Hi, On Wed 26 May 21, 14:00, Hans Verkuil wrote: > Hi Paul, > > On 15/01/2021 21:01, Paul Kocialkowski wrote: > > This series introduces support for MIPI CSI-2, with the A31 controller that is > > found on most SoCs (A31, V3s and probably V5) as well as the A83T-specific > > controller. While the former uses the same MIPI D-PHY that is already supported > > for DSI, the latter embeds its own D-PHY. > > > > In order to distinguish the use of the D-PHY between Rx mode (for MIPI CSI-2) > > and Tx mode (for MIPI DSI), a submode is introduced for D-PHY in the PHY API. > > This allows adding Rx support in the A31 D-PHY driver. > > > > A few changes and fixes are applied to the A31 CSI controller driver, in order > > to support the MIPI CSI-2 use-case. > > Besides the compile error for patch 2/16, I also get several other compile errors: > > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c: In function ‘sun6i_csi_v4l2_fwnode_init’: > ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token > 207 | ((type *) \ > | ^ > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:790:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’ > 790 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token > 207 | ((type *) \ > | ^ > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:811:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’ > 811 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > make[5]: *** [scripts/Makefile.build:272: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o] Error 1 > make[5]: *** Waiting for unfinished jobs.... > make[4]: *** [scripts/Makefile.build:272: drivers/media/platform/rockchip/rkisp1/rkisp1-isp.o] Error 1 > make[3]: *** [scripts/Makefile.build:515: drivers/media/platform/rockchip/rkisp1] Error 2 > make[3]: *** Waiting for unfinished jobs.... > In file included from ./include/media/v4l2-subdev.h:14, > from ./include/media/v4l2-device.h:13, > from drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:19: > drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c: In function ‘sun8i_a83t_mipi_csi2_v4l2_setup’: > ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token > 207 | ((type *) \ > | ^ > drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:495:8: note: in expansion of macro > ‘v4l2_async_notifier_add_fwnode_remote_subdev’ > 495 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > In file included from ./include/media/v4l2-subdev.h:14, > from ./include/media/v4l2-device.h:13, > from drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:18: > drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c: In function ‘sun6i_mipi_csi2_v4l2_setup’: > ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token > 207 | ((type *) \ > | ^ > drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:437:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’ > 437 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle, > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Can you rebase this series? Thanks for letting me know, I'll look into this for the next iteration. > I also need Acked-by's for patches 1-3 from one of the PHY maintainers, but as > you mentioned this might need to change as well. > > Was there a reason why I haven't looked at this before? It's quite an old series, > usually I don't wait for so long. If it was because I was really slow, then I > apologize and please kick me sooner if you see a review like this take so long. I'm not sure, but Sakari definitely went over previous interations and made various comments,so the series definitely hasn't gone unreviewed! To be honest I also lost momentum on this but I'll be trying to finalize the series soon, once the discussion on rx/tx handling has concluded. Cheers, Paul > > Regards, > > Hans > > > > > Changes since v4: > > - Added patch to stop using v4l2_async_notifier_parse_fwnode_endpoints; > > - Fixed checkpatch strict issues (parenthesis alignment); > > - Fixed runtime PM call order and disable; > > - Fixed fwnode_handle_put order; > > - Brought back phy-names for A31 since it's mandatory according to the generic > > PHY binding and needed by the code; > > - Added collected tags. > > > > Changes since v3: > > - Fixed single-item phys description in sun6i mipi csi-2 binding; > > - Fixed variables names in macros using container_of; > > - Fixed style issue with operators at the end of lines; > > - Reworked source endpoint/subdev assignment in sun6i-csi to handle > > link_validate error case; > > - Removed unrelated dt change in sun8i-a83t mipi csi-2 driver; > > - Added collected tags. > > > > Changes since v2: > > - added Kconfig depend on PM since it's not optional; > > - removed phy-names for A31 MIPI CSI-2 controller; > > - removed v3s compatible in the A31 MIPI CSI-2 controller driver; > > - removed A31 CSI controller single-port binding deprecation; > > - removed empty dt port definitions; > > - fixed minor checkpatch warnings; > > - added collected tags; > > - added media-ctl output in cover letter. > > > > Changes since v1: > > - reworked fwnode and media graph on the CSI controller end to have one port > > per interface, which solves the bus type representation issue; > > - removed unused IRQ handlers in the MIPI CSI-2 bridges; > > - avoided the use of devm_regmap_init_mmio_clk; > > - deasserted reset before enabling clocks; > > - fixed reported return code issues (ret |=, missing checks); > > - applied requested cosmetic changes (backward goto, etc); > > - switched over to runtime PM for the mipi csi-2 bridge drivers; > > - selected PHY_SUN6I_MIPI_DPHY in Kconfig for sun6i-mipi-csi2; > > - registered nodes with mipi csi-2 bridge subdevs; > > - used V4L2 format info instead of switch/case for sun6i-csi bpp; > > - fixed device-tree bindings as requested (useless properties, license); > > - fixed mipi bridge dt instances names; > > - added PHY API documentation about mode/power on order requirement; > > - fixed clock error return code in d-phy code; > > - fixed D-PHY mode check in d-phy code; > > - added MAINTAINERS entries for the new drivers; > > - added V4L2 compliance results; > > - added various comments and rework commit mesages as requested. > > > > Media ctl outputs for the testing setups are available below: > > > > # sun6i-csi + sun6i-mipi-csi2 + ov5648 > > > > Media device information > > ------------------------ > > driver sun6i-csi > > model Allwinner Video Capture Device > > serial > > bus info platform:1cb0000.camera > > hw revision 0x0 > > driver version 5.10.0 > > > > Device topology > > - entity 1: sun6i-csi (2 pads, 1 link) > > type Node subtype V4L flags 0 > > device node name /dev/video0 > > pad0: Sink > > pad1: Sink > > <- "sun6i-mipi-csi2":1 [ENABLED] > > > > - entity 6: sun6i-mipi-csi2 (2 pads, 2 links) > > type V4L2 subdev subtype Unknown flags 0 > > device node name /dev/v4l-subdev0 > > pad0: Sink > > [fmt:unknown/0x0] > > <- "ov5648 0-0036":0 [ENABLED,IMMUTABLE] > > pad1: Source > > [fmt:unknown/0x0] > > -> "sun6i-csi":1 [ENABLED] > > > > - entity 9: ov5648 0-0036 (1 pad, 1 link) > > type V4L2 subdev subtype Sensor flags 0 > > device node name /dev/v4l-subdev1 > > pad0: Source > > [fmt:SBGGR8_1X8/2592x1944@1/15 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range] > > -> "sun6i-mipi-csi2":0 [ENABLED,IMMUTABLE] > > > > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865 > > > > Media device information > > ------------------------ > > driver sun6i-csi > > model Allwinner Video Capture Device > > serial > > bus info platform:1cb0000.camera > > hw revision 0x0 > > driver version 5.10.0 > > > > Device topology > > - entity 1: sun6i-csi (2 pads, 1 link) > > type Node subtype V4L flags 0 > > device node name /dev/video0 > > pad0: Sink > > pad1: Sink > > <- "sun8i-a83t-mipi-csi2":1 [ENABLED] > > > > - entity 6: sun8i-a83t-mipi-csi2 (2 pads, 2 links) > > type V4L2 subdev subtype Unknown flags 0 > > device node name /dev/v4l-subdev0 > > pad0: Sink > > [fmt:unknown/0x0] > > <- "ov8865 1-0036":0 [ENABLED,IMMUTABLE] > > pad1: Source > > [fmt:unknown/0x0] > > -> "sun6i-csi":1 [ENABLED] > > > > - entity 9: ov8865 1-0036 (1 pad, 1 link) > > type V4L2 subdev subtype Sensor flags 0 > > device node name /dev/v4l-subdev1 > > pad0: Source > > [fmt:SBGGR10_1X10/3264x2448@1/30 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range] > > -> "sun8i-a83t-mipi-csi2":0 [ENABLED,IMMUTABLE] > > > > V4L2 compliance runs are available below: > > > > # sun6i-csi + sun6i-mipi-csi2 + ov5648 > > > > v4l2-compliance SHA: not available, 32 bits > > > > Compliance test for sun6i-video device /dev/video0: > > > > Driver Info: > > Driver name : sun6i-video > > Card type : sun6i-csi > > Bus info : platform:camera > > Driver version : 5.10.0 > > Capabilities : 0x84200001 > > Video Capture > > Streaming > > Extended Pix Format > > Device Capabilities > > Device Caps : 0x04200001 > > Video Capture > > Streaming > > Extended Pix Format > > Media Driver Info: > > Driver name : sun6i-csi > > Model : Allwinner Video Capture Device > > Serial : > > Bus info : platform:1cb0000.camera > > Media version : 5.10.0 > > Hardware revision: 0x00000000 (0) > > Driver version : 5.10.0 > > Interface Info: > > ID : 0x03000004 > > Type : V4L Video > > Entity Info: > > ID : 0x00000001 (1) > > Name : sun6i-csi > > Function : V4L2 I/O > > Pad 0x01000002 : 0: Sink > > Pad 0x01000003 : 1: Sink > > Link 0x0200000d: from remote pad 0x1000008 of entity 'sun6i-mipi-csi2': Data, Enabled > > > > Required ioctls: > > test MC information (see 'Media Driver Info' above): OK > > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera' > > test VIDIOC_QUERYCAP: OK > > > > Allow for multiple opens: > > test second /dev/video0 open: OK > > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera' > > test VIDIOC_QUERYCAP: OK > > test VIDIOC_G/S_PRIORITY: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > > test VIDIOC_LOG_STATUS: OK > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Control ioctls (Input 0): > > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0 > > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0 > > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0 > > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0 > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > > test VIDIOC_QUERYCTRL: OK > > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step > > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step > > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step > > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step > > test VIDIOC_G/S_CTRL: OK > > warn: v4l2-test-controls.cpp(555): Gain: returned control value 44 not a multiple of step > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 15 Private Controls: 0 > > > > Format ioctls (Input 0): > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK > > test VIDIOC_TRY_FMT: OK > > test VIDIOC_S_FMT: OK > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK (Not Supported) > > test Composing: OK (Not Supported) > > test Scaling: OK > > > > Codec ioctls (Input 0): > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > Buffer ioctls (Input 0): > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > > fail: v4l2-test-buffers.cpp(755): q.export_bufs(node, q.g_type()) > > test VIDIOC_EXPBUF: FAIL > > test Requests: OK (Not Supported) > > > > Total for sun6i-video device /dev/video0: 45, Succeeded: 44, Failed: 1, Warnings: 1 > > > > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865 > > > > v4l2-compliance SHA: not available, 32 bits > > > > Compliance test for sun6i-video device /dev/video0: > > > > Driver Info: > > Driver name : sun6i-video > > Card type : sun6i-csi > > Bus info : platform:camera > > Driver version : 5.10.0 > > Capabilities : 0x84200001 > > Video Capture > > Streaming > > Extended Pix Format > > Device Capabilities > > Device Caps : 0x04200001 > > Video Capture > > Streaming > > Extended Pix Format > > Media Driver Info: > > Driver name : sun6i-csi > > Model : Allwinner Video Capture Device > > Serial : > > Bus info : platform:1cb0000.camera > > Media version : 5.10.0 > > Hardware revision: 0x00000000 (0) > > Driver version : 5.10.0 > > Interface Info: > > ID : 0x03000004 > > Type : V4L Video > > Entity Info: > > ID : 0x00000001 (1) > > Name : sun6i-csi > > Function : V4L2 I/O > > Pad 0x01000002 : 0: Sink > > Pad 0x01000003 : 1: Sink > > Link 0x0200000d: from remote pad 0x1000008 of entity 'sun8i-a83t-mipi-csi2': Data, Enabled > > > > Required ioctls: > > test MC information (see 'Media Driver Info' above): OK > > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera' > > test VIDIOC_QUERYCAP: OK > > > > Allow for multiple opens: > > test second /dev/video0 open: OK > > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera' > > test VIDIOC_QUERYCAP: OK > > test VIDIOC_G/S_PRIORITY: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > > test VIDIOC_LOG_STATUS: OK > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Control ioctls (Input 0): > > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0 > > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0 > > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0 > > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0 > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > > test VIDIOC_QUERYCTRL: OK > > test VIDIOC_G/S_CTRL: OK > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 11 Private Controls: 0 > > > > Format ioctls (Input 0): > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK > > test VIDIOC_TRY_FMT: OK > > test VIDIOC_S_FMT: OK > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK (Not Supported) > > test Composing: OK (Not Supported) > > test Scaling: OK > > > > Codec ioctls (Input 0): > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > Buffer ioctls (Input 0): > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > > test VIDIOC_EXPBUF: OK > > test Requests: OK (Not Supported) > > > > Total for sun6i-video device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 6 > > > > Paul Kocialkowski (16): > > docs: phy: Add a part about PHY mode and submode > > phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes > > phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI > > CSI-2 > > media: sun6i-csi: Stop using the deprecated fwnode endpoint parser > > media: sun6i-csi: Use common V4L2 format info for storage bpp > > media: sun6i-csi: Only configure the interface data width for parallel > > dt-bindings: media: sun6i-a31-csi: Add MIPI CSI-2 input port > > media: sun6i-csi: Add support for MIPI CSI-2 bridge input > > dt-bindings: media: Add A31 MIPI CSI-2 bindings documentation > > media: sunxi: Add support for the A31 MIPI CSI-2 controller > > ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support > > MAINTAINERS: Add entry for the Allwinner A31 MIPI CSI-2 bridge > > dt-bindings: media: Add A83T MIPI CSI-2 bindings documentation > > media: sunxi: Add support for the A83T MIPI CSI-2 controller > > ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node > > MAINTAINERS: Add entry for the Allwinner A83T MIPI CSI-2 bridge > > > > .../media/allwinner,sun6i-a31-csi.yaml | 88 ++- > > .../media/allwinner,sun6i-a31-mipi-csi2.yaml | 156 ++++ > > .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 147 ++++ > > Documentation/driver-api/phy/phy.rst | 18 + > > MAINTAINERS | 16 + > > arch/arm/boot/dts/sun8i-a83t.dtsi | 26 + > > arch/arm/boot/dts/sun8i-v3s.dtsi | 68 ++ > > .../platform/rockchip/rkisp1/rkisp1-isp.c | 3 +- > > drivers/media/platform/sunxi/Kconfig | 2 + > > drivers/media/platform/sunxi/Makefile | 2 + > > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 218 ++++-- > > .../platform/sunxi/sun6i-csi/sun6i_csi.h | 65 +- > > .../platform/sunxi/sun6i-csi/sun6i_video.c | 57 +- > > .../platform/sunxi/sun6i-csi/sun6i_video.h | 7 +- > > .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 12 + > > .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 + > > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 600 ++++++++++++++++ > > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 117 +++ > > .../sunxi/sun8i-a83t-mipi-csi2/Kconfig | 11 + > > .../sunxi/sun8i-a83t-mipi-csi2/Makefile | 4 + > > .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 92 +++ > > .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h | 39 + > > .../sun8i_a83t_mipi_csi2.c | 666 ++++++++++++++++++ > > .../sun8i_a83t_mipi_csi2.h | 197 ++++++ > > drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 164 ++++- > > include/linux/phy/phy-mipi-dphy.h | 13 + > > 26 files changed, 2651 insertions(+), 141 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml > > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml > > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig > > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile > > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c > > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h > > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig > > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile > > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c > > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h > > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c > > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h > > > -- Paul Kocialkowski, Bootlin Embedded Linux and kernel engineering https://bootlin.com