linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Peter Enderborg <peter.enderborg@sony.com>
Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	"Sumit Semwal" <sumit.semwal@linaro.org>,
	"Christian König" <christian.koenig@amd.com>,
	"Alexey Dobriyan" <adobriyan@gmail.com>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Muchun Song" <songmuchun@bytedance.com>,
	"Roman Gushchin" <guro@fb.com>,
	"Shakeel Butt" <shakeelb@google.com>,
	"Michal Hocko" <mhocko@suse.com>, NeilBrown <neilb@suse.de>,
	"Sami Tolvanen" <samitolvanen@google.com>,
	"Mike Rapoport" <rppt@kernel.org>,
	linux-media@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linaro-mm-sig@lists.linaro.org,
	"Matthew Wilcox" <willy@infradead.org>
Subject: Re: [PATCH v5] dma-buf: Add DmaBufTotal counter in meminfo
Date: Tue, 20 Apr 2021 10:58:39 +0200	[thread overview]
Message-ID: <YH6Xv00ddYfMA3Lg@phenom.ffwll.local> (raw)
In-Reply-To: <20210417163835.25064-1-peter.enderborg@sony.com>

On Sat, Apr 17, 2021 at 06:38:35PM +0200, Peter Enderborg wrote:
> This adds a total used dma-buf memory. Details
> can be found in debugfs, however it is not for everyone
> and not always available. dma-buf are indirect allocated by
> userspace. So with this value we can monitor and detect
> userspace applications that have problems.
> 
> Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>

So there have been tons of discussions around how to track dma-buf and
why, and I really need to understand the use-cass here first I think. proc
uapi is as much forever as anything else, and depending what you're doing
this doesn't make any sense at all:

- on most linux systems dma-buf are only instantiated for shared buffer.
  So there this gives you a fairly meaningless number and not anything
  reflecting gpu memory usage at all.

- on Android all buffers are allocated through dma-buf afaik. But there
  we've recently had some discussions about how exactly we should track
  all this, and the conclusion was that most of this should be solved by
  cgroups long term. So if this is for Android, then I don't think adding
  random quick stop-gaps to upstream is a good idea (because it's a pretty
  long list of patches that have come up on this).

So what is this for?
-Daniel

> ---
>  drivers/dma-buf/dma-buf.c | 12 ++++++++++++
>  fs/proc/meminfo.c         |  5 ++++-
>  include/linux/dma-buf.h   |  1 +
>  3 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> index f264b70c383e..4dc37cd4293b 100644
> --- a/drivers/dma-buf/dma-buf.c
> +++ b/drivers/dma-buf/dma-buf.c
> @@ -37,6 +37,7 @@ struct dma_buf_list {
>  };
>  
>  static struct dma_buf_list db_list;
> +static atomic_long_t dma_buf_global_allocated;
>  
>  static char *dmabuffs_dname(struct dentry *dentry, char *buffer, int buflen)
>  {
> @@ -79,6 +80,7 @@ static void dma_buf_release(struct dentry *dentry)
>  	if (dmabuf->resv == (struct dma_resv *)&dmabuf[1])
>  		dma_resv_fini(dmabuf->resv);
>  
> +	atomic_long_sub(dmabuf->size, &dma_buf_global_allocated);
>  	module_put(dmabuf->owner);
>  	kfree(dmabuf->name);
>  	kfree(dmabuf);
> @@ -586,6 +588,7 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info)
>  	mutex_lock(&db_list.lock);
>  	list_add(&dmabuf->list_node, &db_list.head);
>  	mutex_unlock(&db_list.lock);
> +	atomic_long_add(dmabuf->size, &dma_buf_global_allocated);
>  
>  	return dmabuf;
>  
> @@ -1346,6 +1349,15 @@ void dma_buf_vunmap(struct dma_buf *dmabuf, struct dma_buf_map *map)
>  }
>  EXPORT_SYMBOL_GPL(dma_buf_vunmap);
>  
> +/**
> + * dma_buf_allocated_pages - Return the used nr of pages
> + * allocated for dma-buf
> + */
> +long dma_buf_allocated_pages(void)
> +{
> +	return atomic_long_read(&dma_buf_global_allocated) >> PAGE_SHIFT;
> +}
> +
>  #ifdef CONFIG_DEBUG_FS
>  static int dma_buf_debug_show(struct seq_file *s, void *unused)
>  {
> diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
> index 6fa761c9cc78..ccc7c40c8db7 100644
> --- a/fs/proc/meminfo.c
> +++ b/fs/proc/meminfo.c
> @@ -16,6 +16,7 @@
>  #ifdef CONFIG_CMA
>  #include <linux/cma.h>
>  #endif
> +#include <linux/dma-buf.h>
>  #include <asm/page.h>
>  #include "internal.h"
>  
> @@ -145,7 +146,9 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
>  	show_val_kb(m, "CmaFree:        ",
>  		    global_zone_page_state(NR_FREE_CMA_PAGES));
>  #endif
> -
> +#ifdef CONFIG_DMA_SHARED_BUFFER
> +	show_val_kb(m, "DmaBufTotal:    ", dma_buf_allocated_pages());
> +#endif
>  	hugetlb_report_meminfo(m);
>  
>  	arch_report_meminfo(m);
> diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
> index efdc56b9d95f..5b05816bd2cd 100644
> --- a/include/linux/dma-buf.h
> +++ b/include/linux/dma-buf.h
> @@ -507,4 +507,5 @@ int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
>  		 unsigned long);
>  int dma_buf_vmap(struct dma_buf *dmabuf, struct dma_buf_map *map);
>  void dma_buf_vunmap(struct dma_buf *dmabuf, struct dma_buf_map *map);
> +long dma_buf_allocated_pages(void);
>  #endif /* __DMA_BUF_H__ */
> -- 
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

  reply	other threads:[~2021-04-20  8:58 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-17 16:38 [PATCH v5] dma-buf: Add DmaBufTotal counter in meminfo Peter Enderborg
2021-04-20  8:58 ` Daniel Vetter [this message]
2021-04-20  9:26   ` Peter.Enderborg
2021-04-20  9:41     ` Mike Rapoport
2021-04-20 10:45       ` Peter.Enderborg
2021-04-20 11:52         ` Mike Rapoport
2021-04-20 12:03           ` Peter.Enderborg
2021-04-20 11:14     ` Daniel Vetter
2021-04-20 11:37       ` Peter.Enderborg
2021-04-21  9:15         ` Daniel Vetter
2021-04-21 10:37           ` Peter.Enderborg
2021-04-21 10:57             ` Michal Hocko
2021-04-21 13:05             ` Pekka Paalanen
2021-04-21 15:31             ` Mike Rapoport
2021-04-21 17:35               ` Peter.Enderborg
2021-04-22  8:06                 ` Mike Rapoport
2021-04-22 14:08                   ` Peter.Enderborg
2021-04-25  7:33                     ` Mike Rapoport
2021-04-25  8:40                       ` Peter.Enderborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YH6Xv00ddYfMA3Lg@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=adobriyan@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=christian.koenig@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=guro@fb.com \
    --cc=linaro-mm-sig@lists.linaro.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mhocko@suse.com \
    --cc=neilb@suse.de \
    --cc=peter.enderborg@sony.com \
    --cc=rppt@kernel.org \
    --cc=samitolvanen@google.com \
    --cc=shakeelb@google.com \
    --cc=songmuchun@bytedance.com \
    --cc=sumit.semwal@linaro.org \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).