From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from osg.samsung.com ([64.30.133.232]:52328 "EHLO osg.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752157AbdK2TIz (ORCPT ); Wed, 29 Nov 2017 14:08:55 -0500 From: Mauro Carvalho Chehab Cc: Mauro Carvalho Chehab , Linux Media Mailing List , Mauro Carvalho Chehab , Luis Oliveira , Bluecherry Maintainers , Anton Sviridenko , Andrey Utkin , Ismael Luceno , Kieran Bingham , Jean-Christophe Trotin , Benoit Parrot , Patrice Chotard , Hans Verkuil , Sakari Ailus , Kees Cook , Julia Lawall , Santosh Kumar Singh , Bhumika Goyal , Sean Young , Arvind Yadav , Andi Shyti , Andrew Morton , Piotr Oleszczyk , Alexey Dobriyan , Andrey Konovalov , Colin Ian King , Laurent Pinchart , "Gustavo A. R. Silva" , linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 19/22] media: drivers: remove "/**" from non-kernel-doc comments Date: Wed, 29 Nov 2017 14:08:37 -0500 Message-Id: In-Reply-To: <73497577f67fbb917e40ab4328104ff310a7c356.1511982439.git.mchehab@s-opensource.com> References: <73497577f67fbb917e40ab4328104ff310a7c356.1511982439.git.mchehab@s-opensource.com> MIME-Version: 1.0 In-Reply-To: <73497577f67fbb917e40ab4328104ff310a7c356.1511982439.git.mchehab@s-opensource.com> References: <73497577f67fbb917e40ab4328104ff310a7c356.1511982439.git.mchehab@s-opensource.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To: unlisted-recipients:; (no To-header on input)@bombadil.infradead.org Sender: linux-media-owner@vger.kernel.org List-ID: Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/sp887x.c | 6 +++--- drivers/media/dvb-frontends/tua6100.c | 2 +- drivers/media/dvb-frontends/zl10036.c | 8 ++++---- drivers/media/i2c/ov5647.c | 4 ++-- drivers/media/pci/solo6x10/solo6x10-enc.c | 2 +- drivers/media/platform/rcar_fdp1.c | 2 +- drivers/media/platform/sh_veu.c | 2 +- drivers/media/platform/sti/hva/hva-h264.c | 18 +++++++++++++----- drivers/media/platform/ti-vpe/vpe.c | 2 +- drivers/media/platform/vim2m.c | 2 +- drivers/media/rc/st_rc.c | 6 +++--- drivers/media/rc/streamzap.c | 6 +++--- drivers/media/usb/dvb-usb/cinergyT2-fe.c | 2 +- drivers/media/usb/dvb-usb/dib0700_devices.c | 8 ++++---- drivers/media/usb/dvb-usb/friio-fe.c | 2 +- drivers/media/usb/dvb-usb/friio.c | 2 +- drivers/media/usb/gspca/ov519.c | 2 +- drivers/media/usb/pwc/pwc-dec23.c | 7 +++---- drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 6 +++--- 19 files changed, 48 insertions(+), 41 deletions(-) diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c index 7c511c3cd4ca..d2c402b52c6e 100644 --- a/drivers/media/dvb-frontends/sp887x.c +++ b/drivers/media/dvb-frontends/sp887x.c @@ -57,7 +57,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data) int ret; if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) { - /** + /* * in case of soft reset we ignore ACK errors... */ if (!(reg == 0xf1a && data == 0x000 && @@ -130,7 +130,7 @@ static void sp887x_setup_agc (struct sp887x_state* state) #define BLOCKSIZE 30 #define FW_SIZE 0x4000 -/** +/* * load firmware and setup MPEG interface... */ static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw) @@ -279,7 +279,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05) return 0; } -/** +/* * estimates division of two 24bit numbers, * derived from the ves1820/stv0299 driver code */ diff --git a/drivers/media/dvb-frontends/tua6100.c b/drivers/media/dvb-frontends/tua6100.c index 18e6d4c5be21..1d41abd47f04 100644 --- a/drivers/media/dvb-frontends/tua6100.c +++ b/drivers/media/dvb-frontends/tua6100.c @@ -1,4 +1,4 @@ -/** +/* * Driver for Infineon tua6100 pll. * * (c) 2006 Andrew de Quincey diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c index 062282739ce5..89dd65ae88ad 100644 --- a/drivers/media/dvb-frontends/zl10036.c +++ b/drivers/media/dvb-frontends/zl10036.c @@ -1,4 +1,4 @@ -/** +/* * Driver for Zarlink zl10036 DVB-S silicon tuner * * Copyright (C) 2006 Tino Reichardt @@ -157,7 +157,7 @@ static int zl10036_sleep(struct dvb_frontend *fe) return ret; } -/** +/* * register map of the ZL10036/ZL10038 * * reg[default] content @@ -219,7 +219,7 @@ static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw) if (fbw <= 28820) { br = _BR_MAXIMUM; } else { - /** + /* * f(bw)=34,6MHz f(xtal)=10.111MHz * br = (10111/34600) * 63 * 1/K = 14; */ @@ -315,7 +315,7 @@ static int zl10036_set_params(struct dvb_frontend *fe) || (frequency > fe->ops.info.frequency_max)) return -EINVAL; - /** + /* * alpha = 1.35 for dvb-s * fBW = (alpha*symbolrate)/(2*0.8) * 1.35 / (2*0.8) = 27 / 32 diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c index 34179d232a35..da39c49de503 100644 --- a/drivers/media/i2c/ov5647.c +++ b/drivers/media/i2c/ov5647.c @@ -428,8 +428,8 @@ static int ov5647_sensor_set_register(struct v4l2_subdev *sd, } #endif -/** - * @short Subdev core operations registration +/* + * Subdev core operations registration */ static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = { .s_power = ov5647_sensor_power, diff --git a/drivers/media/pci/solo6x10/solo6x10-enc.c b/drivers/media/pci/solo6x10/solo6x10-enc.c index d28211bb9674..58d6b5131dd0 100644 --- a/drivers/media/pci/solo6x10/solo6x10-enc.c +++ b/drivers/media/pci/solo6x10/solo6x10-enc.c @@ -175,7 +175,7 @@ int solo_osd_print(struct solo_enc_dev *solo_enc) return 0; } -/** +/* * Set channel Quality Profile (0-3). */ void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch, diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c index 3245bc45f4a0..b13dec3081e5 100644 --- a/drivers/media/platform/rcar_fdp1.c +++ b/drivers/media/platform/rcar_fdp1.c @@ -1132,7 +1132,7 @@ static int fdp1_device_process(struct fdp1_ctx *ctx) * mem2mem callbacks */ -/** +/* * job_ready() - check whether an instance is ready to be scheduled to run */ static int fdp1_m2m_job_ready(void *priv) diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c index 15a562af13c7..dedc1b024f6f 100644 --- a/drivers/media/platform/sh_veu.c +++ b/drivers/media/platform/sh_veu.c @@ -267,7 +267,7 @@ static void sh_veu_process(struct sh_veu_dev *veu, sh_veu_reg_write(veu, VEU_EIER, 1); /* enable interrupt in VEU */ } -/** +/* * sh_veu_device_run() - prepares and starts the device * * This will be called by the framework when it decides to schedule a particular diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c index a7e5eed17ada..17f1eb0ba957 100644 --- a/drivers/media/platform/sti/hva/hva-h264.c +++ b/drivers/media/platform/sti/hva/hva-h264.c @@ -134,7 +134,7 @@ enum hva_h264_sei_payload_type { SEI_FRAME_PACKING_ARRANGEMENT = 45 }; -/** +/* * stereo Video Info struct */ struct hva_h264_stereo_video_sei { @@ -146,7 +146,9 @@ struct hva_h264_stereo_video_sei { u8 right_view_self_contained_flag; }; -/** +/* + * struct hva_h264_td + * * @frame_width: width in pixels of the buffer containing the input frame * @frame_height: height in pixels of the buffer containing the input frame * @frame_num: the parameter to be written in the slice header @@ -352,7 +354,9 @@ struct hva_h264_td { u32 addr_brc_in_out_parameter; }; -/** +/* + * struct hva_h264_slice_po + * * @ slice_size: slice size * @ slice_start_time: start time * @ slice_stop_time: stop time @@ -365,7 +369,9 @@ struct hva_h264_slice_po { u32 slice_num; }; -/** +/* + * struct hva_h264_po + * * @ bitstream_size: bitstream size * @ dct_bitstream_size: dtc bitstream size * @ stuffing_bits: number of stuffing bits inserted by the encoder @@ -391,7 +397,9 @@ struct hva_h264_task { struct hva_h264_po po; }; -/** +/* + * struct hva_h264_ctx + * * @seq_info: sequence information buffer * @ref_frame: reference frame buffer * @rec_frame: reconstructed frame buffer diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index 45bd10544189..e395aa85c8ad 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -926,7 +926,7 @@ static struct vpe_ctx *file2ctx(struct file *file) * mem2mem callbacks */ -/** +/* * job_ready() - check whether an instance is ready to be scheduled to run */ static int job_ready(void *priv) diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c index 7bf9fa2f8534..065483e62db4 100644 --- a/drivers/media/platform/vim2m.c +++ b/drivers/media/platform/vim2m.c @@ -343,7 +343,7 @@ static void schedule_irq(struct vim2m_dev *dev, int msec_timeout) * mem2mem callbacks */ -/** +/* * job_ready() - check whether an instance is ready to be scheduled to run */ static int job_ready(void *priv) diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c index a8e39c635f34..d2efd7b2c3bc 100644 --- a/drivers/media/rc/st_rc.c +++ b/drivers/media/rc/st_rc.c @@ -49,7 +49,7 @@ struct st_rc_device { #define IRB_RX_NOISE_SUPPR 0x5c /* noise suppression */ #define IRB_RX_POLARITY_INV 0x68 /* polarity inverter */ -/** +/* * IRQ set: Enable full FIFO 1 -> bit 3; * Enable overrun IRQ 1 -> bit 2; * Enable last symbol IRQ 1 -> bit 1: @@ -72,7 +72,7 @@ static void st_rc_send_lirc_timeout(struct rc_dev *rdev) ir_raw_event_store(rdev, &ev); } -/** +/* * RX graphical example to better understand the difference between ST IR block * output and standard definition used by LIRC (and most of the world!) * @@ -317,7 +317,7 @@ static int st_rc_probe(struct platform_device *pdev) device_init_wakeup(dev, true); dev_pm_set_wake_irq(dev, rc_dev->irq); - /** + /* * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW * lircd expects a long space first before a signal train to sync. */ diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index 4eebfcfc10f3..c9a70fda88a8 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -191,7 +191,7 @@ static void sz_push_half_space(struct streamzap_ir *sz, sz_push_full_space(sz, value & SZ_SPACE_MASK); } -/** +/* * streamzap_callback - usb IRQ handler callback * * This procedure is invoked on reception of data from @@ -321,7 +321,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) return NULL; } -/** +/* * streamzap_probe * * Called by usb-core to associated with a candidate device @@ -450,7 +450,7 @@ static int streamzap_probe(struct usb_interface *intf, return retval; } -/** +/* * streamzap_disconnect * * Called by the usb core when the device is removed from the system. diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c index f9772ad0a2a5..5a2f81311fb7 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -26,7 +26,7 @@ #include "cinergyT2.h" -/** +/* * convert linux-dvb frontend parameter set into TPS. * See ETSI ETS-300744, section 4.6.2, table 9 for details. * diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c index 92098c1b78e5..366b05529915 100644 --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -1677,10 +1677,10 @@ static int dib8096_set_param_override(struct dvb_frontend *fe) return -EINVAL; } - /** Update PLL if needed ratio **/ + /* Update PLL if needed ratio */ state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0); - /** Get optimize PLL ratio to remove spurious **/ + /* Get optimize PLL ratio to remove spurious */ pll_ratio = dib8090_compute_pll_parameters(fe); if (pll_ratio == 17) timf = 21387946; @@ -1691,7 +1691,7 @@ static int dib8096_set_param_override(struct dvb_frontend *fe) else timf = 18179756; - /** Update ratio **/ + /* Update ratio */ state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio); state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf); @@ -3357,7 +3357,7 @@ static int novatd_sleep_override(struct dvb_frontend* fe) return state->sleep(fe); } -/** +/* * novatd_frontend_attach - Nova-TD specific attach * * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c index 41261317bd5c..b6046e0e07f6 100644 --- a/drivers/media/usb/dvb-usb/friio-fe.c +++ b/drivers/media/usb/dvb-usb/friio-fe.c @@ -297,7 +297,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe) } -/** +/* * (reg, val) commad list to initialize this module. * captured on a Windows box. */ diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c index 62abe6c43a32..16875945e662 100644 --- a/drivers/media/usb/dvb-usb/friio.c +++ b/drivers/media/usb/dvb-usb/friio.c @@ -21,7 +21,7 @@ MODULE_PARM_DESC(debug, DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -/** +/* * Indirect I2C access to the PLL via FE. * whole I2C protocol data to the PLL is sent via the FE's I2C register. * This is done by a control msg to the FE with the I2C data accompanied, and diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c index f1537daf4e2e..1b30434b72ef 100644 --- a/drivers/media/usb/gspca/ov519.c +++ b/drivers/media/usb/gspca/ov519.c @@ -1,4 +1,4 @@ -/** +/* * OV519 driver * * Copyright (C) 2008-2011 Jean-François Moine diff --git a/drivers/media/usb/pwc/pwc-dec23.c b/drivers/media/usb/pwc/pwc-dec23.c index 3792fedff951..1283b3bd9800 100644 --- a/drivers/media/usb/pwc/pwc-dec23.c +++ b/drivers/media/usb/pwc/pwc-dec23.c @@ -649,11 +649,10 @@ static void DecompressBand23(struct pwc_dec23_private *pdec, } /** - * * Uncompress a pwc23 buffer. - * - * src: raw data - * dst: image output + * @pdev: pointer to pwc device's internal struct + * @src: raw data + * @dst: image output */ void pwc_dec23_decompress(struct pwc_device *pdev, const void *src, diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c index b842f367249f..a142b9dc0feb 100644 --- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c @@ -76,7 +76,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define TTUSB_REV_2_2 0x22 #define TTUSB_BUDGET_NAME "ttusb_stc_fw" -/** +/* * since we're casting (struct ttusb*) <-> (struct dvb_demux*) around * the dvb_demux field must be the first in struct!! */ @@ -713,7 +713,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) } } - /** + /* * if length is valid and we reached the end: * goto next muxpack */ @@ -729,7 +729,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) /* maximum bytes, until we know the length */ ttusb->muxpack_len = 2; - /** + /* * no muxpacks left? * return to search-sync state */ -- 2.14.3