From: Tomasz Figa <tfiga@chromium.org>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org>,
Linux Media Mailing List <linux-media@vger.kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
Vikash Garodia <vgarodia@codeaurora.org>,
Alexandre Courbot <acourbot@chromium.org>,
Malathi Gottam <mgottam@codeaurora.org>
Subject: Re: [PATCH 10/10] venus: dec: make decoder compliant with stateful codec API
Date: Mon, 27 May 2019 17:18:39 +0900 [thread overview]
Message-ID: <CAAFQd5CMpQ4ODyeBPnOv4w9ktqPsiqJtSkpRhAx+XgQ=Lz9crQ@mail.gmail.com> (raw)
In-Reply-To: <a9b11ba0-adca-f974-67a5-a0fe54689bba@xs4all.nl>
On Mon, May 27, 2019 at 4:39 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> On 5/27/19 5:51 AM, Tomasz Figa wrote:
> > On Tue, May 21, 2019 at 9:27 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
> >>
> >> On 5/21/19 11:09 AM, Tomasz Figa wrote:
> >>> Hi Stan,
> >>>
> >>> On Mon, May 20, 2019 at 11:47 PM Stanimir Varbanov
> >>> <stanimir.varbanov@linaro.org> wrote:
> >>>>
> >>>> Hi Tomasz,
> >>>>
> >>>> On 4/24/19 3:39 PM, Tomasz Figa wrote:
> >>>>> On Wed, Apr 24, 2019 at 9:15 PM Stanimir Varbanov
> >>>>> <stanimir.varbanov@linaro.org> wrote:
> >>>>>>
> >>>>>> Hi Hans,
> >>>>>>
> >>>>>> On 2/15/19 3:44 PM, Hans Verkuil wrote:
> >>>>>>> Hi Stanimir,
> >>>>>>>
> >>>>>>> I never paid much attention to this patch series since others were busy
> >>>>>>> discussing it and I had a lot of other things on my plate, but then I heard
> >>>>>>> that this patch made G_FMT blocking.
> >>>>>>
> >>>>>> OK, another option could be to block REQBUF(CAPTURE) until event from hw
> >>>>>> is received that the stream is parsed and the resolution is correctly
> >>>>>> set by application. Just to note that I'd think to this like a temporal
> >>>>>> solution until gstreamer implements v4l events.
> >>>>>>
> >>>>>> Is that looks good to you?
> >>>>>
> >>>>> Hmm, I thought we concluded that gstreamer sets the width and height
> >>>>> in OUTPUT queue before querying the CAPTURE queue and so making the
> >>>>> driver calculate the CAPTURE format based on what's set on OUTPUT
> >>>>> would work fine. Did I miss something?
> >>>>
> >>>> Nobody is miss something.
> >>>>
> >>>> First some background about how Venus implements stateful codec API.
> >>>>
> >>>> The Venus firmware can generate two events "sufficient" and
> >>>> "insufficient" buffer requirements (this includes decoder output buffer
> >>>> size and internal/scratch buffer sizes). Presently I always set minimum
> >>>> possible decoder resolution no matter what the user said, and by that
> >>>> way I'm sure that "insufficient" event will always be triggered by the
> >>>> firmware (the other reason to take this path is because this is the
> >>>> least-common-divider for all supported Venus hw/fw versions thus common
> >>>> code in the driver). The reconfiguration (during codec Initialization
> >>>> sequence) is made from STREAMON(CAPTURE) context. Now, to make that
> >>>> re-configuration happen I need to wait for "insufficient" event from
> >>>> firmware in order to know the real coded resolution.
> >>>>
> >>>> In the case of gstreamer where v4l2_events support is missing I have to
> >>>> block (wait for firmware event) REQBUF(CAPTURE) (vb2::queue_setup) or
> >>>> STREAMON(CAPTURE) (vb2::start_streaming).
> >>>>
> >>>> I tried to set the coded resolution to the firmware as-is it set by
> >>>> gstreamer but then I cannot receive the "sufficient" event for VP8 and
> >>>> VP9 codecs. So I return back to the solution with minimum resolution above.
> >>>>
> >>>> I'm open for suggestions.
> >>>
> >>> I think you could still keep setting the minimum size and wait for the
> >>> "insufficient" event. At the same time, you could speculatively
> >>> advertise the expected "sufficient" size on the CAPTURE queue before
> >>> the hardware signals those. Even if you mispredict them, you'll get
> >>> the event, update the CAPTURE resolution and send the source change
> >>> event to the application, which would then give you the correct
> >>> buffers. Would that work for you?
> >>
> >> As I understand it this still would require event support, which gstreamer
> >> doesn't have.
> >
> > I don't think it matches what I remember from the earlier discussion.
> > As long as Gstreamer sets the visible resolution (from the container
> > AFAIR) on OUTPUT, the driver would adjust it to something that is
> > expected to be the right framebuffer resolution and so Gstreamer would
> > be able to continue. Of course if the expected value doesn't match, it
> > wouldn't work, but it's the same as currently for Coda AFAICT.
> >
> >>
> >> I think it is OK to have REQBUFS sleep in this case. However, I would only
> >
> > Why REQBUFS? While that could possibly allow us to allocate the right
> > buffers, Gstreamer wouldn't be able to know the right format, because
> > it would query it before REQBUFS, wouldn't it?
>
> Oops, you are right. It's got to be in G_FMT(CAPTURE), but *only* if
> nobody subscribed to the SOURCE_CHANGE event.
>
> >
> > For this reason, s5p-mfc makes G_FMT(CAPTURE) blocking and if we
> > decide to forcefully keep the compatibility, even with in drivers, we
> > should probably do the same here.
> >
> >> enable this behavior if the application didn't subscribe to the SOURCE_CHANGE
> >> event. That's easy enough to check in the driver. And that means that if the
> >> application is well written, then the driver will behave in a completely
> >> standard way that the compliance test can check.
> >
> > I guess one could have some helpers for this. They would listen to the
> > source change events internally and block / wake-up appropriate ioctls
> > whenever necessary.
>
> I really do not want this for new drivers. gstreamer should be fixed.
> A blocking G_FMT is just plain bad. Only those drivers that do this, can
> still block if nobody subscribed to EVENT_SOURCE_CHANGE.
Yeah and that's why I just suggested to mimic coda, which doesn't
block, but apparently gstreamer still works with it.
>
> > Another question: If we intend this to be implemented in new drivers
> > too, should it be documented in the spec?
>
> We most certainly do NOT want to implement this in new drivers.
>
Makes sense.
When venus was merged initially, did it already have a blocking G_FMT?
Best regards,
Tomasz
next prev parent reply other threads:[~2019-05-27 8:18 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-17 16:19 [PATCH 00/10] Venus stateful Codec API Stanimir Varbanov
2019-01-17 16:19 ` [PATCH 01/10] venus: hfi_cmds: add more not-implemented properties Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 02/10] venus: helpers: fix dynamic buffer mode for v4 Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 03/10] venus: helpers: export few helper functions Stanimir Varbanov
2019-01-24 8:43 ` Alexandre Courbot
2019-01-24 8:48 ` Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 04/10] venus: hfi: add type argument to hfi flush function Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 05/10] venus: hfi: export few HFI functions Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 06/10] venus: hfi: return an error if session_init is already called Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 07/10] venus: helpers: add three more helper functions Stanimir Varbanov
2019-01-24 8:43 ` Alexandre Courbot
2019-01-24 8:54 ` Stanimir Varbanov
2019-01-25 5:47 ` Alexandre Courbot
2019-01-17 16:20 ` [PATCH 08/10] venus: vdec_ctrls: get real minimum buffers for capture Stanimir Varbanov
2019-01-24 8:43 ` Alexandre Courbot
2019-01-24 9:59 ` Stanimir Varbanov
2019-01-17 16:20 ` [PATCH 09/10] venus: vdec: allow bigger sizeimage set by clients Stanimir Varbanov
2019-01-24 8:43 ` Alexandre Courbot
2019-01-24 10:05 ` Stanimir Varbanov
2019-01-25 5:36 ` Alexandre Courbot
2019-01-17 16:20 ` [PATCH 10/10] venus: dec: make decoder compliant with stateful codec API Stanimir Varbanov
2019-01-21 11:20 ` mgottam
2019-01-21 11:29 ` mgottam
2019-01-24 10:24 ` Stanimir Varbanov
2019-01-24 8:44 ` Alexandre Courbot
2019-01-24 12:34 ` Stanimir Varbanov
2019-01-25 5:44 ` Alexandre Courbot
2019-01-25 7:59 ` Tomasz Figa
2019-01-25 10:25 ` Stanimir Varbanov
2019-01-28 7:38 ` Tomasz Figa
2019-01-28 16:28 ` Stanimir Varbanov
2019-01-29 8:24 ` Tomasz Figa
2019-01-30 3:18 ` Nicolas Dufresne
2019-01-30 3:38 ` Tomasz Figa
2019-01-30 4:21 ` Nicolas Dufresne
2019-01-30 6:17 ` Tomasz Figa
2019-01-30 15:32 ` Nicolas Dufresne
2019-01-31 12:42 ` Philipp Zabel
2019-01-31 13:34 ` Tomasz Figa
2019-01-31 15:18 ` Nicolas Dufresne
2019-02-05 6:26 ` Tomasz Figa
2019-02-05 9:00 ` Hans Verkuil
2019-02-05 9:31 ` Tomasz Figa
2019-02-05 10:35 ` Hans Verkuil
2019-02-07 7:33 ` Tomasz Figa
2019-02-14 2:43 ` Tomasz Figa
2019-02-14 16:19 ` Nicolas Dufresne
2019-04-09 9:59 ` Tomasz Figa
2019-04-09 16:30 ` Nicolas Dufresne
2019-04-10 2:32 ` Tomasz Figa
2019-02-15 13:44 ` Hans Verkuil
2019-02-15 16:27 ` Nicolas Dufresne
2019-02-15 16:40 ` Hans Verkuil
2019-04-24 12:15 ` Stanimir Varbanov
2019-04-24 12:39 ` Tomasz Figa
2019-05-20 14:47 ` Stanimir Varbanov
2019-05-21 9:09 ` Tomasz Figa
2019-05-21 12:27 ` Hans Verkuil
2019-05-27 3:51 ` Tomasz Figa
2019-05-27 7:39 ` Hans Verkuil
2019-05-27 8:18 ` Tomasz Figa [this message]
2019-05-31 8:01 ` Stanimir Varbanov
2019-05-31 13:53 ` Nicolas Dufresne
2019-06-03 7:25 ` Hans Verkuil
2019-06-03 7:30 ` Tomasz Figa
2019-01-24 8:43 ` [PATCH 00/10] Venus stateful Codec API Alexandre Courbot
2019-01-24 10:12 ` Stanimir Varbanov
2019-01-25 5:34 ` Alexandre Courbot
2019-01-25 10:35 ` Stanimir Varbanov
2019-01-28 4:16 ` Alexandre Courbot
2019-01-28 4:30 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAAFQd5CMpQ4ODyeBPnOv4w9ktqPsiqJtSkpRhAx+XgQ=Lz9crQ@mail.gmail.com' \
--to=tfiga@chromium.org \
--cc=acourbot@chromium.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mgottam@codeaurora.org \
--cc=stanimir.varbanov@linaro.org \
--cc=vgarodia@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).