From: mchehab@linuxtv.org
To: mchehab@kernel.org, linux-media@vger.kernel.org
Subject: Build failed in Jenkins: xawtv4 #2
Date: Mon, 12 Aug 2019 13:27:20 +0000 (UTC) [thread overview]
Message-ID: <870474744.17.1565616440616.JavaMail.jenkins@builder.linuxtv.org> (raw)
In-Reply-To: <1045441849.16.1565616341734.JavaMail.jenkins@builder.linuxtv.org>
See <https://builder.linuxtv.org/job/xawtv4/2/display/redirect>
Changes:
------------------------------------------
[...truncated 4.03 KB...]
checking for dlopen in -ldl... yes
checking for ELF... yes
checking for pthread_create in -lpthread... yes
checking for main in -lossaudio... no
checking for initscr in -lncurses... yes
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for Xft... yes
checking for jpeg_start_compress in -ljpeg... yes
checking for snd_seq_open in -lasound... yes
*** arts disabled
checking for mad_decoder_init in -lmad... no
checking for mpeg2_init in -lmpeg2... no
checking for lirc_init in -llirc_client... yes
checking for vbi_capture_fd in -lzvbi... yes
checking for vbi_capture_proxy_new in -lzvbi... yes
checking for vbi_capture_dvb_new2 in -lzvbi... yes
*** aalib support disabled
checking for dv_decoder_new in -ldv... yes
Package glib was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib' found
checking for lqt_query_registry in -lquicktime... yes
checking for DPMSQueryExtension in -lXdpms... no
checking for DPMSQueryExtension in -lXext... yes
checking for XineramaQueryExtension in -lXinerama... yes
checking for XRenderQueryExtension in -lXrender... yes
checking for XvQueryExtension in -lXv... yes
checking for XmStringGenerate in -lXm... yes
checking for glXChooseVisual in -lGL... yes
checking for gtk+ 2.4... gtk+-x11-2.0 >= 2.4 not found
checking for X11 config directory... /etc/X11
checking for X11 app-defaults directory... /etc/X11/app-defaults
checking if mmx should be used... no
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting
config.status: creating xawtv.spec
config.status: creating config.h
compile time options summary
============================
aalib : no
alsa : yes
aRts : no
dv : yes
QuickTime : yes
mad : no
mpeg2 : no
X11R6 : yes
gtk+ : no
OpenMotif : yes
OpenGL : yes
zvbi : yes
DVB : yes
+ make
CC console/dump-mixers.o
LD console/dump-mixers
CC console/record.o
LD console/record
CC console/showriff.o
LD console/showriff
CC console/showqt.o
console/showqt.c: In function ‘handle_classic_atom’:
console/showqt.c:505:19: warning: ‘%d’ directive writing between 1 and 10 bytes into a region of size 7 [-Wformat-overflow=]
sprintf(si,"[%d] ",loop);
^~
console/showqt.c:505:17: note: directive argument in the range [0, 2147483647]
sprintf(si,"[%d] ",loop);
^~~~~~~
console/showqt.c:505:6: note: ‘sprintf’ output between 5 and 14 bytes into a destination of size 8
sprintf(si,"[%d] ",loop);
^~~~~~~~~~~~~~~~~~~~~~~~
console/showqt.c:510:19: warning: ‘%d’ directive writing between 1 and 10 bytes into a region of size 7 [-Wformat-overflow=]
sprintf(si,"[%d] ",loop);
^~
console/showqt.c:510:17: note: directive argument in the range [1, 2147483647]
sprintf(si,"[%d] ",loop);
^~~~~~~
console/showqt.c:510:6: note: ‘sprintf’ output between 5 and 14 bytes into a destination of size 8
sprintf(si,"[%d] ",loop);
^~~~~~~~~~~~~~~~~~~~~~~~
LD console/showqt
CC console/streamer.o
CC common/sound.o
CC common/webcam.o
CC common/tuning.o
CC common/commands.o
common/commands.c: In function ‘keypad_handler’:
common/commands.c:1184:18: warning: ‘%d’ directive writing between 1 and 10 bytes into a region of size 8 [-Wformat-overflow=]
sprintf(ch,"%d",n);
^~
common/commands.c:1184:17: note: directive argument in the range [1, 2147483647]
sprintf(ch,"%d",n);
^~~~
common/commands.c:1184:6: note: ‘sprintf’ output between 2 and 11 bytes into a destination of size 8
sprintf(ch,"%d",n);
^~~~~~~~~~~~~~~~~~
CC common/devs.o
common/devs.c: In function ‘device_probe_video’:
common/devs.c:127:15: warning: variable ‘add’ set but not used [-Wunused-but-set-variable]
int err,i,add=0;
^~~
common/devs.c: In function ‘device_probe_dvb’:
common/devs.c:193:11: warning: variable ‘add’ set but not used [-Wunused-but-set-variable]
int i,add = 0;
^~~
CC common/parseconfig.o
CC common/fifo.o
CC common/capture.o
CC common/event.o
CC common/tv-config.o
CC common/dvb-tuning.o
common/dvb-tuning.c: In function ‘fixup_numbers’:
common/dvb-tuning.c:329:5: warning: enumeration value ‘FE_ATSC’ not handled in switch [-Wswitch]
switch (h->info.type) {
^~~~~~
common/dvb-tuning.c: In function ‘dump_fe_info’:
common/dvb-tuning.c:365:5: warning: enumeration value ‘FE_ATSC’ not handled in switch [-Wswitch]
switch (h->info.type) {
^~~~~~
common/dvb-tuning.c: In function ‘dvb_frontend_tune’:
common/dvb-tuning.c:433:5: warning: enumeration value ‘FE_ATSC’ not handled in switch [-Wswitch]
switch (h->info.type) {
^~~~~~
common/dvb-tuning.c: In function ‘parse_vdr_diseqc.constprop’:
common/dvb-tuning.c:1126:26: warning: ‘%d’ directive writing between 1 and 10 bytes into a region of size 9 [-Wformat-overflow=]
sprintf(section,"diseqc-%d",i++);
^~
common/dvb-tuning.c:1126:18: note: directive argument in the range [0, 2147483647]
sprintf(section,"diseqc-%d",i++);
^~~~~~~~~~~
common/dvb-tuning.c:1126:2: note: ‘sprintf’ output between 9 and 18 bytes into a destination of size 16
sprintf(section,"diseqc-%d",i++);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC structs/struct-dvb.o
CC structs/struct-dump.o
CC libng/grab-ng.o
libng/grab-ng.c: In function ‘ng_filter_single’:
libng/grab-ng.c:964:11: warning: variable ‘handle’ set but not used [-Wunused-but-set-variable]
void *handle;
^~~~~~
CC libng/devices.o
CC libng/writefile.o
CC libng/parse-mpeg.o
libng/parse-mpeg.c: In function ‘parse_pmt_desc’:
libng/parse-mpeg.c:680:13: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
int i,t,l;
^
libng/parse-mpeg.c: In function ‘get_lang_tag’:
libng/parse-mpeg.c:697:13: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
int i,t,l;
^
CC libng/parse-dvb.o
libng/parse-dvb.c: In function ‘parse_nit_desc_2’:
libng/parse-dvb.c:196:13: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
int i,t,l;
^
libng/parse-dvb.c: In function ‘parse_sdt_desc’:
libng/parse-dvb.c:239:13: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
int i,t,l;
^
libng/parse-dvb.c: In function ‘mpeg_parse_psi_nit’:
libng/parse-dvb.c:351:6: warning: the address of ‘network’ will always evaluate as ‘true’ [-Waddress]
if (network)
^~~~~~~
CC libng/color_common.o
CC libng/color_packed.o
CC libng/color_lut.o
CC libng/color_yuv2rgb.o
CC libng/convert.o
CC libng/misc.o
AR libng/libng.a
ar: creating libng/libng.a
LD console/streamer
CC console/webcam.o
CC console/ftp.o
LD console/webcam
CC console/scantv.o
console/scantv.c: In function ‘main’:
console/scantv.c:236:31: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
sprintf(dummy,"unknown (%s)",fchannel);
^~
CC common/vbi-dvb.o
CC common/vbi-data.o
In file included from common/vbi-data.c:17:
common/vbi-sim.c: In function ‘ttx_sim’:
common/vbi-sim.c:186:13: warning: variable ‘n’ set but not used [-Wunused-but-set-variable]
int i, j, n;
^
LD console/scantv
CC console/radio.o
LD console/radio
CC console/v4l-info.o
CC structs/struct-v4l.o
CC structs/struct-v4l2.o
LD console/v4l-info
CC console/v4l-conf.o
LD console/v4l-conf
CC debug/sysfs.o
debug/sysfs.c: In function ‘sysfs_find_path’:
debug/sysfs.c:63:33: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 63 [-Wformat-truncation=]
snprintf(path,sizeof(path),"%s/%s",sysfs_base,e_class->d_name);
^~
debug/sysfs.c:63:2: note: ‘snprintf’ output 2 or more bytes (assuming 257) into a destination of size 64
snprintf(path,sizeof(path),"%s/%s",sysfs_base,e_class->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LD debug/sysfs
CC debug/xvideo.o
debug/xvideo.c: In function ‘resize_event’:
debug/xvideo.c:96:12: warning: variable ‘wy’ set but not used [-Wunused-but-set-variable]
int wx,wy,wwidth,wheight;
^~
debug/xvideo.c:96:9: warning: variable ‘wx’ set but not used [-Wunused-but-set-variable]
int wx,wy,wwidth,wheight;
^~
LD debug/xvideo
CC debug/dvb-signal.o
LD debug/dvb-signal
CC debug/vbi-rec.o
LD debug/vbi-rec
CC debug/epg.o
debug/epg.c: In function ‘main’:
debug/epg.c:278:9: warning: variable ‘tuned’ set but not used [-Wunused-but-set-variable]
int tuned = 0;
^~~~~
debug/epg.c:67:32: warning: ‘%+ld’ directive output may be truncated writing between 2 and 17 bytes into a region of size 5 [-Wformat-truncation=]
snprintf(tz,sizeof(tz),"GMT%+ld",-timezone/3600);
^~~~
debug/epg.c:67:28: note: directive argument in the range [-2562047788015215, 2562047788015215]
snprintf(tz,sizeof(tz),"GMT%+ld",-timezone/3600);
^~~~~~~~~
debug/epg.c:67:5: note: ‘snprintf’ output between 6 and 21 bytes into a destination of size 8
snprintf(tz,sizeof(tz),"GMT%+ld",-timezone/3600);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC common/dvb-monitor.o
common/dvb-monitor.c:14:10: fatal error: glib.h: No such file or directory
#include <glib.h>
^~~~~~~~
compilation terminated.
make: *** [mk/Compile.mk:55: common/dvb-monitor.o] Error 1
Build step 'Execute shell' marked build as failure
next prev parent reply other threads:[~2019-08-12 13:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 13:25 Build failed in Jenkins: xawtv4 #1 mchehab
2019-08-12 13:27 ` mchehab [this message]
2019-08-12 13:33 ` Build failed in Jenkins: xawtv4 #3 mchehab
2019-08-12 13:38 ` Jenkins build is back to normal : xawtv4 #4 mchehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=870474744.17.1565616440616.JavaMail.jenkins@builder.linuxtv.org \
--to=mchehab@linuxtv.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).