From: Nicolas Dufresne <nicolas@ndufresne.ca>
To: Ezequiel Garcia <ezequiel@collabora.com>, linux-media@vger.kernel.org
Cc: Hans Verkuil <hans.verkuil@cisco.com>,
kernel@collabora.com, Alexandre Courbot <acourbot@chromium.org>,
Tomasz Figa <tfiga@chromium.org>,
Pawel Osciak <posciak@chromium.org>
Subject: Re: [RFC] media: uapi: Add VP8 low-level decoder API compound controls.
Date: Thu, 16 May 2019 14:11:12 -0400 [thread overview]
Message-ID: <6001c071ef37674442cf991760b222b19e2e3459.camel@ndufresne.ca> (raw)
In-Reply-To: <20190213211557.17696-1-ezequiel@collabora.com>
[-- Attachment #1: Type: text/plain, Size: 8655 bytes --]
Le mercredi 13 février 2019 à 18:15 -0300, Ezequiel Garcia a écrit :
> From: Pawel Osciak <posciak@chromium.org>
>
> These controls are to be used with the new low-level decoder API for VP8
> to provide additional parameters for the hardware that cannot parse the
> input stream.
>
> Signed-off-by: Pawel Osciak <posciak@chromium.org>
> [ezequiel: rebased]
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> ---
> As the H.264 interface is hopefully close to be merged,
> I'm sending the VP8 interface to start this discussion.
>
> drivers/media/v4l2-core/v4l2-ctrls.c | 7 ++
> drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> include/media/v4l2-ctrls.h | 3 +
> include/media/vp8-ctrls.h | 104 +++++++++++++++++++++++++++
> include/uapi/linux/videodev2.h | 1 +
> 5 files changed, 116 insertions(+)
> create mode 100644 include/media/vp8-ctrls.h
>
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> index 366200d31bc0..c77a56c3e2aa 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -869,6 +869,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> case V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP: return "VPX P-Frame QP Value";
> case V4L2_CID_MPEG_VIDEO_VP8_PROFILE: return "VP8 Profile";
> case V4L2_CID_MPEG_VIDEO_VP9_PROFILE: return "VP9 Profile";
> + case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HDR: return "VP8 Frame Header";
>
> /* HEVC controls */
> case V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP: return "HEVC I-Frame QP Value";
> @@ -1323,6 +1324,9 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:
> *type = V4L2_CTRL_TYPE_H264_DECODE_PARAMS;
> break;
> + case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HDR:
> + *type = V4L2_CTRL_TYPE_VP8_FRAME_HDR;
> + break;
> default:
> *type = V4L2_CTRL_TYPE_INTEGER;
> break;
> @@ -1694,6 +1698,7 @@ static int std_validate(const struct v4l2_ctrl *ctrl, u32 idx,
> case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
> case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
> case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
> + case V4L2_CTRL_TYPE_VP8_FRAME_HDR:
> return 0;
>
> default:
> @@ -2290,6 +2295,8 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
> break;
> case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
> elem_size = sizeof(struct v4l2_ctrl_h264_decode_param);
> + case V4L2_CTRL_TYPE_VP8_FRAME_HDR:
> + elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header);
> break;
> default:
> if (type < V4L2_CTRL_COMPOUND_TYPES)
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index c765c7c7c562..ea295aa9d0b6 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1324,6 +1324,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> case V4L2_PIX_FMT_VC1_ANNEX_G: descr = "VC-1 (SMPTE 412M Annex G)"; break;
> case V4L2_PIX_FMT_VC1_ANNEX_L: descr = "VC-1 (SMPTE 412M Annex L)"; break;
> case V4L2_PIX_FMT_VP8: descr = "VP8"; break;
> + case V4L2_PIX_FMT_VP8_FRAME: descr = "VP8 FRAME"; break;
> case V4L2_PIX_FMT_VP9: descr = "VP9"; break;
> case V4L2_PIX_FMT_HEVC: descr = "HEVC"; break; /* aka H.265 */
> case V4L2_PIX_FMT_FWHT: descr = "FWHT"; break; /* used in vicodec */
> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
> index 22b6d09c4764..183c7fc5d18d 100644
> --- a/include/media/v4l2-ctrls.h
> +++ b/include/media/v4l2-ctrls.h
> @@ -28,6 +28,7 @@
> */
> #include <media/mpeg2-ctrls.h>
> #include <media/h264-ctrls.h>
> +#include <media/vp8-ctrls.h>
>
> /* forward references */
> struct file;
> @@ -55,6 +56,7 @@ struct poll_table_struct;
> * @p_h264_scaling_matrix: Pointer to a struct v4l2_ctrl_h264_scaling_matrix.
> * @p_h264_slice_param: Pointer to a struct v4l2_ctrl_h264_slice_param.
> * @p_h264_decode_param: Pointer to a struct v4l2_ctrl_h264_decode_param.
> + * @p_vp8_frame_header: Pointer to a VP8 frame header structure.
> * @p: Pointer to a compound value.
> */
> union v4l2_ctrl_ptr {
> @@ -71,6 +73,7 @@ union v4l2_ctrl_ptr {
> struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix;
> struct v4l2_ctrl_h264_slice_param *p_h264_slice_param;
> struct v4l2_ctrl_h264_decode_param *p_h264_decode_param;
> + struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header;
> void *p;
> };
>
> diff --git a/include/media/vp8-ctrls.h b/include/media/vp8-ctrls.h
> new file mode 100644
> index 000000000000..95b63a0cb239
> --- /dev/null
> +++ b/include/media/vp8-ctrls.h
> @@ -0,0 +1,104 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * TODO: Make sure structs have no holes and are 4-byte aligned.
> + */
> +
> +#ifndef _VP8_CTRLS_H_
> +#define _VP8_CTRLS_H_
> +
> +#include <linux/v4l2-controls.h>
> +
> +#define V4L2_CID_MPEG_VIDEO_VP8_FRAME_HDR (V4L2_CID_MPEG_BASE + 260)
> +
> +#define V4L2_CTRL_TYPE_VP8_FRAME_HDR 0x220
> +
> +#define V4L2_VP8_SEGMNT_HDR_FLAG_ENABLED 0x01
> +#define V4L2_VP8_SEGMNT_HDR_FLAG_UPDATE_MAP 0x02
> +#define V4L2_VP8_SEGMNT_HDR_FLAG_UPDATE_FEATURE_DATA 0x04
> +
> +struct v4l2_vp8_segment_header {
> + __u8 segment_feature_mode;
> + __s8 quant_update[4];
> + __s8 lf_update[4];
> + __u8 segment_probs[3];
> + __u32 flags;
> +};
> +
> +#define V4L2_VP8_LF_HDR_ADJ_ENABLE 0x01
> +#define V4L2_VP8_LF_HDR_DELTA_UPDATE 0x02
> +struct v4l2_vp8_loopfilter_header {
> + __u16 type;
> + __u8 level;
> + __u8 sharpness_level;
> + __s8 ref_frm_delta_magnitude[4];
> + __s8 mb_mode_delta_magnitude[4];
> + __u16 flags;
> +};
> +
> +struct v4l2_vp8_quantization_header {
> + __u8 y_ac_qi;
> + __s8 y_dc_delta;
> + __s8 y2_dc_delta;
> + __s8 y2_ac_delta;
> + __s8 uv_dc_delta;
> + __s8 uv_ac_delta;
> + __u16 dequant_factors[4][3][2];
> +};
> +
> +struct v4l2_vp8_entropy_header {
> + __u8 coeff_probs[4][8][3][11];
> + __u8 y_mode_probs[4];
> + __u8 uv_mode_probs[3];
> + __u8 mv_probs[2][19];
> +};
> +
> +#define V4L2_VP8_FRAME_HDR_FLAG_EXPERIMENTAL 0x01
> +#define V4L2_VP8_FRAME_HDR_FLAG_SHOW_FRAME 0x02
> +#define V4L2_VP8_FRAME_HDR_FLAG_MB_NO_SKIP_COEFF 0x04
> +struct v4l2_ctrl_vp8_frame_header {
> + /* 0: keyframe, 1: not a keyframe */
> + __u8 key_frame; // could be a flag?
Yes, I think it would be more consistent to make this a flag.
> + __u8 version;
> +
> + /* Populated also if not a key frame */
> + __u16 width;
> + __u16 height;
> + __u8 horizontal_scale;
> + __u8 vertical_scale;
> +
> + struct v4l2_vp8_segment_header segment_header;
> + struct v4l2_vp8_loopfilter_header lf_header;
> + struct v4l2_vp8_quantization_header quant_header;
> + struct v4l2_vp8_entropy_header entropy_header;
> +
> + __u8 sign_bias_golden;
> + __u8 sign_bias_alternate;
> +
> + __u8 prob_skip_false;
> + __u8 prob_intra;
> + __u8 prob_last;
> + __u8 prob_gf;
> +
> + __u32 first_part_size;
> + __u32 first_part_offset; // this needed? it's always 3 + 7 * s->keyframe;
> + /*
> + * Offset in bits of MB data in first partition,
> + * i.e. bit offset starting from first_part_offset.
> + */
> + __u32 macroblock_bit_offset;
> +
> + __u8 num_dct_parts;
> + __u32 dct_part_sizes[8];
> +
> + __u8 bool_dec_range;
> + __u8 bool_dec_value;
> + __u8 bool_dec_count;
I don't know if we care about packing in general, but you have 3 bytes
in between a __u32 and a __u64.
> +
> + __u64 last_frame_ts;
> + __u64 golden_frame_ts;
> + __u64 alt_frame_ts;
> +
> + __u8 flags;
> +};
> +
> +#endif
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index f6a484017208..a906bfc0c8f0 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -664,6 +664,7 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
> #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
> #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
> +#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frames */
> #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */
> #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */
> #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
next prev parent reply other threads:[~2019-05-16 18:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-13 21:15 [RFC] media: uapi: Add VP8 low-level decoder API compound controls Ezequiel Garcia
2019-02-13 21:22 ` Ezequiel Garcia
2019-02-14 2:35 ` Nicolas Dufresne
2019-02-15 0:06 ` Ezequiel Garcia
2019-02-25 5:34 ` Tomasz Figa
2019-05-16 17:51 ` Nicolas Dufresne
2019-05-16 18:11 ` Nicolas Dufresne [this message]
2019-06-27 9:33 ` Paul Kocialkowski
2019-06-27 18:57 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6001c071ef37674442cf991760b222b19e2e3459.camel@ndufresne.ca \
--to=nicolas@ndufresne.ca \
--cc=acourbot@chromium.org \
--cc=ezequiel@collabora.com \
--cc=hans.verkuil@cisco.com \
--cc=kernel@collabora.com \
--cc=linux-media@vger.kernel.org \
--cc=posciak@chromium.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).