From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, tomi.valkeinen@ideasonboard.com,
bingbu.cao@intel.com, hongju.wang@intel.com, hverkuil@xs4all.nl,
Andrey Konovalov <andrey.konovalov@linaro.org>,
Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
Dmitry Perchanov <dmitry.perchanov@intel.com>,
"Ng, Khai Wen" <khai.wen.ng@intel.com>,
Alain Volmat <alain.volmat@foss.st.com>
Subject: Re: [PATCH v8 25/38] media: ccs: Remove ccs_get_crop_compose helper
Date: Tue, 16 Apr 2024 07:30:27 +0000 [thread overview]
Message-ID: <Zh4pEzWl9U8kv675@kekkonen.localdomain> (raw)
In-Reply-To: <20240321180515.GU9582@pendragon.ideasonboard.com>
Hi Laurent,
On Thu, Mar 21, 2024 at 08:05:15PM +0200, Laurent Pinchart wrote:
> Hi Sakari,
>
> Thank you for the patch.
>
> On Wed, Mar 13, 2024 at 09:25:03AM +0200, Sakari Ailus wrote:
> > As it's now easier to obtain the necessary information on crop and compose
> > rectangles after moving to sub-device state, remove the
> > ccs_get_crop_compose helper.
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > ---
> > drivers/media/i2c/ccs/ccs-core.c | 130 ++++++++++++++-----------------
> > 1 file changed, 58 insertions(+), 72 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
> > index 1f91af25eac6..6c7eb4f04070 100644
> > --- a/drivers/media/i2c/ccs/ccs-core.c
> > +++ b/drivers/media/i2c/ccs/ccs-core.c
> > @@ -2222,24 +2222,6 @@ static int ccs_get_format(struct v4l2_subdev *subdev,
> > return rval;
> > }
> >
> > -static void ccs_get_crop_compose(struct v4l2_subdev *subdev,
> > - struct v4l2_subdev_state *sd_state,
> > - struct v4l2_rect **crops,
> > - struct v4l2_rect **comps)
> > -{
> > - struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > - unsigned int i;
> > -
> > - if (crops)
> > - for (i = 0; i < subdev->entity.num_pads; i++)
> > - crops[i] =
> > - v4l2_subdev_state_get_crop(sd_state, i,
> > - CCS_STREAM_PIXEL);
> > - if (comps)
> > - *comps = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> > - CCS_STREAM_PIXEL);
> > -}
> > -
> > /* Changes require propagation only on sink pad. */
> > static void ccs_propagate(struct v4l2_subdev *subdev,
> > struct v4l2_subdev_state *sd_state, int which,
> > @@ -2247,15 +2229,17 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
> > {
> > struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > - struct v4l2_rect *comp, *crops[CCS_PADS];
> > + struct v4l2_rect *comp, *crop;
> > struct v4l2_mbus_framefmt *fmt;
> >
> > - ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> > -
> > + comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> > + CCS_STREAM_PIXEL);
> > switch (target) {
> > case V4L2_SEL_TGT_CROP:
> > - comp->width = crops[CCS_PAD_SINK]->width;
> > - comp->height = crops[CCS_PAD_SINK]->height;
> > + crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SINK,
> > + CCS_STREAM_PIXEL);
> > + comp->width = crop->width;
> > + comp->height = crop->height;
> > if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > if (ssd == sensor->scaler) {
> > sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
> > @@ -2269,13 +2253,15 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
> > }
> > fallthrough;
> > case V4L2_SEL_TGT_COMPOSE:
> > - *crops[CCS_PAD_SRC] = *comp;
> > + crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SRC,
> > + CCS_STREAM_PIXEL);
> > + *crop = *comp;
> > fmt = v4l2_subdev_state_get_format(sd_state, CCS_PAD_SRC,
> > CCS_STREAM_PIXEL);
> > fmt->width = comp->width;
> > fmt->height = comp->height;
> > if (which == V4L2_SUBDEV_FORMAT_ACTIVE && ssd == sensor->src)
> > - sensor->src_src = *crops[CCS_PAD_SRC];
> > + sensor->src_src = *crop;
> > break;
> > default:
> > WARN_ON_ONCE(1);
> > @@ -2416,7 +2402,7 @@ static int ccs_set_format(struct v4l2_subdev *subdev,
> > {
> > struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > - struct v4l2_rect *crops[CCS_PADS];
> > + struct v4l2_rect *crop;
> >
> > if (subdev == &sensor->src->sd && fmt->pad == CCS_PAD_META)
> > return ccs_get_format(subdev, sd_state, fmt);
> > @@ -2458,12 +2444,13 @@ static int ccs_set_format(struct v4l2_subdev *subdev,
> > CCS_LIM(sensor, MIN_Y_OUTPUT_SIZE),
> > CCS_LIM(sensor, MAX_Y_OUTPUT_SIZE));
> >
> > - ccs_get_crop_compose(subdev, sd_state, crops, NULL);
> > + crop = v4l2_subdev_state_get_crop(sd_state, ssd->sink_pad,
> > + CCS_STREAM_PIXEL);
> >
> > - crops[ssd->sink_pad]->left = 0;
> > - crops[ssd->sink_pad]->top = 0;
> > - crops[ssd->sink_pad]->width = fmt->format.width;
> > - crops[ssd->sink_pad]->height = fmt->format.height;
> > + crop->left = 0;
> > + crop->top = 0;
> > + crop->width = fmt->format.width;
> > + crop->height = fmt->format.height;
> > ccs_propagate(subdev, sd_state, fmt->which, V4L2_SEL_TGT_CROP);
> >
> > mutex_unlock(&sensor->mutex);
> > @@ -2518,24 +2505,23 @@ static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
> > static void ccs_set_compose_binner(struct v4l2_subdev *subdev,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_selection *sel,
> > - struct v4l2_rect **crops,
> > + struct v4l2_rect *sink_crop,
>
> const
Yes. Also it seems the comp argument can be dropped.
>
> > struct v4l2_rect *comp)
> > {
> > struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > unsigned int i;
> > unsigned int binh = 1, binv = 1;
> > int best = scaling_goodness(
> > - subdev,
> > - crops[CCS_PAD_SINK]->width, sel->r.width,
> > - crops[CCS_PAD_SINK]->height, sel->r.height, sel->flags);
> > + subdev, sink_crop->width, sel->r.width,
>
> s/\tsink_crop/ sink_crop/
Yes.
>
> > + sink_crop->height, sel->r.height, sel->flags);
>
> int best = scaling_goodness(subdev, sink_crop->width, sel->r.width,
> sink_crop->height, sel->r.height,
> sel->flags);
>
> >
> > for (i = 0; i < sensor->nbinning_subtypes; i++) {
> > int this = scaling_goodness(
> > subdev,
> > - crops[CCS_PAD_SINK]->width
> > + sink_crop->width
> > / sensor->binning_subtypes[i].horizontal,
> > sel->r.width,
> > - crops[CCS_PAD_SINK]->height
> > + sink_crop->height
> > / sensor->binning_subtypes[i].vertical,
> > sel->r.height, sel->flags);
>
> You know this is horrible to read, right ? :-)
I'll rewrap the calls to start the lines on the opening parenthesis.
>
> >
> > @@ -2550,8 +2536,8 @@ static void ccs_set_compose_binner(struct v4l2_subdev *subdev,
> > sensor->binning_horizontal = binh;
> > }
> >
> > - sel->r.width = (crops[CCS_PAD_SINK]->width / binh) & ~1;
> > - sel->r.height = (crops[CCS_PAD_SINK]->height / binv) & ~1;
> > + sel->r.width = (sink_crop->width / binh) & ~1;
> > + sel->r.height = (sink_crop->height / binv) & ~1;
> > }
> >
> > /*
> > @@ -2566,7 +2552,7 @@ static void ccs_set_compose_binner(struct v4l2_subdev *subdev,
> > static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_selection *sel,
> > - struct v4l2_rect **crops,
> > + struct v4l2_rect *sink_crop,
>
> const
Yes.
>
> > struct v4l2_rect *comp)
> > {
> > struct i2c_client *client = v4l2_get_subdevdata(subdev);
> > @@ -2579,17 +2565,12 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
> > unsigned int i;
> > int best = INT_MIN;
> >
> > - sel->r.width = min_t(unsigned int, sel->r.width,
> > - crops[CCS_PAD_SINK]->width);
> > - sel->r.height = min_t(unsigned int, sel->r.height,
> > - crops[CCS_PAD_SINK]->height);
> > -
> > - a = crops[CCS_PAD_SINK]->width
> > - * CCS_LIM(sensor, SCALER_N_MIN) / sel->r.width;
> > - b = crops[CCS_PAD_SINK]->height
> > - * CCS_LIM(sensor, SCALER_N_MIN) / sel->r.height;
> > - max_m = crops[CCS_PAD_SINK]->width
> > - * CCS_LIM(sensor, SCALER_N_MIN)
> > + sel->r.width = min_t(unsigned int, sel->r.width, sink_crop->width);
> > + sel->r.height = min_t(unsigned int, sel->r.height, sink_crop->height);
> > +
> > + a = sink_crop->width * CCS_LIM(sensor, SCALER_N_MIN) / sel->r.width;
> > + b = sink_crop->height * CCS_LIM(sensor, SCALER_N_MIN) / sel->r.height;
> > + max_m = sink_crop->width * CCS_LIM(sensor, SCALER_N_MIN)
> > / CCS_LIM(sensor, MIN_X_OUTPUT_SIZE);
> >
> > a = clamp(a, CCS_LIM(sensor, SCALER_M_MIN),
> > @@ -2622,10 +2603,10 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
> > for (i = 0; i < ntry; i++) {
> > int this = scaling_goodness(
> > subdev,
> > - crops[CCS_PAD_SINK]->width
> > + sink_crop->width
> > / try[i] * CCS_LIM(sensor, SCALER_N_MIN),
> > sel->r.width,
> > - crops[CCS_PAD_SINK]->height,
> > + sink_crop->height,
> > sel->r.height,
> > sel->flags);
> >
> > @@ -2642,12 +2623,10 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
> > continue;
> >
> > this = scaling_goodness(
> > - subdev, crops[CCS_PAD_SINK]->width
> > - / try[i]
> > + subdev, sink_crop->width / try[i]
> > * CCS_LIM(sensor, SCALER_N_MIN),
> > sel->r.width,
> > - crops[CCS_PAD_SINK]->height
> > - / try[i]
> > + sink_crop->height / try[i]
> > * CCS_LIM(sensor, SCALER_N_MIN),
> > sel->r.height,
> > sel->flags);
> > @@ -2660,17 +2639,15 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
> > }
> >
> > sel->r.width =
> > - (crops[CCS_PAD_SINK]->width
> > - / scale_m
> > + (sink_crop->width / scale_m
> > * CCS_LIM(sensor, SCALER_N_MIN)) & ~1;
>
> sel->r.width = (sink_crop->width / scale_m
> * CCS_LIM(sensor, SCALER_N_MIN)) & ~1;
>
> > if (mode == SMIAPP_SCALING_MODE_BOTH)
> > sel->r.height =
> > - (crops[CCS_PAD_SINK]->height
> > - / scale_m
> > + (sink_crop->height / scale_m
> > * CCS_LIM(sensor, SCALER_N_MIN))
> > & ~1;
> > else
> > - sel->r.height = crops[CCS_PAD_SINK]->height;
> > + sel->r.height = sink_crop->height;
> >
> > if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > sensor->scale_m = scale_m;
> > @@ -2684,17 +2661,20 @@ static int ccs_set_compose(struct v4l2_subdev *subdev,
> > {
> > struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > - struct v4l2_rect *comp, *crops[CCS_PADS];
> > + struct v4l2_rect *comp, *sink_crop;
>
> sink_crop can be const.
>
> >
> > - ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> > + sink_crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SINK,
> > + CCS_STREAM_PIXEL);
> > + comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> > + CCS_STREAM_PIXEL);
> >
> > sel->r.top = 0;
> > sel->r.left = 0;
> >
> > if (ssd == sensor->binner)
> > - ccs_set_compose_binner(subdev, sd_state, sel, crops, comp);
> > + ccs_set_compose_binner(subdev, sd_state, sel, sink_crop, comp);
> > else
> > - ccs_set_compose_scaler(subdev, sd_state, sel, crops, comp);
> > + ccs_set_compose_scaler(subdev, sd_state, sel, sink_crop, comp);
> >
> > *comp = sel->r;
> > ccs_propagate(subdev, sd_state, sel->which, V4L2_SEL_TGT_COMPOSE);
> > @@ -2755,9 +2735,12 @@ static int ccs_set_crop(struct v4l2_subdev *subdev,
> > {
> > struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > - struct v4l2_rect src_size = { 0 }, *crops[CCS_PADS], *comp;
> > + struct v4l2_rect src_size = { 0 }, *crop, *comp;
>
> comp can be const.
>
> >
> > - ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> > + crop = v4l2_subdev_state_get_crop(sd_state, sel->pad,
> > + CCS_STREAM_PIXEL);
> > + comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> > + CCS_STREAM_PIXEL);
> >
> > if (sel->pad == ssd->sink_pad) {
> > struct v4l2_mbus_framefmt *mfmt =
> > @@ -2781,7 +2764,7 @@ static int ccs_set_crop(struct v4l2_subdev *subdev,
> > sel->r.left = min_t(int, sel->r.left, src_size.width - sel->r.width);
> > sel->r.top = min_t(int, sel->r.top, src_size.height - sel->r.height);
> >
> > - *crops[sel->pad] = sel->r;
> > + *crop = sel->r;
> >
> > if (ssd != sensor->pixel_array && sel->pad == CCS_PAD_SINK)
> > ccs_propagate(subdev, sd_state, sel->which, V4L2_SEL_TGT_CROP);
> > @@ -2806,14 +2789,17 @@ static int ccs_get_selection(struct v4l2_subdev *subdev,
> > {
> > struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > - struct v4l2_rect *comp, *crops[CCS_PADS];
> > + struct v4l2_rect *crop, *comp;
>
> const
>
> > int ret;
> >
> > ret = ccs_sel_supported(subdev, sel);
> > if (ret)
> > return ret;
> >
> > - ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> > + crop = v4l2_subdev_state_get_crop(sd_state, sel->pad,
> > + CCS_STREAM_PIXEL);
> > + comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> > + CCS_STREAM_PIXEL);
> >
> > switch (sel->target) {
> > case V4L2_SEL_TGT_CROP_BOUNDS:
> > @@ -2835,7 +2821,7 @@ static int ccs_get_selection(struct v4l2_subdev *subdev,
> > break;
> > case V4L2_SEL_TGT_CROP:
> > case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> > - sel->r = *crops[sel->pad];
> > + sel->r = *crop;
> > break;
> > case V4L2_SEL_TGT_COMPOSE:
> > sel->r = *comp;
>
--
Regards,
Sakari Ailus
next prev parent reply other threads:[~2024-04-16 7:30 UTC|newest]
Thread overview: 149+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-13 7:24 [PATCH v8 00/38] Generic line based metadata support, internal pads Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 01/38] media: mc: Add INTERNAL pad flag Sakari Ailus
2024-03-14 7:17 ` Tomi Valkeinen
2024-03-19 13:21 ` Sakari Ailus
2024-03-19 22:17 ` Laurent Pinchart
2024-03-20 7:49 ` Sakari Ailus
2024-03-21 17:20 ` Laurent Pinchart
2024-03-28 9:47 ` Sakari Ailus
2024-03-28 10:05 ` Sakari Ailus
2024-03-28 15:25 ` Laurent Pinchart
2024-04-11 7:25 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 02/38] media: Documentation: Add "stream" into glossary Sakari Ailus
2024-03-14 7:18 ` Tomi Valkeinen
2024-03-19 22:20 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 03/38] media: uapi: Add generic serial metadata mbus formats Sakari Ailus
2024-03-14 7:30 ` Tomi Valkeinen
2024-03-19 13:27 ` Sakari Ailus
2024-03-19 14:20 ` Tomi Valkeinen
2024-03-19 22:33 ` Laurent Pinchart
2024-03-19 23:00 ` Laurent Pinchart
2024-03-20 8:48 ` Sakari Ailus
2024-03-21 17:30 ` Laurent Pinchart
2024-03-22 6:50 ` Tomi Valkeinen
2024-03-25 14:02 ` Sakari Ailus
2024-03-20 8:36 ` Sakari Ailus
2024-03-19 22:59 ` Laurent Pinchart
2024-03-20 16:23 ` Sakari Ailus
2024-03-21 17:38 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 04/38] media: uapi: Document which mbus format fields are valid for metadata Sakari Ailus
2024-03-14 15:23 ` Tomi Valkeinen
2024-03-19 23:14 ` Laurent Pinchart
2024-03-20 16:49 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 05/38] media: uapi: Add generic 8-bit metadata format definitions Sakari Ailus
2024-03-19 23:37 ` Laurent Pinchart
2024-04-15 14:05 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 06/38] media: v4l: Support line-based metadata capture Sakari Ailus
2024-03-19 23:40 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 07/38] media: Documentation: Additional streams generally don't harm capture Sakari Ailus
2024-03-19 23:48 ` Laurent Pinchart
2024-04-15 14:27 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 08/38] media: Documentation: Document embedded data guidelines for camera sensors Sakari Ailus
2024-03-15 14:49 ` Julien Massot
2024-03-20 0:03 ` Laurent Pinchart
2024-04-09 11:12 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 09/38] media: Documentation: v4l: Document internal source pads Sakari Ailus
2024-03-15 15:32 ` Julien Massot
2024-03-19 13:47 ` Sakari Ailus
2024-03-19 14:38 ` Julien Massot
2024-03-20 0:26 ` Laurent Pinchart
2024-04-09 12:14 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 10/38] media: Documentation: Document S_ROUTING behaviour Sakari Ailus
2024-03-15 15:38 ` Julien Massot
2024-03-20 0:33 ` Laurent Pinchart
2024-04-11 8:02 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 11/38] media: v4l: subdev: Add a function to lock two sub-device states, use it Sakari Ailus
2024-03-15 15:42 ` Julien Massot
2024-03-20 0:36 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 12/38] media: v4l: subdev: Move G_ROUTING handling below S_ROUTING Sakari Ailus
2024-03-15 15:43 ` Julien Massot
2024-03-20 0:37 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 13/38] media: v4l: subdev: Copy argument back to user also for S_ROUTING Sakari Ailus
2024-03-15 15:50 ` Julien Massot
2024-03-20 0:39 ` Laurent Pinchart
2024-04-11 8:06 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 14/38] media: v4l: subdev: Add len_routes field to struct v4l2_subdev_routing Sakari Ailus
2024-03-20 1:36 ` Laurent Pinchart
2024-04-16 7:09 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 15/38] media: v4l: subdev: Return routes set using S_ROUTING Sakari Ailus
2024-03-20 1:45 ` Laurent Pinchart
2024-04-16 7:12 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 16/38] media: v4l: subdev: Allow a larger number of routes than there's room for Sakari Ailus
2024-03-20 1:53 ` Laurent Pinchart
2024-04-16 8:08 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 17/38] media: v4l: subdev: Add trivial set_routing support Sakari Ailus
2024-03-15 15:51 ` Julien Massot
2024-03-20 1:55 ` Laurent Pinchart
2024-04-01 23:41 ` Laurent Pinchart
2024-04-11 8:13 ` Sakari Ailus
2024-04-12 19:14 ` Laurent Pinchart
2024-04-15 8:10 ` Sakari Ailus
2024-03-13 7:24 ` [PATCH v8 18/38] media: ccs: No need to set streaming to false in power off Sakari Ailus
2024-03-13 9:31 ` Kieran Bingham
2024-03-21 16:35 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 19/38] media: ccs: Use {enable,disable}_streams operations Sakari Ailus
2024-03-21 16:21 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 20/38] media: ccs: Track streaming state Sakari Ailus
2024-03-15 15:56 ` Julien Massot
2024-03-21 16:36 ` Laurent Pinchart
2024-03-13 7:24 ` [PATCH v8 21/38] media: ccs: Move ccs_validate_csi_data_format up Sakari Ailus
2024-03-15 15:57 ` Julien Massot
2024-03-21 16:37 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 22/38] media: ccs: Support frame descriptors Sakari Ailus
2024-03-15 16:02 ` Julien Massot
2024-03-21 16:44 ` Laurent Pinchart
2024-04-11 8:33 ` Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 23/38] media: uapi: ccs: Add media bus code for MIPI CCS embedded data Sakari Ailus
2024-03-15 16:03 ` Julien Massot
2024-03-21 16:49 ` Laurent Pinchart
2024-04-11 9:04 ` Sakari Ailus
2024-04-12 19:07 ` Laurent Pinchart
2024-04-14 10:48 ` Sakari Ailus
2024-04-20 8:07 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 24/38] media: ccs: Add support for embedded data stream Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 25/38] media: ccs: Remove ccs_get_crop_compose helper Sakari Ailus
2024-03-21 18:05 ` Laurent Pinchart
2024-04-16 7:30 ` Sakari Ailus [this message]
2024-03-13 7:25 ` [PATCH v8 26/38] media: ccs: Rely on sub-device state locking Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 27/38] media: ccs: Compute binning configuration from sub-device state Sakari Ailus
2024-03-21 17:57 ` Laurent Pinchart
2024-04-16 8:01 ` Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 28/38] media: ccs: Compute scaling " Sakari Ailus
2024-03-21 17:50 ` Laurent Pinchart
2024-04-16 7:59 ` Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 29/38] media: ccs: Remove which parameter from ccs_propagate Sakari Ailus
2024-03-21 17:39 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 30/38] media: Documentation: ccs: Document routing Sakari Ailus
2024-03-21 17:43 ` Laurent Pinchart
2024-04-16 7:37 ` Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 31/38] media: uapi: v4l: subdev: Enable streams API Sakari Ailus
2024-03-21 16:51 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 32/38] media: uapi: Add media bus code for ov2740 embedded data Sakari Ailus
2024-03-15 16:10 ` Julien Massot
2024-03-21 16:54 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 33/38] media: ov2740: Switch to {enable,disable}_streams Sakari Ailus
2024-03-15 16:13 ` Julien Massot
2024-03-21 16:56 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 34/38] media: ov2740: Track streaming state Sakari Ailus
2024-03-15 16:13 ` Julien Massot
2024-03-21 16:57 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 35/38] media: ov2740: Add support for embedded data Sakari Ailus
2024-03-14 7:00 ` Bingbu Cao
2024-03-19 13:13 ` Sakari Ailus
2024-03-14 8:24 ` Julien Massot
2024-03-19 13:18 ` Sakari Ailus
2024-03-21 17:16 ` Laurent Pinchart
2024-04-10 13:18 ` Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 36/38] media: v4l: Add V4L2_SUBDEV_ROUTE_FL_IMMUTABLE sub-device routing flag Sakari Ailus
2024-03-13 7:34 ` Tomi Valkeinen
2024-03-13 7:39 ` Sakari Ailus
2024-03-21 17:03 ` Laurent Pinchart
2024-04-09 13:21 ` Sakari Ailus
2024-04-09 15:21 ` Laurent Pinchart
2024-03-13 7:25 ` [PATCH v8 37/38] media: ccs: Add IMMUTABLE route flag Sakari Ailus
2024-03-15 16:08 ` Julien Massot
2024-03-21 16:59 ` Laurent Pinchart
2024-04-11 9:06 ` Sakari Ailus
2024-03-13 7:25 ` [PATCH v8 38/38] media: ov2740: " Sakari Ailus
2024-03-15 16:14 ` Julien Massot
2024-03-21 17:00 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zh4pEzWl9U8kv675@kekkonen.localdomain \
--to=sakari.ailus@linux.intel.com \
--cc=alain.volmat@foss.st.com \
--cc=andrey.konovalov@linaro.org \
--cc=bingbu.cao@intel.com \
--cc=dmitry.perchanov@intel.com \
--cc=hongju.wang@intel.com \
--cc=hverkuil@xs4all.nl \
--cc=jacopo.mondi@ideasonboard.com \
--cc=khai.wen.ng@intel.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).