linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Cc: dave.stevenson@raspberrypi.com, devicetree@vger.kernel.org,
	kernel-list@raspberrypi.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org, lukasz@jany.st,
	mchehab@kernel.org, naush@raspberrypi.com, robh@kernel.org,
	tomi.valkeinen@ideasonboard.com,
	bcm-kernel-feedback-list@broadcom.com, stefan.wahren@i2se.com
Subject: Re: [PATCH v5 08/11] media: imx219: Switch from open to init_cfg
Date: Tue, 8 Feb 2022 18:02:49 +0200	[thread overview]
Message-ID: <YgKUKauDwCIBFovX@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220208155027.891055-9-jeanmichel.hautbois@ideasonboard.com>

Hi Jean-Michel,

Thank you for the patch.

On Tue, Feb 08, 2022 at 04:50:24PM +0100, Jean-Michel Hautbois wrote:
> Use the init_cfg pad level operation instead of the internal subdev
> open operation to set default formats on the pads.
> While at it, make the imx219_pad_ops more easier to read.

It could have been useful to explain here why there's a separate
imx219_init_formats() function, as reviewers could wonder. It's clear
when reviewing the next patches though.

> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
> ---
>  drivers/media/i2c/imx219.c | 63 +++++++++++++++-----------------------
>  1 file changed, 25 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 74dba5e61201..abcaee15c4a0 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -685,34 +685,6 @@ static void imx219_set_default_format(struct imx219 *imx219)
>  	fmt->field = V4L2_FIELD_NONE;
>  }
>  
> -static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> -{
> -	struct imx219 *imx219 = to_imx219(sd);
> -	struct v4l2_mbus_framefmt *try_fmt =
> -		v4l2_subdev_get_try_format(sd, fh->state, 0);
> -	struct v4l2_rect *try_crop;
> -
> -	mutex_lock(&imx219->mutex);
> -
> -	/* Initialize try_fmt */
> -	try_fmt->width = supported_modes[0].width;
> -	try_fmt->height = supported_modes[0].height;
> -	try_fmt->code = imx219_get_format_code(imx219,
> -					       MEDIA_BUS_FMT_SRGGB10_1X10);
> -	try_fmt->field = V4L2_FIELD_NONE;
> -
> -	/* Initialize try_crop rectangle. */
> -	try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
> -	try_crop->top = IMX219_PIXEL_ARRAY_TOP;
> -	try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
> -	try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
> -	try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;

The crop rectangle initialization is removed here, but not added below.

> -
> -	mutex_unlock(&imx219->mutex);
> -
> -	return 0;
> -}
> -
>  static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
>  {
>  	struct imx219 *imx219 =
> @@ -802,6 +774,25 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
>  	.s_ctrl = imx219_set_ctrl,
>  };
>  
> +static void imx219_init_formats(struct v4l2_subdev_state *state)
> +{
> +	struct v4l2_mbus_framefmt *format;
> +
> +	format = v4l2_state_get_stream_format(state, 0, 0);
> +	format->code = imx219_mbus_formats[0];
> +	format->width = supported_modes[0].width;
> +	format->height = supported_modes[0].height;
> +	format->field = V4L2_FIELD_NONE;
> +	format->colorspace = V4L2_COLORSPACE_RAW;
> +}
> +
> +static int imx219_init_cfg(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *state)
> +{
> +	imx219_init_formats(state);
> +	return 0;
> +}
> +
>  static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
>  				 struct v4l2_subdev_state *sd_state,
>  				 struct v4l2_subdev_mbus_code_enum *code)
> @@ -1255,11 +1246,12 @@ static const struct v4l2_subdev_video_ops imx219_video_ops = {
>  };
>  
>  static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> -	.enum_mbus_code = imx219_enum_mbus_code,
> -	.get_fmt = imx219_get_pad_format,
> -	.set_fmt = imx219_set_pad_format,
> -	.get_selection = imx219_get_selection,
> -	.enum_frame_size = imx219_enum_frame_size,
> +	.init_cfg		= imx219_init_cfg,
> +	.enum_mbus_code		= imx219_enum_mbus_code,
> +	.get_fmt		= imx219_get_pad_format,
> +	.set_fmt		= imx219_set_pad_format,
> +	.get_selection		= imx219_get_selection,
> +	.enum_frame_size	= imx219_enum_frame_size,
>  };
>  
>  static const struct v4l2_subdev_ops imx219_subdev_ops = {
> @@ -1268,10 +1260,6 @@ static const struct v4l2_subdev_ops imx219_subdev_ops = {
>  	.pad = &imx219_pad_ops,
>  };
>  
> -static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
> -	.open = imx219_open,
> -};
> -
>  /* Initialize control handlers */
>  static int imx219_init_controls(struct imx219 *imx219)
>  {
> @@ -1520,7 +1508,6 @@ static int imx219_probe(struct i2c_client *client)
>  		goto error_power_off;
>  
>  	/* Initialize subdev */
> -	imx219->sd.internal_ops = &imx219_internal_ops;
>  	imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
>  			    V4L2_SUBDEV_FL_HAS_EVENTS;
>  	imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2022-02-08 16:02 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08 15:50 [PATCH v5 00/11] Add support for BCM2835 camera interface (unicam) Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 01/11] media: v4l: Add V4L2-PIX-FMT-Y12P format Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 02/11] media: v4l: Add V4L2-PIX-FMT-Y14P format Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 03/11] dt-bindings: media: Add bindings for bcm2835-unicam Jean-Michel Hautbois
2022-02-09 18:56   ` Rob Herring
2022-02-13 15:48   ` Stefan Wahren
2022-02-14  9:39     ` Maxime Ripard
2022-02-14  9:54       ` Laurent Pinchart
2022-02-14 11:32         ` Stefan Wahren
2022-02-21  7:10           ` Laurent Pinchart
2022-02-21 10:03             ` Maxime Ripard
2022-02-21 12:45             ` Stefan Wahren
2022-02-21 12:52               ` Laurent Pinchart
2022-02-25  8:19   ` Sakari Ailus
2022-02-08 15:50 ` [PATCH v5 04/11] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Jean-Michel Hautbois
2022-02-08 21:00   ` Stefan Wahren
2022-02-13 12:52     ` Laurent Pinchart
2022-02-13 11:17   ` Stefan Wahren
2022-02-13 12:49     ` Laurent Pinchart
2022-02-20 10:01   ` Stefan Wahren
2022-02-20 10:08     ` Laurent Pinchart
2022-02-21  9:55   ` Laurent Pinchart
2022-02-25  9:29   ` Sakari Ailus
2023-07-02 15:23     ` Laurent Pinchart
2023-07-02 18:18       ` Sakari Ailus
2023-07-02 21:45         ` Laurent Pinchart
2023-07-02 21:47           ` Laurent Pinchart
2023-07-02 21:56             ` Sakari Ailus
2023-07-02 22:01               ` Laurent Pinchart
2023-07-02 22:20                 ` Sakari Ailus
2023-07-02 22:28                   ` Laurent Pinchart
2023-07-02 22:33                     ` Sakari Ailus
2023-07-02 21:53           ` Sakari Ailus
2023-07-02 21:58             ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 05/11] media: MAINTAINERS: add bcm2835 unicam driver Jean-Michel Hautbois
2022-02-08 15:58   ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 06/11] ARM: dts: bcm2711: Add unicam CSI nodes Jean-Michel Hautbois
2022-02-13 10:35   ` Stefan Wahren
2022-02-13 13:51     ` Stefan Wahren
2022-02-08 15:50 ` [PATCH v5 07/11] media: imx219: Rename mbus codes array Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 08/11] media: imx219: Switch from open to init_cfg Jean-Michel Hautbois
2022-02-08 16:02   ` Laurent Pinchart [this message]
2022-02-08 16:05     ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 09/11] media: imx219: Introduce the set_routing operation Jean-Michel Hautbois
2022-02-21  7:17   ` Laurent Pinchart
2022-02-08 15:50 ` [PATCH v5 10/11] media: imx219: use a local v4l2_subdev to simplify reading Jean-Michel Hautbois
2022-02-08 15:50 ` [PATCH v5 11/11] media: imx219: Add support for the V4L2 subdev active state Jean-Michel Hautbois
2022-02-21  7:25   ` Laurent Pinchart
2022-02-16 20:57 ` [PATCH v5 00/11] Add support for BCM2835 camera interface (unicam) Stefan Wahren
2022-02-20 14:30   ` Jean-Michel Hautbois
2022-02-26 17:18     ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YgKUKauDwCIBFovX@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jeanmichel.hautbois@ideasonboard.com \
    --cc=kernel-list@raspberrypi.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=lukasz@jany.st \
    --cc=mchehab@kernel.org \
    --cc=naush@raspberrypi.com \
    --cc=robh@kernel.org \
    --cc=stefan.wahren@i2se.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).