From: Jenkins Builder Robot <jenkins@linuxtv.org>
To: mchehab@kernel.org, linux-media@vger.kernel.org
Subject: Build failed in Jenkins: media-build #2969
Date: Thu, 13 Feb 2020 17:19:19 +0000 (UTC) [thread overview]
Message-ID: <994996962.6.1581614359648.JavaMail.jenkins@builder.linuxtv.org> (raw)
See <https://builder.linuxtv.org/job/media-build/2969/display/redirect?page=changes>
Changes:
[hverkuil-cisco] Fix v4.4 build
[hverkuil-cisco] Patch videobuf-dma-sg.c for <5.6.
[hverkuil-cisco] Drop backports/v4.18_add_map_atomic.patch
------------------------------------------
Started by an SCM change
Running as SYSTEM
Building remotely on slave1 in workspace <https://builder.linuxtv.org/job/media-build/ws/>
No credentials specified
> git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
> git config remote.origin.url git://linuxtv.org/media_build.git # timeout=10
Fetching upstream changes from git://linuxtv.org/media_build.git
> git --version # timeout=10
> git fetch --tags --force --progress -- git://linuxtv.org/media_build.git +refs/heads/*:refs/remotes/origin/* # timeout=10
> git rev-parse refs/remotes/origin/master^{commit} # timeout=10
> git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10
Checking out Revision 130e88d25c69a5371079a266ecdd09c0577cf7b6 (refs/remotes/origin/master)
> git config core.sparsecheckout # timeout=10
> git checkout -f 130e88d25c69a5371079a266ecdd09c0577cf7b6 # timeout=10
Commit message: "Drop backports/v4.18_add_map_atomic.patch"
> git rev-list --no-walk 7b37031dca3e3af4b8416e028dc0e10a37ca99c7 # timeout=10
[media-build] $ /bin/sh -xe /tmp/jenkins4295758709307358945.sh
+ ./build
Checking if the needed tools for Debian GNU/Linux 10 (buster) are available
Needed package dependencies are met.
************************************************************
* This script will download the latest tarball and build it*
* Assuming that your kernel is compatible with the latest *
* drivers. If not, you'll need to add some extra backports,*
* ./backports/<kernel> directory. *
* It will also update this tree to be sure that all compat *
* bits are there, to avoid compilation failures *
************************************************************
************************************************************
* All drivers and build system are under GPLv2 License *
* Firmware files are under the license terms found at: *
* http://www.linuxtv.org/downloads/firmware/ *
* Please abort in the next 5 secs if you don't agree with *
* the license *
************************************************************
Not aborted. It means that the licence was agreed. Proceeding...
****************************
Updating the building system
****************************
From git://linuxtv.org/media_build
* branch master -> FETCH_HEAD
Already up to date.
make: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
wget http://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5 -O linux-media.tar.bz2.md5.tmp
--2020-02-13 17:18:19-- http://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5
Resolving linuxtv.org (linuxtv.org)... 130.149.80.248
Connecting to linuxtv.org (linuxtv.org)|130.149.80.248|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5 [following]
--2020-02-13 17:18:19-- https://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5
Connecting to linuxtv.org (linuxtv.org)|130.149.80.248|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 105 [application/x-bzip2]
Saving to: ‘linux-media.tar.bz2.md5.tmp’
0K 100% 194M=0s
2020-02-13 17:18:20 (194 MB/s) - ‘linux-media.tar.bz2.md5.tmp’ saved [105/105]
make: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
make: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
tar xfj linux-media.tar.bz2
rm -f .patches_applied .linked_dir .git_log.md5
make: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
**********************************************************
* Downloading firmwares from linuxtv.org. *
**********************************************************
firmware/dvb-usb-vp702x-01.fw
firmware/dvb-usb-vp7045-01.fw
firmware/dvb-fe-bcm3510-01.fw
firmware/as102_data2_st.hex
firmware/dvb-usb-terratec-h7-drxk.fw
firmware/isdbt_nova_12mhz.inp
firmware/Boot.S
firmware/dvb_nova_12mhz_b0.inp
firmware/dvb-fe-xc4000-1.4.1.fw
firmware/sms1xxx-hcw-55xxx-isdbt-02.fw
firmware/sms1xxx-nova-a-dvbt-01.fw
firmware/dvb-usb-avertv-a800-02.fw
firmware/cmmb_venice_12mhz.inp
firmware/dvb-fe-xc5000c-4.1.30.7.fw
firmware/v4l-cx23418-cpu.fw
firmware/v4l-cx23885-enc-broken.fw
firmware/dvb-fe-drxj-mc-vsb-1.0.8.fw
firmware/dvb_nova_12mhz.inp
firmware/dvb-usb-dib0700-1.20.fw
firmware/tdmb_nova_12mhz.inp
firmware/as102_data1_st.hex
firmware/dvb-fe-or51132-vsb.fw
firmware/dvb-usb-it9135-02.fw
firmware/v4l-cx23418-apu.fw
firmware/dvb-ttpci-01.fw-261f
firmware/v4l-cx23418-dig.fw
firmware/dvb-ttpci-01.fw-261c
firmware/dvb-usb-bluebird-01.fw
firmware/dvb-fe-or51211.fw
firmware/dvb-fe-or51132-qam.fw
firmware/sms1xxx-stellar-dvbt-01.fw
firmware/dvb-usb-dibusb-5.0.0.11.fw
firmware/dvb-fe-drxj-mc-vsb-qam-1.0.8.fw
firmware/dvb-usb-terratec-h5-drxk.fw
firmware/dvb-usb-wt220u-02.fw
firmware/v4l-cx23885-enc.fw
firmware/dvb-ttpci-01.fw-2622
firmware/dvb-usb-wt220u-01.fw
firmware/v4l-cx25840.fw
firmware/dvb-fe-drxj-mc-1.0.8.fw
firmware/v4l-cx231xx-avcore-01.fw
firmware/dvb-usb-dtt200u-01.fw
firmware/dvb-usb-dibusb-6.0.0.8.fw
firmware/sms1xxx-nova-b-dvbt-01.fw
firmware/dvb-fe-xc5000-1.6.114.fw
firmware/cmmb_vega_12mhz.inp
firmware/dvb-usb-it9135-01.fw
firmware/isdbt_nova_12mhz_b0.inp
firmware/dvb-ttpci-01.fw-261a
firmware/dvb-ttpci-01.fw-261b
firmware/dvb-ttpci-01.fw-261d
firmware/README
firmware/isdbt_rio.inp
firmware/dvb-usb-umt-010-02.fw
firmware/sms1xxx-hcw-55xxx-dvbt-02.fw
firmware/dvb-usb-terratec-h7-az6007.fw
firmware/v4l-cx23885-avcore-01.fw
******************
* Start building *
******************
make -C <https://builder.linuxtv.org/job/media-build/ws/v4l> allyesconfig
make[1]: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/v4l'>
make[2]: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
Applying patches for kernel 4.19.0-5-amd64
patch -s -f -N -p1 -i ../backports/api_version.patch
patch -s -f -N -p1 -i ../backports/pr_fmt.patch
patch -s -f -N -p1 -i ../backports/debug.patch
patch -s -f -N -p1 -i ../backports/drx39xxj.patch
patch -s -f -N -p1 -i ../backports/v5.6_pin_user_pages.patch
2 out of 2 hunks FAILED
make[2]: *** [Makefile:132: apply_patches] Error 1
make[2]: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
make[1]: *** [Makefile:378: allyesconfig] Error 2
make[1]: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/v4l'>
make: *** [Makefile:26: allyesconfig] Error 2
can't select all drivers at ./build line 525
Build step 'Execute shell' marked build as failure
next reply other threads:[~2020-02-13 17:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-13 17:19 Jenkins Builder Robot [this message]
2020-02-13 17:34 ` Build failed in Jenkins: media-build #2970 Jenkins Builder Robot
2020-02-14 8:06 ` Build failed in Jenkins: media-build #2971 Jenkins Builder Robot
2020-02-14 9:21 ` Jenkins build is back to normal : media-build #2972 Jenkins Builder Robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=994996962.6.1581614359648.JavaMail.jenkins@builder.linuxtv.org \
--to=jenkins@linuxtv.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).