linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: Stanimir Varbanov <stanimir.varbanov@linaro.org>,
	robh+dt@kernel.org, agross@kernel.org,
	bjorn.andersson@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	mka@chromium.org
Subject: Re: [PATCH v4 4/5] arm64: dts: sdm845: Add OPP tables and power-domains for venus
Date: Fri, 24 Jul 2020 14:19:25 +0530	[thread overview]
Message-ID: <a2935e9c-6908-05cb-a137-7dd2d5e50a33@codeaurora.org> (raw)
In-Reply-To: <e68ff810-362a-5b99-206b-f676b204101d@linaro.org>

Hey Stan,

On 7/23/2020 11:36 PM, Stanimir Varbanov wrote:
> Hi Rajendra,
> 
> After applying 2,3 and 4/5 patches on linaro-integration v5.8-rc2 I see
> below messages on db845:
> 
> qcom-venus aa00000.video-codec: dev_pm_opp_set_rate: failed to find
> current OPP for freq 533000097 (-34)
> 
> ^^^ This one is new.

I was hoping to be able to reproduce this on the 845 mtp (I don't have
a db845), but I can;t seem to get venus working on mainline [1]
(neither with linux-next, nor with linaro integration)
Do you know if I might be missing some fix?

> 
> qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x30000
> 
> ^^^ and this message is annoying, can we make it pr_debug in rpmh?

Sure, I'll send a patch for that and see what the rpmh owners have to say.

[1]

[    1.632147] qcom-venus aa00000.video-codec: Adding to iommu group 2
[    1.638920] qcom-venus aa00000.video-codec: non legacy binding
[    1.648313] ------------[ cut here ]------------
[    1.652976] video_cc_venus_ctl_axi_clk status stuck at 'off'
[    1.653068] WARNING: CPU: 7 PID: 1 at drivers/clk/qcom/clk-branch.c:92 clk_b8
[    1.667977] Modules linked in:
[    1.671076] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc6-00254-gc43551
[    1.678704] Hardware name: Qualcomm Technologies, Inc. SDM845 MTP (DT)
[    1.685294] pstate: 60c00085 (nZCv daIf +PAN +UAO BTYPE=--)
[    1.690911] pc : clk_branch_toggle+0x14c/0x168
[    1.695397] lr : clk_branch_toggle+0x14c/0x168
[    1.699881] sp : ffff80001005b900
[    1.703232] x29: ffff80001005b900 x28: ffffb58586ac2f38
[    1.708594] x27: ffff0000f86c6d48 x26: ffffb58586f09000
[    1.713953] x25: ffffb585867c0bd8 x24: 0000000000000000
[    1.719312] x23: ffffb5858702df28 x22: ffffb58585a3c6a8
[    1.724672] x21: 0000000000000001 x20: ffffb58586f09000
[    1.730031] x19: 0000000000000000 x18: ffffb58586f09948
[    1.735390] x17: 0000000000000001 x16: 0000000000000019
[    1.740749] x15: ffff80009005b5a7 x14: 0000000000000006
[    1.746107] x13: ffff80001005b5b5 x12: ffffb58586f21d68
[    1.751466] x11: 0000000000000000 x10: 0000000005f5e0ff
[    1.756825] x9 : ffff80001005b900 x8 : 2766666f27207461
[    1.762184] x7 : 206b637574732073 x6 : ffffb58587141848
[    1.767543] x5 : 0000000000000000 x4 : 0000000000000000
[    1.772902] x3 : 00000000ffffffff x2 : ffff4a7b76cd8000
[    1.778261] x1 : ad405f90446fcf00 x0 : 0000000000000000
[    1.783624] Call trace:
[    1.786103]  clk_branch_toggle+0x14c/0x168
[    1.790241]  clk_branch2_enable+0x18/0x20
[    1.794306]  clk_core_enable+0x60/0xa8
[    1.798090]  clk_core_enable_lock+0x20/0x40
[    1.802316]  clk_enable+0x14/0x28
[    1.805682]  core_clks_enable+0x94/0xd8
[    1.809562]  core_power_v4+0x48/0x50
[    1.813178]  venus_runtime_resume+0x24/0x40
[    1.817417]  pm_generic_runtime_resume+0x28/0x40
[    1.822079]  __rpm_callback+0xa0/0x138
[    1.825861]  rpm_callback+0x24/0x98
[    1.829390]  rpm_resume+0x32c/0x490
[    1.832917]  __pm_runtime_resume+0x38/0x88
[    1.837051]  venus_probe+0x1f0/0x34c
[    1.840667]  platform_drv_probe+0x4c/0xa8
[    1.844727]  really_probe+0x100/0x388
[    1.848428]  driver_probe_device+0x54/0xb8
[    1.852563]  device_driver_attach+0x6c/0x78
[    1.856790]  __driver_attach+0xb0/0xf0
[    1.860576]  bus_for_each_dev+0x68/0xc8
[    1.864456]  driver_attach+0x20/0x28
[    1.868064]  bus_add_driver+0x148/0x200
[    1.871941]  driver_register+0x60/0x110
[    1.875819]  __platform_driver_register+0x44/0x50
[    1.880576]  qcom_venus_driver_init+0x18/0x20
[    1.884990]  do_one_initcall+0x58/0x1a0
[    1.888878]  kernel_init_freeable+0x1fc/0x28c
[    1.893292]  kernel_init+0x10/0x108
[    1.896821]  ret_from_fork+0x10/0x1c
[    1.900441] ---[ end trace f12a7e5e182f3e4e ]---
[    1.906415] qcom-venus: probe of aa00000.video-codec failed with error -16

> 
> On 7/23/20 2:26 PM, Rajendra Nayak wrote:
>> Add the OPP tables in order to be able to vote on the performance state of
>> a power-domain.
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 40 ++++++++++++++++++++++++++++++++++--
>>   1 file changed, 38 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index e506793..5ca2265 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -3631,8 +3631,10 @@
>>   			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>>   			power-domains = <&videocc VENUS_GDSC>,
>>   					<&videocc VCODEC0_GDSC>,
>> -					<&videocc VCODEC1_GDSC>;
>> -			power-domain-names = "venus", "vcodec0", "vcodec1";
>> +					<&videocc VCODEC1_GDSC>,
>> +					<&rpmhpd SDM845_CX>;
>> +			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
>> +			operating-points-v2 = <&venus_opp_table>;
>>   			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>>   				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
>>   				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
>> @@ -3654,6 +3656,40 @@
>>   			video-core1 {
>>   				compatible = "venus-encoder";
>>   			};
>> +
>> +			venus_opp_table: venus-opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-100000000 {
>> +					opp-hz = /bits/ 64 <100000000>;
>> +					required-opps = <&rpmhpd_opp_min_svs>;
>> +				};
>> +
>> +				opp-200000000 {
>> +					opp-hz = /bits/ 64 <200000000>;
>> +					required-opps = <&rpmhpd_opp_low_svs>;
>> +				};
>> +
>> +				opp-320000000 {
>> +					opp-hz = /bits/ 64 <320000000>;
>> +					required-opps = <&rpmhpd_opp_svs>;
>> +				};
>> +
>> +				opp-380000000 {
>> +					opp-hz = /bits/ 64 <380000000>;
>> +					required-opps = <&rpmhpd_opp_svs_l1>;
>> +				};
>> +
>> +				opp-444000000 {
>> +					opp-hz = /bits/ 64 <444000000>;
>> +					required-opps = <&rpmhpd_opp_nom>;
>> +				};
>> +
>> +				opp-533000000 {
>> +					opp-hz = /bits/ 64 <533000000>;
>> +					required-opps = <&rpmhpd_opp_turbo>;
>> +				};
>> +			};
>>   		};
>>   
>>   		videocc: clock-controller@ab00000 {
>>
> 

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  reply	other threads:[~2020-07-24  8:49 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-23 11:26 [PATCH v4 0/5] DVFS support for Venus Rajendra Nayak
2020-07-23 11:26 ` [PATCH v4 1/5] dt-bindings: media: venus: Add an optional power domain for perf voting Rajendra Nayak
2020-07-23 17:30   ` Rob Herring
2020-07-23 11:26 ` [PATCH v4 2/5] media: venus: core: Fix error handling in probe Rajendra Nayak
2020-07-24 14:55   ` Stanimir Varbanov
2020-07-23 11:26 ` [PATCH v4 3/5] media: venus: core: Add support for opp tables/perf voting Rajendra Nayak
2020-07-26 12:47   ` Stanimir Varbanov
2020-07-23 11:26 ` [PATCH v4 4/5] arm64: dts: sdm845: Add OPP tables and power-domains for venus Rajendra Nayak
2020-07-23 18:06   ` Stanimir Varbanov
2020-07-24  8:49     ` Rajendra Nayak [this message]
2020-07-24 10:16       ` Stanimir Varbanov
2020-07-24  9:02     ` Rajendra Nayak
2020-07-24 16:28       ` Lina Iyer
2020-07-24 16:52         ` Stanimir Varbanov
2020-07-24 17:00           ` Stanimir Varbanov
2020-07-28  0:45         ` Stephen Boyd
2020-07-28 16:52           ` Lina Iyer
2020-07-28 19:51             ` Stephen Boyd
2020-07-28 20:11               ` Lina Iyer
2020-07-29 18:10                 ` Doug Anderson
2020-07-29 20:38                 ` Bjorn Andersson
2020-07-24 14:09     ` Stanimir Varbanov
2020-07-27  5:53       ` Rajendra Nayak
2020-07-27 12:08         ` Rajendra Nayak
2020-07-27 15:38           ` Viresh Kumar
2020-07-28  0:52             ` Stephen Boyd
2020-07-28  4:17               ` Rajendra Nayak
2020-07-28 19:54                 ` Stephen Boyd
2020-07-23 11:26 ` [PATCH v4 5/5] arm64: dts: sc7180: " Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a2935e9c-6908-05cb-a137-7dd2d5e50a33@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=stanimir.varbanov@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).