From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
To: "Lucas A. M. Magalhães" <lucmaga@gmail.com>, linux-media@vger.kernel.org
Cc: hverkuil@xs4all.nl, Dafna Hirschfeld <dafna3@gmail.com>,
helen.koike@collabora.com, lkcamp@lists.libreplanetbr.org
Subject: Re: [RFC PATCH] media: vimc: Add optimized mode
Date: Wed, 4 Dec 2019 11:45:35 +0100 [thread overview]
Message-ID: <a299c78d-ac09-49af-feb3-af3a7fb3b442@collabora.com> (raw)
In-Reply-To: <20191203225649.2132-1-lucmaga@gmail.com>
Hi,
that's nie idea:)
On 12/3/19 11:56 PM, Lucas A. M. Magalhães wrote:
> From: "Lucas A. M. Magalhaes" <lucmaga@gmail.com>
>
> Adds an optimized mode for vimc to generate the frame on the capture
> device with the expected configuration.
>
> It adds new set of processor functions that propagates a struct tpg_data
> instead of a frame. This struct is used at the end of the pipeline to
> generate the expected frame.
>
> It adds the vimc-opt-mode parameter that is used to activate the change
> previously explained.
>
> Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com>
> ---
>
> Hi, I'm finally sending a patch for an optimized patch for vimc.
>
> Helen and Hans, please note that this is still an RFC. I would like to
> know if this is more like what you expect for the optimized mode.
>
> Thanks!
>
> drivers/media/platform/vimc/vimc-capture.c | 57 ++++++++++++++++++++-
> drivers/media/platform/vimc/vimc-common.h | 9 +++-
> drivers/media/platform/vimc/vimc-core.c | 6 +++
> drivers/media/platform/vimc/vimc-debayer.c | 27 ++++++++--
> drivers/media/platform/vimc/vimc-scaler.c | 35 +++++++++++--
> drivers/media/platform/vimc/vimc-sensor.c | 24 +++++++--
> drivers/media/platform/vimc/vimc-streamer.c | 2 +-
> 7 files changed, 144 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
> index 76c015898cfd..7e127cbbc806 100644
> --- a/drivers/media/platform/vimc/vimc-capture.c
> +++ b/drivers/media/platform/vimc/vimc-capture.c
> @@ -8,6 +8,7 @@
> #include <media/v4l2-ioctl.h>
> #include <media/videobuf2-core.h>
> #include <media/videobuf2-vmalloc.h>
> +#include <media/tpg/v4l2-tpg.h>
>
> #include "vimc-common.h"
> #include "vimc-streamer.h"
> @@ -18,6 +19,7 @@ struct vimc_cap_device {
> struct v4l2_pix_format format;
> struct vb2_queue queue;
> struct list_head buf_list;
> + struct v4l2_mbus_framefmt mbus_format;
> /*
> * NOTE: in a real driver, a spin lock must be used to access the
> * queue because the frames are generated from a hardware interruption
> @@ -30,6 +32,7 @@ struct vimc_cap_device {
> u32 sequence;
> struct vimc_stream stream;
> struct media_pad pad;
> + u8 *frame;
> };
>
> static const struct v4l2_pix_format fmt_default = {
> @@ -344,7 +347,7 @@ void vimc_cap_rm(struct vimc_device *vimc, struct vimc_ent_device *ved)
> }
>
> static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
> - const void *frame)
> + void *frame)
should be alined to the beginning of the '('
> {
> struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
> ved);
> @@ -382,6 +385,45 @@ static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
> return NULL;
> }
>
> +static void *vimc_cap_process_tpg(struct vimc_ent_device *ved,
> + void *sink_tpg)
> +{
> + struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
> + ved)the whole part starting with `container_of` can be in a new line
> + struct vimc_cap_buffer *vimc_buf;
> + void *vbuf;
> +
> + spin_lock(&vcap->qlock);
> +
> + /* Get the first entry of the list */
> + vimc_buf = list_first_entry_or_null(&vcap->buf_list,
> + typeof(*vimc_buf), list);
> + if (!vimc_buf) {
> + spin_unlock(&vcap->qlock);
> + return ERR_PTR(-EAGAIN);
> + }
> +
> + /* Remove this entry from the list */
> + list_del(&vimc_buf->list);
> +
> + spin_unlock(&vcap->qlock);
> +
> + /* Fill the buffer */
> + vimc_buf->vb2.vb2_buf.timestamp = ktime_get_ns();
> + vimc_buf->vb2.sequence = vcap->sequence++;
> + vimc_buf->vb2.field = vcap->format.field;
> +
> + vbuf = vb2_plane_vaddr(&vimc_buf->vb2.vb2_buf, 0);
> +
> + tpg_fill_plane_buffer((struct tpg_data *)sink_tpg, 0, 0, vbuf);
> +
> + /* Set it as ready */
> + vb2_set_plane_payload(&vimc_buf->vb2.vb2_buf, 0,
> + vcap->format.sizeimage);
> + vb2_buffer_done(&vimc_buf->vb2.vb2_buf, VB2_BUF_STATE_DONE);
> + return NULL;
> +}
This function share big part of code with vimc_cap_process_frame,
so maybe write a static function used by both of them
> +
> struct vimc_ent_device *vimc_cap_add(struct vimc_device *vimc,
> const char *vcfg_name)
> {
> @@ -441,7 +483,18 @@ struct vimc_ent_device *vimc_cap_add(struct vimc_device *vimc,
>
> /* Fill the vimc_ent_device struct */
> vcap->ved.ent = &vcap->vdev.entity;
> - vcap->ved.process_frame = vimc_cap_process_frame;
> +
> + switch(vimc_op_mode) {
> + case VIMC_OP_MODE_FRAME:
> + vcap->ved.process_data = vimc_cap_process_frame;
> + break;
> + case VIMC_OP_MODE_OPTMIZED:
> + vcap->ved.process_data = vimc_cap_process_tpg;
> + break;
> + default:
> + vcap->ved.process_data = vimc_cap_process_frame;
> + break;
> + }
> vcap->ved.vdev_get_format = vimc_cap_get_format;
> vcap->ved.dev = &vimc->pdev.dev;
>
> diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
> index 87eb8259c2a8..9b48b2f34f34 100644
> --- a/drivers/media/platform/vimc/vimc-common.h
> +++ b/drivers/media/platform/vimc/vimc-common.h
> @@ -15,6 +15,11 @@
>
> #define VIMC_PDEV_NAME "vimc"
>
> +#define VIMC_OP_MODE_FRAME 1
> +#define VIMC_OP_MODE_OPTMIZED 2
> +
> +extern unsigned int vimc_op_mode;
> +
> /* VIMC-specific controls */
> #define VIMC_CID_VIMC_BASE (0x00f00000 | 0xf000)
> #define VIMC_CID_VIMC_CLASS (0x00f00000 | 1)
> @@ -97,8 +102,8 @@ struct vimc_pix_map {
> struct vimc_ent_device {
> struct device *dev;
> struct media_entity *ent;
> - void * (*process_frame)(struct vimc_ent_device *ved,
> - const void *frame);
> + void * (*process_data)(struct vimc_ent_device *ved,
> + void *data);
> void (*vdev_get_format)(struct vimc_ent_device *ved,
> struct v4l2_pix_format *fmt);
> };
> diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c
> index 97a272f3350a..9acf006c7b26 100644
> --- a/drivers/media/platform/vimc/vimc-core.c
> +++ b/drivers/media/platform/vimc/vimc-core.c
> @@ -23,6 +23,10 @@
> .flags = link_flags, \
> }
>
> +unsigned int vimc_op_mode = VIMC_OP_MODE_FRAME;
> +module_param(vimc_op_mode, uint, 0000);
> +MODULE_PARM_DESC(vimc_op_mode, " the operation mode");
> +
this should be documented in
Documentation/media/v4l-drivers/vimc.rst
similar to how sca_mult is documented
> /* Structure which describes links between entities */
> struct vimc_ent_link {
> unsigned int src_ent;
> @@ -275,6 +279,8 @@ static int vimc_probe(struct platform_device *pdev)
> media_device_init(&vimc->mdev);
>
> ret = vimc_register_devices(vimc);
> + dev_err(&pdev->dev, "OP MODE %d", vimc_op_mode);
> +
why an error debug?
> if (ret) {
> media_device_cleanup(&vimc->mdev);
> return ret;
> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
> index 5d1b67d684bb..793953dd499b 100644
> --- a/drivers/media/platform/vimc/vimc-debayer.c
> +++ b/drivers/media/platform/vimc/vimc-debayer.c
> @@ -12,6 +12,7 @@
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-event.h>
> #include <media/v4l2-subdev.h>
> +#include <media/tpg/v4l2-tpg.h>
>
> #include "vimc-common.h"
>
> @@ -455,7 +456,7 @@ static void vimc_deb_calc_rgb_sink(struct vimc_deb_device *vdeb,
> }
>
> static void *vimc_deb_process_frame(struct vimc_ent_device *ved,
> - const void *sink_frame)
> + void *sink_frame)
> {
> struct vimc_deb_device *vdeb = container_of(ved, struct vimc_deb_device,
> ved);
> @@ -494,6 +495,14 @@ static const struct v4l2_ctrl_ops vimc_deb_ctrl_ops = {
> .s_ctrl = vimc_deb_s_ctrl,
> };
>
> +static void *vimc_deb_process_tpg(struct vimc_ent_device *ved,
> + void *sink_tpg)
> +{
> + //TODO: I dont know what to do here actually
neither I :\
> + ((struct tpg_data *)sink_tpg)->color_enc = TGP_COLOR_ENC_RGB;
> + return sink_tpg;
> +}
> +
> static void vimc_deb_release(struct v4l2_subdev *sd)
> {
> struct vimc_deb_device *vdeb =
> @@ -568,9 +577,19 @@ struct vimc_ent_device *vimc_deb_add(struct vimc_device *vimc,
> if (ret)
> goto err_free_hdl;
>
> - vdeb->ved.process_frame = vimc_deb_process_frame;
> - vdeb->ved.dev = &vimc->pdev.dev;
> - vdeb->mean_win_size = vimc_deb_ctrl_mean_win_size.def;
> + vdeb->ved.process_data = vimc_deb_process_frame;
> + switch(vimc_op_mode) {
> + case VIMC_OP_MODE_FRAME:
> + vdeb->ved.process_data = vimc_deb_process_frame;
> + break;
> + case VIMC_OP_MODE_OPTMIZED:
> + vdeb->ved.process_data = vimc_deb_process_tpg;
> + break;
> + default:
> + vdeb->ved.process_data = vimc_deb_process_frame;
> + break;
> + }
> + vdeb->dev = &vimc->pdev.dev;
>
> /* Initialize the frame format */
> vdeb->sink_fmt = sink_fmt_default;
> diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
> index 2f88a7d9d67b..eed35400090d 100644
> --- a/drivers/media/platform/vimc/vimc-scaler.c
> +++ b/drivers/media/platform/vimc/vimc-scaler.c
> @@ -9,6 +9,7 @@
> #include <linux/vmalloc.h>
> #include <linux/v4l2-mediabus.h>
> #include <media/v4l2-subdev.h>
> +#include <media/tpg/v4l2-tpg.h>
>
> #include "vimc-common.h"
>
> @@ -317,7 +318,7 @@ static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca,
> }
>
> static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
> - const void *sink_frame)
> + void *sink_frame)
> {
> struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
> ved);
> @@ -331,10 +332,26 @@ static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
> return vsca->src_frame;
> };
>
> +static void *vimc_sca_process_tpg(struct vimc_ent_device *ved,
> + void *sink_tpg)
> +{
> + struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
> + ved);
> + const struct vimc_pix_map *vpix =
> + vimc_pix_map_by_code(vsca->sink_fmt.code);
> + struct tpg_data *tpg = (struct tpg_data *)sink_tpg;
> + tpg_reset_source(tpg, vsca->sink_fmt.width*sca_mult,
the '*' of the multiplication should be surrounded by spaces,
script/checkpatch.pl catches issues like that.
> + vsca->sink_fmt.height*sca_mult, vsca->sink_fmt.field);
> + tpg_s_bytesperline(tpg, 0, vsca->sink_fmt.width * vpix->bpp * sca_mult);
> + tpg_s_buf_height(tpg, tpg->src_height * sca_mult);
> + tpg_s_fourcc(tpg, vpix->pixelformat);
> + return sink_tpg;
> +}
> +
> static void vimc_sca_release(struct v4l2_subdev *sd)
> {
> struct vimc_sca_device *vsca =
> - container_of(sd, struct vimc_sca_device, sd);
> + container_of(sd, struct vimc_sca_device, sd);
This is just identation fix? I think better not to add it since it is not related to the patch
>
> media_entity_cleanup(vsca->ved.ent);
> kfree(vsca);
> @@ -378,8 +395,18 @@ struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
> return NULL;
> }
>
> - vsca->ved.process_frame = vimc_sca_process_frame;
> - vsca->ved.dev = &vimc->pdev.dev;
> + switch(vimc_op_mode) {
> + case VIMC_OP_MODE_FRAME:
> + vsca->ved.process_data = vimc_sca_process_frame;
> + break;
> + case VIMC_OP_MODE_OPTMIZED:
> + vsca->ved.process_data = vimc_sca_process_tpg;
> + break;
> + default:
> + vsca->ved.process_data = vimc_sca_process_frame;
> + break;
> + }
> + vsca->dev = &vimc->pdev.dev;
>
> /* Initialize the frame format */
> vsca->sink_fmt = sink_fmt_default;
> diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
> index 32380f504591..0305e2c693c6 100644
> --- a/drivers/media/platform/vimc/vimc-sensor.c
> +++ b/drivers/media/platform/vimc/vimc-sensor.c
> @@ -183,7 +183,7 @@ static const struct v4l2_subdev_pad_ops vimc_sen_pad_ops = {
> };
>
> static void *vimc_sen_process_frame(struct vimc_ent_device *ved,
> - const void *sink_frame)
> + void *sink_frame)
> {
> struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device,
> ved);
> @@ -192,6 +192,14 @@ static void *vimc_sen_process_frame(struct vimc_ent_device *ved,
> return vsen->frame;
> }
>
> +static void *vimc_sen_process_tpg(struct vimc_ent_device *ved,
> + void *sink_tpg)
> +{
> + struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device,
> + ved);
> + return &vsen->tpg;
> +}
> +
> static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
> {
> struct vimc_sen_device *vsen =
> @@ -369,8 +377,18 @@ struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
> if (ret)
> goto err_free_tpg;
>
> - vsen->ved.process_frame = vimc_sen_process_frame;
> - vsen->ved.dev = &vimc->pdev.dev;
> + switch(vimc_op_mode) {
> + case VIMC_OP_MODE_FRAME:
> + vsen->ved.process_data = vimc_sen_process_frame;
> + break;
> + case VIMC_OP_MODE_OPTMIZED:
> + vsen->ved.process_data = vimc_sen_process_tpg;
> + break;
> + default:
> + vsen->ved.process_data = vimc_sen_process_frame;
> + break;
> + }
> + vsen->dev = &vimc->pdev.dev;
this switch case is repteaing, maybe add it to a function in vimc-common.c
recieving the two funtions as arguments
>
> /* Initialize the frame format */
> vsen->mbus_format = fmt_default;
> diff --git a/drivers/media/platform/vimc/vimc-streamer.c b/drivers/media/platform/vimc/vimc-streamer.c
> index cd6b55433c9e..5fcf77391434 100644
> --- a/drivers/media/platform/vimc/vimc-streamer.c
> +++ b/drivers/media/platform/vimc/vimc-streamer.c
> @@ -159,7 +159,7 @@ static int vimc_streamer_thread(void *data)
> break;
>
> for (i = stream->pipe_size - 1; i >= 0; i--) {
> - frame = stream->ved_pipeline[i]->process_frame(
> + frame = stream->ved_pipeline[i]->process_data(
> stream->ved_pipeline[i], frame);
> if (!frame || IS_ERR(frame))
> break;
>
Thanks,
Dafna
next prev parent reply other threads:[~2019-12-04 10:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-03 22:56 [RFC PATCH] media: vimc: Add optimized mode Lucas A. M. Magalhães
2019-12-04 10:45 ` Dafna Hirschfeld [this message]
2019-12-19 13:23 ` Dafna Hirschfeld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a299c78d-ac09-49af-feb3-af3a7fb3b442@collabora.com \
--to=dafna.hirschfeld@collabora.com \
--cc=dafna3@gmail.com \
--cc=helen.koike@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=lkcamp@lists.libreplanetbr.org \
--cc=lucmaga@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).