* [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set
@ 2019-07-17 9:24 Hans Verkuil
2019-07-19 7:24 ` Lad, Prabhakar
2019-07-19 7:52 ` Rui Miguel Silva
0 siblings, 2 replies; 3+ messages in thread
From: Hans Verkuil @ 2019-07-17 9:24 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Laurent Pinchart, Sakari Ailus, Prabhakar Lad, Akinobu Mita,
Eugen Hristev, Rui Miguel Silva
If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible
to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not
stored. So return 0 instead of -ENOTTY.
Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL
instead of -ENOTTY, after all the get_fmt functionality is still
present, just not supported for TRY.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
This was fixed for the ov7670 (https://patchwork.linuxtv.org/patch/57584/) when
working on the via-camera driver, but the same pattern is found in other drivers,
and those are fixed in this patch.
---
drivers/media/i2c/mt9m111.c | 2 +-
drivers/media/i2c/ov2640.c | 2 +-
drivers/media/i2c/ov2659.c | 4 +---
drivers/media/i2c/ov2680.c | 5 +----
drivers/media/i2c/ov5695.c | 5 +----
drivers/media/i2c/ov7740.c | 8 ++------
6 files changed, 7 insertions(+), 19 deletions(-)
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index d10fe3712036..d4864d155f0b 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -536,7 +536,7 @@ static int mt9m111_get_fmt(struct v4l2_subdev *sd,
format->format = *mf;
return 0;
#else
- return -ENOTTY;
+ return -EINVAL;
#endif
}
diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
index 30e7e6b2b293..39474b287bb2 100644
--- a/drivers/media/i2c/ov2640.c
+++ b/drivers/media/i2c/ov2640.c
@@ -932,7 +932,7 @@ static int ov2640_get_fmt(struct v4l2_subdev *sd,
format->format = *mf;
return 0;
#else
- return -ENOTTY;
+ return -EINVAL;
#endif
}
diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 5ed2413eac8a..a71277e361ff 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1055,7 +1055,7 @@ static int ov2659_get_fmt(struct v4l2_subdev *sd,
mutex_unlock(&ov2659->lock);
return 0;
#else
- return -ENOTTY;
+ return -EINVAL;
#endif
}
@@ -1131,8 +1131,6 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
*mf = fmt->format;
-#else
- ret = -ENOTTY;
#endif
} else {
s64 val;
diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index b10bcfabaeeb..164f983c1814 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -675,7 +675,7 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, format->pad);
#else
- ret = -ENOTTY;
+ ret = -EINVAL;
#endif
} else {
fmt = &sensor->fmt;
@@ -723,10 +723,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
try_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
format->format = *try_fmt;
-#else
- ret = -ENOTTY;
#endif
-
goto unlock;
}
diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
index e65a94353175..34b7046d9702 100644
--- a/drivers/media/i2c/ov5695.c
+++ b/drivers/media/i2c/ov5695.c
@@ -823,9 +823,6 @@ static int ov5695_set_fmt(struct v4l2_subdev *sd,
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
-#else
- mutex_unlock(&ov5695->mutex);
- return -ENOTTY;
#endif
} else {
ov5695->cur_mode = mode;
@@ -856,7 +853,7 @@ static int ov5695_get_fmt(struct v4l2_subdev *sd,
fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
#else
mutex_unlock(&ov5695->mutex);
- return -ENOTTY;
+ return -EINVAL;
#endif
} else {
fmt->format.width = mode->width;
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index 70bb870b1d08..a2f8f19bca7c 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -827,13 +827,9 @@ static int ov7740_set_fmt(struct v4l2_subdev *sd,
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
*mbus_fmt = format->format;
-
+#endif
mutex_unlock(&ov7740->mutex);
return 0;
-#else
- ret = -ENOTTY;
- goto error;
-#endif
}
ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
@@ -868,7 +864,7 @@ static int ov7740_get_fmt(struct v4l2_subdev *sd,
format->format = *mbus_fmt;
ret = 0;
#else
- ret = -ENOTTY;
+ ret = -EINVAL;
#endif
} else {
format->format = ov7740->format;
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set
2019-07-17 9:24 [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set Hans Verkuil
@ 2019-07-19 7:24 ` Lad, Prabhakar
2019-07-19 7:52 ` Rui Miguel Silva
1 sibling, 0 replies; 3+ messages in thread
From: Lad, Prabhakar @ 2019-07-19 7:24 UTC (permalink / raw)
To: Hans Verkuil
Cc: Linux Media Mailing List, Laurent Pinchart, Sakari Ailus,
Akinobu Mita, Eugen Hristev, Rui Miguel Silva
Hi Hans,
Thank you for the patch.
On Wed, Jul 17, 2019 at 10:24 AM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible
> to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not
> stored. So return 0 instead of -ENOTTY.
>
> Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL
> instead of -ENOTTY, after all the get_fmt functionality is still
> present, just not supported for TRY.
>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
> This was fixed for the ov7670 (https://patchwork.linuxtv.org/patch/57584/) when
> working on the via-camera driver, but the same pattern is found in other drivers,
> and those are fixed in this patch.
> ---
> drivers/media/i2c/mt9m111.c | 2 +-
> drivers/media/i2c/ov2640.c | 2 +-
> drivers/media/i2c/ov2659.c | 4 +---
for ov2659 changes,
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cheers,
--Prabhakar Lad
> drivers/media/i2c/ov2680.c | 5 +----
> drivers/media/i2c/ov5695.c | 5 +----
> drivers/media/i2c/ov7740.c | 8 ++------
> 6 files changed, 7 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> index d10fe3712036..d4864d155f0b 100644
> --- a/drivers/media/i2c/mt9m111.c
> +++ b/drivers/media/i2c/mt9m111.c
> @@ -536,7 +536,7 @@ static int mt9m111_get_fmt(struct v4l2_subdev *sd,
> format->format = *mf;
> return 0;
> #else
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> }
>
> diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
> index 30e7e6b2b293..39474b287bb2 100644
> --- a/drivers/media/i2c/ov2640.c
> +++ b/drivers/media/i2c/ov2640.c
> @@ -932,7 +932,7 @@ static int ov2640_get_fmt(struct v4l2_subdev *sd,
> format->format = *mf;
> return 0;
> #else
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> }
>
> diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
> index 5ed2413eac8a..a71277e361ff 100644
> --- a/drivers/media/i2c/ov2659.c
> +++ b/drivers/media/i2c/ov2659.c
> @@ -1055,7 +1055,7 @@ static int ov2659_get_fmt(struct v4l2_subdev *sd,
> mutex_unlock(&ov2659->lock);
> return 0;
> #else
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> }
>
> @@ -1131,8 +1131,6 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> *mf = fmt->format;
> -#else
> - ret = -ENOTTY;
> #endif
> } else {
> s64 val;
> diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
> index b10bcfabaeeb..164f983c1814 100644
> --- a/drivers/media/i2c/ov2680.c
> +++ b/drivers/media/i2c/ov2680.c
> @@ -675,7 +675,7 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, format->pad);
> #else
> - ret = -ENOTTY;
> + ret = -EINVAL;
> #endif
> } else {
> fmt = &sensor->fmt;
> @@ -723,10 +723,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> try_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> format->format = *try_fmt;
> -#else
> - ret = -ENOTTY;
> #endif
> -
> goto unlock;
> }
>
> diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
> index e65a94353175..34b7046d9702 100644
> --- a/drivers/media/i2c/ov5695.c
> +++ b/drivers/media/i2c/ov5695.c
> @@ -823,9 +823,6 @@ static int ov5695_set_fmt(struct v4l2_subdev *sd,
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
> -#else
> - mutex_unlock(&ov5695->mutex);
> - return -ENOTTY;
> #endif
> } else {
> ov5695->cur_mode = mode;
> @@ -856,7 +853,7 @@ static int ov5695_get_fmt(struct v4l2_subdev *sd,
> fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> #else
> mutex_unlock(&ov5695->mutex);
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> } else {
> fmt->format.width = mode->width;
> diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
> index 70bb870b1d08..a2f8f19bca7c 100644
> --- a/drivers/media/i2c/ov7740.c
> +++ b/drivers/media/i2c/ov7740.c
> @@ -827,13 +827,9 @@ static int ov7740_set_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
> *mbus_fmt = format->format;
> -
> +#endif
> mutex_unlock(&ov7740->mutex);
> return 0;
> -#else
> - ret = -ENOTTY;
> - goto error;
> -#endif
> }
>
> ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
> @@ -868,7 +864,7 @@ static int ov7740_get_fmt(struct v4l2_subdev *sd,
> format->format = *mbus_fmt;
> ret = 0;
> #else
> - ret = -ENOTTY;
> + ret = -EINVAL;
> #endif
> } else {
> format->format = ov7740->format;
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set
2019-07-17 9:24 [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set Hans Verkuil
2019-07-19 7:24 ` Lad, Prabhakar
@ 2019-07-19 7:52 ` Rui Miguel Silva
1 sibling, 0 replies; 3+ messages in thread
From: Rui Miguel Silva @ 2019-07-19 7:52 UTC (permalink / raw)
To: Hans Verkuil
Cc: Linux Media Mailing List, Laurent Pinchart, Sakari Ailus,
Prabhakar Lad, Akinobu Mita, Eugen Hristev
Hi Hans,
On Wed 17 Jul 2019 at 10:24, Hans Verkuil wrote:
> If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible
> to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not
> stored. So return 0 instead of -ENOTTY.
>
> Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL
> instead of -ENOTTY, after all the get_fmt functionality is still
> present, just not supported for TRY.
>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
> This was fixed for the ov7670 (https://patchwork.linuxtv.org/patch/57584/) when
> working on the via-camera driver, but the same pattern is found in other drivers,
> and those are fixed in this patch.
> ---
> drivers/media/i2c/mt9m111.c | 2 +-
> drivers/media/i2c/ov2640.c | 2 +-
> drivers/media/i2c/ov2659.c | 4 +---
> drivers/media/i2c/ov2680.c | 5 +----
> drivers/media/i2c/ov5695.c | 5 +----
> drivers/media/i2c/ov7740.c | 8 ++------
> 6 files changed, 7 insertions(+), 19 deletions(-)
>
for the ov2680:
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
---
Cheers,
Rui
> diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> index d10fe3712036..d4864d155f0b 100644
> --- a/drivers/media/i2c/mt9m111.c
> +++ b/drivers/media/i2c/mt9m111.c
> @@ -536,7 +536,7 @@ static int mt9m111_get_fmt(struct v4l2_subdev *sd,
> format->format = *mf;
> return 0;
> #else
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> }
>
> diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
> index 30e7e6b2b293..39474b287bb2 100644
> --- a/drivers/media/i2c/ov2640.c
> +++ b/drivers/media/i2c/ov2640.c
> @@ -932,7 +932,7 @@ static int ov2640_get_fmt(struct v4l2_subdev *sd,
> format->format = *mf;
> return 0;
> #else
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> }
>
> diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
> index 5ed2413eac8a..a71277e361ff 100644
> --- a/drivers/media/i2c/ov2659.c
> +++ b/drivers/media/i2c/ov2659.c
> @@ -1055,7 +1055,7 @@ static int ov2659_get_fmt(struct v4l2_subdev *sd,
> mutex_unlock(&ov2659->lock);
> return 0;
> #else
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> }
>
> @@ -1131,8 +1131,6 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> *mf = fmt->format;
> -#else
> - ret = -ENOTTY;
> #endif
> } else {
> s64 val;
> diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
> index b10bcfabaeeb..164f983c1814 100644
> --- a/drivers/media/i2c/ov2680.c
> +++ b/drivers/media/i2c/ov2680.c
> @@ -675,7 +675,7 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, format->pad);
> #else
> - ret = -ENOTTY;
> + ret = -EINVAL;
> #endif
> } else {
> fmt = &sensor->fmt;
> @@ -723,10 +723,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> try_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> format->format = *try_fmt;
> -#else
> - ret = -ENOTTY;
> #endif
> -
> goto unlock;
> }
>
> diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
> index e65a94353175..34b7046d9702 100644
> --- a/drivers/media/i2c/ov5695.c
> +++ b/drivers/media/i2c/ov5695.c
> @@ -823,9 +823,6 @@ static int ov5695_set_fmt(struct v4l2_subdev *sd,
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
> -#else
> - mutex_unlock(&ov5695->mutex);
> - return -ENOTTY;
> #endif
> } else {
> ov5695->cur_mode = mode;
> @@ -856,7 +853,7 @@ static int ov5695_get_fmt(struct v4l2_subdev *sd,
> fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> #else
> mutex_unlock(&ov5695->mutex);
> - return -ENOTTY;
> + return -EINVAL;
> #endif
> } else {
> fmt->format.width = mode->width;
> diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
> index 70bb870b1d08..a2f8f19bca7c 100644
> --- a/drivers/media/i2c/ov7740.c
> +++ b/drivers/media/i2c/ov7740.c
> @@ -827,13 +827,9 @@ static int ov7740_set_fmt(struct v4l2_subdev *sd,
> #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
> *mbus_fmt = format->format;
> -
> +#endif
> mutex_unlock(&ov7740->mutex);
> return 0;
> -#else
> - ret = -ENOTTY;
> - goto error;
> -#endif
> }
>
> ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
> @@ -868,7 +864,7 @@ static int ov7740_get_fmt(struct v4l2_subdev *sd,
> format->format = *mbus_fmt;
> ret = 0;
> #else
> - ret = -ENOTTY;
> + ret = -EINVAL;
> #endif
> } else {
> format->format = ov7740->format;
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-07-19 7:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-17 9:24 [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set Hans Verkuil
2019-07-19 7:24 ` Lad, Prabhakar
2019-07-19 7:52 ` Rui Miguel Silva
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).