linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
To: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org
Subject: Re: Kernel error "Unknown pixelformat 0x00000000" occurs when I start capture video
Date: Wed, 9 Jan 2019 08:51:29 +0500	[thread overview]
Message-ID: <CABXGCsPJJfu7fwVnx3ovHTDF-rBFrUqmc7dqF+R-Q-NE2vmn5w@mail.gmail.com> (raw)
In-Reply-To: <20190108170000.4f0d6e6d@coco.lan>

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

I upgraded kernel to 5.0 rc1 and the error message  "Unknown
pixelformat 0x00000000" are disappeared.

Instead I see not obvious message "uvcvideo: Non-zero status (-71) in
video completion handler."
Maybe in this case better to write "Video format XXX not supported" ?
It would help quickly understand that is culprit here.


--
Best Regards,
Mike Gavrilov.

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain; charset="US-ASCII"; name="dmesg.txt", Size: 95249 bytes --]

[    0.000000] Linux version 5.0.0-0.rc1.git0.1.fc30.x86_64 (mockbuild@bkernel04.phx2.fedoraproject.org) (gcc version 8.2.1 20181215 (Red Hat 8.2.1-6) (GCC)) #1 SMP Mon Jan 7 16:12:51 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=(hd1,gpt2)/boot/vmlinuz-5.0.0-0.rc1.git0.1.fc30.x86_64 root=UUID=1f9a5daa-5bbb-4e44-99aa-ce4a83d40619 ro resume=UUID=c1820a2a-10ac-4ff7-a086-e73a4fc14c2d rhgb mem_encrypt=off scsi_mod.use_blk_mq=1 log_buf_len=4M
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000da043fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da044000-0x00000000db540fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000db541000-0x00000000db568fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000db569000-0x00000000dba19fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dba1a000-0x00000000dc591fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc592000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xccb06018-0xccb17057] usable ==> usable
[    0.000000] e820: update [mem 0xccb06018-0xccb17057] usable ==> usable
[    0.000000] e820: update [mem 0xccaec018-0xccb05457] usable ==> usable
[    0.000000] e820: update [mem 0xccaec018-0xccb05457] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a20a000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000ccaec017] usable
[    0.000000] reserve setup_data: [mem 0x00000000ccaec018-0x00000000ccb05457] usable
[    0.000000] reserve setup_data: [mem 0x00000000ccb05458-0x00000000ccb06017] usable
[    0.000000] reserve setup_data: [mem 0x00000000ccb06018-0x00000000ccb17057] usable
[    0.000000] reserve setup_data: [mem 0x00000000ccb17058-0x00000000da043fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000da044000-0x00000000db540fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000db541000-0x00000000db568fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000db569000-0x00000000dba19fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dba1a000-0x00000000dc591fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dc592000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000081f37ffff] usable
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xdb549000  ACPI=0xdb549000  SMBIOS=0xdc455000  SMBIOS 3.0=0xdc454000  ESRT=0xd7d1b818  MEMATTR=0xd5f50018 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 1103 11/16/2018
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x81f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000820000000 aka 33280M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000d7d1b818 to 0x00000000d7d1b850.
[    0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x528001000, 0x528001fff] PGTABLE
[    0.000000] BRK [0x528002000, 0x528002fff] PGTABLE
[    0.000000] BRK [0x528003000, 0x528003fff] PGTABLE
[    0.000000] BRK [0x528004000, 0x528004fff] PGTABLE
[    0.000000] BRK [0x528005000, 0x528005fff] PGTABLE
[    0.000000] BRK [0x528006000, 0x528006fff] PGTABLE
[    0.000000] BRK [0x528007000, 0x528007fff] PGTABLE
[    0.000000] BRK [0x528008000, 0x528008fff] PGTABLE
[    0.000000] BRK [0x528009000, 0x528009fff] PGTABLE
[    0.000000] BRK [0x52800a000, 0x52800afff] PGTABLE
[    0.000000] BRK [0x52800b000, 0x52800bfff] PGTABLE
[    0.000000] BRK [0x52800c000, 0x52800cfff] PGTABLE
[    0.000000] printk: log_buf_len: 4194304 bytes
[    0.000000] printk: early log buf free: 253180(96%)
[    0.000000] RAMDISK: [mem 0x5c515000-0x5e06dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DB549000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DB549098 0000A4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DB557490 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-624)
[    0.000000] ACPI: DSDT 0x00000000DB5491D0 00E2BC (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DBA02D80 000040
[    0.000000] ACPI: APIC 0x00000000DB5575A8 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DB557688 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DB5576D0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DB557770 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DB560408 002314 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DB562720 000F50 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DB563670 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DB5636A0 002DA8 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DB566448 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x00000000DB5681A8 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: HPET 0x00000000DB5664E0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DB566518 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DB566540 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x00000000DB566588 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DB566658 001B4E (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x81ef55000-0x81ef7ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000081f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009cfffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20a000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000da043fff]
[    0.000000]   node   0: [mem 0x00000000dc592000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000081f37ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 14553 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
[    0.000000] On node 0 totalpages: 8370855
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14047 pages used for memmap
[    0.000000]   DMA32 zone: 898952 pages, LIFO batch:63
[    0.000000]   Normal zone: 116686 pages used for memmap
[    0.000000]   Normal zone: 7467904 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xccaec000-0xccaecfff]
[    0.000000] PM: Registered nosave memory: [mem 0xccb05000-0xccb05fff]
[    0.000000] PM: Registered nosave memory: [mem 0xccb06000-0xccb06fff]
[    0.000000] PM: Registered nosave memory: [mem 0xccb17000-0xccb17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda044000-0xdb540fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb541000-0xdb568fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb569000-0xdba19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdba1a000-0xdc591fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x51e with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8240032
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd1,gpt2)/boot/vmlinuz-5.0.0-0.rc1.git0.1.fc30.x86_64 root=UUID=1f9a5daa-5bbb-4e44-99aa-ce4a83d40619 ro resume=UUID=c1820a2a-10ac-4ff7-a086-e73a4fc14c2d rhgb mem_encrypt=off scsi_mod.use_blk_mq=1 log_buf_len=4M
[    0.000000] Memory: 32748092K/33483420K available (12291K kernel code, 1517K rwdata, 4132K rodata, 2200K init, 4716K bss, 735328K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 38827 entries in 152 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 65792, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20181213
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.001000] Switched APIC routing to physical flat.
[    0.002000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.009000] tsc: PIT calibration matches HPET. 2 loops
[    0.009000] tsc: Detected 3692.624 MHz processor
[    0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a743bb8f0f, max_idle_ns: 881590561382 ns
[    0.000011] Calibrating delay loop (skipped), value calculated using timer frequency.. 7385.24 BogoMIPS (lpj=3692624)
[    0.000013] pid_max: default: 32768 minimum: 301
[    0.002039] LSM: Security Framework initializing
[    0.002041] Yama: becoming mindful.
[    0.002044] SELinux:  Initializing.
[    0.005821] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.008268] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.008344] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.008396] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.008563] mce: CPU supports 23 MCE banks
[    0.008582] LVT offset 1 assigned for vector 0xf9
[    0.008642] LVT offset 2 assigned for vector 0xf4
[    0.008652] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.008653] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.008656] Spectre V2 : Mitigation: Full AMD retpoline
[    0.008657] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.008663] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.008664] Spectre V2 : User space: Vulnerable
[    0.008666] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.008815] Freeing SMP alternatives memory: 36K
[    0.011007] smpboot: CPU0: AMD Ryzen 7 2700X Eight-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.011007] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.011007] ... version:                0
[    0.011007] ... bit width:              48
[    0.011007] ... generic registers:      6
[    0.011007] ... value mask:             0000ffffffffffff
[    0.011007] ... max period:             00007fffffffffff
[    0.011007] ... fixed-purpose events:   0
[    0.011007] ... event mask:             000000000000003f
[    0.011007] rcu: Hierarchical SRCU implementation.
[    0.011007] random: crng done (trusting CPU's manufacturer)
[    0.011007] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.011007] smp: Bringing up secondary CPUs ...
[    0.011007] x86: Booting SMP configuration:
[    0.011007] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.028028] smp: Brought up 1 node, 16 CPUs
[    0.028028] smpboot: Max logical packages: 1
[    0.028028] smpboot: Total of 16 processors activated (118163.96 BogoMIPS)
[    0.030251] devtmpfs: initialized
[    0.030251] x86/mm: Memory block size: 128MB
[    0.031618] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[    0.031618] PM: Registering ACPI NVS region [mem 0xdb569000-0xdba19fff] (4919296 bytes)
[    0.031618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.031618] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.031618] pinctrl core: initialized pinctrl subsystem
[    0.031618] RTC time: 03:19:32, date: 2019-01-09
[    0.032116] NET: Registered protocol family 16
[    0.032178] audit: initializing netlink subsys (disabled)
[    0.032183] audit: type=2000 audit(1547003972.041:1): state=initialized audit_enabled=0 res=1
[    0.032183] cpuidle: using governor menu
[    0.032183] ACPI: bus type PCI registered
[    0.032183] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.032183] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.032183] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.032183] PCI: Using configuration type 1 for base access
[    0.033622] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.033622] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.033622] cryptd: max_cpu_qlen set to 1000
[    0.033622] fbcon: Taking over console
[    0.033622] ACPI: Added _OSI(Module Device)
[    0.033622] ACPI: Added _OSI(Processor Device)
[    0.033622] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.033622] ACPI: Added _OSI(Processor Aggregator Device)
[    0.033622] ACPI: Added _OSI(Linux-Dell-Video)
[    0.033622] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.033622] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.039948] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.041072] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.043012] ACPI: EC: EC started
[    0.043012] ACPI: EC: interrupt blocked
[    0.043012] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.043012] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.043012] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.043012] ACPI: Interpreter enabled
[    0.043012] ACPI: (supports S0 S3 S4 S5)
[    0.043012] ACPI: Using IOAPIC for interrupt routing
[    0.043012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.043176] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.047954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.047959] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.048059] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
[    0.048152] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.048160] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.048357] PCI host bridge to bus 0000:00
[    0.048360] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.048362] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.048364] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.048365] pci_bus 0000:00: root bus resource [io  0x0d00-0xefff window]
[    0.048367] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.048369] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.048371] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.048373] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.048375] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.048381] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.048439] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.048515] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.048564] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
[    0.049053] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.050021] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.050049] pci 0000:00:01.3: enabling Extended Tags
[    0.050861] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.050946] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.051011] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.051059] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.051871] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.051959] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.052029] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.052076] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.052806] pci 0000:00:07.1: enabling Extended Tags
[    0.052883] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.052969] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.053019] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.053046] pci 0000:00:08.1: enabling Extended Tags
[    0.053917] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.054037] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.054238] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.054443] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.054479] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.054516] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.054551] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.054587] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.054622] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.054658] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.054693] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.054908] pci 0000:01:00.0: [8086:2700] type 00 class 0x010802
[    0.054925] pci 0000:01:00.0: reg 0x10: [mem 0xfe910000-0xfe913fff 64bit]
[    0.054947] pci 0000:01:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref]
[    0.055039] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.055044] pci 0000:00:01.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.055108] pci 0000:02:00.0: [1022:43d0] type 00 class 0x0c0330
[    0.055128] pci 0000:02:00.0: reg 0x10: [mem 0xfe5a0000-0xfe5a7fff 64bit]
[    0.055160] pci 0000:02:00.0: enabling Extended Tags
[    0.055204] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.055266] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601
[    0.055308] pci 0000:02:00.1: reg 0x24: [mem 0xfe580000-0xfe59ffff]
[    0.055314] pci 0000:02:00.1: reg 0x30: [mem 0xfe500000-0xfe57ffff pref]
[    0.055319] pci 0000:02:00.1: enabling Extended Tags
[    0.055352] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.055397] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400
[    0.055431] pci 0000:02:00.2: enabling Extended Tags
[    0.055467] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.055538] pci 0000:00:01.3: PCI bridge to [bus 02-08]
[    0.055542] pci 0000:00:01.3:   bridge window [io  0xc000-0xdfff]
[    0.055543] pci 0000:00:01.3:   bridge window [mem 0xfe300000-0xfe5fffff]
[    0.055611] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400
[    0.055650] pci 0000:03:00.0: enabling Extended Tags
[    0.055692] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.055751] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400
[    0.055790] pci 0000:03:01.0: enabling Extended Tags
[    0.055832] pci 0000:03:01.0: PME# supported from D3hot D3cold
[    0.055894] pci 0000:03:02.0: [1022:43c7] type 01 class 0x060400
[    0.055933] pci 0000:03:02.0: enabling Extended Tags
[    0.055975] pci 0000:03:02.0: PME# supported from D3hot D3cold
[    0.056036] pci 0000:03:03.0: [1022:43c7] type 01 class 0x060400
[    0.056075] pci 0000:03:03.0: enabling Extended Tags
[    0.056116] pci 0000:03:03.0: PME# supported from D3hot D3cold
[    0.056180] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400
[    0.056219] pci 0000:03:04.0: enabling Extended Tags
[    0.056261] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.056335] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[    0.056340] pci 0000:02:00.2:   bridge window [io  0xc000-0xdfff]
[    0.056342] pci 0000:02:00.2:   bridge window [mem 0xfe300000-0xfe4fffff]
[    0.056406] pci 0000:04:00.0: [8086:1539] type 00 class 0x020000
[    0.056449] pci 0000:04:00.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
[    0.056481] pci 0000:04:00.0: reg 0x18: [io  0xd000-0xd01f]
[    0.056497] pci 0000:04:00.0: reg 0x1c: [mem 0xfe420000-0xfe423fff]
[    0.056657] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.056792] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.056797] pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff]
[    0.056799] pci 0000:03:00.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.056853] pci 0000:05:00.0: [10ec:b822] type 00 class 0x028000
[    0.056894] pci 0000:05:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.056926] pci 0000:05:00.0: reg 0x18: [mem 0xfe300000-0xfe30ffff 64bit]
[    0.057070] pci 0000:05:00.0: supports D1 D2
[    0.057071] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.057233] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.057238] pci 0000:03:01.0:   bridge window [io  0xc000-0xcfff]
[    0.057240] pci 0000:03:01.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.057272] pci 0000:03:02.0: PCI bridge to [bus 06]
[    0.057313] pci 0000:03:03.0: PCI bridge to [bus 07]
[    0.057353] pci 0000:03:04.0: PCI bridge to [bus 08]
[    0.057909] pci 0000:09:00.0: [1022:1470] type 01 class 0x060400
[    0.057927] pci 0000:09:00.0: reg 0x10: [mem 0xfe700000-0xfe703fff]
[    0.057985] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[    0.058068] pci 0000:00:03.1: PCI bridge to [bus 09-0b]
[    0.058071] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.058073] pci 0000:00:03.1:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.058075] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.058105] pci 0000:0a:00.0: [1022:1471] type 01 class 0x060400
[    0.058177] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[    0.058239] pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
[    0.058244] pci 0000:09:00.0:   bridge window [io  0xe000-0xefff]
[    0.058246] pci 0000:09:00.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.058250] pci 0000:09:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.058280] pci 0000:0b:00.0: [1002:687f] type 00 class 0x030000
[    0.058303] pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.058312] pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.058317] pci 0000:0b:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.058323] pci 0000:0b:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
[    0.058329] pci 0000:0b:00.0: reg 0x30: [mem 0xfe680000-0xfe69ffff pref]
[    0.058339] pci 0000:0b:00.0: BAR 0: assigned to efifb
[    0.058384] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.058445] pci 0000:0b:00.1: [1002:aaf8] type 00 class 0x040300
[    0.058461] pci 0000:0b:00.1: reg 0x10: [mem 0xfe6a0000-0xfe6a3fff]
[    0.058530] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.058603] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[    0.058607] pci 0000:0a:00.0:   bridge window [io  0xe000-0xefff]
[    0.058609] pci 0000:0a:00.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.058613] pci 0000:0a:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.058939] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000
[    0.058962] pci 0000:0c:00.0: enabling Extended Tags
[    0.059022] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000
[    0.059035] pci 0000:0c:00.2: reg 0x18: [mem 0xfe100000-0xfe1fffff]
[    0.059042] pci 0000:0c:00.2: reg 0x24: [mem 0xfe200000-0xfe201fff]
[    0.059047] pci 0000:0c:00.2: enabling Extended Tags
[    0.059106] pci 0000:0c:00.3: [1022:145f] type 00 class 0x0c0330
[    0.059117] pci 0000:0c:00.3: reg 0x10: [mem 0xfe000000-0xfe0fffff 64bit]
[    0.059134] pci 0000:0c:00.3: enabling Extended Tags
[    0.059159] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[    0.059208] pci 0000:00:07.1: PCI bridge to [bus 0c]
[    0.059212] pci 0000:00:07.1:   bridge window [mem 0xfe000000-0xfe2fffff]
[    0.059917] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000
[    0.059942] pci 0000:0d:00.0: enabling Extended Tags
[    0.060004] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601
[    0.060030] pci 0000:0d:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
[    0.060037] pci 0000:0d:00.2: enabling Extended Tags
[    0.060063] pci 0000:0d:00.2: PME# supported from D3hot D3cold
[    0.060104] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300
[    0.060113] pci 0000:0d:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
[    0.060130] pci 0000:0d:00.3: enabling Extended Tags
[    0.060154] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[    0.060205] pci 0000:00:08.1: PCI bridge to [bus 0d]
[    0.060210] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.060379] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.060419] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.060452] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.060494] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.060532] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.060562] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.060592] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.060622] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.061008] ACPI: EC: interrupt unblocked
[    0.061008] ACPI: EC: event unblocked
[    0.061008] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.061008] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.061019] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[    0.061019] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.061022] pci 0000:0b:00.0: vgaarb: bridge control possible
[    0.061023] vgaarb: loaded
[    0.061090] SCSI subsystem initialized
[    0.061106] libata version 3.00 loaded.
[    0.061106] ACPI: bus type USB registered
[    0.062015] usbcore: registered new interface driver usbfs
[    0.062020] usbcore: registered new interface driver hub
[    0.062033] usbcore: registered new device driver usb
[    0.062056] pps_core: LinuxPPS API ver. 1 registered
[    0.062058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.062060] PTP clock support registered
[    0.062082] EDAC MC: Ver: 3.0.0
[    0.062119] Registered efivars operations
[    0.078201] PCI: Using ACPI for IRQ routing
[    0.081328] PCI: pci_cache_line_size set to 64 bytes
[    0.081390] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.081391] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.081391] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.081392] e820: reserve RAM buffer [mem 0xccaec018-0xcfffffff]
[    0.081392] e820: reserve RAM buffer [mem 0xccb06018-0xcfffffff]
[    0.081393] e820: reserve RAM buffer [mem 0xda044000-0xdbffffff]
[    0.081393] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.081394] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
[    0.082007] NetLabel: Initializing
[    0.082007] NetLabel:  domain hash size = 128
[    0.082007] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.082007] NetLabel:  unlabeled traffic allowed by default
[    0.082056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.082059] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.084037] clocksource: Switched to clocksource tsc-early
[    0.092055] VFS: Disk quotas dquot_6.6.0
[    0.092068] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.092109] pnp: PnP ACPI init
[    0.092206] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.092210] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.092262] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.092365] system 00:02: [io  0x02a0-0x02af] has been reserved
[    0.092367] system 00:02: [io  0x0230-0x023f] has been reserved
[    0.092369] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.092372] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092538] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.092541] system 00:03: [io  0x040b] has been reserved
[    0.092542] system 00:03: [io  0x04d6] has been reserved
[    0.092544] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.092546] system 00:03: [io  0x0c14] has been reserved
[    0.092548] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.092549] system 00:03: [io  0x0c52] has been reserved
[    0.092551] system 00:03: [io  0x0c6c] has been reserved
[    0.092553] system 00:03: [io  0x0c6f] has been reserved
[    0.092554] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.092556] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.092558] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.092559] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.092561] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.092563] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.092564] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.092566] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.092568] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.092569] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.092573] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.092575] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.092577] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.092578] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.092580] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.092582] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.092584] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.092587] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092861] pnp: PnP ACPI: found 4 devices
[    0.098328] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.098409] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.098413] pci 0000:00:01.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.098418] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.098420] pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff]
[    0.098425] pci 0000:03:00.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.098431] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.098434] pci 0000:03:01.0:   bridge window [io  0xc000-0xcfff]
[    0.098439] pci 0000:03:01.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.098446] pci 0000:03:02.0: PCI bridge to [bus 06]
[    0.098455] pci 0000:03:03.0: PCI bridge to [bus 07]
[    0.098464] pci 0000:03:04.0: PCI bridge to [bus 08]
[    0.098473] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[    0.098475] pci 0000:02:00.2:   bridge window [io  0xc000-0xdfff]
[    0.098479] pci 0000:02:00.2:   bridge window [mem 0xfe300000-0xfe4fffff]
[    0.098486] pci 0000:00:01.3: PCI bridge to [bus 02-08]
[    0.098487] pci 0000:00:01.3:   bridge window [io  0xc000-0xdfff]
[    0.098490] pci 0000:00:01.3:   bridge window [mem 0xfe300000-0xfe5fffff]
[    0.098495] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[    0.098497] pci 0000:0a:00.0:   bridge window [io  0xe000-0xefff]
[    0.098501] pci 0000:0a:00.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.098504] pci 0000:0a:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.098509] pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
[    0.098511] pci 0000:09:00.0:   bridge window [io  0xe000-0xefff]
[    0.098514] pci 0000:09:00.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.098518] pci 0000:09:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.098523] pci 0000:00:03.1: PCI bridge to [bus 09-0b]
[    0.098525] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.098528] pci 0000:00:03.1:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.098530] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.098534] pci 0000:00:07.1: PCI bridge to [bus 0c]
[    0.098537] pci 0000:00:07.1:   bridge window [mem 0xfe000000-0xfe2fffff]
[    0.098541] pci 0000:00:08.1: PCI bridge to [bus 0d]
[    0.098544] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.098549] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.098550] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.098550] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.098551] pci_bus 0000:00: resource 7 [io  0x0d00-0xefff window]
[    0.098552] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.098553] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.098554] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.098555] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.098555] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.098556] pci_bus 0000:02: resource 0 [io  0xc000-0xdfff]
[    0.098557] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe5fffff]
[    0.098558] pci_bus 0000:03: resource 0 [io  0xc000-0xdfff]
[    0.098559] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe4fffff]
[    0.098559] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.098560] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.098561] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.098562] pci_bus 0000:05: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.098563] pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
[    0.098563] pci_bus 0000:09: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.098564] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.098565] pci_bus 0000:0a: resource 0 [io  0xe000-0xefff]
[    0.098566] pci_bus 0000:0a: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.098566] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.098567] pci_bus 0000:0b: resource 0 [io  0xe000-0xefff]
[    0.098568] pci_bus 0000:0b: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.098568] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.098569] pci_bus 0000:0c: resource 1 [mem 0xfe000000-0xfe2fffff]
[    0.098570] pci_bus 0000:0d: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.098624] NET: Registered protocol family 2
[    0.098744] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    0.098813] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.099055] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.099154] TCP: Hash tables configured (established 262144 bind 65536)
[    0.099193] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.099253] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.099342] NET: Registered protocol family 1
[    0.099345] NET: Registered protocol family 44
[    0.099475] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.099482] pci 0000:0b:00.1: Linked as a consumer to 0000:0b:00.0
[    0.099564] PCI: CLS 64 bytes, default 64
[    0.099591] Unpacking initramfs...
[    0.370606] Freeing initrd memory: 28004K
[    0.370641] AMD-Vi: IOMMU performance counters supported
[    0.370850] iommu: Adding device 0000:00:01.0 to group 0
[    0.370929] iommu: Adding device 0000:00:01.1 to group 1
[    0.371015] iommu: Adding device 0000:00:01.3 to group 2
[    0.371091] iommu: Adding device 0000:00:02.0 to group 3
[    0.371175] iommu: Adding device 0000:00:03.0 to group 4
[    0.371258] iommu: Adding device 0000:00:03.1 to group 5
[    0.371335] iommu: Adding device 0000:00:04.0 to group 6
[    0.371421] iommu: Adding device 0000:00:07.0 to group 7
[    0.371513] iommu: Adding device 0000:00:07.1 to group 8
[    0.371604] iommu: Adding device 0000:00:08.0 to group 9
[    0.371681] iommu: Adding device 0000:00:08.1 to group 10
[    0.371770] iommu: Adding device 0000:00:14.0 to group 11
[    0.371783] iommu: Adding device 0000:00:14.3 to group 11
[    0.371880] iommu: Adding device 0000:00:18.0 to group 12
[    0.371894] iommu: Adding device 0000:00:18.1 to group 12
[    0.371906] iommu: Adding device 0000:00:18.2 to group 12
[    0.371918] iommu: Adding device 0000:00:18.3 to group 12
[    0.371931] iommu: Adding device 0000:00:18.4 to group 12
[    0.371943] iommu: Adding device 0000:00:18.5 to group 12
[    0.371956] iommu: Adding device 0000:00:18.6 to group 12
[    0.371968] iommu: Adding device 0000:00:18.7 to group 12
[    0.372057] iommu: Adding device 0000:01:00.0 to group 13
[    0.372153] iommu: Adding device 0000:02:00.0 to group 14
[    0.372173] iommu: Adding device 0000:02:00.1 to group 14
[    0.372194] iommu: Adding device 0000:02:00.2 to group 14
[    0.372205] iommu: Adding device 0000:03:00.0 to group 14
[    0.372216] iommu: Adding device 0000:03:01.0 to group 14
[    0.372226] iommu: Adding device 0000:03:02.0 to group 14
[    0.372238] iommu: Adding device 0000:03:03.0 to group 14
[    0.372249] iommu: Adding device 0000:03:04.0 to group 14
[    0.372267] iommu: Adding device 0000:04:00.0 to group 14
[    0.372287] iommu: Adding device 0000:05:00.0 to group 14
[    0.372378] iommu: Adding device 0000:09:00.0 to group 15
[    0.372458] iommu: Adding device 0000:0a:00.0 to group 16
[    0.372595] iommu: Adding device 0000:0b:00.0 to group 17
[    0.372647] iommu: Using direct mapping for device 0000:0b:00.0
[    0.372693] iommu: Adding device 0000:0b:00.1 to group 18
[    0.372762] iommu: Adding device 0000:0c:00.0 to group 19
[    0.372841] iommu: Adding device 0000:0c:00.2 to group 20
[    0.372916] iommu: Adding device 0000:0c:00.3 to group 21
[    0.372999] iommu: Adding device 0000:0d:00.0 to group 22
[    0.373078] iommu: Adding device 0000:0d:00.2 to group 23
[    0.373162] iommu: Adding device 0000:0d:00.3 to group 24
[    0.373352] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.373353] AMD-Vi: Extended features (0xf77ef22294ada):
[    0.373355]  PPR NX GT IA GA PC GA_vAPIC
[    0.373357] AMD-Vi: Interrupt remapping enabled
[    0.373358] AMD-Vi: Virtual APIC enabled
[    0.373425] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.374364] amd_uncore: AMD NB counters detected
[    0.374367] amd_uncore: AMD LLC counters detected
[    0.374555] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.376410] Initialise system trusted keyrings
[    0.376421] Key type blacklist registered
[    0.376444] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.377224] zbud: loaded
[    0.471366] alg: No test for 842 (842-generic)
[    0.471806] alg: No test for 842 (842-scomp)
[    0.486024] NET: Registered protocol family 38
[    0.486028] Key type asymmetric registered
[    0.486030] Asymmetric key parser 'x509' registered
[    0.486039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.486078] io scheduler mq-deadline registered
[    0.486186] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.487308] aer 0000:00:01.1:pcie002: AER enabled with IRQ 26
[    0.488262] aer 0000:00:01.3:pcie002: AER enabled with IRQ 27
[    0.489205] aer 0000:00:03.1:pcie002: AER enabled with IRQ 28
[    0.490153] aer 0000:00:07.1:pcie002: AER enabled with IRQ 29
[    0.491154] aer 0000:00:08.1:pcie002: AER enabled with IRQ 31
[    0.491919] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.491932] efifb: probing for efifb
[    0.491942] efifb: No BGRT, not showing boot graphics
[    0.491943] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.491945] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.491946] efifb: scrolling: redraw
[    0.491948] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.492001] Console: switching to colour frame buffer device 128x48
[    0.493087] fb0: EFI VGA frame buffer device
[    0.493174] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.493197] ACPI: Power Button [PWRB]
[    0.493226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.493250] ACPI: Power Button [PWRF]
[    0.493290] Monitor-Mwait will be used to enter C-1 state
[    0.494348] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.515217] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.516096] Non-volatile memory driver v1.3
[    0.516119] Linux agpgart interface v0.103
[    0.516944] ahci 0000:02:00.1: version 3.0
[    0.517018] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    0.517083] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    0.517102] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.517496] scsi host0: ahci
[    0.517592] scsi host1: ahci
[    0.517673] scsi host2: ahci
[    0.517740] scsi host3: ahci
[    0.517806] scsi host4: ahci
[    0.517870] scsi host5: ahci
[    0.517938] scsi host6: ahci
[    0.518008] scsi host7: ahci
[    0.518050] ata1: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580100 irq 44
[    0.518068] ata2: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580180 irq 44
[    0.518086] ata3: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580200 irq 44
[    0.518488] ata4: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580280 irq 44
[    0.518881] ata5: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580300 irq 44
[    0.519266] ata6: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580380 irq 44
[    0.519644] ata7: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580400 irq 44
[    0.520023] ata8: SATA max UDMA/133 abar m131072@0xfe580000 port 0xfe580480 irq 44
[    0.520505] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.520888] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.521363] scsi host8: ahci
[    0.521775] ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 46
[    0.522199] libphy: Fixed MDIO Bus: probed
[    0.522632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.523022] ehci-pci: EHCI PCI platform driver
[    0.523408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.523800] ohci-pci: OHCI PCI platform driver
[    0.524201] uhci_hcd: USB Universal Host Controller Interface driver
[    0.524654] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.525110] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    0.580752] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    0.581470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    0.581910] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.582348] usb usb1: Product: xHCI Host Controller
[    0.582780] usb usb1: Manufacturer: Linux 5.0.0-0.rc1.git0.1.fc30.x86_64 xhci-hcd
[    0.583216] usb usb1: SerialNumber: 0000:02:00.0
[    0.583702] hub 1-0:1.0: USB hub found
[    0.584145] hub 1-0:1.0: 14 ports detected
[    0.588671] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.589126] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.589544] xhci_hcd 0000:02:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[    0.589991] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.590449] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    0.590866] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.591278] usb usb2: Product: xHCI Host Controller
[    0.591680] usb usb2: Manufacturer: Linux 5.0.0-0.rc1.git0.1.fc30.x86_64 xhci-hcd
[    0.592098] usb usb2: SerialNumber: 0000:02:00.0
[    0.592552] hub 2-0:1.0: USB hub found
[    0.592964] hub 2-0:1.0: 8 ports detected
[    0.595724] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[    0.596150] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[    0.596641] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    0.597293] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    0.597719] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.598154] usb usb3: Product: xHCI Host Controller
[    0.598590] usb usb3: Manufacturer: Linux 5.0.0-0.rc1.git0.1.fc30.x86_64 xhci-hcd
[    0.599044] usb usb3: SerialNumber: 0000:0c:00.3
[    0.599552] hub 3-0:1.0: USB hub found
[    0.600008] hub 3-0:1.0: 4 ports detected
[    0.600570] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[    0.601055] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[    0.601530] xhci_hcd 0000:0c:00.3: Host supports USB 3.0  SuperSpeed
[    0.602020] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.602525] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    0.603034] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.603546] usb usb4: Product: xHCI Host Controller
[    0.604052] usb usb4: Manufacturer: Linux 5.0.0-0.rc1.git0.1.fc30.x86_64 xhci-hcd
[    0.604562] usb usb4: SerialNumber: 0000:0c:00.3
[    0.605117] hub 4-0:1.0: USB hub found
[    0.605613] hub 4-0:1.0: 4 ports detected
[    0.606195] usbcore: registered new interface driver usbserial_generic
[    0.606687] usbserial: USB Serial support registered for generic
[    0.607189] i8042: PNP: No PS/2 controller found.
[    0.607700] mousedev: PS/2 mouse device common for all mice
[    0.608269] rtc_cmos 00:01: RTC can wake from S4
[    0.608992] rtc_cmos 00:01: registered as rtc0
[    0.609473] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.610019] device-mapper: uevent: version 1.0.3
[    0.610543] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.611179] hidraw: raw HID events driver (C) Jiri Kosina
[    0.611691] usbcore: registered new interface driver usbhid
[    0.612179] usbhid: USB HID core driver
[    0.612731] drop_monitor: Initializing network drop monitor service
[    0.613395] Initializing XFRM netlink socket
[    0.613950] NET: Registered protocol family 10
[    0.616191] Segment Routing with IPv6
[    0.616682] mip6: Mobile IPv6
[    0.617159] NET: Registered protocol family 17
[    0.618266] RAS: Correctable Errors collector initialized.
[    0.618759] microcode: CPU0: patch_level=0x0800820b
[    0.619232] microcode: CPU1: patch_level=0x0800820b
[    0.619696] microcode: CPU2: patch_level=0x0800820b
[    0.620150] microcode: CPU3: patch_level=0x0800820b
[    0.620592] microcode: CPU4: patch_level=0x0800820b
[    0.621026] microcode: CPU5: patch_level=0x0800820b
[    0.621491] microcode: CPU6: patch_level=0x0800820b
[    0.621927] microcode: CPU7: patch_level=0x0800820b
[    0.622350] microcode: CPU8: patch_level=0x0800820b
[    0.622766] microcode: CPU9: patch_level=0x0800820b
[    0.623179] microcode: CPU10: patch_level=0x0800820b
[    0.623582] microcode: CPU11: patch_level=0x0800820b
[    0.623965] microcode: CPU12: patch_level=0x0800820b
[    0.624341] microcode: CPU13: patch_level=0x0800820b
[    0.624704] microcode: CPU14: patch_level=0x0800820b
[    0.625058] microcode: CPU15: patch_level=0x0800820b
[    0.625422] microcode: Microcode Update Driver: v2.2.
[    0.625428] AVX2 version of gcm_enc/dec engaged.
[    0.626115] AES CTR mode by8 optimization enabled
[    0.641027] sched_clock: Marking stable (650016446, -8992686)->(1181544775, -540521015)
[    0.641779] registered taskstats version 1
[    0.642139] Loading compiled-in X.509 certificates
[    0.663469] Loaded X.509 cert 'Fedora kernel signing key: c370e441238992d4c191c6e5f34798592a2b3b2e'
[    0.664910] zswap: loaded using pool lzo/zbud
[    0.668391] Key type big_key registered
[    0.670064] Key type encrypted registered
[    0.670929] Couldn't get size: 0x800000000000000e
[    0.671272] MODSIGN: Couldn't get UEFI db list
[    0.671888] Couldn't get size: 0x800000000000000e
[    0.672230] Couldn't get UEFI MokListRT
[    0.672830] Couldn't get size: 0x800000000000000e
[    0.673163] Couldn't get UEFI dbx list
[    0.673491] ima: No TPM chip found, activating TPM-bypass!
[    0.673829] ima: Allocated hash algorithm: sha1
[    0.674164] No architecture policies found
[    0.674763]   Magic number: 3:231:310
[    0.675120] tty tty39: hash matches
[    0.675440] pci 0000:0c:00.0: hash matches
[    0.675777] memory memory168: hash matches
[    0.676183] rtc_cmos 00:01: setting system clock to 2019-01-09T03:19:33 UTC (1547003973)
[    0.828520] ata1: SATA link down (SStatus 0 SControl 330)
[    0.829303] ata9: SATA link down (SStatus 0 SControl 300)
[    0.912846] usb 1-10: new full-speed USB device number 2 using xhci_hcd
[    0.920837] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.053707] usb 3-1: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11
[    1.054031] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.054350] usb 3-1: Product: USB2.0 Hub
[    1.054666] usb 3-1: Manufacturer: VIA Labs, Inc.
[    1.114361] hub 3-1:1.0: USB hub found
[    1.115338] hub 3-1:1.0: 4 ports detected
[    1.141398] ata2: SATA link down (SStatus 0 SControl 330)
[    1.204322] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.223344] usb 1-10: New USB device found, idVendor=0b05, idProduct=1872, bcdDevice= 2.00
[    1.223689] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.224036] usb 1-10: Product: AURA LED Controller
[    1.224385] usb 1-10: Manufacturer: AsusTek Computer Inc.
[    1.224741] usb 1-10: SerialNumber: 00000000001A
[    1.241202] hid-generic 0003:0B05:1872.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:02:00.0-10/input0
[    1.302484] usb 4-1: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.11
[    1.302933] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.303356] usb 4-1: Product: USB3.0 Hub
[    1.303778] usb 4-1: Manufacturer: VIA Labs, Inc.
[    1.322407] hub 4-1:1.0: USB hub found
[    1.323375] hub 4-1:1.0: 4 ports detected
[    1.356061] usb 1-12: new full-speed USB device number 3 using xhci_hcd
[    1.431389] tsc: Refined TSC clocksource calibration: 3693.059 MHz
[    1.432032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77744cfd5, max_idle_ns: 881590969987 ns
[    1.432663] clocksource: Switched to clocksource tsc
[    1.440687] usb 4-3: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    1.452035] ata3: SATA link down (SStatus 0 SControl 330)
[    1.455127] usb 4-3: LPM exit latency is zeroed, disabling LPM.
[    1.456663] usb 4-3: Int endpoint with wBytesPerInterval of 1024 in config 1 interface 4 altsetting 0 ep 135: setting to 262
[    1.458500] usb 4-3: New USB device found, idVendor=07ca, idProduct=0553, bcdDevice= 3.08
[    1.458963] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.459428] usb 4-3: Product: Live Gamer Ultra-Video
[    1.459891] usb 4-3: Manufacturer: AVerMedia
[    1.460354] usb 4-3: SerialNumber: 5202584700069
[    1.535020] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[    1.536630] hid-generic 0003:07CA:0553.0002: hiddev97,hidraw1: USB HID v1.11 Device [AVerMedia Live Gamer Ultra-Video] on usb-0000:0c:00.3-3/input4
[    1.587407] usb 1-12: New USB device found, idVendor=0b05, idProduct=185c, bcdDevice= 1.10
[    1.587920] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.588433] usb 1-12: Product: Bluetooth Radio 
[    1.588947] usb 1-12: Manufacturer: Realtek 
[    1.589463] usb 1-12: SerialNumber: 00e04c000001
[    1.635013] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11
[    1.635544] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.636062] usb 3-1.1: Product: USB2.0 Hub
[    1.636583] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[    1.690800] hub 3-1.1:1.0: USB hub found
[    1.691877] hub 3-1.1:1.0: 4 ports detected
[    1.738465] usb 4-1.1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[    1.768820] ata4: SATA link down (SStatus 0 SControl 330)
[    1.836251] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.11
[    1.836782] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.837310] usb 4-1.1: Product: USB3.0 Hub
[    1.837833] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[    1.866361] hub 4-1.1:1.0: USB hub found
[    1.867388] hub 4-1.1:1.0: 4 ports detected
[    1.913376] usb 3-1.2: new full-speed USB device number 4 using xhci_hcd
[    2.027378] usb 3-1.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[    2.027898] usb 3-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.028415] usb 3-1.2: Product: CSR8510 A10
[    2.080163] ata5: SATA link down (SStatus 0 SControl 330)
[    2.126700] usb 4-1.3: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[    2.225876] usb 4-1.3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.11
[    2.226384] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.226875] usb 4-1.3: Product: USB3.0 Hub
[    2.227366] usb 4-1.3: Manufacturer: VIA Labs, Inc.
[    2.250788] hub 4-1.3:1.0: USB hub found
[    2.251749] hub 4-1.3:1.0: 4 ports detected
[    2.303406] usb 3-1.1.2: new full-speed USB device number 5 using xhci_hcd
[    2.406765] usb 3-1.1.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.07
[    2.407278] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.407769] usb 3-1.1.2: Product: USB Receiver
[    2.408248] usb 3-1.1.2: Manufacturer: Logitech
[    2.477379] usb 3-1.3: new high-speed USB device number 6 using xhci_hcd
[    2.543049] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.552190] ata6.00: ATA-9: HGST HUH721212ALE604, LEGNW3D0, max UDMA/133
[    2.552683] ata6.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.562914] ata6.00: configured for UDMA/133
[    2.563695] scsi 5:0:0:0: Direct-Access     ATA      HGST HUH721212AL W3D0 PQ: 0 ANSI: 5
[    2.564515] sd 5:0:0:0: Attached scsi generic sg0 type 0
[    2.564567] sd 5:0:0:0: [sda] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[    2.565873] sd 5:0:0:0: [sda] 4096-byte physical blocks
[    2.566468] sd 5:0:0:0: [sda] Write Protect is off
[    2.566951] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.566969] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.580567] sd 5:0:0:0: [sda] Attached SCSI disk
[    2.590253] usb 3-1.3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11
[    2.590726] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.591201] usb 3-1.3: Product: USB2.0 Hub
[    2.591668] usb 3-1.3: Manufacturer: VIA Labs, Inc.
[    2.650793] hub 3-1.3:1.0: USB hub found
[    2.651878] hub 3-1.3:1.0: 4 ports detected
[    2.693173] usb 4-1.4: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[    2.791500] usb 4-1.4: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.11
[    2.791972] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.792441] usb 4-1.4: Product: USB3.0 Hub
[    2.792907] usb 4-1.4: Manufacturer: VIA Labs, Inc.
[    2.810293] hub 4-1.4:1.0: USB hub found
[    2.811127] hub 4-1.4:1.0: 4 ports detected
[    2.877147] ata7: SATA link down (SStatus 0 SControl 330)
[    2.909379] usb 3-1.1.3: new low-speed USB device number 7 using xhci_hcd
[    3.054630] usb 3-1.1.3: New USB device found, idVendor=046d, idProduct=c326, bcdDevice=79.00
[    3.055094] usb 3-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.055549] usb 3-1.1.3: Product: USB Keyboard
[    3.056002] usb 3-1.1.3: Manufacturer: Logitech
[    3.126823] usb 3-1.4: new high-speed USB device number 8 using xhci_hcd
[    3.136671] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.0/0003:046D:C326.0006/input/input2
[    3.188085] ata8: SATA link down (SStatus 0 SControl 330)
[    3.189152] hid-generic 0003:046D:C326.0006: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:0c:00.3-1.1.3/input0
[    3.190579] Freeing unused decrypted memory: 2040K
[    3.191365] Freeing unused kernel image memory: 2200K
[    3.194421] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.1/0003:046D:C326.0007/input/input3
[    3.198017] Write protecting the kernel read-only data: 20480k
[    3.199041] Freeing unused kernel image memory: 2020K
[    3.199910] Freeing unused kernel image memory: 2012K
[    3.206956] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.207482] rodata_test: all tests were successful
[    3.208001] Run /init as init process
[    3.229006] usb 3-1.4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11
[    3.231203] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.233372] usb 3-1.4: Product: USB2.0 Hub
[    3.235363] usb 3-1.4: Manufacturer: VIA Labs, Inc.
[    3.247078] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.1/0003:046D:C326.0007/input/input4
[    3.251535] hid-generic 0003:046D:C326.0007: input,hiddev98,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:0c:00.3-1.1.3/input1
[    3.252736] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.266037] systemd[1]: Detected architecture x86-64.
[    3.266724] systemd[1]: Running in initial RAM disk.
[    3.279996] systemd[1]: Set hostname to <localhost.localdomain>.
[    3.290397] hub 3-1.4:1.0: USB hub found
[    3.291374] hub 3-1.4:1.0: 4 ports detected
[    3.306015] usb 3-1.3.3: new full-speed USB device number 9 using xhci_hcd
[    3.311327] systemd[1]: Reached target Timers.
[    3.312695] systemd[1]: Listening on Journal Socket.
[    3.316557] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.317960] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    3.318664] systemd[1]: Listening on udev Kernel Socket.
[    3.320062] systemd[1]: Listening on udev Control Socket.
[    3.372601] audit: type=1130 audit(1547003976.195:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.373822] audit: type=1131 audit(1547003976.195:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.376496] audit: type=1130 audit(1547003976.199:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.406254] usb 3-1.3.3: New USB device found, idVendor=054c, idProduct=09cc, bcdDevice= 1.00
[    3.406918] usb 3-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.407568] usb 3-1.3.3: Product: Wireless Controller
[    3.407571] usb 3-1.3.3: Manufacturer: Sony Interactive Entertainment
[    3.409478] audit: type=1130 audit(1547003976.232:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.424190] audit: type=1130 audit(1547003976.247:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.437340] audit: type=1130 audit(1547003976.260:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.492284] input: Sony Interactive Entertainment Wireless Controller Touchpad as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.3/0003:054C:09CC.0008/input/input6
[    3.493899] input: Sony Interactive Entertainment Wireless Controller Motion Sensors as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.3/0003:054C:09CC.0008/input/input7
[    3.502186] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    3.503591] audit: type=1130 audit(1547003976.326:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.511336] nvme nvme0: pci function 0000:01:00.0
[    3.521635] audit: type=1130 audit(1547003976.344:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.539345] dca service started, version 1.12.1
[    3.547065] input: Sony Interactive Entertainment Wireless Controller as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.3/0003:054C:09CC.0008/input/input5
[    3.548781] sony 0003:054C:09CC.0008: input,hidraw4: USB HID v81.11 Gamepad [Sony Interactive Entertainment Wireless Controller] on usb-0000:0c:00.3-1.3.3/input3
[    3.551607] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    3.552478] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.557255] logitech-djreceiver 0003:046D:C52B.0005: hiddev99,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0c:00.3-1.1.2/input2
[    3.563748] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.568018] usb 3-1.3.4: new high-speed USB device number 10 using xhci_hcd
[    3.580406] pps pps0: new PPS source ptp0
[    3.581301] igb 0000:04:00.0: added PHC on eth0
[    3.582128] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[    3.582958] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 4c:ed:fb:75:5b:ab
[    3.583776] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
[    3.584574] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    3.586204] igb 0000:04:00.0 enp4s0: renamed from eth0
[    3.665252] usb 3-1.3.4: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 2.32
[    3.666054] usb 3-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.666848] usb 3-1.3.4: Product: Nexus 5
[    3.667634] usb 3-1.3.4: Manufacturer: LGE
[    3.668405] usb 3-1.3.4: SerialNumber: 07606f5400e1b31a
[    3.687630] input: Logitech Unifying Device. Wireless PID:4026 Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.2/0003:046D:C52B.0005/0003:046D:4026.0009/input/input8
[    3.690165] input: Logitech Unifying Device. Wireless PID:4026 Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.2/0003:046D:C52B.0005/0003:046D:4026.0009/input/input9
[    3.692891] input: Logitech Unifying Device. Wireless PID:4026 Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.2/0003:046D:C52B.0005/0003:046D:4026.0009/input/input10
[    3.695051] hid-generic 0003:046D:4026.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4026] on usb-0000:0c:00.3-1.1.2:1
[    3.719667] nvme nvme0: 16/0/0 default/read/poll queues
[    3.722066] [drm] amdgpu kernel modesetting enabled.
[    3.722886] Parsing CRAT table with 1 nodes
[    3.723579]  nvme0n1: p1 p2 p3
[    3.723741] Ignoring ACPI CRAT on non-APU system
[    3.725282] Virtual CRAT table created for CPU
[    3.726020] Parsing CRAT table with 1 nodes
[    3.726741] Creating topology SYSFS entries
[    3.727461] Topology: Add CPU node
[    3.728157] Finished initializing topology
[    3.728916] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    3.728917] fb0: switching to amdgpudrmfb from EFI VGA
[    3.729610] Console: switching to colour dummy device 80x25
[    3.729828] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1458:0x2308 0xC1).
[    3.729838] [drm] register mmio base: 0xFE600000
[    3.729839] [drm] register mmio size: 524288
[    3.729846] [drm] add ip block number 0 <soc15_common>
[    3.729847] [drm] add ip block number 1 <gmc_v9_0>
[    3.729849] [drm] add ip block number 2 <vega10_ih>
[    3.729850] [drm] add ip block number 3 <psp>
[    3.729851] [drm] add ip block number 4 <gfx_v9_0>
[    3.729853] [drm] add ip block number 5 <sdma_v4_0>
[    3.729854] [drm] add ip block number 6 <powerplay>
[    3.729856] [drm] add ip block number 7 <dm>
[    3.729857] [drm] add ip block number 8 <uvd_v7_0>
[    3.729858] [drm] add ip block number 9 <vce_v4_0>
[    3.729906] [drm] UVD(0) is enabled in VM mode
[    3.729907] [drm] UVD(0) ENC is enabled in VM mode
[    3.729909] [drm] VCE enabled in VM mode
[    3.729923] amdgpu 0000:0b:00.0: No more image in the PCI ROM
[    3.729940] ATOM BIOS: xxx-xxx-xxx
[    3.729958] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.729966] amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
[    3.729969] amdgpu 0000:0b:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    3.729971] amdgpu 0000:0b:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    3.729976] [drm] Detected VRAM RAM=8176M, BAR=256M
[    3.729977] [drm] RAM width 2048bits HBM
[    3.730038] [TTM] Zone  kernel: Available graphics memory: 16463198 kiB
[    3.730040] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.730041] [TTM] Initializing pool allocator
[    3.730044] [TTM] Initializing DMA pool allocator
[    3.730067] [drm] amdgpu: 8176M of VRAM memory ready
[    3.730069] [drm] amdgpu: 8176M of GTT memory ready.
[    3.730080] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.730183] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000).
[    3.731424] [drm] use_doorbell being set to: [true]
[    3.731462] [drm] use_doorbell being set to: [true]
[    3.731608] [drm] Found UVD firmware Version: 1.87 Family ID: 17
[    3.731612] [drm] PSP loading UVD firmware
[    3.732031] [drm] Found VCE firmware Version: 55.3 Binary ID: 4
[    3.732036] [drm] PSP loading VCE firmware
[    3.745948] PM: Image not found (code -22)
[    3.746538] audit: type=1130 audit(1547003976.569:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-c1820a2a\x2d10ac\x2d4ff7\x2da086\x2de73a4fc14c2d comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.879736] [drm] reserve 0x400000 from 0xf400d00000 for PSP TMR SIZE
[    3.942458] input: Logitech T400 as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.2/0003:046D:C52B.0005/0003:046D:4026.0009/input/input14
[    3.942556] logitech-hidpp-device 0003:046D:4026.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:0c:00.3-1.1.2:1
[    3.967041] [drm] Display Core initialized with v3.2.08!
[    3.998442] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.998444] [drm] Driver supports precise vblank timestamp query.
[    4.019711] [drm] UVD and UVD ENC initialized successfully.
[    4.120351] [drm] VCE initialized successfully.
[    4.121917] kfd kfd: Allocated 3969056 bytes on gart
[    4.121937] Virtual CRAT table created for GPU
[    4.121939] Parsing CRAT table with 1 nodes
[    4.121948] Creating topology SYSFS entries
[    4.122027] Topology: Add dGPU node [0x687f:0x1002]
[    4.122090] kfd kfd: added device 1002:687f
[    4.126032] [drm] fb mappable at 0xE1100000
[    4.126034] [drm] vram apper at 0xE0000000
[    4.126035] [drm] size 33177600
[    4.126036] [drm] fb depth is 24
[    4.126037] [drm]    pitch is 15360
[    4.126078] fbcon: amdgpudrmfb (fb0) is primary device
[    4.150583] Console: switching to colour frame buffer device 480x135
[    4.177828] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device
[    4.183061] amdgpu 0000:0b:00.0: ring gfx uses VM inv eng 0 on hub 0
[    4.183062] amdgpu 0000:0b:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    4.183063] amdgpu 0000:0b:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    4.183064] amdgpu 0000:0b:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    4.183065] amdgpu 0000:0b:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    4.183066] amdgpu 0000:0b:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    4.183066] amdgpu 0000:0b:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    4.183067] amdgpu 0000:0b:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    4.183068] amdgpu 0000:0b:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    4.183069] amdgpu 0000:0b:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    4.183069] amdgpu 0000:0b:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[    4.183070] amdgpu 0000:0b:00.0: ring sdma1 uses VM inv eng 1 on hub 1
[    4.183071] amdgpu 0000:0b:00.0: ring uvd_0 uses VM inv eng 4 on hub 1
[    4.183072] amdgpu 0000:0b:00.0: ring uvd_enc_0.0 uses VM inv eng 5 on hub 1
[    4.183072] amdgpu 0000:0b:00.0: ring uvd_enc_0.1 uses VM inv eng 6 on hub 1
[    4.183073] amdgpu 0000:0b:00.0: ring vce0 uses VM inv eng 7 on hub 1
[    4.183074] amdgpu 0000:0b:00.0: ring vce1 uses VM inv eng 8 on hub 1
[    4.183075] amdgpu 0000:0b:00.0: ring vce2 uses VM inv eng 9 on hub 1
[    4.183121] [drm] ECC is not present.
[    4.184003] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:0b:00.0 on minor 0
[    4.254394] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.547610] systemd-journald[383]: Received SIGTERM from PID 1 (systemd).
[    4.556613] printk: systemd: 18 output lines suppressed due to ratelimiting
[    4.806110] SELinux:  Class xdp_socket not defined in policy.
[    4.806128] SELinux: the above unknown classes and permissions will be allowed
[    4.806144] SELinux:  policy capability network_peer_controls=1
[    4.806156] SELinux:  policy capability open_perms=1
[    4.806167] SELinux:  policy capability extended_socket_class=1
[    4.806179] SELinux:  policy capability always_check_network=0
[    4.806192] SELinux:  policy capability cgroup_seclabel=1
[    4.806203] SELinux:  policy capability nnp_nosuid_transition=1
[    4.821811] systemd[1]: Successfully loaded SELinux policy in 252.127ms.
[    4.845410] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 18.767ms.
[    4.846164] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.858037] systemd[1]: Detected architecture x86-64.
[    4.858699] systemd[1]: Set hostname to <localhost.localdomain>.
[    4.881097] systemd[1]: /usr/lib/systemd/system/auditd.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
[    4.886897] systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly.
[    4.887353] systemd[1]: /usr/lib/systemd/system/rpc-statd.service:14: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    4.888977] systemd[1]: /usr/lib/systemd/system/nfs-blkmap.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/blkmapd.pid → /run/blkmapd.pid; please update the unit file accordingly.
[    4.891906] systemd[1]: /usr/lib/systemd/system/chronyd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid → /run/chrony/chronyd.pid; please update the unit file accordingly.
[    4.897025] systemd[1]: /usr/lib/systemd/system/mdmonitor.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/mdadm/mdadm.pid → /run/mdadm/mdadm.pid; please update the unit file accordingly.
[    4.897394] systemd[1]: /usr/lib/systemd/system/iscsid.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly.
[    4.944932] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null)
[    4.996626] systemd-journald[667]: Received request to flush runtime journal from PID 1
[    5.075315] acpi_cpufreq: overriding BIOS provided _PSD data
[    5.100252] kauditd_printk_skb: 47 callbacks suppressed
[    5.100253] audit: type=1130 audit(1547003977.923:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.139588] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    5.139614] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    5.140009] ccp 0000:0c:00.2: enabling device (0000 -> 0002)
[    5.140258] ccp 0000:0c:00.2: psp initialization failed
[    5.140279] ccp 0000:0c:00.2: enabled
[    5.141840] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.141970] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    5.142020] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    5.168086] Adding 67108860k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:67108860k SSFS
[    5.178751] media: Linux media interface: v0.10
[    5.188858] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.189604] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.195400] videodev: Linux video capture interface: v2.00
[    5.216790] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
[    5.216937] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002)
[    5.217767] Bluetooth: Core ver 2.22
[    5.217800] NET: Registered protocol family 31
[    5.217818] Bluetooth: HCI device and connection manager initialized
[    5.217839] Bluetooth: HCI socket layer initialized
[    5.217855] Bluetooth: L2CAP socket layer initialized
[    5.217874] Bluetooth: SCO socket layer initialized
[    5.218031] uvcvideo: Unknown video format 30313050-0000-0010-8000-00aa00389b71
[    5.218517] uvcvideo: Found UVC 1.00 device Live Gamer Ultra-Video (07ca:0553)
[    5.227200] usbcore: registered new interface driver btusb
[    5.230473] Bluetooth: hci0: RTL: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822

[    5.230525] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input15
[    5.230641] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input16
[    5.230718] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input17
[    5.230800] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input18
[    5.230906] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input19
[    5.230980] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input20
[    5.233467] Bluetooth: hci0: RTL: rom_version status=0 version=2

[    5.233498] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_fw.bin

[    5.233657] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_config.bin

[    5.233726] Bluetooth: hci0: RTL: cfg_sz 14, total sz 20270

[    5.248558] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.248613] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.248652] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.248689] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.248723] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.248752] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    5.248783] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    5.248813] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.254140] asus_wmi: ASUS WMI generic driver loaded
[    5.255714] asus_wmi: Initialization: 0x0
[    5.255768] asus_wmi: BIOS WMI version: 0.9
[    5.255830] asus_wmi: SFUN value: 0x0
[    5.256230] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input21
[    5.256356] asus_wmi: Number of fans: 1
[    5.261239] uvcvideo 4-3:1.0: Entity type for entity Extension 3 was not initialized!
[    5.261272] uvcvideo 4-3:1.0: Entity type for entity Processing 2 was not initialized!
[    5.261302] uvcvideo 4-3:1.0: Entity type for entity Camera 1 was not initialized!
[    5.261380] input: Live Gamer Ultra-Video: Live Ga as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb4/4-3/4-3:1.0/input/input23
[    5.261528] usbcore: registered new interface driver uvcvideo
[    5.261549] USB Video Class driver (1.1.1)
[    5.264995] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input22
[    5.267648] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input24
[    5.270237] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input25
[    5.273005] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input26
[    5.276944] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input27
[    5.285944] r8822be: module is from the staging directory, the quality is unknown, you have been warned.
[    5.295115] r8822be 0000:05:00.0: enabling device (0000 -> 0003)
[    5.314755] r8822be: Using firmware rtlwifi/rtl8822befw.bin
[    5.316960] kvm: Nested Virtualization enabled
[    5.319573] kvm: Nested Paging enabled
[    5.322652] SVM: Virtual VMLOAD VMSAVE supported
[    5.322654] SVM: Virtual GIF supported
[    5.332782] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    5.333297] r8822be: rtlwifi: wireless switch is on
[    5.343550] MCE: In-kernel MCE decoding enabled.
[    5.346683] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.346685] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.346836] r8822be 0000:05:00.0 wlp5s0: renamed from wlan0
[    5.365615] audit: type=1400 audit(1547003978.188:59): avc:  denied  { read } for  pid=929 comm="systemd-rfkill" name="pci-0000:05:00.0:wlan" dev="nvme0n1p2" ino=2883639 scontext=system_u:system_r:systemd_rfkill_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file permissive=0
[    5.385765] audit: type=1130 audit(1547003978.208:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.390179] audit: type=1130 audit(1547003978.213:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.393874] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.395823] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.424771] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.428463] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.454453] usbcore: registered new interface driver snd-usb-audio
[    5.458284] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.461854] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.485733] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.489400] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    6.474632] audit: type=1130 audit(1547003979.297:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.532952] audit: type=1130 audit(1547003979.355:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.536763] audit: type=1131 audit(1547003979.355:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.560705] audit: type=1130 audit(1547003979.383:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-A3EC\x2dCD5A comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.617625] SGI XFS with ACLs, security attributes, scrub, no debug enabled
[    6.621832] XFS (sda): Mounting V5 Filesystem
[    6.757614] XFS (sda): Ending clean mount
[    6.881426] audit: type=1130 audit(1547003979.704:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.893066] audit: type=1130 audit(1547003979.716:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.964577] RPC: Registered named UNIX socket transport module.
[    6.966700] RPC: Registered udp transport module.
[    6.968792] RPC: Registered tcp transport module.
[    6.970882] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.063604] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.065893] Bluetooth: BNEP filters: protocol multicast
[    7.065899] Bluetooth: BNEP socket layer initialized
[    7.327612] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    7.354832] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    7.362225] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   10.376516] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   10.479213] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   11.230729] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   11.237302] tun: Universal TUN/TAP device driver, 1.6
[   11.238516] virbr0: port 1(virbr0-nic) entered blocking state
[   11.238520] virbr0: port 1(virbr0-nic) entered disabled state
[   11.238573] device virbr0-nic entered promiscuous mode
[   11.306474] virbr0: port 1(virbr0-nic) entered blocking state
[   11.306480] virbr0: port 1(virbr0-nic) entered listening state
[   11.328900] virbr0: port 1(virbr0-nic) entered disabled state
[   17.297274] Bluetooth: RFCOMM TTY layer initialized
[   17.297281] Bluetooth: RFCOMM socket layer initialized
[   17.297310] Bluetooth: RFCOMM ver 1.11
[   18.109780] fuse init (API version 7.28)
[   22.812407] logitech-hidpp-device 0003:046D:4026.0009: HID++ 2.0 device connected.
[   24.054150] rfkill: input handler disabled
[  269.562008] uvcvideo: Non-zero status (-71) in video completion handler.
[ 1269.436579] uvcvideo: Non-zero status (-71) in video completion handler.
[ 1609.402651] uvcvideo: Non-zero status (-71) in video completion handler.

  reply	other threads:[~2019-01-09  3:51 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-05 20:05 Kernel error "Unknown pixelformat 0x00000000" occurs when I start capture video Mikhail Gavrilov
2019-01-08 14:45 ` Mauro Carvalho Chehab
2019-01-08 14:54   ` Laurent Pinchart
2019-01-08 15:16     ` Mauro Carvalho Chehab
2019-01-08 15:55       ` Laurent Pinchart
2019-01-08 15:18     ` Mikhail Gavrilov
2019-01-08 15:58       ` Laurent Pinchart
2019-01-08 16:11         ` Mikhail Gavrilov
2019-01-08 18:49           ` Mauro Carvalho Chehab
2019-01-08 19:00             ` Mauro Carvalho Chehab
2019-01-09  3:51               ` Mikhail Gavrilov [this message]
2019-01-09 12:03                 ` Mauro Carvalho Chehab
2019-01-08 21:29             ` Laurent Pinchart
2019-01-09 12:19             ` Sakari Ailus
2019-01-09 13:01               ` P010 fourcc format support - Was: " Mauro Carvalho Chehab
2019-01-09 16:42                 ` Ayaka
2019-01-09 16:52                   ` Nicolas Dufresne
2019-01-09 17:28                     ` Mauro Carvalho Chehab
2019-01-09 18:20                       ` Nicolas Dufresne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CABXGCsPJJfu7fwVnx3ovHTDF-rBFrUqmc7dqF+R-Q-NE2vmn5w@mail.gmail.com \
    --to=mikhail.v.gavrilov@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab+samsung@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).