From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.3 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED, USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C07FBC3A5A9 for ; Mon, 4 May 2020 15:21:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 364E62054F for ; Mon, 4 May 2020 15:21:20 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=xs4all.nl header.i=@xs4all.nl header.b="gwHNN/0U" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728700AbgEDPVT (ORCPT ); Mon, 4 May 2020 11:21:19 -0400 Received: from lb1-smtp-cloud8.xs4all.net ([194.109.24.21]:38801 "EHLO lb1-smtp-cloud8.xs4all.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725941AbgEDPVT (ORCPT ); Mon, 4 May 2020 11:21:19 -0400 Received: from cust-b5b5937f ([IPv6:fc0c:c16d:66b8:757f:c639:739b:9d66:799d]) by smtp-cloud8.xs4all.net with ESMTPA id VctxjOiEphEkrVcu0jv9EX; Mon, 04 May 2020 17:21:05 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xs4all.nl; s=s1; t=1588605665; bh=aBGYqCuwNXpdcQofKX4u594bux7sKpRpEh19V3HAu+g=; h=Subject:To:From:Message-ID:Date:MIME-Version:Content-Type:From: Subject; b=gwHNN/0U+95uLgPW2B9WwYOOr06glNwiDKqroLTi/DVepgCydHBvuyLKlA0A6OcA9 teZwQnmsUG3iQD4Knpti+cIQp79mt5z3jHyaXFEkt6AtJKwaYnnAbTIPkemVYRdVQq 9cglbku8DsPfv/xFLQRst0AXzgvw8yauLRIl+NgAn4oR50nKGbLE6iaYnhwbqeAwaf X/o/RW95v2ZFg25fp7sKdcw5+QiWdkzrktN1pSq27yYPg8aRJuC3sdGkOeyMBC4Zz7 fFa7iFRmPkHOlcvj+eLznCFHggwY8l6OFUxeNNRTiNQW9woqlLDrWYyEES4u38ONoT lhc52ZaTmCsOw== Subject: Re: [PATCH v2 04/34] media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface To: Laurent Pinchart , linux-media@vger.kernel.org Cc: Kieran Bingham , Jacopo Mondi , =?UTF-8?Q?Niklas_S=c3=b6derlund?= , Naushir Patuck , Dave Stevenson References: <20200504092611.9798-1-laurent.pinchart@ideasonboard.com> <20200504092611.9798-5-laurent.pinchart@ideasonboard.com> From: Hans Verkuil Message-ID: <3d55af61-cfce-6b7a-1b1a-3bfb47380c91@xs4all.nl> Date: Mon, 4 May 2020 17:21:01 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0 MIME-Version: 1.0 In-Reply-To: <20200504092611.9798-5-laurent.pinchart@ideasonboard.com> Content-Type: text/plain; charset=utf-8 Content-Language: en-US Content-Transfer-Encoding: 8bit X-CMAE-Envelope: MS4wfA9zlMthBJZ4V5zKLVH8LeBkF5mKH4kNAK7kdt8eB4Cg2/0DI6XvAbSd0CDYP65hBxuYSGZcu8yMudyPPxyUpyED9ZkE0K0kPGR8gl82FooYQ1w+xJlm PctJPSsjTPq2h1SdYOol422ZfC336qm9H6zCJdUwAOxaxq025usVpK/MHZTwYDnZw1oG6WnzW3TWTt59hlY8d+2QXdYHLwtyc5q0MQ2/46x1rUYxU81TAC6X JikCG0uZKTLbClry0UoVBnxG14aUsbEAsY9w1V4ruIUvxp9nQI4WW3IuEvWOUeNBKKxYb0e0dn8duuFI/LE1arM8LSCkD2+PgmUVpnIV9Zskfj/dj4pjOIJj x927toAqfboWmbk1XlXWCh5qPcBsCOzkka+xpKo1tbpFaBklTrHtclCbaHF7JVgUmtzwufvc Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Some quick review comments: On 04/05/2020 11:25, Laurent Pinchart wrote: > From: Naushir Patuck > > Add a driver for the Unicam camera receiver block on BCM283x processors. > Compared to the bcm2835-camera driver present in staging, this driver > handles the Unicam block only (CSI-2 receiver), and doesn't depend on > the VC4 firmware running on the VPU. > > The commit is made up of a series of changes cherry-picked from the > rpi-5.4.y branch of https://github.com/raspberrypi/linux/ with > additional enhancements, forward-ported to the mainline kernel. > > Signed-off-by: Dave Stevenson > Signed-off-by: Naushir Patuck > Signed-off-by: Laurent Pinchart > --- > Changes since v1: > > - Re-fetch mbus code from subdev on a g_fmt call > - Group all ioctl disabling together > - Fix reference counting in unicam_open > - Add support for VIDIOC_[S|G]_SELECTION > --- > MAINTAINERS | 7 + > drivers/media/platform/Kconfig | 1 + > drivers/media/platform/Makefile | 2 + > drivers/media/platform/bcm2835/Kconfig | 15 + > drivers/media/platform/bcm2835/Makefile | 3 + > .../media/platform/bcm2835/bcm2835-unicam.c | 2825 +++++++++++++++++ > .../media/platform/bcm2835/vc4-regs-unicam.h | 253 ++ > 7 files changed, 3106 insertions(+) > create mode 100644 drivers/media/platform/bcm2835/Kconfig > create mode 100644 drivers/media/platform/bcm2835/Makefile > create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c > create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index b816a453b10e..edf5b8d9c98a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3341,6 +3341,13 @@ N: bcm113* > N: bcm216* > N: kona > > +BROADCOM BCM2835 CAMERA DRIVER > +M: Raspberry Pi Kernel Maintenance > +L: linux-media@vger.kernel.org > +S: Maintained > +F: drivers/media/platform/bcm2835/ > +F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml > + > BROADCOM BCM47XX MIPS ARCHITECTURE > M: Hauke Mehrtens > M: Rafał Miłecki > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig > index e01bbb9dd1c1..98721a4e0be1 100644 > --- a/drivers/media/platform/Kconfig > +++ b/drivers/media/platform/Kconfig > @@ -146,6 +146,7 @@ source "drivers/media/platform/am437x/Kconfig" > source "drivers/media/platform/xilinx/Kconfig" > source "drivers/media/platform/rcar-vin/Kconfig" > source "drivers/media/platform/atmel/Kconfig" > +source "drivers/media/platform/bcm2835/Kconfig" > source "drivers/media/platform/sunxi/Kconfig" > > config VIDEO_TI_CAL > diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile > index d13db96e3015..a425e4d2e3f3 100644 > --- a/drivers/media/platform/Makefile > +++ b/drivers/media/platform/Makefile > @@ -98,4 +98,6 @@ obj-y += meson/ > > obj-y += cros-ec-cec/ > > +obj-y += bcm2835/ > + > obj-y += sunxi/ > diff --git a/drivers/media/platform/bcm2835/Kconfig b/drivers/media/platform/bcm2835/Kconfig > new file mode 100644 > index 000000000000..ec46e3ef053c > --- /dev/null > +++ b/drivers/media/platform/bcm2835/Kconfig > @@ -0,0 +1,15 @@ > +# Broadcom VideoCore4 V4L2 camera support > + > +config VIDEO_BCM2835_UNICAM > + tristate "Broadcom BCM2835 Unicam video capture driver" > + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER > + depends on ARCH_BCM2835 || COMPILE_TEST > + select VIDEOBUF2_DMA_CONTIG > + select V4L2_FWNODE > + help > + Say Y here to enable support for the BCM2835 CSI-2 receiver. This is a > + V4L2 driver that controls the CSI-2 receiver directly, independently > + from the VC4 firmware. > + > + To compile this driver as a module, choose M here. The module will be > + called bcm2835-unicam. > diff --git a/drivers/media/platform/bcm2835/Makefile b/drivers/media/platform/bcm2835/Makefile > new file mode 100644 > index 000000000000..a98aba03598a > --- /dev/null > +++ b/drivers/media/platform/bcm2835/Makefile > @@ -0,0 +1,3 @@ > +# Makefile for BCM2835 Unicam driver > + > +obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o > diff --git a/drivers/media/platform/bcm2835/bcm2835-unicam.c b/drivers/media/platform/bcm2835/bcm2835-unicam.c > new file mode 100644 > index 000000000000..2e9387cbc1e0 > --- /dev/null > +++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c > @@ -0,0 +1,2825 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * BCM2835 Unicam Capture Driver > + * > + * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd. > + * > + * Dave Stevenson > + * > + * Based on TI am437x driver by > + * Benoit Parrot > + * Lad, Prabhakar > + * > + * and TI CAL camera interface driver by > + * Benoit Parrot > + * > + * > + * There are two camera drivers in the kernel for BCM283x - this one > + * and bcm2835-camera (currently in staging). > + * > + * This driver directly controls the Unicam peripheral - there is no > + * involvement with the VideoCore firmware. Unicam receives CSI-2 or > + * CCP2 data and writes it into SDRAM. > + * The only potential processing options are to repack Bayer data into an > + * alternate format, and applying windowing. > + * The repacking does not shift the data, so can repack V4L2_PIX_FMT_Sxxxx10P > + * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12, > + * but not generically up to V4L2_PIX_FMT_Sxxxx16. The driver will add both > + * formats where the relevant formats are defined, and will automatically > + * configure the repacking as required. > + * Support for windowing may be added later. > + * > + * It should be possible to connect this driver to any sensor with a > + * suitable output interface and V4L2 subdevice driver. > + * > + * bcm2835-camera uses the VideoCore firmware to control the sensor, > + * Unicam, ISP, and all tuner control loops. Fully processed frames are > + * delivered to the driver by the firmware. It only has sensor drivers > + * for Omnivision OV5647, and Sony IMX219 sensors. > + * > + * The two drivers are mutually exclusive for the same Unicam instance. > + * The VideoCore firmware checks the device tree configuration during boot. > + * If it finds device tree nodes called csi0 or csi1 it will block the > + * firmware from accessing the peripheral, and bcm2835-camera will > + * not be able to stream data. Very useful information. Should perhaps be added to the Kconfig description as well. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "vc4-regs-unicam.h" > + > +#define UNICAM_MODULE_NAME "unicam" > +#define UNICAM_VERSION "0.1.0" > + > +static int debug; > +module_param(debug, int, 0644); > +MODULE_PARM_DESC(debug, "Debug level 0-3"); > + > +#define unicam_dbg(level, dev, fmt, arg...) \ > + v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg) > +#define unicam_info(dev, fmt, arg...) \ > + v4l2_info(&(dev)->v4l2_dev, fmt, ##arg) > +#define unicam_err(dev, fmt, arg...) \ > + v4l2_err(&(dev)->v4l2_dev, fmt, ##arg) > + > +/* > + * To protect against a dodgy sensor driver never returning an error from > + * enum_mbus_code, set a maximum index value to be used. > + */ > +#define MAX_ENUM_MBUS_CODE 128 > + > +/* > + * Stride is a 16 bit register, but also has to be a multiple of 32. > + */ > +#define BPL_ALIGNMENT 32 > +#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT) > +/* > + * Max width is therefore determined by the max stride divided by > + * the number of bits per pixel. Take 32bpp as a > + * worst case. > + * No imposed limit on the height, so adopt a square image for want > + * of anything better. > + */ > +#define MAX_WIDTH (MAX_BYTESPERLINE / 4) > +#define MAX_HEIGHT MAX_WIDTH > +/* Define a nominal minimum image size */ > +#define MIN_WIDTH 16 > +#define MIN_HEIGHT 16 > +/* Default size of the embedded buffer */ > +#define UNICAM_EMBEDDED_SIZE 8192 > + > +/* > + * Size of the dummy buffer. Can be any size really, but the DMA > + * allocation works in units of page sizes. > + */ > +#define DUMMY_BUF_SIZE (PAGE_SIZE) > + > +enum pad_types { > + IMAGE_PAD, > + METADATA_PAD, > + MAX_NODES > +}; > + > +/* > + * struct unicam_fmt - Unicam media bus format information > + * @pixelformat: V4L2 pixel format FCC identifier. 0 if n/a. > + * @repacked_fourcc: V4L2 pixel format FCC identifier if the data is expanded > + * out to 16bpp. 0 if n/a. > + * @code: V4L2 media bus format code. > + * @depth: Bits per pixel as delivered from the source. > + * @csi_dt: CSI data type. > + * @check_variants: Flag to denote that there are multiple mediabus formats > + * still in the list that could match this V4L2 format. > + */ > +struct unicam_fmt { > + u32 fourcc; > + u32 repacked_fourcc; > + u32 code; > + u8 depth; > + u8 csi_dt; > + u8 check_variants; > +}; > + > +static const struct unicam_fmt formats[] = { > + /* YUV Formats */ > + { > + .fourcc = V4L2_PIX_FMT_YUYV, > + .code = MEDIA_BUS_FMT_YUYV8_2X8, > + .depth = 16, > + .csi_dt = 0x1e, > + .check_variants = 1, > + }, { > + .fourcc = V4L2_PIX_FMT_UYVY, > + .code = MEDIA_BUS_FMT_UYVY8_2X8, > + .depth = 16, > + .csi_dt = 0x1e, > + .check_variants = 1, > + }, { > + .fourcc = V4L2_PIX_FMT_YVYU, > + .code = MEDIA_BUS_FMT_YVYU8_2X8, > + .depth = 16, > + .csi_dt = 0x1e, > + .check_variants = 1, > + }, { > + .fourcc = V4L2_PIX_FMT_VYUY, > + .code = MEDIA_BUS_FMT_VYUY8_2X8, > + .depth = 16, > + .csi_dt = 0x1e, > + .check_variants = 1, > + }, { > + .fourcc = V4L2_PIX_FMT_YUYV, > + .code = MEDIA_BUS_FMT_YUYV8_1X16, > + .depth = 16, > + .csi_dt = 0x1e, > + }, { > + .fourcc = V4L2_PIX_FMT_UYVY, > + .code = MEDIA_BUS_FMT_UYVY8_1X16, > + .depth = 16, > + .csi_dt = 0x1e, > + }, { > + .fourcc = V4L2_PIX_FMT_YVYU, > + .code = MEDIA_BUS_FMT_YVYU8_1X16, > + .depth = 16, > + .csi_dt = 0x1e, > + }, { > + .fourcc = V4L2_PIX_FMT_VYUY, > + .code = MEDIA_BUS_FMT_VYUY8_1X16, > + .depth = 16, > + .csi_dt = 0x1e, > + }, { > + /* RGB Formats */ > + .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ > + .code = MEDIA_BUS_FMT_RGB565_2X8_LE, > + .depth = 16, > + .csi_dt = 0x22, > + }, { > + .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ > + .code = MEDIA_BUS_FMT_RGB565_2X8_BE, > + .depth = 16, > + .csi_dt = 0x22 > + }, { > + .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ > + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, > + .depth = 16, > + .csi_dt = 0x21, > + }, { > + .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ > + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, > + .depth = 16, > + .csi_dt = 0x21, > + }, { > + .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ > + .code = MEDIA_BUS_FMT_RGB888_1X24, > + .depth = 24, > + .csi_dt = 0x24, > + }, { > + .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ > + .code = MEDIA_BUS_FMT_BGR888_1X24, > + .depth = 24, > + .csi_dt = 0x24, > + }, { > + .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ > + .code = MEDIA_BUS_FMT_ARGB8888_1X32, > + .depth = 32, > + .csi_dt = 0x0, > + }, { > + /* Bayer Formats */ > + .fourcc = V4L2_PIX_FMT_SBGGR8, > + .code = MEDIA_BUS_FMT_SBGGR8_1X8, > + .depth = 8, > + .csi_dt = 0x2a, > + }, { > + .fourcc = V4L2_PIX_FMT_SGBRG8, > + .code = MEDIA_BUS_FMT_SGBRG8_1X8, > + .depth = 8, > + .csi_dt = 0x2a, > + }, { > + .fourcc = V4L2_PIX_FMT_SGRBG8, > + .code = MEDIA_BUS_FMT_SGRBG8_1X8, > + .depth = 8, > + .csi_dt = 0x2a, > + }, { > + .fourcc = V4L2_PIX_FMT_SRGGB8, > + .code = MEDIA_BUS_FMT_SRGGB8_1X8, > + .depth = 8, > + .csi_dt = 0x2a, > + }, { > + .fourcc = V4L2_PIX_FMT_SBGGR10P, > + .repacked_fourcc = V4L2_PIX_FMT_SBGGR10, > + .code = MEDIA_BUS_FMT_SBGGR10_1X10, > + .depth = 10, > + .csi_dt = 0x2b, > + }, { > + .fourcc = V4L2_PIX_FMT_SGBRG10P, > + .repacked_fourcc = V4L2_PIX_FMT_SGBRG10, > + .code = MEDIA_BUS_FMT_SGBRG10_1X10, > + .depth = 10, > + .csi_dt = 0x2b, > + }, { > + .fourcc = V4L2_PIX_FMT_SGRBG10P, > + .repacked_fourcc = V4L2_PIX_FMT_SGRBG10, > + .code = MEDIA_BUS_FMT_SGRBG10_1X10, > + .depth = 10, > + .csi_dt = 0x2b, > + }, { > + .fourcc = V4L2_PIX_FMT_SRGGB10P, > + .repacked_fourcc = V4L2_PIX_FMT_SRGGB10, > + .code = MEDIA_BUS_FMT_SRGGB10_1X10, > + .depth = 10, > + .csi_dt = 0x2b, > + }, { > + .fourcc = V4L2_PIX_FMT_SBGGR12P, > + .repacked_fourcc = V4L2_PIX_FMT_SBGGR12, > + .code = MEDIA_BUS_FMT_SBGGR12_1X12, > + .depth = 12, > + .csi_dt = 0x2c, > + }, { > + .fourcc = V4L2_PIX_FMT_SGBRG12P, > + .repacked_fourcc = V4L2_PIX_FMT_SGBRG12, > + .code = MEDIA_BUS_FMT_SGBRG12_1X12, > + .depth = 12, > + .csi_dt = 0x2c, > + }, { > + .fourcc = V4L2_PIX_FMT_SGRBG12P, > + .repacked_fourcc = V4L2_PIX_FMT_SGRBG12, > + .code = MEDIA_BUS_FMT_SGRBG12_1X12, > + .depth = 12, > + .csi_dt = 0x2c, > + }, { > + .fourcc = V4L2_PIX_FMT_SRGGB12P, > + .repacked_fourcc = V4L2_PIX_FMT_SRGGB12, > + .code = MEDIA_BUS_FMT_SRGGB12_1X12, > + .depth = 12, > + .csi_dt = 0x2c, > + }, { > + .fourcc = V4L2_PIX_FMT_SBGGR14P, > + .code = MEDIA_BUS_FMT_SBGGR14_1X14, > + .depth = 14, > + .csi_dt = 0x2d, > + }, { > + .fourcc = V4L2_PIX_FMT_SGBRG14P, > + .code = MEDIA_BUS_FMT_SGBRG14_1X14, > + .depth = 14, > + .csi_dt = 0x2d, > + }, { > + .fourcc = V4L2_PIX_FMT_SGRBG14P, > + .code = MEDIA_BUS_FMT_SGRBG14_1X14, > + .depth = 14, > + .csi_dt = 0x2d, > + }, { > + .fourcc = V4L2_PIX_FMT_SRGGB14P, > + .code = MEDIA_BUS_FMT_SRGGB14_1X14, > + .depth = 14, > + .csi_dt = 0x2d, > + }, { > + /* > + * 16 bit Bayer formats could be supported, but there is no CSI2 > + * data_type defined for raw 16, and no sensors that produce it at > + * present. > + */ > + > + /* Greyscale formats */ > + .fourcc = V4L2_PIX_FMT_GREY, > + .code = MEDIA_BUS_FMT_Y8_1X8, > + .depth = 8, > + .csi_dt = 0x2a, > + }, { > + .fourcc = V4L2_PIX_FMT_Y10P, > + .repacked_fourcc = V4L2_PIX_FMT_Y10, > + .code = MEDIA_BUS_FMT_Y10_1X10, > + .depth = 10, > + .csi_dt = 0x2b, > + }, { > + /* NB There is no packed V4L2 fourcc for this format. */ > + .repacked_fourcc = V4L2_PIX_FMT_Y12, > + .code = MEDIA_BUS_FMT_Y12_1X12, > + .depth = 12, > + .csi_dt = 0x2c, > + }, > + /* Embedded data format */ > + { > + .fourcc = V4L2_META_FMT_SENSOR_DATA, > + .code = MEDIA_BUS_FMT_SENSOR_DATA, > + .depth = 8, > + } > +}; > + > +struct unicam_buffer { > + struct vb2_v4l2_buffer vb; > + struct list_head list; > +}; > + > +static inline struct unicam_buffer *to_unicam_buffer(struct vb2_buffer *vb) > +{ > + return container_of(vb, struct unicam_buffer, vb.vb2_buf); > +} > + > +struct unicam_node { > + bool registered; > + int open; > + bool streaming; > + unsigned int pad_id; > + /* Pointer pointing to current v4l2_buffer */ > + struct unicam_buffer *cur_frm; > + /* Pointer pointing to next v4l2_buffer */ > + struct unicam_buffer *next_frm; > + /* video capture */ > + const struct unicam_fmt *fmt; > + /* Used to store current pixel format */ > + struct v4l2_format v_fmt; > + /* Used to store current mbus frame format */ > + struct v4l2_mbus_framefmt m_fmt; > + /* Buffer queue used in video-buf */ > + struct vb2_queue buffer_queue; > + /* Queue of filled frames */ > + struct list_head dma_queue; > + /* IRQ lock for DMA queue */ > + spinlock_t dma_queue_lock; > + /* lock used to access this structure */ > + struct mutex lock; > + /* Identifies video device for this channel */ > + struct video_device video_dev; > + /* Pointer to the parent handle */ > + struct unicam_device *dev; > + struct media_pad pad; > + unsigned int embedded_lines; > + /* > + * Dummy buffer intended to be used by unicam > + * if we have no other queued buffers to swap to. > + */ > + void *dummy_buf_cpu_addr; > + dma_addr_t dummy_buf_dma_addr; > +}; > + > +struct unicam_device { > + struct kref kref; > + > + /* V4l2 specific parameters */ > + struct v4l2_async_subdev asd; > + > + /* peripheral base address */ > + void __iomem *base; > + /* clock gating base address */ > + void __iomem *clk_gate_base; > + /* clock handle */ > + struct clk *clock; > + /* V4l2 device */ > + struct v4l2_device v4l2_dev; > + struct media_device mdev; > + > + /* parent device */ > + struct platform_device *pdev; > + /* subdevice async Notifier */ > + struct v4l2_async_notifier notifier; > + unsigned int sequence; > + > + /* ptr to sub device */ > + struct v4l2_subdev *sensor; > + /* Pad config for the sensor */ > + struct v4l2_subdev_pad_config *sensor_config; > + > + enum v4l2_mbus_type bus_type; > + /* > + * Stores bus.mipi_csi2.flags for CSI2 sensors, or > + * bus.mipi_csi1.strobe for CCP2. > + */ > + unsigned int bus_flags; > + unsigned int max_data_lanes; > + unsigned int active_data_lanes; > + bool sensor_embedded_data; > + > + struct unicam_node node[MAX_NODES]; > + struct v4l2_ctrl_handler ctrl_handler; > +}; > + > +static inline struct unicam_device * > +to_unicam_device(struct v4l2_device *v4l2_dev) > +{ > + return container_of(v4l2_dev, struct unicam_device, v4l2_dev); > +} > + > +/* Hardware access */ > +static inline void clk_write(struct unicam_device *dev, u32 val) > +{ > + writel(val | 0x5a000000, dev->clk_gate_base); > +} > + > +static inline u32 reg_read(struct unicam_device *dev, u32 offset) > +{ > + return readl(dev->base + offset); > +} > + > +static inline void reg_write(struct unicam_device *dev, u32 offset, u32 val) > +{ > + writel(val, dev->base + offset); > +} > + > +static inline int get_field(u32 value, u32 mask) > +{ > + return (value & mask) >> __ffs(mask); > +} > + > +static inline void set_field(u32 *valp, u32 field, u32 mask) > +{ > + u32 val = *valp; > + > + val &= ~mask; > + val |= (field << __ffs(mask)) & mask; > + *valp = val; > +} > + > +static inline u32 reg_read_field(struct unicam_device *dev, u32 offset, > + u32 mask) > +{ > + return get_field(reg_read(dev, offset), mask); > +} > + > +static inline void reg_write_field(struct unicam_device *dev, u32 offset, > + u32 field, u32 mask) > +{ > + u32 val = reg_read(dev, offset); > + > + set_field(&val, field, mask); > + reg_write(dev, offset, val); > +} > + > +/* Power management functions */ > +static inline int unicam_runtime_get(struct unicam_device *dev) > +{ > + return pm_runtime_get_sync(&dev->pdev->dev); > +} > + > +static inline void unicam_runtime_put(struct unicam_device *dev) > +{ > + pm_runtime_put_sync(&dev->pdev->dev); > +} > + > +/* Format setup functions */ > +static const struct unicam_fmt *find_format_by_code(u32 code) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(formats); i++) { > + if (formats[i].code == code) > + return &formats[i]; > + } > + > + return NULL; > +} > + > +static int check_mbus_format(struct unicam_device *dev, > + const struct unicam_fmt *format) > +{ > + unsigned int i; > + int ret = 0; > + > + for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) { > + struct v4l2_subdev_mbus_code_enum mbus_code = { > + .index = i, > + .pad = IMAGE_PAD, > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + }; > + > + ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, > + NULL, &mbus_code); > + > + if (!ret && mbus_code.code == format->code) > + return 1; > + } > + > + return 0; > +} > + > +static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev, > + u32 pixelformat) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(formats); i++) { > + if (formats[i].fourcc == pixelformat || > + formats[i].repacked_fourcc == pixelformat) { > + if (formats[i].check_variants && > + !check_mbus_format(dev, &formats[i])) > + continue; > + return &formats[i]; > + } > + } > + > + return NULL; > +} > + > +static inline unsigned int bytes_per_line(u32 width, I'd drop inline, there is no compelling reason for having this as an inline function IMHO. > + const struct unicam_fmt *fmt, > + u32 v4l2_fourcc) > +{ > + if (v4l2_fourcc == fmt->repacked_fourcc) > + /* Repacking always goes to 16bpp */ > + return ALIGN(width << 1, BPL_ALIGNMENT); > + else > + return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT); > +} > + > +static int __subdev_get_format(struct unicam_device *dev, > + struct v4l2_mbus_framefmt *fmt, int pad_id) > +{ > + struct v4l2_subdev_format sd_fmt = { > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + .pad = pad_id > + }; > + int ret; > + > + ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config, > + &sd_fmt); > + if (ret < 0) > + return ret; > + > + *fmt = sd_fmt.format; > + > + unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, > + fmt->width, fmt->height, fmt->code); > + > + return 0; > +} > + > +static int __subdev_set_format(struct unicam_device *dev, > + struct v4l2_mbus_framefmt *fmt, int pad_id) > +{ > + struct v4l2_subdev_format sd_fmt = { > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + .pad = pad_id > + }; > + int ret; > + > + sd_fmt.format = *fmt; > + > + ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config, > + &sd_fmt); > + if (ret < 0) > + return ret; > + > + *fmt = sd_fmt.format; > + > + if (pad_id == IMAGE_PAD) > + unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__, fmt->width, > + fmt->height, fmt->code); > + else > + unicam_dbg(1, dev, "%s Embedded data code:%04x\n", __func__, > + sd_fmt.format.code); > + > + return 0; > +} > + > +static int unicam_calc_format_size_bpl(struct unicam_device *dev, > + const struct unicam_fmt *fmt, > + struct v4l2_format *f) > +{ > + unsigned int min_bytesperline; > + > + v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2, > + &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0, > + 0); > + > + min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt, > + f->fmt.pix.pixelformat); > + > + if (f->fmt.pix.bytesperline > min_bytesperline && > + f->fmt.pix.bytesperline <= MAX_BYTESPERLINE) > + f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline, > + BPL_ALIGNMENT); > + else > + f->fmt.pix.bytesperline = min_bytesperline; > + > + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; > + > + unicam_dbg(3, dev, "%s: fourcc: %08X size: %dx%d bpl:%d img_size:%d\n", > + __func__, > + f->fmt.pix.pixelformat, > + f->fmt.pix.width, f->fmt.pix.height, > + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); > + > + return 0; > +} > + > +static int unicam_reset_format(struct unicam_node *node) > +{ > + struct unicam_device *dev = node->dev; > + struct v4l2_mbus_framefmt mbus_fmt; > + int ret; > + > + if (dev->sensor_embedded_data || node->pad_id != METADATA_PAD) { > + ret = __subdev_get_format(dev, &mbus_fmt, node->pad_id); > + if (ret) { > + unicam_err(dev, "Failed to get_format - ret %d\n", ret); > + return ret; > + } > + > + if (mbus_fmt.code != node->fmt->code) { > + unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n", > + node->fmt->code, mbus_fmt.code); > + return ret; > + } > + } > + > + if (node->pad_id == IMAGE_PAD) { > + v4l2_fill_pix_format(&node->v_fmt.fmt.pix, &mbus_fmt); > + node->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + unicam_calc_format_size_bpl(dev, node->fmt, &node->v_fmt); > + } else { > + node->v_fmt.type = V4L2_BUF_TYPE_META_CAPTURE; > + node->v_fmt.fmt.meta.dataformat = V4L2_META_FMT_SENSOR_DATA; > + if (dev->sensor_embedded_data) { > + node->v_fmt.fmt.meta.buffersize = > + mbus_fmt.width * mbus_fmt.height; > + node->embedded_lines = mbus_fmt.height; > + } else { > + node->v_fmt.fmt.meta.buffersize = UNICAM_EMBEDDED_SIZE; > + node->embedded_lines = 1; > + } > + } > + > + node->m_fmt = mbus_fmt; > + return 0; > +} > + > +static void unicam_wr_dma_addr(struct unicam_device *dev, dma_addr_t dmaaddr, > + unsigned int buffer_size, int pad_id) > +{ > + dma_addr_t endaddr = dmaaddr + buffer_size; > + > + /* > + * dmaaddr and endaddr should be a 32-bit address with the top two bits > + * set to 0x3 to signify uncached access through the Videocore memory > + * controller. > + */ > + WARN_ON((dmaaddr >> 30) != 0x3 || (endaddr >> 30) != 0x3); > + > + if (pad_id == IMAGE_PAD) { > + reg_write(dev, UNICAM_IBSA0, dmaaddr); > + reg_write(dev, UNICAM_IBEA0, endaddr); > + } else { > + reg_write(dev, UNICAM_DBSA0, dmaaddr); > + reg_write(dev, UNICAM_DBEA0, endaddr); > + } > +} > + > +static inline unsigned int unicam_get_lines_done(struct unicam_device *dev) Same here... > +{ > + dma_addr_t start_addr, cur_addr; > + unsigned int stride = dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline; > + struct unicam_buffer *frm = dev->node[IMAGE_PAD].cur_frm; > + > + if (!frm) > + return 0; > + > + start_addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0); > + cur_addr = reg_read(dev, UNICAM_IBWP); > + return (unsigned int)(cur_addr - start_addr) / stride; > +} > + > +static inline void unicam_schedule_next_buffer(struct unicam_node *node) ...and here. It's probably a good idea to scan this source for other inlines that do not make sense. > +{ > + struct unicam_device *dev = node->dev; > + struct unicam_buffer *buf; > + unsigned int size; > + dma_addr_t addr; > + > + buf = list_first_entry(&node->dma_queue, struct unicam_buffer, list); > + node->next_frm = buf; > + list_del(&buf->list); > + > + addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); > + size = (node->pad_id == IMAGE_PAD) ? > + node->v_fmt.fmt.pix.sizeimage : > + node->v_fmt.fmt.meta.buffersize; > + > + unicam_wr_dma_addr(dev, addr, size, node->pad_id); > +} > + > +static inline void unicam_schedule_dummy_buffer(struct unicam_node *node) > +{ > + struct unicam_device *dev = node->dev; > + > + unicam_dbg(3, dev, "Scheduling dummy buffer for node %d\n", > + node->pad_id); > + > + unicam_wr_dma_addr(dev, node->dummy_buf_dma_addr, DUMMY_BUF_SIZE, > + node->pad_id); > + node->next_frm = NULL; > +} > + > +static inline void unicam_process_buffer_complete(struct unicam_node *node, > + unsigned int sequence) > +{ > + node->cur_frm->vb.field = node->m_fmt.field; > + node->cur_frm->vb.sequence = sequence; > + > + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); > +} > + > +static bool unicam_all_nodes_streaming(struct unicam_device *dev) > +{ > + bool ret; > + > + ret = dev->node[IMAGE_PAD].open && dev->node[IMAGE_PAD].streaming; > + ret &= !dev->node[METADATA_PAD].open || > + dev->node[METADATA_PAD].streaming; > + return ret; It took me a while to parse this boolean expression, and I'm not sure I like the mixing of boolean with bitmasks (and in fact, I'm not 100% certain that that isn't compiler dependent!). I'd rework this a bit and add a comment. But I also noticed that this function is used in only one place, so I would move this code there instead of having this as a separate function. > +} > + > +static bool unicam_all_nodes_disabled(struct unicam_device *dev) > +{ > + return !dev->node[IMAGE_PAD].streaming && > + !dev->node[METADATA_PAD].streaming; > +} > + > +static void unicam_queue_event_sof(struct unicam_device *unicam) > +{ > + struct v4l2_event event = { > + .type = V4L2_EVENT_FRAME_SYNC, > + .u.frame_sync.frame_sequence = unicam->sequence, > + }; > + > + v4l2_event_queue(&unicam->node[IMAGE_PAD].video_dev, &event); > +} > + > +/* > + * unicam_isr : ISR handler for unicam capture > + * @irq: irq number > + * @dev_id: dev_id ptr > + * > + * It changes status of the captured buffer, takes next buffer from the queue > + * and sets its address in unicam registers > + */ > +static irqreturn_t unicam_isr(int irq, void *dev) > +{ > + struct unicam_device *unicam = dev; > + unsigned int lines_done = unicam_get_lines_done(dev); > + unsigned int sequence = unicam->sequence; > + unsigned int i; > + u32 ista, sta; > + u64 ts; > + > + /* > + * Don't service interrupts if not streaming. > + * Avoids issues if the VPU should enable the > + * peripheral without the kernel knowing (that > + * shouldn't happen, but causes issues if it does). > + */ > + if (unicam_all_nodes_disabled(unicam)) > + return IRQ_NONE; > + > + sta = reg_read(unicam, UNICAM_STA); > + /* Write value back to clear the interrupts */ > + reg_write(unicam, UNICAM_STA, sta); > + > + ista = reg_read(unicam, UNICAM_ISTA); > + /* Write value back to clear the interrupts */ > + reg_write(unicam, UNICAM_ISTA, ista); > + > + unicam_dbg(3, unicam, "ISR: ISTA: 0x%X, STA: 0x%X, sequence %d, lines done %d", > + ista, sta, sequence, lines_done); > + > + if (!(sta & (UNICAM_IS | UNICAM_PI0))) > + return IRQ_HANDLED; > + > + /* > + * We must run the frame end handler first. If we have a valid next_frm > + * and we get a simultaneout FE + FS interrupt, running the FS handler > + * first would null out the next_frm ptr and we would have lost the > + * buffer forever. > + */ > + if (ista & UNICAM_FEI || sta & UNICAM_PI0) { > + /* > + * Ensure we have swapped buffers already as we can't > + * stop the peripheral. If no buffer is available, use a > + * dummy buffer to dump out frames until we get a new buffer > + * to use. > + */ > + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { > + if (!unicam->node[i].streaming) > + continue; > + > + if (unicam->node[i].cur_frm) > + unicam_process_buffer_complete(&unicam->node[i], > + sequence); > + unicam->node[i].cur_frm = unicam->node[i].next_frm; > + } > + unicam->sequence++; > + } > + > + if (ista & UNICAM_FSI) { > + /* > + * Timestamp is to be when the first data byte was captured, > + * aka frame start. > + */ > + ts = ktime_get_ns(); > + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { > + if (!unicam->node[i].streaming) > + continue; > + > + if (unicam->node[i].cur_frm) > + unicam->node[i].cur_frm->vb.vb2_buf.timestamp = > + ts; > + /* > + * Set the next frame output to go to a dummy frame > + * if we have not managed to obtain another frame > + * from the queue. > + */ > + unicam_schedule_dummy_buffer(&unicam->node[i]); > + } > + > + unicam_queue_event_sof(unicam); > + } > + > + /* > + * Cannot swap buffer at frame end, there may be a race condition > + * where the HW does not actually swap it if the new frame has > + * already started. > + */ > + if (ista & (UNICAM_FSI | UNICAM_LCI) && !(ista & UNICAM_FEI)) { > + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { > + if (!unicam->node[i].streaming) > + continue; > + > + spin_lock(&unicam->node[i].dma_queue_lock); > + if (!list_empty(&unicam->node[i].dma_queue) && > + !unicam->node[i].next_frm) > + unicam_schedule_next_buffer(&unicam->node[i]); > + spin_unlock(&unicam->node[i].dma_queue_lock); > + } > + } > + > + if (reg_read(unicam, UNICAM_ICTL) & UNICAM_FCM) { > + /* Switch out of trigger mode if selected */ > + reg_write_field(unicam, UNICAM_ICTL, 1, UNICAM_TFC); > + reg_write_field(unicam, UNICAM_ICTL, 0, UNICAM_FCM); > + } > + return IRQ_HANDLED; > +} > + > +static int unicam_querycap(struct file *file, void *priv, > + struct v4l2_capability *cap) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver)); > + strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card)); Use strscpy. The media subsystem has settled on the use of strscpy in favor of strcpy/strlcpy/strncpy. > + > + snprintf(cap->bus_info, sizeof(cap->bus_info), > + "platform:%s", dev_name(&dev->pdev->dev)); > + > + cap->capabilities |= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE; > + > + return 0; > +} > + > +static int unicam_enum_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_fmtdesc *f) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + unsigned int index = 0; > + unsigned int i; > + int ret = 0; > + > + if (node->pad_id != IMAGE_PAD) > + return -EINVAL; > + > + for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) { > + struct v4l2_subdev_mbus_code_enum mbus_code = { > + .index = i, > + .pad = IMAGE_PAD, > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + }; > + const struct unicam_fmt *fmt; > + > + ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, > + NULL, &mbus_code); > + if (ret < 0) { > + unicam_dbg(2, dev, > + "subdev->enum_mbus_code idx %d returned %d - index invalid\n", > + i, ret); > + return -EINVAL; > + } > + > + fmt = find_format_by_code(mbus_code.code); > + if (fmt) { > + if (fmt->fourcc) { > + if (index == f->index) { > + f->pixelformat = fmt->fourcc; > + break; > + } > + index++; > + } > + if (fmt->repacked_fourcc) { > + if (index == f->index) { > + f->pixelformat = fmt->repacked_fourcc; > + break; > + } > + index++; > + } > + } > + } > + > + return 0; > +} > + > +static int unicam_g_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct v4l2_mbus_framefmt mbus_fmt = {0}; > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + const struct unicam_fmt *fmt = NULL; > + int ret; > + > + if (node->pad_id != IMAGE_PAD) > + return -EINVAL; > + > + /* > + * If a flip has occurred in the sensor, the fmt code might have > + * changed. So we will need to re-fetch the format from the subdevice. > + */ > + ret = __subdev_get_format(dev, &mbus_fmt, node->pad_id); > + if (ret) > + return -EINVAL; > + > + /* Find the V4L2 format from mbus code. We must match a known format. */ > + fmt = find_format_by_code(mbus_fmt.code); > + if (!fmt) > + return -EINVAL; > + > + node->fmt = fmt; > + node->v_fmt.fmt.pix.pixelformat = fmt->fourcc; > + *f = node->v_fmt; > + > + return 0; > +} > + > +static > +const struct unicam_fmt *get_first_supported_format(struct unicam_device *dev) Strange line break. If you need to split this in two lines, then split it after the type and function name: static const struct unicam_fmt * get_first_supported_format(struct unicam_device *dev) > +{ > + struct v4l2_subdev_mbus_code_enum mbus_code; > + const struct unicam_fmt *fmt = NULL; > + unsigned int i; > + int ret; > + > + for (i = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++i) { > + memset(&mbus_code, 0, sizeof(mbus_code)); > + mbus_code.index = i; > + mbus_code.pad = IMAGE_PAD; > + mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE; > + > + ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL, > + &mbus_code); > + if (ret < 0) { > + unicam_dbg(2, dev, > + "subdev->enum_mbus_code idx %u returned %d - continue\n", > + i, ret); > + continue; > + } > + > + unicam_dbg(2, dev, "subdev %s: code: 0x%08x idx: %u\n", > + dev->sensor->name, mbus_code.code, i); > + > + fmt = find_format_by_code(mbus_code.code); > + unicam_dbg(2, dev, "fmt 0x%08x returned as %p, V4L2 FOURCC 0x%08x, csi_dt 0x%02x\n", > + mbus_code.code, fmt, fmt ? fmt->fourcc : 0, > + fmt ? fmt->csi_dt : 0); > + if (fmt) > + return fmt; > + } > + > + return NULL; > +} > + > +static int unicam_try_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + struct v4l2_subdev_format sd_fmt = { > + .which = V4L2_SUBDEV_FORMAT_TRY, > + .pad = IMAGE_PAD > + }; > + struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format; > + const struct unicam_fmt *fmt; > + int ret; > + > + if (node->pad_id != IMAGE_PAD) > + return -EINVAL; > + > + fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat); > + if (!fmt) { > + /* > + * Pixel format not supported by unicam. Choose the first > + * supported format, and let the sensor choose something else. > + */ > + unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use first format.\n", > + f->fmt.pix.pixelformat); > + > + fmt = &formats[0]; > + f->fmt.pix.pixelformat = fmt->fourcc; > + } > + > + v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code); > + /* > + * No support for receiving interlaced video, so never > + * request it from the sensor subdev. > + */ > + mbus_fmt->field = V4L2_FIELD_NONE; > + > + ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config, > + &sd_fmt); > + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) > + return ret; > + > + if (mbus_fmt->field != V4L2_FIELD_NONE) > + unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n"); > + > + v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format); > + if (mbus_fmt->code != fmt->code) { > + /* Sensor has returned an alternate format */ > + fmt = find_format_by_code(mbus_fmt->code); > + if (!fmt) { > + /* > + * The alternate format is one unicam can't support. > + * Find the first format that is supported by both, and > + * then set that. > + */ > + fmt = get_first_supported_format(dev); > + mbus_fmt->code = fmt->code; > + > + ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, > + dev->sensor_config, &sd_fmt); > + if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) > + return ret; > + > + if (mbus_fmt->field != V4L2_FIELD_NONE) > + unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n"); > + > + v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format); > + > + if (mbus_fmt->code != fmt->code) { > + /* > + * We've set a format that the sensor reports > + * as being supported, but it refuses to set it. > + * Not much else we can do. > + * Assume that the sensor driver may accept the > + * format when it is set (rather than tried). > + */ > + unicam_err(dev, "Sensor won't accept default format, and Unicam can't support sensor default\n"); > + } > + } > + > + if (fmt->fourcc) > + f->fmt.pix.pixelformat = fmt->fourcc; > + else > + f->fmt.pix.pixelformat = fmt->repacked_fourcc; > + } > + > + return unicam_calc_format_size_bpl(dev, fmt, f); > +} > + > +static int unicam_s_fmt_vid_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + struct vb2_queue *q = &node->buffer_queue; > + struct v4l2_mbus_framefmt mbus_fmt = {0}; > + const struct unicam_fmt *fmt; > + int ret; > + > + if (vb2_is_busy(q)) > + return -EBUSY; > + > + ret = unicam_try_fmt_vid_cap(file, priv, f); > + if (ret < 0) > + return ret; > + > + fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat); > + if (!fmt) { > + /* > + * Unknown pixel format - adopt a default. > + * This shouldn't happen as try_fmt should have resolved any > + * issues first. > + */ > + fmt = get_first_supported_format(dev); > + if (!fmt) > + /* > + * It shouldn't be possible to get here with no > + * supported formats > + */ > + return -EINVAL; > + f->fmt.pix.pixelformat = fmt->fourcc; > + return -EINVAL; > + } > + > + v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code); > + > + ret = __subdev_set_format(dev, &mbus_fmt, node->pad_id); > + if (ret) { > + unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n", > + __func__, ret); > + return ret; > + } > + > + /* Just double check nothing has gone wrong */ > + if (mbus_fmt.code != fmt->code) { > + unicam_dbg(3, dev, > + "%s subdev changed format on us, this should not happen\n", > + __func__); > + return -EINVAL; > + } > + > + node->fmt = fmt; > + node->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat; > + node->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline; > + unicam_reset_format(node); > + > + unicam_dbg(3, dev, > + "%s %dx%d, mbus_fmt 0x%08X, V4L2 pix 0x%08X.\n", > + __func__, node->v_fmt.fmt.pix.width, > + node->v_fmt.fmt.pix.height, mbus_fmt.code, > + node->v_fmt.fmt.pix.pixelformat); > + > + *f = node->v_fmt; > + > + return 0; > +} > + > +static int unicam_enum_fmt_meta_cap(struct file *file, void *priv, > + struct v4l2_fmtdesc *f) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + const struct unicam_fmt *fmt; > + u32 code; > + int ret = 0; > + > + if (node->pad_id != METADATA_PAD || f->index != 0) > + return -EINVAL; > + > + if (dev->sensor_embedded_data) { > + struct v4l2_subdev_mbus_code_enum mbus_code = { > + .index = f->index, > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + .pad = METADATA_PAD, > + }; > + > + ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL, > + &mbus_code); > + if (ret < 0) { > + unicam_dbg(2, dev, > + "subdev->enum_mbus_code idx 0 returned %d - index invalid\n", > + ret); > + return -EINVAL; > + } > + > + code = mbus_code.code; > + } else { > + code = MEDIA_BUS_FMT_SENSOR_DATA; > + } > + > + fmt = find_format_by_code(code); > + if (fmt) > + f->pixelformat = fmt->fourcc; > + > + return 0; > +} > + > +static int unicam_g_fmt_meta_cap(struct file *file, void *priv, > + struct v4l2_format *f) > +{ > + struct unicam_node *node = video_drvdata(file); > + > + if (node->pad_id != METADATA_PAD) > + return -EINVAL; > + > + *f = node->v_fmt; > + > + return 0; > +} > + > +static int unicam_queue_setup(struct vb2_queue *vq, > + unsigned int *nbuffers, > + unsigned int *nplanes, > + unsigned int sizes[], > + struct device *alloc_devs[]) > +{ > + struct unicam_node *node = vb2_get_drv_priv(vq); > + struct unicam_device *dev = node->dev; > + unsigned int size = node->pad_id == IMAGE_PAD ? > + node->v_fmt.fmt.pix.sizeimage : > + node->v_fmt.fmt.meta.buffersize; > + > + if (vq->num_buffers + *nbuffers < 3) > + *nbuffers = 3 - vq->num_buffers; > + > + if (*nplanes) { > + if (sizes[0] < size) { > + unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0], > + size); > + return -EINVAL; > + } > + size = sizes[0]; > + } > + > + *nplanes = 1; > + sizes[0] = size; > + > + return 0; > +} > + > +static int unicam_buffer_prepare(struct vb2_buffer *vb) > +{ > + struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue); > + struct unicam_device *dev = node->dev; > + struct unicam_buffer *buf = to_unicam_buffer(vb); > + unsigned long size; > + > + if (WARN_ON(!node->fmt)) > + return -EINVAL; > + > + size = node->pad_id == IMAGE_PAD ? node->v_fmt.fmt.pix.sizeimage : > + node->v_fmt.fmt.meta.buffersize; > + if (vb2_plane_size(vb, 0) < size) { > + unicam_err(dev, "data will not fit into plane (%lu < %lu)\n", > + vb2_plane_size(vb, 0), size); > + return -EINVAL; > + } > + > + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); > + return 0; > +} > + > +static void unicam_buffer_queue(struct vb2_buffer *vb) > +{ > + struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue); > + struct unicam_buffer *buf = to_unicam_buffer(vb); > + unsigned long flags; > + > + spin_lock_irqsave(&node->dma_queue_lock, flags); > + list_add_tail(&buf->list, &node->dma_queue); > + spin_unlock_irqrestore(&node->dma_queue_lock, flags); > +} > + > +static void unicam_set_packing_config(struct unicam_device *dev) > +{ > + u32 pack, unpack; > + u32 val; > + > + if (dev->node[IMAGE_PAD].v_fmt.fmt.pix.pixelformat == > + dev->node[IMAGE_PAD].fmt->fourcc) { > + unpack = UNICAM_PUM_NONE; > + pack = UNICAM_PPM_NONE; > + } else { > + switch (dev->node[IMAGE_PAD].fmt->depth) { > + case 8: > + unpack = UNICAM_PUM_UNPACK8; > + break; > + case 10: > + unpack = UNICAM_PUM_UNPACK10; > + break; > + case 12: > + unpack = UNICAM_PUM_UNPACK12; > + break; > + case 14: > + unpack = UNICAM_PUM_UNPACK14; > + break; > + case 16: > + unpack = UNICAM_PUM_UNPACK16; > + break; > + default: > + unpack = UNICAM_PUM_NONE; > + break; > + } > + > + /* Repacking is always to 16bpp */ > + pack = UNICAM_PPM_PACK16; > + } > + > + val = 0; > + set_field(&val, unpack, UNICAM_PUM_MASK); > + set_field(&val, pack, UNICAM_PPM_MASK); > + reg_write(dev, UNICAM_IPIPE, val); > +} > + > +static void unicam_cfg_image_id(struct unicam_device *dev) > +{ > + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { > + /* CSI2 mode, hardcode VC 0 for now. */ > + reg_write(dev, UNICAM_IDI0, > + (0 << 6) | dev->node[IMAGE_PAD].fmt->csi_dt); > + } else { > + /* CCP2 mode */ > + reg_write(dev, UNICAM_IDI0, > + 0x80 | dev->node[IMAGE_PAD].fmt->csi_dt); > + } > +} > + > +static void unicam_enable_ed(struct unicam_device *dev) > +{ > + u32 val = reg_read(dev, UNICAM_DCS); > + > + set_field(&val, 2, UNICAM_EDL_MASK); > + /* Do not wrap at the end of the embedded data buffer */ > + set_field(&val, 0, UNICAM_DBOB); > + > + reg_write(dev, UNICAM_DCS, val); > +} > + > +static void unicam_start_rx(struct unicam_device *dev, dma_addr_t *addr) > +{ > + int line_int_freq = dev->node[IMAGE_PAD].v_fmt.fmt.pix.height >> 2; > + unsigned int size, i; > + u32 val; > + > + if (line_int_freq < 128) > + line_int_freq = 128; > + > + /* Enable lane clocks */ > + val = 1; > + for (i = 0; i < dev->active_data_lanes; i++) > + val = val << 2 | 1; > + clk_write(dev, val); > + > + /* Basic init */ > + reg_write(dev, UNICAM_CTRL, UNICAM_MEM); > + > + /* Enable analogue control, and leave in reset. */ > + val = UNICAM_AR; > + set_field(&val, 7, UNICAM_CTATADJ_MASK); > + set_field(&val, 7, UNICAM_PTATADJ_MASK); > + reg_write(dev, UNICAM_ANA, val); > + usleep_range(1000, 2000); > + > + /* Come out of reset */ > + reg_write_field(dev, UNICAM_ANA, 0, UNICAM_AR); > + > + /* Peripheral reset */ > + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPR); > + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPR); > + > + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPE); > + > + /* Enable Rx control. */ > + val = reg_read(dev, UNICAM_CTRL); > + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { > + set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK); > + set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK); > + } else { > + set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK); > + set_field(&val, dev->bus_flags, UNICAM_DCM_MASK); > + } > + /* Packet framer timeout */ > + set_field(&val, 0xf, UNICAM_PFT_MASK); > + set_field(&val, 128, UNICAM_OET_MASK); > + reg_write(dev, UNICAM_CTRL, val); > + > + reg_write(dev, UNICAM_IHWIN, 0); > + reg_write(dev, UNICAM_IVWIN, 0); > + > + /* AXI bus access QoS setup */ > + val = reg_read(dev, UNICAM_PRI); > + set_field(&val, 0, UNICAM_BL_MASK); > + set_field(&val, 0, UNICAM_BS_MASK); > + set_field(&val, 0xe, UNICAM_PP_MASK); > + set_field(&val, 8, UNICAM_NP_MASK); > + set_field(&val, 2, UNICAM_PT_MASK); > + set_field(&val, 1, UNICAM_PE); > + reg_write(dev, UNICAM_PRI, val); > + > + reg_write_field(dev, UNICAM_ANA, 0, UNICAM_DDL); > + > + /* Always start in trigger frame capture mode (UNICAM_FCM set) */ > + val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM | UNICAM_IBOB; > + set_field(&val, line_int_freq, UNICAM_LCIE_MASK); > + reg_write(dev, UNICAM_ICTL, val); > + reg_write(dev, UNICAM_STA, UNICAM_STA_MASK_ALL); > + reg_write(dev, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL); > + > + /* tclk_term_en */ > + reg_write_field(dev, UNICAM_CLT, 2, UNICAM_CLT1_MASK); > + /* tclk_settle */ > + reg_write_field(dev, UNICAM_CLT, 6, UNICAM_CLT2_MASK); > + /* td_term_en */ > + reg_write_field(dev, UNICAM_DLT, 2, UNICAM_DLT1_MASK); > + /* ths_settle */ > + reg_write_field(dev, UNICAM_DLT, 6, UNICAM_DLT2_MASK); > + /* trx_enable */ > + reg_write_field(dev, UNICAM_DLT, 0, UNICAM_DLT3_MASK); > + > + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_SOE); > + > + /* Packet compare setup - required to avoid missing frame ends */ > + val = 0; > + set_field(&val, 1, UNICAM_PCE); > + set_field(&val, 1, UNICAM_GI); > + set_field(&val, 1, UNICAM_CPH); > + set_field(&val, 0, UNICAM_PCVC_MASK); > + set_field(&val, 1, UNICAM_PCDT_MASK); > + reg_write(dev, UNICAM_CMP0, val); > + > + /* Enable clock lane and set up terminations */ > + val = 0; > + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { > + /* CSI2 */ > + set_field(&val, 1, UNICAM_CLE); > + set_field(&val, 1, UNICAM_CLLPE); > + if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { > + set_field(&val, 1, UNICAM_CLTRE); > + set_field(&val, 1, UNICAM_CLHSE); > + } > + } else { > + /* CCP2 */ > + set_field(&val, 1, UNICAM_CLE); > + set_field(&val, 1, UNICAM_CLHSE); > + set_field(&val, 1, UNICAM_CLTRE); > + } > + reg_write(dev, UNICAM_CLK, val); > + > + /* > + * Enable required data lanes with appropriate terminations. > + * The same value needs to be written to UNICAM_DATn registers for > + * the active lanes, and 0 for inactive ones. > + */ > + val = 0; > + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { > + /* CSI2 */ > + set_field(&val, 1, UNICAM_DLE); > + set_field(&val, 1, UNICAM_DLLPE); > + if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { > + set_field(&val, 1, UNICAM_DLTRE); > + set_field(&val, 1, UNICAM_DLHSE); > + } > + } else { > + /* CCP2 */ > + set_field(&val, 1, UNICAM_DLE); > + set_field(&val, 1, UNICAM_DLHSE); > + set_field(&val, 1, UNICAM_DLTRE); > + } > + reg_write(dev, UNICAM_DAT0, val); > + > + if (dev->active_data_lanes == 1) > + val = 0; > + reg_write(dev, UNICAM_DAT1, val); > + > + if (dev->max_data_lanes > 2) { > + /* > + * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the > + * instance supports more than 2 data lanes. > + */ > + if (dev->active_data_lanes == 2) > + val = 0; > + reg_write(dev, UNICAM_DAT2, val); > + > + if (dev->active_data_lanes == 3) > + val = 0; > + reg_write(dev, UNICAM_DAT3, val); > + } > + > + reg_write(dev, UNICAM_IBLS, > + dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline); > + size = dev->node[IMAGE_PAD].v_fmt.fmt.pix.sizeimage; > + unicam_wr_dma_addr(dev, addr[IMAGE_PAD], size, IMAGE_PAD); > + unicam_set_packing_config(dev); > + unicam_cfg_image_id(dev); > + > + val = reg_read(dev, UNICAM_MISC); > + set_field(&val, 1, UNICAM_FL0); > + set_field(&val, 1, UNICAM_FL1); > + reg_write(dev, UNICAM_MISC, val); > + > + if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data) { > + size = dev->node[METADATA_PAD].v_fmt.fmt.meta.buffersize; > + unicam_enable_ed(dev); > + unicam_wr_dma_addr(dev, addr[METADATA_PAD], size, METADATA_PAD); > + } > + > + /* Enable peripheral */ > + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPE); > + > + /* Load image pointers */ > + reg_write_field(dev, UNICAM_ICTL, 1, UNICAM_LIP_MASK); > + > + /* Load embedded data buffer pointers if needed */ > + if (dev->node[METADATA_PAD].streaming && dev->sensor_embedded_data) > + reg_write_field(dev, UNICAM_DCS, 1, UNICAM_LDP); > + > + /* > + * Enable trigger only for the first frame to > + * sync correctly to the FS from the source. > + */ > + reg_write_field(dev, UNICAM_ICTL, 1, UNICAM_TFC); > +} > + > +static void unicam_disable(struct unicam_device *dev) > +{ > + /* Analogue lane control disable */ > + reg_write_field(dev, UNICAM_ANA, 1, UNICAM_DDL); > + > + /* Stop the output engine */ > + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_SOE); > + > + /* Disable the data lanes. */ > + reg_write(dev, UNICAM_DAT0, 0); > + reg_write(dev, UNICAM_DAT1, 0); > + > + if (dev->max_data_lanes > 2) { > + reg_write(dev, UNICAM_DAT2, 0); > + reg_write(dev, UNICAM_DAT3, 0); > + } > + > + /* Peripheral reset */ > + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPR); > + usleep_range(50, 100); > + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPR); > + > + /* Disable peripheral */ > + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPE); > + > + /* Clear ED setup */ > + reg_write(dev, UNICAM_DCS, 0); > + > + /* Disable all lane clocks */ > + clk_write(dev, 0); > +} > + > +static void unicam_return_buffers(struct unicam_node *node) > +{ > + struct unicam_buffer *buf, *tmp; > + unsigned long flags; > + > + spin_lock_irqsave(&node->dma_queue_lock, flags); > + list_for_each_entry_safe(buf, tmp, &node->dma_queue, list) { > + list_del(&buf->list); > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); > + } > + > + if (node->cur_frm) > + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, > + VB2_BUF_STATE_ERROR); > + if (node->next_frm && node->cur_frm != node->next_frm) > + vb2_buffer_done(&node->next_frm->vb.vb2_buf, > + VB2_BUF_STATE_ERROR); > + > + node->cur_frm = NULL; > + node->next_frm = NULL; > + spin_unlock_irqrestore(&node->dma_queue_lock, flags); > +} > + > +static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count) > +{ > + struct unicam_node *node = vb2_get_drv_priv(vq); > + struct unicam_device *dev = node->dev; > + dma_addr_t buffer_addr[MAX_NODES] = { 0 }; > + unsigned long flags; > + unsigned int i; > + int ret; > + > + node->streaming = true; > + if (!unicam_all_nodes_streaming(dev)) { As suggested above, just move the actual code of that function here. It certainly makes it easier to review. > + unicam_dbg(3, dev, "Not all nodes are streaming yet."); > + return 0; > + } > + > + dev->sequence = 0; > + ret = unicam_runtime_get(dev); > + if (ret < 0) { > + unicam_dbg(3, dev, "unicam_runtime_get failed\n"); > + goto err_streaming; > + } > + > + /* > + * TODO: Retrieve the number of active data lanes from the connected > + * subdevice. > + */ > + dev->active_data_lanes = dev->max_data_lanes; > + > + ret = clk_set_rate(dev->clock, 100 * 1000 * 1000); > + if (ret) { > + unicam_err(dev, "failed to set up clock\n"); > + goto err_pm_put; > + } > + > + ret = clk_prepare_enable(dev->clock); > + if (ret) { > + unicam_err(dev, "Failed to enable CSI clock: %d\n", ret); > + goto err_pm_put; > + } > + > + for (i = 0; i < ARRAY_SIZE(dev->node); i++) { > + struct unicam_buffer *buf; > + > + if (!dev->node[i].streaming) > + continue; > + > + spin_lock_irqsave(&dev->node[i].dma_queue_lock, flags); > + buf = list_first_entry(&dev->node[i].dma_queue, > + struct unicam_buffer, list); > + dev->node[i].cur_frm = buf; > + dev->node[i].next_frm = buf; > + list_del(&buf->list); > + spin_unlock_irqrestore(&dev->node[i].dma_queue_lock, flags); > + > + buffer_addr[i] = > + vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); > + } > + > + unicam_start_rx(dev, buffer_addr); > + > + ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1); > + if (ret < 0) { > + unicam_err(dev, "stream on failed in subdev\n"); > + goto err_disable_unicam; > + } > + > + return 0; > + > +err_disable_unicam: > + unicam_disable(dev); > + clk_disable_unprepare(dev->clock); > +err_pm_put: > + unicam_runtime_put(dev); > +err_streaming: > + unicam_return_buffers(node); That function returns the buffers with state ERROR, but in start_streaming that should be state DEQUEUED. > + node->streaming = false; > + > + return ret; > +} > + > +static void unicam_stop_streaming(struct vb2_queue *vq) > +{ > + struct unicam_node *node = vb2_get_drv_priv(vq); > + struct unicam_device *dev = node->dev; > + > + node->streaming = false; > + > + if (node->pad_id == IMAGE_PAD) { > + /* > + * Stop streaming the sensor and disable the peripheral. > + * We cannot continue streaming embedded data with the > + * image pad disabled. > + */ > + if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0) > + unicam_err(dev, "stream off failed in subdev\n"); > + > + unicam_disable(dev); > + clk_disable_unprepare(dev->clock); > + unicam_runtime_put(dev); > + > + } else if (node->pad_id == METADATA_PAD) { > + /* > + * Allow the hardware to spin in the dummy buffer. > + * This is only really needed if the embedded data pad is > + * disabled before the image pad. > + */ > + unicam_wr_dma_addr(dev, node->dummy_buf_dma_addr, > + DUMMY_BUF_SIZE, METADATA_PAD); > + } > + > + /* Clear all queued buffers for the node */ > + unicam_return_buffers(node); > +} > + > +static int unicam_enum_input(struct file *file, void *priv, > + struct v4l2_input *inp) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + if (inp->index != 0) > + return -EINVAL; > + > + inp->type = V4L2_INPUT_TYPE_CAMERA; > + if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) { > + inp->capabilities = V4L2_IN_CAP_DV_TIMINGS; > + inp->std = 0; > + } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) { > + inp->capabilities = V4L2_IN_CAP_STD; > + if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std) > + < 0) Just put this in one line since this is hard to read. > + inp->std = V4L2_STD_ALL; > + } else { > + inp->capabilities = 0; > + inp->std = 0; > + } > + sprintf(inp->name, "Camera 0"); snprintf > + return 0; > +} > + > +static int unicam_g_input(struct file *file, void *priv, unsigned int *i) > +{ > + *i = 0; > + > + return 0; > +} > + > +static int unicam_s_input(struct file *file, void *priv, unsigned int i) > +{ > + /* > + * FIXME: Ideally we would like to be able to query the source > + * subdevice for information over the input connectors it supports, > + * and map that through in to a call to video_ops->s_routing. > + * There is no infrastructure support for defining that within > + * devicetree at present. Until that is implemented we can't > + * map a user physical connector number to s_routing input number. > + */ > + if (i > 0) > + return -EINVAL; > + > + return 0; > +} > + > +static int unicam_querystd(struct file *file, void *priv, > + v4l2_std_id *std) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, video, querystd, std); > +} > + > +static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, video, g_std, std); > +} > + > +static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + int ret; > + v4l2_std_id current_std; > + > + ret = v4l2_subdev_call(dev->sensor, video, g_std, ¤t_std); > + if (ret) > + return ret; > + > + if (std == current_std) > + return 0; > + > + if (vb2_is_busy(&node->buffer_queue)) > + return -EBUSY; > + > + ret = v4l2_subdev_call(dev->sensor, video, s_std, std); > + > + /* Force recomputation of bytesperline */ > + node->v_fmt.fmt.pix.bytesperline = 0; > + > + unicam_reset_format(node); > + > + return ret; > +} > + > +static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, pad, set_edid, edid); > +} > + > +static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, pad, get_edid, edid); > +} > + > +static int unicam_s_selection(struct file *file, void *priv, > + struct v4l2_selection *sel) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + struct v4l2_subdev_selection sdsel = { > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + .target = sel->target, > + .flags = sel->flags, > + .r = sel->r, > + }; > + > + return v4l2_subdev_call(dev->sensor, pad, set_selection, NULL, &sdsel); > +} > + > +static int unicam_g_selection(struct file *file, void *priv, > + struct v4l2_selection *sel) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + struct v4l2_subdev_selection sdsel = { > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + .target = sel->target, > + }; > + int ret; > + > + ret = v4l2_subdev_call(dev->sensor, pad, get_selection, NULL, &sdsel); > + if (!ret) > + sel->r = sdsel.r; > + > + return ret; > +} > + > +static int unicam_enum_framesizes(struct file *file, void *priv, > + struct v4l2_frmsizeenum *fsize) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + const struct unicam_fmt *fmt; > + struct v4l2_subdev_frame_size_enum fse; > + int ret; > + > + /* check for valid format */ > + fmt = find_format_by_pix(dev, fsize->pixel_format); > + if (!fmt) { > + unicam_dbg(3, dev, "Invalid pixel code: %x\n", > + fsize->pixel_format); > + return -EINVAL; > + } > + fse.code = fmt->code; > + > + fse.which = V4L2_SUBDEV_FORMAT_ACTIVE; > + fse.index = fsize->index; > + fse.pad = node->pad_id; > + > + ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_size, NULL, &fse); > + if (ret) > + return ret; > + > + unicam_dbg(1, dev, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n", > + __func__, fse.index, fse.code, fse.min_width, fse.max_width, > + fse.min_height, fse.max_height); > + > + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; > + fsize->discrete.width = fse.max_width; > + fsize->discrete.height = fse.max_height; > + > + return 0; > +} > + > +static int unicam_enum_frameintervals(struct file *file, void *priv, > + struct v4l2_frmivalenum *fival) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + const struct unicam_fmt *fmt; > + struct v4l2_subdev_frame_interval_enum fie = { > + .index = fival->index, > + .width = fival->width, > + .height = fival->height, > + .which = V4L2_SUBDEV_FORMAT_ACTIVE, > + }; > + int ret; > + > + fmt = find_format_by_pix(dev, fival->pixel_format); > + if (!fmt) > + return -EINVAL; > + > + fie.code = fmt->code; > + ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_interval, > + NULL, &fie); > + if (ret) > + return ret; > + > + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; > + fival->discrete = fie.interval; > + > + return 0; > +} > + > +static int unicam_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_g_parm_cap(video_devdata(file), dev->sensor, a); > +} > + > +static int unicam_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_s_parm_cap(video_devdata(file), dev->sensor, a); > +} > + > +static int unicam_g_dv_timings(struct file *file, void *priv, > + struct v4l2_dv_timings *timings) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings); > +} > + > +static int unicam_s_dv_timings(struct file *file, void *priv, > + struct v4l2_dv_timings *timings) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + struct v4l2_dv_timings current_timings; > + int ret; > + > + ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings, > + ¤t_timings); ret isn't checked! > + > + if (v4l2_match_dv_timings(timings, ¤t_timings, 0, false)) > + return 0; > + > + if (vb2_is_busy(&node->buffer_queue)) > + return -EBUSY; > + > + ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings); > + > + /* Force recomputation of bytesperline */ > + node->v_fmt.fmt.pix.bytesperline = 0; > + > + unicam_reset_format(node); > + > + return ret; > +} > + > +static int unicam_query_dv_timings(struct file *file, void *priv, > + struct v4l2_dv_timings *timings) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings); > +} > + > +static int unicam_enum_dv_timings(struct file *file, void *priv, > + struct v4l2_enum_dv_timings *timings) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings); > +} > + > +static int unicam_dv_timings_cap(struct file *file, void *priv, > + struct v4l2_dv_timings_cap *cap) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + > + return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap); > +} > + > +static int unicam_subscribe_event(struct v4l2_fh *fh, > + const struct v4l2_event_subscription *sub) > +{ > + switch (sub->type) { > + case V4L2_EVENT_FRAME_SYNC: > + return v4l2_event_subscribe(fh, sub, 2, NULL); > + case V4L2_EVENT_SOURCE_CHANGE: > + return v4l2_event_subscribe(fh, sub, 4, NULL); > + } > + > + return v4l2_ctrl_subscribe_event(fh, sub); > +} > + > +static int unicam_log_status(struct file *file, void *fh) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + u32 reg; > + > + /* status for sub devices */ > + v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status); > + > + unicam_info(dev, "-----Receiver status-----\n"); > + unicam_info(dev, "V4L2 width/height: %ux%u\n", > + node->v_fmt.fmt.pix.width, node->v_fmt.fmt.pix.height); > + unicam_info(dev, "Mediabus format: %08x\n", node->fmt->code); > + unicam_info(dev, "V4L2 format: %08x\n", > + node->v_fmt.fmt.pix.pixelformat); > + reg = reg_read(dev, UNICAM_IPIPE); > + unicam_info(dev, "Unpacking/packing: %u / %u\n", > + get_field(reg, UNICAM_PUM_MASK), > + get_field(reg, UNICAM_PPM_MASK)); > + unicam_info(dev, "----Live data----\n"); > + unicam_info(dev, "Programmed stride: %4u\n", > + reg_read(dev, UNICAM_IBLS)); > + unicam_info(dev, "Detected resolution: %ux%u\n", > + reg_read(dev, UNICAM_IHSTA), > + reg_read(dev, UNICAM_IVSTA)); > + unicam_info(dev, "Write pointer: %08x\n", > + reg_read(dev, UNICAM_IBWP)); > + > + return 0; > +} > + > +static void unicam_notify(struct v4l2_subdev *sd, > + unsigned int notification, void *arg) > +{ > + struct unicam_device *dev = to_unicam_device(sd->v4l2_dev); > + > + switch (notification) { > + case V4L2_DEVICE_NOTIFY_EVENT: > + v4l2_event_queue(&dev->node[IMAGE_PAD].video_dev, arg); > + break; > + default: > + break; > + } > +} > + > +static const struct vb2_ops unicam_video_qops = { > + .wait_prepare = vb2_ops_wait_prepare, > + .wait_finish = vb2_ops_wait_finish, > + .queue_setup = unicam_queue_setup, > + .buf_prepare = unicam_buffer_prepare, > + .buf_queue = unicam_buffer_queue, > + .start_streaming = unicam_start_streaming, > + .stop_streaming = unicam_stop_streaming, > +}; > + > +/* > + * unicam_v4l2_open : This function is based on the v4l2_fh_open helper > + * function. It has been augmented to handle sensor subdevice power management, > + */ > +static int unicam_v4l2_open(struct file *file) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + int ret; > + > + mutex_lock(&node->lock); > + > + ret = v4l2_fh_open(file); > + if (ret) { > + unicam_err(dev, "v4l2_fh_open failed\n"); > + goto unlock; > + } > + > + node->open++; > + > + if (!v4l2_fh_is_singular_file(file)) > + goto unlock; > + > + ret = v4l2_subdev_call(dev->sensor, core, s_power, 1); > + if (ret < 0 && ret != -ENOIOCTLCMD) { > + v4l2_fh_release(file); > + node->open--; > + goto unlock; > + } > + > + ret = 0; > + > +unlock: > + mutex_unlock(&node->lock); > + return ret; > +} > + > +static int unicam_v4l2_release(struct file *file) > +{ > + struct unicam_node *node = video_drvdata(file); > + struct unicam_device *dev = node->dev; > + struct v4l2_subdev *sd = dev->sensor; > + bool fh_singular; > + int ret; > + > + mutex_lock(&node->lock); > + > + fh_singular = v4l2_fh_is_singular_file(file); > + > + ret = _vb2_fop_release(file, NULL); > + > + if (fh_singular) > + v4l2_subdev_call(sd, core, s_power, 0); > + > + node->open--; > + mutex_unlock(&node->lock); > + > + return ret; > +} > + > +/* unicam capture driver file operations */ > +static const struct v4l2_file_operations unicam_fops = { > + .owner = THIS_MODULE, > + .open = unicam_v4l2_open, > + .release = unicam_v4l2_release, > + .read = vb2_fop_read, > + .poll = vb2_fop_poll, > + .unlocked_ioctl = video_ioctl2, > + .mmap = vb2_fop_mmap, > +}; > + > +/* unicam capture ioctl operations */ > +static const struct v4l2_ioctl_ops unicam_ioctl_ops = { > + .vidioc_querycap = unicam_querycap, > + .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap, > + .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap, > + .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap, > + .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap, > + > + .vidioc_enum_fmt_meta_cap = unicam_enum_fmt_meta_cap, > + .vidioc_g_fmt_meta_cap = unicam_g_fmt_meta_cap, > + .vidioc_s_fmt_meta_cap = unicam_g_fmt_meta_cap, > + .vidioc_try_fmt_meta_cap = unicam_g_fmt_meta_cap, > + > + .vidioc_enum_input = unicam_enum_input, > + .vidioc_g_input = unicam_g_input, > + .vidioc_s_input = unicam_s_input, > + > + .vidioc_querystd = unicam_querystd, > + .vidioc_s_std = unicam_s_std, > + .vidioc_g_std = unicam_g_std, > + > + .vidioc_g_edid = unicam_g_edid, > + .vidioc_s_edid = unicam_s_edid, > + > + .vidioc_enum_framesizes = unicam_enum_framesizes, > + .vidioc_enum_frameintervals = unicam_enum_frameintervals, > + > + .vidioc_g_selection = unicam_g_selection, > + .vidioc_s_selection = unicam_s_selection, > + > + .vidioc_g_parm = unicam_g_parm, > + .vidioc_s_parm = unicam_s_parm, > + > + .vidioc_s_dv_timings = unicam_s_dv_timings, > + .vidioc_g_dv_timings = unicam_g_dv_timings, > + .vidioc_query_dv_timings = unicam_query_dv_timings, > + .vidioc_enum_dv_timings = unicam_enum_dv_timings, > + .vidioc_dv_timings_cap = unicam_dv_timings_cap, > + > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > + .vidioc_querybuf = vb2_ioctl_querybuf, > + .vidioc_qbuf = vb2_ioctl_qbuf, > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > + .vidioc_expbuf = vb2_ioctl_expbuf, > + .vidioc_streamon = vb2_ioctl_streamon, > + .vidioc_streamoff = vb2_ioctl_streamoff, > + > + .vidioc_log_status = unicam_log_status, > + .vidioc_subscribe_event = unicam_subscribe_event, > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > +}; > + > +static int > +unicam_async_bound(struct v4l2_async_notifier *notifier, > + struct v4l2_subdev *subdev, > + struct v4l2_async_subdev *asd) > +{ > + struct unicam_device *unicam = to_unicam_device(notifier->v4l2_dev); > + > + if (unicam->sensor) { > + unicam_info(unicam, "Rejecting subdev %s (Already set!!)", > + subdev->name); > + return 0; > + } > + > + unicam->sensor = subdev; > + unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name); > + > + return 0; > +} > + > +static void unicam_release(struct kref *kref) > +{ > + struct unicam_device *unicam = > + container_of(kref, struct unicam_device, kref); > + > + v4l2_ctrl_handler_free(&unicam->ctrl_handler); > + media_device_cleanup(&unicam->mdev); > + > + if (unicam->sensor_config) > + v4l2_subdev_free_pad_config(unicam->sensor_config); > + > + kfree(unicam); > +} > + > +static void unicam_put(struct unicam_device *unicam) > +{ > + kref_put(&unicam->kref, unicam_release); > +} > + > +static void unicam_get(struct unicam_device *unicam) > +{ > + kref_get(&unicam->kref); > +} > + > +static void unicam_node_release(struct video_device *vdev) > +{ > + struct unicam_node *node = video_get_drvdata(vdev); > + > + unicam_put(node->dev); > +} > + > +static int register_node(struct unicam_device *unicam, struct unicam_node *node, > + enum v4l2_buf_type type, int pad_id) > +{ > + struct video_device *vdev; > + struct vb2_queue *q; > + struct v4l2_mbus_framefmt mbus_fmt = {0}; > + const struct unicam_fmt *fmt; > + int ret; > + > + if (pad_id == IMAGE_PAD) { > + ret = __subdev_get_format(unicam, &mbus_fmt, pad_id); > + if (ret) { > + unicam_err(unicam, "Failed to get_format - ret %d\n", > + ret); > + return ret; > + } > + > + fmt = find_format_by_code(mbus_fmt.code); > + if (!fmt) { > + /* > + * Find the first format that the sensor and unicam both > + * support > + */ > + fmt = get_first_supported_format(unicam); > + > + if (!fmt) > + /* No compatible formats */ > + return -EINVAL; > + > + mbus_fmt.code = fmt->code; > + ret = __subdev_set_format(unicam, &mbus_fmt, pad_id); > + if (ret) > + return -EINVAL; > + } > + if (mbus_fmt.field != V4L2_FIELD_NONE) { > + /* Interlaced not supported - disable it now. */ > + mbus_fmt.field = V4L2_FIELD_NONE; > + ret = __subdev_set_format(unicam, &mbus_fmt, pad_id); > + if (ret) > + return -EINVAL; > + } > + > + node->v_fmt.fmt.pix.pixelformat = fmt->fourcc ? fmt->fourcc > + : fmt->repacked_fourcc; > + } else { > + /* Fix this node format as embedded data. */ > + fmt = find_format_by_code(MEDIA_BUS_FMT_SENSOR_DATA); > + node->v_fmt.fmt.meta.dataformat = fmt->fourcc; > + } > + > + node->dev = unicam; > + node->pad_id = pad_id; > + node->fmt = fmt; > + > + /* Read current subdev format */ > + unicam_reset_format(node); > + > + if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) { > + v4l2_std_id tvnorms; > + > + if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video, > + g_tvnorms))) > + /* > + * Subdevice should not advertise s_std but not > + * g_tvnorms > + */ > + return -EINVAL; > + > + ret = v4l2_subdev_call(unicam->sensor, video, > + g_tvnorms, &tvnorms); > + if (WARN_ON(ret)) > + return -EINVAL; > + node->video_dev.tvnorms |= tvnorms; > + } > + > + spin_lock_init(&node->dma_queue_lock); > + mutex_init(&node->lock); > + > + vdev = &node->video_dev; > + if (pad_id == IMAGE_PAD) { > + /* Add controls from the subdevice */ > + ret = v4l2_ctrl_add_handler(&unicam->ctrl_handler, > + unicam->sensor->ctrl_handler, NULL, > + true); > + if (ret < 0) > + return ret; > + > + /* > + * If the sensor subdevice has any controls, associate the node > + * with the ctrl handler to allow access from userland. > + */ > + if (!list_empty(&unicam->ctrl_handler.ctrls)) > + vdev->ctrl_handler = &unicam->ctrl_handler; > + } > + > + q = &node->buffer_queue; > + q->type = type; > + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; > + q->drv_priv = node; > + q->ops = &unicam_video_qops; > + q->mem_ops = &vb2_dma_contig_memops; > + q->buf_struct_size = sizeof(struct unicam_buffer); > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > + q->lock = &node->lock; > + q->min_buffers_needed = 2; > + q->dev = &unicam->pdev->dev; > + > + ret = vb2_queue_init(q); > + if (ret) { > + unicam_err(unicam, "vb2_queue_init() failed\n"); > + return ret; > + } > + > + INIT_LIST_HEAD(&node->dma_queue); > + > + vdev->release = unicam_node_release; > + vdev->fops = &unicam_fops; > + vdev->ioctl_ops = &unicam_ioctl_ops; > + vdev->v4l2_dev = &unicam->v4l2_dev; > + vdev->vfl_dir = VFL_DIR_RX; > + vdev->queue = q; > + vdev->lock = &node->lock; > + vdev->device_caps = (pad_id == IMAGE_PAD) ? > + (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING) : > + (V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING); > + > + /* Define the device names */ > + snprintf(vdev->name, sizeof(vdev->name), "%s-%s", UNICAM_MODULE_NAME, > + pad_id == IMAGE_PAD ? "image" : "embedded"); > + > + video_set_drvdata(vdev, node); > + if (pad_id == IMAGE_PAD) > + vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; > + node->pad.flags = MEDIA_PAD_FL_SINK; > + media_entity_pads_init(&vdev->entity, 1, &node->pad); > + > + node->dummy_buf_cpu_addr = dma_alloc_coherent(&unicam->pdev->dev, > + DUMMY_BUF_SIZE, > + &node->dummy_buf_dma_addr, > + GFP_KERNEL); > + if (!node->dummy_buf_cpu_addr) { > + unicam_err(unicam, "Unable to allocate dummy buffer.\n"); > + return -ENOMEM; > + } > + > + if (pad_id == METADATA_PAD) { > + v4l2_disable_ioctl(vdev, VIDIOC_DQEVENT); > + v4l2_disable_ioctl(vdev, VIDIOC_SUBSCRIBE_EVENT); > + v4l2_disable_ioctl(vdev, VIDIOC_UNSUBSCRIBE_EVENT); Why? > + } > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, video, s_std)) { > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_STD); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_STD); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUMSTD); > + } > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, video, querystd)) > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_QUERYSTD); > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) { > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_EDID); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_EDID); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_DV_TIMINGS_CAP); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_DV_TIMINGS); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_DV_TIMINGS); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_DV_TIMINGS); > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_QUERY_DV_TIMINGS); > + } > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_interval)) > + v4l2_disable_ioctl(&node->video_dev, > + VIDIOC_ENUM_FRAMEINTERVALS); > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, video, g_frame_interval)) > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_PARM); > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, video, s_frame_interval)) > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_PARM); > + > + if (pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_size)) > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_FRAMESIZES); > + > + if (node->pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, pad, set_selection)) > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_SELECTION); > + > + if (node->pad_id == METADATA_PAD || > + !v4l2_subdev_has_op(unicam->sensor, pad, get_selection)) > + v4l2_disable_ioctl(&node->video_dev, VIDIOC_G_SELECTION); Some of these are probably no longer needed since the v4l2 core will disable them for you. > + > + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); > + if (ret) { > + unicam_err(unicam, "Unable to register video device %s\n", > + vdev->name); > + return ret; > + } > + > + /* > + * Acquire a reference to unicam, which will be released when the video > + * device will be unregistered and userspace will have closed all open > + * file handles. > + */ > + unicam_get(unicam); > + node->registered = true; > + > + if (pad_id != METADATA_PAD || unicam->sensor_embedded_data) { > + ret = media_create_pad_link(&unicam->sensor->entity, pad_id, > + &node->video_dev.entity, 0, > + MEDIA_LNK_FL_ENABLED | > + MEDIA_LNK_FL_IMMUTABLE); > + if (ret) > + unicam_err(unicam, "Unable to create pad link for %s\n", > + vdev->name); > + } > + > + return ret; > +} > + > +static void unregister_nodes(struct unicam_device *unicam) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { > + struct unicam_node *node = &unicam->node[i]; > + > + if (node->dummy_buf_cpu_addr) { > + dma_free_coherent(&unicam->pdev->dev, DUMMY_BUF_SIZE, > + node->dummy_buf_cpu_addr, > + node->dummy_buf_dma_addr); > + } > + > + if (node->registered) { > + node->registered = false; > + video_unregister_device(&node->video_dev); > + } > + } > +} > + > +static int unicam_probe_complete(struct unicam_device *unicam) > +{ > + int ret; > + > + unicam->v4l2_dev.notify = unicam_notify; > + > + unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor); > + if (!unicam->sensor_config) > + return -ENOMEM; > + > + unicam->sensor_embedded_data = (unicam->sensor->entity.num_pads >= 2); > + > + ret = register_node(unicam, &unicam->node[IMAGE_PAD], > + V4L2_BUF_TYPE_VIDEO_CAPTURE, IMAGE_PAD); > + if (ret) { > + unicam_err(unicam, "Unable to register image video device.\n"); > + goto unregister; > + } > + > + ret = register_node(unicam, &unicam->node[METADATA_PAD], > + V4L2_BUF_TYPE_META_CAPTURE, METADATA_PAD); > + if (ret) { > + unicam_err(unicam, "Unable to register metadata video device.\n"); > + goto unregister; > + } > + > + ret = v4l2_device_register_ro_subdev_nodes(&unicam->v4l2_dev); > + if (ret) { > + unicam_err(unicam, "Unable to register subdev nodes.\n"); > + goto unregister; > + } > + > + /* > + * Release the initial reference, all references are now owned by the > + * video devices. > + */ > + unicam_put(unicam); > + return 0; > + > +unregister: > + unregister_nodes(unicam); > + unicam_put(unicam); > + > + return ret; > +} > + > +static int unicam_async_complete(struct v4l2_async_notifier *notifier) > +{ > + struct unicam_device *unicam = to_unicam_device(notifier->v4l2_dev); > + > + return unicam_probe_complete(unicam); > +} > + > +static const struct v4l2_async_notifier_operations unicam_async_ops = { > + .bound = unicam_async_bound, > + .complete = unicam_async_complete, > +}; > + > +static int of_unicam_connect_subdevs(struct unicam_device *dev) > +{ > + struct platform_device *pdev = dev->pdev; > + struct v4l2_fwnode_endpoint ep = { 0 }; > + struct device_node *ep_node; > + struct device_node *sensor_node; > + unsigned int lane; > + int ret = -EINVAL; > + > + if (of_property_read_u32(pdev->dev.of_node, "brcm,num-data-lanes", > + &dev->max_data_lanes) < 0) { > + unicam_err(dev, "number of data lanes not set\n"); > + return -EINVAL; > + } > + > + /* Get the local endpoint and remote device. */ > + ep_node = of_graph_get_next_endpoint(pdev->dev.of_node, NULL); > + if (!ep_node) { > + unicam_dbg(3, dev, "can't get next endpoint\n"); > + return -EINVAL; > + } > + > + unicam_dbg(3, dev, "ep_node is %pOF\n", ep_node); > + > + sensor_node = of_graph_get_remote_port_parent(ep_node); > + if (!sensor_node) { > + unicam_dbg(3, dev, "can't get remote parent\n"); > + goto cleanup_exit; > + } > + > + unicam_dbg(1, dev, "found subdevice %pOF\n", sensor_node); > + > + /* Parse the local endpoint and validate its configuration. */ > + v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep); > + > + unicam_dbg(3, dev, "parsed local endpoint, bus_type %u\n", > + ep.bus_type); > + > + dev->bus_type = ep.bus_type; > + > + switch (ep.bus_type) { > + case V4L2_MBUS_CSI2_DPHY: > + switch (ep.bus.mipi_csi2.num_data_lanes) { > + case 1: > + case 2: > + case 4: > + break; > + > + default: > + unicam_err(dev, "subdevice %pOF: %u data lanes not supported\n", > + sensor_node, > + ep.bus.mipi_csi2.num_data_lanes); > + goto cleanup_exit; > + } > + > + for (lane = 0; lane < ep.bus.mipi_csi2.num_data_lanes; lane++) { > + if (ep.bus.mipi_csi2.data_lanes[lane] != lane + 1) { > + unicam_err(dev, "subdevice %pOF: data lanes reordering not supported\n", > + sensor_node); > + goto cleanup_exit; > + } > + } > + > + if (ep.bus.mipi_csi2.num_data_lanes > dev->max_data_lanes) { > + unicam_err(dev, "subdevice requires %u data lanes when %u are supported\n", > + ep.bus.mipi_csi2.num_data_lanes, > + dev->max_data_lanes); > + } > + > + dev->max_data_lanes = ep.bus.mipi_csi2.num_data_lanes; > + dev->bus_flags = ep.bus.mipi_csi2.flags; > + > + break; > + > + case V4L2_MBUS_CCP2: > + if (ep.bus.mipi_csi1.clock_lane != 0 || > + ep.bus.mipi_csi1.data_lane != 1) { > + unicam_err(dev, "subdevice %pOF: unsupported lanes configuration\n", > + sensor_node); > + goto cleanup_exit; > + } > + > + dev->max_data_lanes = 1; > + dev->bus_flags = ep.bus.mipi_csi1.strobe; > + break; > + > + default: > + /* Unsupported bus type */ > + unicam_err(dev, "subdevice %pOF: unsupported bus type %u\n", > + sensor_node, ep.bus_type); > + goto cleanup_exit; > + } > + > + unicam_dbg(3, dev, "subdevice %pOF: %s bus, %u data lanes, flags=0x%08x\n", > + sensor_node, > + dev->bus_type == V4L2_MBUS_CSI2_DPHY ? "CSI-2" : "CCP2", > + dev->max_data_lanes, dev->bus_flags); > + > + /* Initialize and register the async notifier. */ > + v4l2_async_notifier_init(&dev->notifier); > + dev->notifier.ops = &unicam_async_ops; > + > + dev->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; > + dev->asd.match.fwnode = of_fwnode_handle(sensor_node); > + ret = v4l2_async_notifier_add_subdev(&dev->notifier, &dev->asd); > + if (ret) { > + unicam_err(dev, "Error adding subdevice: %d\n", ret); > + goto cleanup_exit; > + } > + > + ret = v4l2_async_notifier_register(&dev->v4l2_dev, &dev->notifier); > + if (ret) { > + unicam_err(dev, "Error registering async notifier: %d\n", ret); > + ret = -EINVAL; > + } > + > +cleanup_exit: > + of_node_put(sensor_node); > + of_node_put(ep_node); > + > + return ret; > +} > + > +static int unicam_probe(struct platform_device *pdev) > +{ > + struct unicam_device *unicam; > + int ret; > + > + unicam = kzalloc(sizeof(*unicam), GFP_KERNEL); > + if (!unicam) > + return -ENOMEM; > + > + kref_init(&unicam->kref); > + unicam->pdev = pdev; > + > + unicam->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(unicam->base)) { > + unicam_err(unicam, "Failed to get main io block\n"); > + ret = PTR_ERR(unicam->base); > + goto err_unicam_put; > + } > + > + unicam->clk_gate_base = devm_platform_ioremap_resource(pdev, 1); > + if (IS_ERR(unicam->clk_gate_base)) { > + unicam_err(unicam, "Failed to get 2nd io block\n"); > + ret = PTR_ERR(unicam->clk_gate_base); > + goto err_unicam_put; > + } > + > + unicam->clock = devm_clk_get(&pdev->dev, "lp"); > + if (IS_ERR(unicam->clock)) { > + unicam_err(unicam, "Failed to get clock\n"); > + ret = PTR_ERR(unicam->clock); > + goto err_unicam_put; > + } > + > + ret = platform_get_irq(pdev, 0); > + if (ret <= 0) { > + dev_err(&pdev->dev, "No IRQ resource\n"); > + ret = -EINVAL; > + goto err_unicam_put; > + } > + > + ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0, > + "unicam_capture0", unicam); > + if (ret) { > + dev_err(&pdev->dev, "Unable to request interrupt\n"); > + ret = -EINVAL; > + goto err_unicam_put; > + } > + > + unicam->mdev.dev = &pdev->dev; > + strscpy(unicam->mdev.model, UNICAM_MODULE_NAME, > + sizeof(unicam->mdev.model)); > + strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial)); > + snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info), > + "platform:%s", dev_name(&pdev->dev)); > + unicam->mdev.hw_revision = 0; > + > + media_device_init(&unicam->mdev); > + > + unicam->v4l2_dev.mdev = &unicam->mdev; > + > + ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); > + if (ret) { > + unicam_err(unicam, > + "Unable to register v4l2 device.\n"); > + goto err_unicam_put; > + } > + > + ret = media_device_register(&unicam->mdev); > + if (ret < 0) { > + unicam_err(unicam, > + "Unable to register media-controller device.\n"); > + goto err_v4l2_unregister; > + } > + > + /* Reserve space for the controls */ > + ret = v4l2_ctrl_handler_init(&unicam->ctrl_handler, 16); > + if (ret < 0) > + goto err_media_unregister; > + > + /* set the driver data in platform device */ > + platform_set_drvdata(pdev, unicam); > + > + ret = of_unicam_connect_subdevs(unicam); > + if (ret) { > + dev_err(&pdev->dev, "Failed to connect subdevs\n"); > + goto err_media_unregister; > + } > + > + /* Enable the block power domain */ > + pm_runtime_enable(&pdev->dev); > + > + return 0; > + > +err_media_unregister: > + media_device_unregister(&unicam->mdev); > +err_v4l2_unregister: > + v4l2_device_unregister(&unicam->v4l2_dev); > +err_unicam_put: > + unicam_put(unicam); > + > + return ret; > +} > + > +static int unicam_remove(struct platform_device *pdev) > +{ > + struct unicam_device *unicam = platform_get_drvdata(pdev); > + > + unicam_dbg(2, unicam, "%s\n", __func__); > + > + v4l2_async_notifier_unregister(&unicam->notifier); > + v4l2_device_unregister(&unicam->v4l2_dev); > + media_device_unregister(&unicam->mdev); > + unregister_nodes(unicam); > + > + pm_runtime_disable(&pdev->dev); > + > + return 0; > +} > + > +static const struct of_device_id unicam_of_match[] = { > + { .compatible = "brcm,bcm2835-unicam", }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, unicam_of_match); > + > +static struct platform_driver unicam_driver = { > + .probe = unicam_probe, > + .remove = unicam_remove, > + .driver = { > + .name = UNICAM_MODULE_NAME, > + .of_match_table = of_match_ptr(unicam_of_match), > + }, > +}; > + > +module_platform_driver(unicam_driver); > + > +MODULE_AUTHOR("Dave Stevenson "); > +MODULE_DESCRIPTION("BCM2835 Unicam driver"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION(UNICAM_VERSION); > diff --git a/drivers/media/platform/bcm2835/vc4-regs-unicam.h b/drivers/media/platform/bcm2835/vc4-regs-unicam.h > new file mode 100644 > index 000000000000..ae059a171d0f > --- /dev/null > +++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h > @@ -0,0 +1,253 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > + > +/* > + * Copyright (C) 2017-2020 Raspberry Pi Trading. > + * Dave Stevenson > + */ > + > +#ifndef VC4_REGS_UNICAM_H > +#define VC4_REGS_UNICAM_H > + > +/* > + * The following values are taken from files found within the code drop > + * made by Broadcom for the BCM21553 Graphics Driver, predominantly in > + * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h. > + * They have been modified to be only the register offset. > + */ > +#define UNICAM_CTRL 0x000 > +#define UNICAM_STA 0x004 > +#define UNICAM_ANA 0x008 > +#define UNICAM_PRI 0x00c > +#define UNICAM_CLK 0x010 > +#define UNICAM_CLT 0x014 > +#define UNICAM_DAT0 0x018 > +#define UNICAM_DAT1 0x01c > +#define UNICAM_DAT2 0x020 > +#define UNICAM_DAT3 0x024 > +#define UNICAM_DLT 0x028 > +#define UNICAM_CMP0 0x02c > +#define UNICAM_CMP1 0x030 > +#define UNICAM_CAP0 0x034 > +#define UNICAM_CAP1 0x038 > +#define UNICAM_ICTL 0x100 > +#define UNICAM_ISTA 0x104 > +#define UNICAM_IDI0 0x108 > +#define UNICAM_IPIPE 0x10c > +#define UNICAM_IBSA0 0x110 > +#define UNICAM_IBEA0 0x114 > +#define UNICAM_IBLS 0x118 > +#define UNICAM_IBWP 0x11c > +#define UNICAM_IHWIN 0x120 > +#define UNICAM_IHSTA 0x124 > +#define UNICAM_IVWIN 0x128 > +#define UNICAM_IVSTA 0x12c > +#define UNICAM_ICC 0x130 > +#define UNICAM_ICS 0x134 > +#define UNICAM_IDC 0x138 > +#define UNICAM_IDPO 0x13c > +#define UNICAM_IDCA 0x140 > +#define UNICAM_IDCD 0x144 > +#define UNICAM_IDS 0x148 > +#define UNICAM_DCS 0x200 > +#define UNICAM_DBSA0 0x204 > +#define UNICAM_DBEA0 0x208 > +#define UNICAM_DBWP 0x20c > +#define UNICAM_DBCTL 0x300 > +#define UNICAM_IBSA1 0x304 > +#define UNICAM_IBEA1 0x308 > +#define UNICAM_IDI1 0x30c > +#define UNICAM_DBSA1 0x310 > +#define UNICAM_DBEA1 0x314 > +#define UNICAM_MISC 0x400 > + > +/* > + * The following bitmasks are from the kernel released by Broadcom > + * for Android - https://android.googlesource.com/kernel/bcm/ > + * The Rhea, Hawaii, and Java chips all contain the same VideoCore4 > + * Unicam block as BCM2835, as defined in eg > + * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar. > + * Values reworked to use the kernel BIT and GENMASK macros. > + * > + * Some of the bit mnenomics have been amended to match the datasheet. > + */ > +/* UNICAM_CTRL Register */ > +#define UNICAM_CPE BIT(0) > +#define UNICAM_MEM BIT(1) > +#define UNICAM_CPR BIT(2) > +#define UNICAM_CPM_MASK GENMASK(3, 3) > +#define UNICAM_CPM_CSI2 0 > +#define UNICAM_CPM_CCP2 1 > +#define UNICAM_SOE BIT(4) > +#define UNICAM_DCM_MASK GENMASK(5, 5) > +#define UNICAM_DCM_STROBE 0 > +#define UNICAM_DCM_DATA 1 > +#define UNICAM_SLS BIT(6) > +#define UNICAM_PFT_MASK GENMASK(11, 8) > +#define UNICAM_OET_MASK GENMASK(20, 12) > + > +/* UNICAM_STA Register */ > +#define UNICAM_SYN BIT(0) > +#define UNICAM_CS BIT(1) > +#define UNICAM_SBE BIT(2) > +#define UNICAM_PBE BIT(3) > +#define UNICAM_HOE BIT(4) > +#define UNICAM_PLE BIT(5) > +#define UNICAM_SSC BIT(6) > +#define UNICAM_CRCE BIT(7) > +#define UNICAM_OES BIT(8) > +#define UNICAM_IFO BIT(9) > +#define UNICAM_OFO BIT(10) > +#define UNICAM_BFO BIT(11) > +#define UNICAM_DL BIT(12) > +#define UNICAM_PS BIT(13) > +#define UNICAM_IS BIT(14) > +#define UNICAM_PI0 BIT(15) > +#define UNICAM_PI1 BIT(16) > +#define UNICAM_FSI_S BIT(17) > +#define UNICAM_FEI_S BIT(18) > +#define UNICAM_LCI_S BIT(19) > +#define UNICAM_BUF0_RDY BIT(20) > +#define UNICAM_BUF0_NO BIT(21) > +#define UNICAM_BUF1_RDY BIT(22) > +#define UNICAM_BUF1_NO BIT(23) > +#define UNICAM_DI BIT(24) > + > +#define UNICAM_STA_MASK_ALL \ > + (UNICAM_DL + \ > + UNICAM_SBE + \ > + UNICAM_PBE + \ > + UNICAM_HOE + \ > + UNICAM_PLE + \ > + UNICAM_SSC + \ > + UNICAM_CRCE + \ > + UNICAM_IFO + \ > + UNICAM_OFO + \ > + UNICAM_PS + \ > + UNICAM_PI0 + \ > + UNICAM_PI1) > + > +/* UNICAM_ANA Register */ > +#define UNICAM_APD BIT(0) > +#define UNICAM_BPD BIT(1) > +#define UNICAM_AR BIT(2) > +#define UNICAM_DDL BIT(3) > +#define UNICAM_CTATADJ_MASK GENMASK(7, 4) > +#define UNICAM_PTATADJ_MASK GENMASK(11, 8) > + > +/* UNICAM_PRI Register */ > +#define UNICAM_PE BIT(0) > +#define UNICAM_PT_MASK GENMASK(2, 1) > +#define UNICAM_NP_MASK GENMASK(7, 4) > +#define UNICAM_PP_MASK GENMASK(11, 8) > +#define UNICAM_BS_MASK GENMASK(15, 12) > +#define UNICAM_BL_MASK GENMASK(17, 16) > + > +/* UNICAM_CLK Register */ > +#define UNICAM_CLE BIT(0) > +#define UNICAM_CLPD BIT(1) > +#define UNICAM_CLLPE BIT(2) > +#define UNICAM_CLHSE BIT(3) > +#define UNICAM_CLTRE BIT(4) > +#define UNICAM_CLAC_MASK GENMASK(8, 5) > +#define UNICAM_CLSTE BIT(29) > + > +/* UNICAM_CLT Register */ > +#define UNICAM_CLT1_MASK GENMASK(7, 0) > +#define UNICAM_CLT2_MASK GENMASK(15, 8) > + > +/* UNICAM_DATn Registers */ > +#define UNICAM_DLE BIT(0) > +#define UNICAM_DLPD BIT(1) > +#define UNICAM_DLLPE BIT(2) > +#define UNICAM_DLHSE BIT(3) > +#define UNICAM_DLTRE BIT(4) > +#define UNICAM_DLSM BIT(5) > +#define UNICAM_DLFO BIT(28) > +#define UNICAM_DLSTE BIT(29) > + > +#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO) > + > +/* UNICAM_DLT Register */ > +#define UNICAM_DLT1_MASK GENMASK(7, 0) > +#define UNICAM_DLT2_MASK GENMASK(15, 8) > +#define UNICAM_DLT3_MASK GENMASK(23, 16) > + > +/* UNICAM_ICTL Register */ > +#define UNICAM_FSIE BIT(0) > +#define UNICAM_FEIE BIT(1) > +#define UNICAM_IBOB BIT(2) > +#define UNICAM_FCM BIT(3) > +#define UNICAM_TFC BIT(4) > +#define UNICAM_LIP_MASK GENMASK(6, 5) > +#define UNICAM_LCIE_MASK GENMASK(28, 16) > + > +/* UNICAM_IDI0/1 Register */ > +#define UNICAM_ID0_MASK GENMASK(7, 0) > +#define UNICAM_ID1_MASK GENMASK(15, 8) > +#define UNICAM_ID2_MASK GENMASK(23, 16) > +#define UNICAM_ID3_MASK GENMASK(31, 24) > + > +/* UNICAM_ISTA Register */ > +#define UNICAM_FSI BIT(0) > +#define UNICAM_FEI BIT(1) > +#define UNICAM_LCI BIT(2) > + > +#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI) > + > +/* UNICAM_IPIPE Register */ > +#define UNICAM_PUM_MASK GENMASK(2, 0) > + /* Unpacking modes */ > + #define UNICAM_PUM_NONE 0 > + #define UNICAM_PUM_UNPACK6 1 > + #define UNICAM_PUM_UNPACK7 2 > + #define UNICAM_PUM_UNPACK8 3 > + #define UNICAM_PUM_UNPACK10 4 > + #define UNICAM_PUM_UNPACK12 5 > + #define UNICAM_PUM_UNPACK14 6 > + #define UNICAM_PUM_UNPACK16 7 > +#define UNICAM_DDM_MASK GENMASK(6, 3) > +#define UNICAM_PPM_MASK GENMASK(9, 7) > + /* Packing modes */ > + #define UNICAM_PPM_NONE 0 > + #define UNICAM_PPM_PACK8 1 > + #define UNICAM_PPM_PACK10 2 > + #define UNICAM_PPM_PACK12 3 > + #define UNICAM_PPM_PACK14 4 > + #define UNICAM_PPM_PACK16 5 > +#define UNICAM_DEM_MASK GENMASK(11, 10) > +#define UNICAM_DEBL_MASK GENMASK(14, 12) > +#define UNICAM_ICM_MASK GENMASK(16, 15) > +#define UNICAM_IDM_MASK GENMASK(17, 17) > + > +/* UNICAM_ICC Register */ > +#define UNICAM_ICFL_MASK GENMASK(4, 0) > +#define UNICAM_ICFH_MASK GENMASK(9, 5) > +#define UNICAM_ICST_MASK GENMASK(12, 10) > +#define UNICAM_ICLT_MASK GENMASK(15, 13) > +#define UNICAM_ICLL_MASK GENMASK(31, 16) > + > +/* UNICAM_DCS Register */ > +#define UNICAM_DIE BIT(0) > +#define UNICAM_DIM BIT(1) > +#define UNICAM_DBOB BIT(3) > +#define UNICAM_FDE BIT(4) > +#define UNICAM_LDP BIT(5) > +#define UNICAM_EDL_MASK GENMASK(15, 8) > + > +/* UNICAM_DBCTL Register */ > +#define UNICAM_DBEN BIT(0) > +#define UNICAM_BUF0_IE BIT(1) > +#define UNICAM_BUF1_IE BIT(2) > + > +/* UNICAM_CMP[0,1] register */ > +#define UNICAM_PCE BIT(31) > +#define UNICAM_GI BIT(9) > +#define UNICAM_CPH BIT(8) > +#define UNICAM_PCVC_MASK GENMASK(7, 6) > +#define UNICAM_PCDT_MASK GENMASK(5, 0) > + > +/* UNICAM_MISC register */ > +#define UNICAM_FL0 BIT(6) > +#define UNICAM_FL1 BIT(9) > + > +#endif > Regards, Hans