From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Cc: dave.stevenson@raspberrypi.com, devicetree@vger.kernel.org,
kernel-list@raspberrypi.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org, lukasz@jany.st,
mchehab@kernel.org, naush@raspberrypi.com, robh@kernel.org,
tomi.valkeinen@ideasonboard.com, nsaenz@kernel.org,
bcm-kernel-feedback-list@broadcom.com
Subject: Re: [RFC PATCH v4 03/12] dt-bindings: media: Add bindings for bcm2835-unicam
Date: Fri, 4 Feb 2022 04:42:35 +0200 [thread overview]
Message-ID: <YfySmx/unIvHolh3@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220203175009.558868-4-jeanmichel.hautbois@ideasonboard.com>
Hi Jean-Michel,
Thank you for the patch.
On Thu, Feb 03, 2022 at 06:50:00PM +0100, Jean-Michel Hautbois wrote:
> Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
> camera interface. Also add a MAINTAINERS entry for it.
You can drop the last sentence now that the MAINTAINERS entry has been
moved out.
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
>
> ---
> v4:
> - make MAINTAINERS its own patch
> - describe the reg and clocks correctly
> - use a vendor entry for the number of data lanes
> ---
> .../bindings/media/brcm,bcm2835-unicam.yaml | 110 ++++++++++++++++++
> 1 file changed, 110 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> new file mode 100644
> index 000000000000..0725a0267c60
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM283x Camera Interface (Unicam)
> +
> +maintainers:
> + - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
> +
> +description: |-
> + The Unicam block on BCM283x SoCs is the receiver for either
> + CSI-2 or CCP2 data from image sensors or similar devices.
> +
> + The main platform using this SoC is the Raspberry Pi family of boards.
> + On the Pi the VideoCore firmware can also control this hardware block,
> + and driving it from two different processors will cause issues.
> + To avoid this, the firmware checks the device tree configuration
> + during boot. If it finds device tree nodes starting by csi then
"[...] device tree nodes whose name starts with 'csi' then [...]"
> + it will stop the firmware accessing the block, and it can then
> + safely be used via the device tree binding.
> +
> +properties:
> + compatible:
> + const: brcm,bcm2835-unicam
> +
> + reg:
> + items:
> + - description: Unicam block.
> + - description: Clock Manager Image (CMI) block.
As Stefan pointed out, you need
reg-names:
items:
- const: main
- const: cmi
Alternatives for main could be core or unicam. Dave, do you have a
preference ?
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Clock to drive the LP state machine of Unicam.
> + - description: Clock for the vpu (core clock).
s/vpu/VPU/
> +
> + clock-names:
> + items:
> + - const: lp
> + - const: vpu
> +
> + power-domains:
> + items:
> + - description: Unicam power domain
> +
> + brcm,num-data-lanes:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 2, 4 ]
> + description: Number of data lanes on the csi bus
I'd write
description: |
Number of CSI-2 data lanes supported by this Unicam instance. The number
of data lanes actively used is specified with the data-lanes endpoint
property.
> +
> + port:
> + additionalProperties: false
Shouldn't this be unevaluatedProperties ?
I would also put it after the $ref line.
> + $ref: /schemas/graph.yaml#/$defs/port-base
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes: true
> + link-frequencies: true
link-frequencies is specified on the sensor side, not here. You can drop
it.
> +
> + required:
> + - data-lanes
> + - link-frequencies
> +
> + required:
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - brcm,num-data-lanes
> + - port
> +
> +additionalProperties: False
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/bcm2835.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/raspberrypi-power.h>
> + csi1: csi@7e801000 {
> + compatible = "brcm,bcm2835-unicam";
> + reg = <0x7e801000 0x800>,
> + <0x7e802004 0x4>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clocks BCM2835_CLOCK_CAM1>,
> + <&firmware_clocks 4>;
> + clock-names = "lp", "vpu";
> + power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
> + brcm,num-data-lanes = <2>;
> + port {
> + csi1_ep: endpoint {
Wrong indentation.
> + remote-endpoint = <&imx219_0>;
> + data-lanes = <1 2>;
> + link-frequencies = /bits/ 64 <456000000>;
Drop link-frequencies here too.
With these small issues fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + };
> + };
> + };
> +...
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-02-04 2:43 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-03 17:49 [RFC PATCH v4 00/12] Add support for BCM2835 camera interface (unicam) Jean-Michel Hautbois
2022-02-03 17:49 ` [RFC PATCH v4 01/12] media: v4l: Add V4L2-PIX-FMT-Y12P format Jean-Michel Hautbois
2022-02-03 17:49 ` [RFC PATCH v4 02/12] media: v4l: Add V4L2-PIX-FMT-Y14P format Jean-Michel Hautbois
2022-02-03 17:50 ` [RFC PATCH v4 03/12] dt-bindings: media: Add bindings for bcm2835-unicam Jean-Michel Hautbois
2022-02-03 20:01 ` Stefan Wahren
2022-02-04 2:42 ` Laurent Pinchart [this message]
2022-02-04 8:50 ` (EXT) " Alexander Stein
2022-02-05 2:22 ` Laurent Pinchart
2022-02-07 6:30 ` (EXT) " Alexander Stein
2022-02-08 1:36 ` Laurent Pinchart
2022-02-08 11:35 ` Dave Stevenson
2022-02-03 17:50 ` [RFC PATCH v4 04/12] media: MAINTAINERS: add bcm2835 unicam driver Jean-Michel Hautbois
2022-02-04 2:40 ` Laurent Pinchart
2022-02-03 17:50 ` [RFC PATCH v4 05/12] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Jean-Michel Hautbois
2022-02-03 20:42 ` Stefan Wahren
2022-02-05 2:20 ` Laurent Pinchart
2022-02-03 17:50 ` [RFC PATCH v4 06/12] ARM: dts: bcm2711: Add unicam CSI nodes Jean-Michel Hautbois
2022-02-03 20:06 ` Stefan Wahren
2022-02-04 2:45 ` Laurent Pinchart
2022-02-03 17:50 ` [RFC PATCH v4 07/12] media: imx219: Rename mbus codes array Jean-Michel Hautbois
2022-02-04 2:51 ` Laurent Pinchart
2022-02-03 17:50 ` [RFC PATCH v4 08/12] media: imx219: Switch from open to init_cfg Jean-Michel Hautbois
2022-02-04 2:54 ` Laurent Pinchart
2022-02-03 17:50 ` [RFC PATCH v4 09/12] media: imx219: Introduce the set_routing operation Jean-Michel Hautbois
2022-02-03 17:50 ` [RFC PATCH v4 10/12] media: imx219: use a local v4l2_subdev to simplify reading Jean-Michel Hautbois
2022-02-04 2:56 ` Laurent Pinchart
2022-02-03 17:50 ` [RFC PATCH v4 11/12] media: imx219: Add support for the V4L2 subdev active state Jean-Michel Hautbois
2022-02-03 17:50 ` [RFC PATCH v4 12/12] media: bcm283x: Include the imx219 node Jean-Michel Hautbois
2022-02-04 2:49 ` Laurent Pinchart
2022-02-03 19:55 ` [RFC PATCH v4 00/12] Add support for BCM2835 camera interface (unicam) Stefan Wahren
2022-02-04 0:38 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YfySmx/unIvHolh3@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=jeanmichel.hautbois@ideasonboard.com \
--cc=kernel-list@raspberrypi.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lukasz@jany.st \
--cc=mchehab@kernel.org \
--cc=naush@raspberrypi.com \
--cc=nsaenz@kernel.org \
--cc=robh@kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).