-8467-54bb33c6f3fa@xs4all.nl>


Le 26/05/2021 à 11:52, Hans Verkuil a écrit :
> On 25/05/2021 18:12, Benjamin Gaignard wrote:
>> Add variant to IMX8M to enable G2/HEVC codec.
>> Define the capabilities for the hardware up to 3840x2160.
>> G2 doesn't have a postprocessor, uses the same clocks and has it
>> own interrupt.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
>> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
>> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
>> ---
>>   drivers/staging/media/hantro/hantro_drv.c   |  1 +
>>   drivers/staging/media/hantro/hantro_hw.h    |  1 +
>>   drivers/staging/media/hantro/imx8m_vpu_hw.c | 96 ++++++++++++++++++++-
>>   3 files changed, 96 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
>> index ae8a0037706f..507cd5b454b3 100644
>> --- a/drivers/staging/media/hantro/hantro_drv.c
>> +++ b/drivers/staging/media/hantro/hantro_drv.c
>> @@ -588,6 +588,7 @@ static const struct of_device_id of_hantro_match[] = {
>>   #endif
>>   #ifdef CONFIG_VIDEO_HANTRO_IMX8M
>>   	{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
>> +	{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
>  From checkpatch:
>
> WARNING: DT compatible string "nxp,imx8mq-vpu-g2" appears un-documented -- check ./Documentation/devicetree/bindings/
> #29: FILE: drivers/staging/media/hantro/hantro_drv.c:591:
> +       { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
>
> Is a patch missing for bindings adding "nxp,imx8mq-vpu-g2"?

The DT and bindings patches are delayed because NXP guys want to use power domain to drive
the control block:
https://lore.kernel.org/linux-media/20210407073534.376722-1-benjamin.gaignard@collabora.com/T/#m6bd571fee94b1b1fa5c5d3fa6315ae5c9f4c8fad

Regards,
Benjamin

>
> Regards,
>
> 	Hans
>
>
>>   #endif
>>   #ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
>>   	{ .compatible = "microchip,sama5d4-vdec", .data = &sama5d4_vdec_variant, },
>> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
>> index b743b255bf32..5cc083112017 100644
>> --- a/drivers/staging/media/hantro/hantro_hw.h
>> +++ b/drivers/staging/media/hantro/hantro_hw.h
>> @@ -206,6 +206,7 @@ extern const struct hantro_variant rk3328_vpu_variant;
>>   extern const struct hantro_variant rk3288_vpu_variant;
>>   extern const struct hantro_variant imx8mq_vpu_variant;
>>   extern const struct hantro_variant sama5d4_vdec_variant;
>> +extern const struct hantro_variant imx8mq_vpu_g2_variant;
>>   
>>   extern const struct hantro_postproc_regs hantro_g1_postproc_regs;
>>   
>> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> index 9eb556460e52..ea152e1e6514 100644
>> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> @@ -9,6 +9,9 @@
>>   #include <linux/delay.h>
>>   
>>   #include "hantro.h"
>> +#include "hantro_jpeg.h"
>> +#include "hantro_g1_regs.h"
>> +#include "hantro_g2_regs.h"
>>   
>>   #define CTRL_SOFT_RESET		0x00
>>   #define RESET_G1		BIT(1)
>> @@ -128,6 +131,62 @@ static const struct hantro_fmt imx8m_vpu_dec_fmts[] = {
>>   	},
>>   };
>>   
>> +static const struct hantro_fmt imx8m_vpu_g2_dec_fmts[] = {
>> +	{
>> +		.fourcc = V4L2_PIX_FMT_NV12,
>> +		.codec_mode = HANTRO_MODE_NONE,
>> +	},
>> +	{
>> +		.fourcc = V4L2_PIX_FMT_HEVC_SLICE,
>> +		.codec_mode = HANTRO_MODE_HEVC_DEC,
>> +		.max_depth = 2,
>> +		.frmsize = {
>> +			.min_width = 48,
>> +			.max_width = 3840,
>> +			.step_width = MB_DIM,
>> +			.min_height = 48,
>> +			.max_height = 2160,
>> +			.step_height = MB_DIM,
>> +		},
>> +	},
>> +};
>> +
>> +static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>> +{
>> +	struct hantro_dev *vpu = dev_id;
>> +	enum vb2_buffer_state state;
>> +	u32 status;
>> +
>> +	status = vdpu_read(vpu, G1_REG_INTERRUPT);
>> +	state = (status & G1_REG_INTERRUPT_DEC_RDY_INT) ?
>> +		 VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
>> +
>> +	vdpu_write(vpu, 0, G1_REG_INTERRUPT);
>> +	vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
>> +
>> +	hantro_irq_done(vpu, state);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t imx8m_vpu_g2_irq(int irq, void *dev_id)
>> +{
>> +	struct hantro_dev *vpu = dev_id;
>> +	enum vb2_buffer_state state;
>> +	u32 status;
>> +
>> +	status = vdpu_read(vpu, HEVC_REG_INTERRUPT);
>> +	state = (status & HEVC_REG_INTERRUPT_DEC_RDY_INT) ?
>> +		 VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
>> +
>> +	vdpu_write(vpu, 0, HEVC_REG_INTERRUPT);
>> +	vdpu_write(vpu, HEVC_REG_CONFIG_DEC_CLK_GATE_E, HEVC_REG_CONFIG);
>> +
>> +	hantro_irq_done(vpu, state);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>>   static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
>>   {
>>   	vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
>> @@ -142,6 +201,13 @@ static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
>>   	imx8m_soft_reset(vpu, RESET_G1);
>>   }
>>   
>> +static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
>> +{
>> +	struct hantro_dev *vpu = ctx->dev;
>> +
>> +	imx8m_soft_reset(vpu, RESET_G2);
>> +}
>> +
>>   /*
>>    * Supported codec ops.
>>    */
>> @@ -167,13 +233,25 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
>>   	},
>>   };
>>   
>> +static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
>> +	[HANTRO_MODE_HEVC_DEC] = {
>> +		.run = hantro_g2_hevc_dec_run,
>> +		.reset = imx8m_vpu_g2_reset,
>> +		.init = hantro_hevc_dec_init,
>> +		.exit = hantro_hevc_dec_exit,
>> +	},
>> +};
>> +
>>   /*
>>    * VPU variants.
>>    */
>>   
>>   static const struct hantro_irq imx8mq_irqs[] = {
>> -	{ "g1", hantro_g1_irq },
>> -	{ "g2", NULL /* TODO: imx8m_vpu_g2_irq */ },
>> +	{ "g1", imx8m_vpu_g1_irq },
>> +};
>> +
>> +static const struct hantro_irq imx8mq_g2_irqs[] = {
>> +	{ "g2", imx8m_vpu_g2_irq },
>>   };
>>   
>>   static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
>> @@ -197,3 +275,17 @@ const struct hantro_variant imx8mq_vpu_variant = {
>>   	.reg_names = imx8mq_reg_names,
>>   	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
>>   };
>> +
>> +const struct hantro_variant imx8mq_vpu_g2_variant = {
>> +	.dec_offset = 0x0,
>> +	.dec_fmts = imx8m_vpu_g2_dec_fmts,
>> +	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts),
>> +	.codec = HANTRO_HEVC_DECODER,
>> +	.codec_ops = imx8mq_vpu_g2_codec_ops,
>> +	.init = imx8mq_vpu_hw_init,
>> +	.runtime_resume = imx8mq_runtime_resume,
>> +	.irqs = imx8mq_g2_irqs,
>> +	.num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
>> +	.clk_names = imx8mq_clk_names,
>> +	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
>> +};
>>

      reply	other threads:[~2021-05-26 11:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-25 16:12 [PATCH v11 0/9] Add HANTRO G2/HEVC decoder support for IMX8MQ Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 1/9] media: hevc: Add fields and flags for hevc PPS Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 2/9] media: hevc: Add decode params control Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 3/9] media: hantro: change hantro_codec_ops run prototype to return errors Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 4/9] media: hantro: Define HEVC codec profiles and supported features Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 5/9] media: hantro: Only use postproc when post processed formats are defined Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 6/9] media: uapi: Add a control for HANTRO driver Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 7/9] media: hantro: handle V4L2_PIX_FMT_HEVC_SLICE control Benjamin Gaignard
2021-05-25 16:12 ` [PATCH v11 8/9] media: hantro: Introduce G2/HEVC decoder Benjamin Gaignard
2021-05-26  9:58   ` Hans Verkuil
2021-05-26 10:12   ` Ezequiel Garcia
2021-05-25 16:12 ` [PATCH v11 9/9] media: hantro: IMX8M: add variant for G2/HEVC codec Benjamin Gaignard
2021-05-26  9:52   ` Hans Verkuil
2021-05-26 11:10     ` Benjamin Gaignard [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3bd6a50d-6a70-ec17-2e9e-bb515ad5e832@collabora.com \
    --to=benjamin.gaignard@collabora.com \
    --cc=emil.l.velikov@gmail.com \
    --cc=ezequiel@collabora.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hverkuil@xs4all.nl \
    --cc=jernej.skrabec@siol.net \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).