[PATCH v2 00/79] Address some issues with PM runtime at media subsystem

[PATCH v2 00/79] Address some issues with PM runtime at media subsystem

[Mauro Carvalho Chehab]

During the review of the patches from unm.edu, one of the patterns
I noticed is the amount of patches trying to fix pm_runtime_get_sync()
calls.

After analyzing the feedback from version 1 of this series, I noticed
a few other weird behaviors at the PM runtime resume code. So, this
series start addressing some bugs and issues at the current code.
Then, it gets rid of pm_runtime_get_sync() at the media subsystem
(with 2 exceptions).

It should be noticed that
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added a new method to does a pm_runtime get, which increments
the usage count only on success.

The rationale of getting rid of pm_runtime_get_sync() is:

1. despite its name, this is actually a PM runtime resume call,
   but some developers didn't seem to realize that, as I got this
   pattern on some drivers:

        pm_runtime_get_sync(&client->dev);
        pm_runtime_disable(&client->dev);
        pm_runtime_set_suspended(&client->dev);
        pm_runtime_put_noidle(&client->dev);

   It makes no sense to resume PM just to suspend it again ;-)

2. Usual *_get() methods only increment their use count on success,
   but pm_runtime_get_sync() increments it unconditionally. Due to
   that, several drivers were mistakenly not calling
   pm_runtime_put_noidle() when it fails;

3. The name of the new variant is a lot clearer:
	pm_runtime_resume_and_get()
    As its same clearly says that this is a PM runtime resume function,
    that also increments the usage counter on success;

4. Consistency: we did similar changes subsystem wide with
   for instance strlcpy() and strcpy() that got replaced by
   strscpy(). Having all drivers using the same known-to-be-safe
   methods is a good thing;

5. Prevent newer drivers to copy-and-paste a code that it would
   be easier to break if they don't truly understand what's behind
   the scenes.

This series replace places  pm_runtime_get_sync(), by calling
pm_runtime_resume_and_get() instead.

This should help to avoid future mistakes like that, as people
tend to use the existing drivers as examples for newer ones.

compile-tested only.

Patches 1 to 7 fix some issues that already exists at the current
PM runtime code;

patches 8 to 20 fix some usage_count problems that still exists
at the media subsystem;

patches 21 to 78 repaces pm_runtime_get_sync() by 
pm_runtime_resume_and_get();

Patch 79 (and a hunk on patch 78) documents the two exceptions
where pm_runtime_get_sync() will still be used for now.

Mauro Carvalho Chehab (79):
  media: venus: fix PM runtime logic at venus_sys_error_handler()
  media: i2c: ccs-core: return the right error code at suspend
  media: i2c: mt9m001: don't resume at remove time
  media: i2c: ov7740: don't resume at remove time
  media: i2c: video-i2c: don't resume at remove time
  media: exynos-gsc: don't resume at remove time
  media: atmel: properly get pm_runtime
  media: marvel-ccic: fix some issues when getting pm_runtime
  media: mdk-mdp: fix pm_runtime_get_sync() usage count
  media: rcar_fdp1: fix pm_runtime_get_sync() usage count
  media: rga-buf: use pm_runtime_resume_and_get()
  media: renesas-ceu: Properly check for PM errors
  media: s5p: fix pm_runtime_get_sync() usage count
  media: am437x: fix pm_runtime_get_sync() usage count
  media: sh_vou: fix pm_runtime_get_sync() usage count
  media: mtk-vcodec: fix pm_runtime_get_sync() usage count
  media: s5p-jpeg: fix pm_runtime_get_sync() usage count
  media: delta-v4l2: fix pm_runtime_get_sync() usage count
  media: sun8i_rotate: fix pm_runtime_get_sync() usage count
  staging: media: rkvdec: fix pm_runtime_get_sync() usage count
  staging: media: atomisp_fops: use pm_runtime_resume_and_get()
  staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()
  staging: media: ipu3: use pm_runtime_resume_and_get()
  staging: media: cedrus_video: use pm_runtime_resume_and_get()
  staging: media: vde: use pm_runtime_resume_and_get()
  staging: media: csi: use pm_runtime_resume_and_get()
  staging: media: vi: use pm_runtime_resume_and_get()
  media: i2c: ak7375: use pm_runtime_resume_and_get()
  media: i2c: ccs-core: use pm_runtime_resume_and_get()
  media: i2c: dw9714: use pm_runtime_resume_and_get()
  media: i2c: dw9768: use pm_runtime_resume_and_get()
  media: i2c: dw9807-vcm: use pm_runtime_resume_and_get()
  media: i2c: hi556: use pm_runtime_resume_and_get()
  media: i2c: imx214: use pm_runtime_resume_and_get()
  media: i2c: imx219: use pm_runtime_resume_and_get()
  media: i2c: imx258: use pm_runtime_resume_and_get()
  media: i2c: imx274: use pm_runtime_resume_and_get()
  media: i2c: imx290: use pm_runtime_resume_and_get()
  media: i2c: imx319: use pm_runtime_resume_and_get()
  media: i2c: imx334: use pm_runtime_resume_and_get()
  media: i2c: imx355: use pm_runtime_resume_and_get()
  media: i2c: mt9m001: use pm_runtime_resume_and_get()
  media: i2c: ov02a10: use pm_runtime_resume_and_get()
  media: i2c: ov13858: use pm_runtime_resume_and_get()
  media: i2c: ov2659: use pm_runtime_resume_and_get()
  media: i2c: ov2685: use pm_runtime_resume_and_get()
  media: i2c: ov2740: use pm_runtime_resume_and_get()
  media: i2c: ov5647: use pm_runtime_resume_and_get()
  media: i2c: ov5648: use pm_runtime_resume_and_get()
  media: i2c: ov5670: use pm_runtime_resume_and_get()
  media: i2c: ov5675: use pm_runtime_resume_and_get()
  media: i2c: ov5695: use pm_runtime_resume_and_get()
  media: i2c: ov7740: use pm_runtime_resume_and_get()
  media: i2c: ov8856: use pm_runtime_resume_and_get()
  media: i2c: ov8865: use pm_runtime_resume_and_get()
  media: i2c: ov9734: use pm_runtime_resume_and_get()
  media: i2c: tvp5150: use pm_runtime_resume_and_get()
  media: i2c: video-i2c: use pm_runtime_resume_and_get()
  media: sti/hva: use pm_runtime_resume_and_get()
  media: ipu3: use pm_runtime_resume_and_get()
  media: coda: use pm_runtime_resume_and_get()
  media: exynos4-is: use pm_runtime_resume_and_get()
  media: exynos-gsc: use pm_runtime_resume_and_get()
  media: mtk-jpeg: use pm_runtime_resume_and_get()
  media: camss: use pm_runtime_resume_and_get()
  media: venus: use pm_runtime_resume_and_get()
  media: venus: vdec: use pm_runtime_resume_and_get()
  media: venus: venc: use pm_runtime_resume_and_get()
  media: rcar-fcp: use pm_runtime_resume_and_get()
  media: rkisp1: use pm_runtime_resume_and_get()
  media: s3c-camif: use pm_runtime_resume_and_get()
  media: s5p-mfc: use pm_runtime_resume_and_get()
  media: bdisp-v4l2: use pm_runtime_resume_and_get()
  media: stm32: use pm_runtime_resume_and_get()
  media: sunxi: use pm_runtime_resume_and_get()
  media: ti-vpe: use pm_runtime_resume_and_get()
  media: vsp1: use pm_runtime_resume_and_get()
  media: rcar-vin: use pm_runtime_resume_and_get()
  media: hantro: document the usage of pm_runtime_get_sync()

 drivers/media/cec/platform/s5p/s5p_cec.c      |  5 +++-
 drivers/media/i2c/ak7375.c                    | 10 +------
 drivers/media/i2c/ccs/ccs-core.c              | 18 +++++-------
 drivers/media/i2c/dw9714.c                    | 10 +------
 drivers/media/i2c/dw9768.c                    | 10 +------
 drivers/media/i2c/dw9807-vcm.c                | 10 +------
 drivers/media/i2c/hi556.c                     |  3 +-
 drivers/media/i2c/imx214.c                    |  6 ++--
 drivers/media/i2c/imx219.c                    |  6 ++--
 drivers/media/i2c/imx258.c                    |  6 ++--
 drivers/media/i2c/imx274.c                    |  3 +-
 drivers/media/i2c/imx290.c                    |  6 ++--
 drivers/media/i2c/imx319.c                    |  6 ++--
 drivers/media/i2c/imx334.c                    |  5 ++--
 drivers/media/i2c/imx355.c                    |  6 ++--
 drivers/media/i2c/mt9m001.c                   |  8 ++----
 drivers/media/i2c/ov02a10.c                   |  6 ++--
 drivers/media/i2c/ov13858.c                   |  6 ++--
 drivers/media/i2c/ov2659.c                    |  6 ++--
 drivers/media/i2c/ov2685.c                    |  7 ++---
 drivers/media/i2c/ov2740.c                    |  6 ++--
 drivers/media/i2c/ov5647.c                    |  9 +++---
 drivers/media/i2c/ov5648.c                    |  6 ++--
 drivers/media/i2c/ov5670.c                    |  6 ++--
 drivers/media/i2c/ov5675.c                    |  3 +-
 drivers/media/i2c/ov5695.c                    |  6 ++--
 drivers/media/i2c/ov7740.c                    |  8 ++----
 drivers/media/i2c/ov8856.c                    |  3 +-
 drivers/media/i2c/ov8865.c                    |  6 ++--
 drivers/media/i2c/ov9734.c                    |  3 +-
 drivers/media/i2c/tvp5150.c                   | 16 ++---------
 drivers/media/i2c/video-i2c.c                 | 14 +++-------
 drivers/media/pci/intel/ipu3/ipu3-cio2-main.c |  3 +-
 drivers/media/platform/am437x/am437x-vpfe.c   | 22 +++++++++++----
 drivers/media/platform/atmel/atmel-isc-base.c | 27 +++++++++++++-----
 drivers/media/platform/atmel/atmel-isi.c      | 19 ++++++++++---
 drivers/media/platform/coda/coda-common.c     |  5 ++--
 drivers/media/platform/exynos-gsc/gsc-core.c  |  3 --
 drivers/media/platform/exynos-gsc/gsc-m2m.c   |  2 +-
 .../media/platform/exynos4-is/fimc-capture.c  |  6 ++--
 drivers/media/platform/exynos4-is/fimc-is.c   |  4 +--
 .../platform/exynos4-is/fimc-isp-video.c      |  3 +-
 drivers/media/platform/exynos4-is/fimc-isp.c  |  7 ++---
 drivers/media/platform/exynos4-is/fimc-lite.c |  5 ++--
 drivers/media/platform/exynos4-is/fimc-m2m.c  |  2 +-
 drivers/media/platform/exynos4-is/media-dev.c |  8 ++----
 drivers/media/platform/exynos4-is/mipi-csis.c |  8 ++----
 .../media/platform/marvell-ccic/mcam-core.c   |  9 ++++--
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   |  4 +--
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c  |  6 ++--
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   |  4 +--
 .../media/platform/qcom/camss/camss-csid.c    |  6 ++--
 .../media/platform/qcom/camss/camss-csiphy.c  |  6 ++--
 .../media/platform/qcom/camss/camss-ispif.c   |  6 ++--
 drivers/media/platform/qcom/camss/camss-vfe.c |  5 ++--
 drivers/media/platform/qcom/venus/core.c      | 28 +++++++++++--------
 .../media/platform/qcom/venus/pm_helpers.c    | 10 +++----
 drivers/media/platform/qcom/venus/vdec.c      |  4 +--
 drivers/media/platform/qcom/venus/venc.c      |  5 ++--
 drivers/media/platform/rcar-fcp.c             |  6 ++--
 drivers/media/platform/rcar-vin/rcar-csi2.c   |  6 ++++
 drivers/media/platform/rcar-vin/rcar-dma.c    |  6 ++--
 drivers/media/platform/rcar-vin/rcar-v4l2.c   |  6 ++--
 drivers/media/platform/rcar_fdp1.c            | 12 ++++++--
 drivers/media/platform/renesas-ceu.c          |  4 +--
 drivers/media/platform/rockchip/rga/rga-buf.c |  3 +-
 drivers/media/platform/rockchip/rga/rga.c     |  4 ++-
 .../platform/rockchip/rkisp1/rkisp1-capture.c |  3 +-
 .../media/platform/s3c-camif/camif-capture.c  |  2 +-
 drivers/media/platform/s3c-camif/camif-core.c |  5 ++--
 drivers/media/platform/s5p-jpeg/jpeg-core.c   |  2 +-
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c   |  6 ++--
 drivers/media/platform/sh_vou.c               |  6 +++-
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c |  7 +++--
 drivers/media/platform/sti/delta/delta-v4l2.c |  4 +--
 drivers/media/platform/sti/hva/hva-hw.c       | 17 +++++------
 drivers/media/platform/stm32/stm32-dcmi.c     |  5 ++--
 .../platform/sunxi/sun4i-csi/sun4i_v4l2.c     |  6 ++--
 .../sunxi/sun8i-rotate/sun8i_rotate.c         |  2 +-
 drivers/media/platform/ti-vpe/cal-video.c     |  4 ++-
 drivers/media/platform/ti-vpe/cal.c           |  8 ++++--
 drivers/media/platform/ti-vpe/vpe.c           |  4 +--
 drivers/media/platform/vsp1/vsp1_drv.c        |  6 ++--
 .../staging/media/atomisp/pci/atomisp_fops.c  |  6 ++--
 drivers/staging/media/hantro/hantro_drv.c     |  7 +++++
 drivers/staging/media/imx/imx7-mipi-csis.c    |  7 ++---
 drivers/staging/media/ipu3/ipu3.c             |  3 +-
 drivers/staging/media/rkvdec/rkvdec.c         |  2 +-
 .../staging/media/sunxi/cedrus/cedrus_video.c |  6 ++--
 drivers/staging/media/tegra-vde/vde.c         | 16 +++++++----
 drivers/staging/media/tegra-video/csi.c       |  3 +-
 drivers/staging/media/tegra-video/vi.c        |  3 +-
 92 files changed, 298 insertions(+), 335 deletions(-)

-- 
2.30.2

[PATCH v2 01/79] media: venus: fix PM runtime logic at venus_sys_error_handler()

[Mauro Carvalho Chehab]

The venus_sys_error_handler() assumes that pm_runtime was
able to resume, as it does things like:

	while (pm_runtime_active(core->dev_dec) || pm_runtime_active(core->dev_enc))
		msleep(10);

Well, if, for whatever reason, this won't happen, the routine
won't do what's expected. So, check for the returned error
condition, warning if it returns an error.

Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/qcom/venus/core.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 54bac7ec14c5..fe63b9ab5b20 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -84,7 +84,11 @@ static void venus_sys_error_handler(struct work_struct *work)
 			container_of(work, struct venus_core, work.work);
 	int ret = 0;
 
-	pm_runtime_get_sync(core->dev);
+	ret = pm_runtime_get_sync(core->dev);
+	if (WARN_ON(ret < 0)) {
+		pm_runtime_put_noidle(core->dev);
+		return ret;
+	}
 
 	hfi_core_deinit(core, true);
 
@@ -106,9 +110,13 @@ static void venus_sys_error_handler(struct work_struct *work)
 
 	hfi_reinit(core);
 
-	pm_runtime_get_sync(core->dev);
+	ret = pm_runtime_get_sync(core->dev);
+	if (WARN_ON(ret < 0)) {
+		pm_runtime_put_noidle(core->dev);
+		return ret;
+	}
 
-	ret |= venus_boot(core);
+	ret = venus_boot(core);
 	ret |= hfi_core_resume(core, true);
 
 	enable_irq(core->irq);
-- 
2.30.2

[PATCH v2 02/79] media: i2c: ccs-core: return the right error code at suspend

[Mauro Carvalho Chehab]

If pm_runtime resume logic fails, return the error code
provided by it, instead of -EAGAIN, as, depending on what
caused it to fail, it may not be something that would be
recovered.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: cbba45d43631 ("[media] smiapp: Use runtime PM")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ccs/ccs-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index 9dc3f45da3dc..b05f409014b2 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -3093,7 +3093,7 @@ static int __maybe_unused ccs_suspend(struct device *dev)
 	if (rval < 0) {
 		pm_runtime_put_noidle(dev);
 
-		return -EAGAIN;
+		return rval;
 	}
 
 	if (sensor->streaming)
-- 
2.30.2

[PATCH v2 03/79] media: i2c: mt9m001: don't resume at remove time

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() at driver's removal time is
not right, as this will resume PM runtime. This is clearly
not what it is desired there, since it calls
pm_runtime_set_suspended() afterwards.

So, just remove pm runtime get/put logic from the device
removal logic.

Fixes: 8fcfc491c6ca ("media: mt9m001: switch s_power callback to runtime PM")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/mt9m001.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c
index 3b0ba8ed5233..ac1b380e6c03 100644
--- a/drivers/media/i2c/mt9m001.c
+++ b/drivers/media/i2c/mt9m001.c
@@ -834,14 +834,11 @@ static int mt9m001_remove(struct i2c_client *client)
 {
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
 
-	pm_runtime_get_sync(&client->dev);
-
 	v4l2_async_unregister_subdev(&mt9m001->subdev);
 	media_entity_cleanup(&mt9m001->subdev.entity);
 
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
-	pm_runtime_put_noidle(&client->dev);
 	mt9m001_power_off(&client->dev);
 
 	v4l2_ctrl_handler_free(&mt9m001->hdl);
-- 
2.30.2

[PATCH v2 04/79] media: i2c: ov7740: don't resume at remove time

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() at driver's removal time is
not right, as this will resume PM runtime. This is clearly
not what it is desired there, since it calls
pm_runtime_set_suspended() afterwards.

So, just remove pm runtime get/put logic from the device
removal logic.

Fixes: 39c5c4471b8d ("media: i2c: Add the ov7740 image sensor driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov7740.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index 47a9003d29d6..ed6904b2e8f5 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -1165,10 +1165,8 @@ static int ov7740_remove(struct i2c_client *client)
 	v4l2_async_unregister_subdev(sd);
 	ov7740_free_controls(ov7740);
 
-	pm_runtime_get_sync(&client->dev);
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
-	pm_runtime_put_noidle(&client->dev);
 
 	ov7740_set_power(ov7740, 0);
 	return 0;
-- 
2.30.2

[PATCH v2 05/79] media: i2c: video-i2c: don't resume at remove time

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() at driver's removal time is
not right, as this will resume PM runtime. This is clearly
not what it is desired there, since it calls
pm_runtime_set_suspended() afterwards.

So, just remove pm runtime get/put logic from the device
removal logic.

Fixes: 69d2a734c5dc ("media: video-i2c: support runtime PM")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/video-i2c.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/media/i2c/video-i2c.c b/drivers/media/i2c/video-i2c.c
index 0465832a4090..c9a774f4c8d2 100644
--- a/drivers/media/i2c/video-i2c.c
+++ b/drivers/media/i2c/video-i2c.c
@@ -893,10 +893,8 @@ static int video_i2c_remove(struct i2c_client *client)
 {
 	struct video_i2c_data *data = i2c_get_clientdata(client);
 
-	pm_runtime_get_sync(&client->dev);
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
-	pm_runtime_put_noidle(&client->dev);
 
 	if (data->chip->set_power)
 		data->chip->set_power(data, false);
-- 
2.30.2

[PATCH v2 06/79] media: exynos-gsc: don't resume at remove time

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() at driver's removal time is not
needed, as this will resume PM runtime. Also, the PM runtime
code at pm_runtime_disable() already calls it, if it detects
the need.

So, simplify the code by getting rid of that.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-core.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 9f41c2e7097a..70e86cdc1012 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -1210,8 +1210,6 @@ static int gsc_remove(struct platform_device *pdev)
 	struct gsc_dev *gsc = platform_get_drvdata(pdev);
 	int i;
 
-	pm_runtime_get_sync(&pdev->dev);
-
 	gsc_unregister_m2m_device(gsc);
 	v4l2_device_unregister(&gsc->v4l2_dev);
 
@@ -1219,7 +1217,6 @@ static int gsc_remove(struct platform_device *pdev)
 	for (i = 0; i < gsc->num_clocks; i++)
 		clk_disable_unprepare(gsc->clock[i]);
 
-	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
-- 
2.30.2

[PATCH v2 07/79] media: atmel: properly get pm_runtime

[Mauro Carvalho Chehab]

There are several issues in the way the atmel driver handles
pm_runtime_get_sync():

- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
  it doesn't check if the operation was suceeded.

Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.

With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++-----
 drivers/media/platform/atmel/atmel-isi.c      | 19 ++++++++++---
 2 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..02543fe42e9d 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
 static int isc_clk_prepare(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
+	int ret;
 
-	if (isc_clk->id == ISC_ISPCK)
-		pm_runtime_get_sync(isc_clk->dev);
+	if (isc_clk->id == ISC_ISPCK) {
+		ret = pm_runtime_resume_and_get(isc_clk->dev);
+		if (ret < 0)
+			return 0;
+	}
 
 	return isc_wait_clk_stable(hw);
 }
@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
 	u32 status;
+	int ret;
 
-	if (isc_clk->id == ISC_ISPCK)
-		pm_runtime_get_sync(isc_clk->dev);
+	if (isc_clk->id == ISC_ISPCK) {
+		ret = pm_runtime_resume_and_get(isc_clk->dev);
+		if (ret < 0)
+			return 0;
+	}
 
 	regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
 
@@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto err_start_stream;
 	}
 
-	pm_runtime_get_sync(isc->dev);
+	ret = pm_runtime_resume_and_get(isc->dev);
+	if (ret < 0)
+		goto err_pm_get;
 
 	ret = isc_configure(isc);
 	if (unlikely(ret))
@@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_configure:
 	pm_runtime_put_sync(isc->dev);
-
+err_pm_get:
 	v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
 
 err_start_stream:
@@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w)
 	u32 baysel;
 	unsigned long flags;
 	u32 min, max;
+	int ret;
 
 	/* streaming is not active anymore */
 	if (isc->stop)
@@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w)
 	ctrls->hist_id = hist_id;
 	baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
 
-	pm_runtime_get_sync(isc->dev);
+	ret = pm_runtime_resume_and_get(isc->dev);
+	if (ret < 0)
+		return;
 
 	/*
 	 * only update if we have all the required histograms and controls
diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
index 0514be6153df..6a433926726d 100644
--- a/drivers/media/platform/atmel/atmel-isi.c
+++ b/drivers/media/platform/atmel/atmel-isi.c
@@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 	struct frame_buffer *buf, *node;
 	int ret;
 
-	pm_runtime_get_sync(isi->dev);
+	ret = pm_runtime_resume_and_get(isi->dev);
+	if (ret < 0)
+		return ret;
 
 	/* Enable stream on the sub device */
 	ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
@@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
 	return 0;
 }
 
-static void isi_camera_set_bus_param(struct atmel_isi *isi)
+static int isi_camera_set_bus_param(struct atmel_isi *isi)
 {
 	u32 cfg1 = 0;
+	int ret;
 
 	/* set bus param for ISI */
 	if (isi->pdata.hsync_act_low)
@@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
 	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
 
 	/* Enable PM and peripheral clock before operate isi registers */
-	pm_runtime_get_sync(isi->dev);
+	ret = pm_runtime_resume_and_get(isi->dev);
+	if (ret < 0)
+		return ret;
 
 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 	isi_writel(isi, ISI_CFG1, cfg1);
 
 	pm_runtime_put(isi->dev);
+
+	return 0;
 }
 
 /* -----------------------------------------------------------------------*/
@@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
 		dev_err(isi->dev, "No supported mediabus format found\n");
 		return ret;
 	}
-	isi_camera_set_bus_param(isi);
+	ret = isi_camera_set_bus_param(isi);
+	if (ret) {
+		dev_err(isi->dev, "Can't wake up device\n");
+		return ret;
+	}
 
 	ret = isi_set_default_fmt(isi);
 	if (ret) {
-- 
2.30.2

[PATCH v2 08/79] media: marvel-ccic: fix some issues when getting pm_runtime

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() is bad, since even when it
returns an error, pm_runtime_put*() should be called.
So, use instead pm_runtime_resume_and_get().

While here, ensure that the error condition will be checked
during clock enable an media open() calls.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 141bf5d97a04..ea87110d9073 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -918,6 +918,7 @@ static int mclk_enable(struct clk_hw *hw)
 	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
 	int mclk_src;
 	int mclk_div;
+	int ret;
 
 	/*
 	 * Clock the sensor appropriately.  Controller clock should
@@ -931,7 +932,9 @@ static int mclk_enable(struct clk_hw *hw)
 		mclk_div = 2;
 	}
 
-	pm_runtime_get_sync(cam->dev);
+	ret = pm_runtime_resume_and_get(cam->dev);
+	if (ret < 0)
+		return ret;
 	clk_enable(cam->clk[0]);
 	mcam_reg_write(cam, REG_CLKCTRL, (mclk_src << 29) | mclk_div);
 	mcam_ctlr_power_up(cam);
@@ -1611,7 +1614,9 @@ static int mcam_v4l_open(struct file *filp)
 		ret = sensor_call(cam, core, s_power, 1);
 		if (ret)
 			goto out;
-		pm_runtime_get_sync(cam->dev);
+		ret = pm_runtime_resume_and_get(cam->dev);
+		if (ret < 0)
+			goto out;
 		__mcam_cam_reset(cam);
 		mcam_set_config_needed(cam, 1);
 	}
-- 
2.30.2

[PATCH v2 09/79] media: mdk-mdp: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
index ace4528cdc5e..f14779e7596e 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
@@ -391,12 +391,12 @@ static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct mtk_mdp_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->mdp_dev->pdev->dev);
 	if (ret < 0)
-		mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d",
+		mtk_mdp_dbg(1, "[%d] pm_runtime_resume_and_get failed:%d",
 			    ctx->id, ret);
 
-	return 0;
+	return ret;
 }
 
 static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx,
-- 
2.30.2

[PATCH v2 10/79] media: rcar_fdp1: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Also, right now, the driver is ignoring any troubles when
trying to do PM resume. So, add the proper error handling
for the code.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rcar_fdp1.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c
index 01c1fbb97bf6..c32d237af618 100644
--- a/drivers/media/platform/rcar_fdp1.c
+++ b/drivers/media/platform/rcar_fdp1.c
@@ -2140,7 +2140,13 @@ static int fdp1_open(struct file *file)
 	}
 
 	/* Perform any power management required */
-	pm_runtime_get_sync(fdp1->dev);
+	ret = pm_runtime_resume_and_get(fdp1->dev);
+	if (ret < 0) {
+		v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+		v4l2_ctrl_handler_free(&ctx->hdl);
+		kfree(ctx);
+		goto done;
+	}
 
 	v4l2_fh_add(&ctx->fh);
 
@@ -2351,7 +2357,9 @@ static int fdp1_probe(struct platform_device *pdev)
 
 	/* Power up the cells to read HW */
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(fdp1->dev);
+	ret = pm_runtime_resume_and_get(fdp1->dev);
+	if (ret < 0)
+		return ret;
 
 	hw_version = fdp1_read(fdp1, FD1_IP_INTDATA);
 	switch (hw_version) {
-- 
2.30.2

[PATCH v2 11/79] media: rga-buf: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
 drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
index bf9a75b75083..81508ed5abf3 100644
--- a/drivers/media/platform/rockchip/rga/rga-buf.c
+++ b/drivers/media/platform/rockchip/rga/rga-buf.c
@@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct rockchip_rga *rga = ctx->rga;
 	int ret;
 
-	ret = pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(rga->dev);
 		rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
 		return ret;
 	}
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index 9d122429706e..bf3fd71ec3af 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
 		goto unreg_video_dev;
 	}
 
-	pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
+	if (ret < 0)
+		goto unreg_video_dev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
-- 
2.30.2

[PATCH v2 12/79] media: renesas-ceu: Properly check for PM errors

[Mauro Carvalho Chehab]

Right now, the driver just assumes that PM runtime resume
worked, but it may fail.

Well, the pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.

So, using it is tricky. Let's replace it by the new
pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
and return an error if something bad happens.

This should ensure that the PM runtime usage_count will be
properly decremented if an error happens at open time.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/renesas-ceu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/renesas-ceu.c b/drivers/media/platform/renesas-ceu.c
index cd137101d41e..17f01b6e3fe0 100644
--- a/drivers/media/platform/renesas-ceu.c
+++ b/drivers/media/platform/renesas-ceu.c
@@ -1099,10 +1099,10 @@ static int ceu_open(struct file *file)
 
 	mutex_lock(&ceudev->mlock);
 	/* Causes soft-reset and sensor power on on first open */
-	pm_runtime_get_sync(ceudev->dev);
+	ret = pm_runtime_resume_and_get(ceudev->dev);
 	mutex_unlock(&ceudev->mlock);
 
-	return 0;
+	return ret;
 }
 
 static int ceu_release(struct file *file)
-- 
2.30.2

[PATCH v2 13/79] media: s5p: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/cec/platform/s5p/s5p_cec.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/cec/platform/s5p/s5p_cec.c b/drivers/media/cec/platform/s5p/s5p_cec.c
index 2a3e7ffefe0a..2250c1cbc64e 100644
--- a/drivers/media/cec/platform/s5p/s5p_cec.c
+++ b/drivers/media/cec/platform/s5p/s5p_cec.c
@@ -35,10 +35,13 @@ MODULE_PARM_DESC(debug, "debug level (0-2)");
 
 static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable)
 {
+	int ret;
 	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
 
 	if (enable) {
-		pm_runtime_get_sync(cec->dev);
+		ret = pm_runtime_resume_and_get(cec->dev);
+		if (ret < 0)
+			return ret;
 
 		s5p_cec_reset(cec);
 
-- 
2.30.2

[PATCH v2 14/79] media: am437x: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

While here, ensure that the driver will check if PM runtime
resumed at vpfe_initialize_device().

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/am437x/am437x-vpfe.c | 22 +++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
index 6cdc77dda0e4..bced526f30f2 100644
--- a/drivers/media/platform/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -1021,7 +1021,9 @@ static int vpfe_initialize_device(struct vpfe_device *vpfe)
 	if (ret)
 		return ret;
 
-	pm_runtime_get_sync(vpfe->pdev);
+	ret = pm_runtime_resume_and_get(vpfe->pdev);
+	if (ret < 0)
+		return ret;
 
 	vpfe_config_enable(&vpfe->ccdc, 1);
 
@@ -2443,7 +2445,11 @@ static int vpfe_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	/* for now just enable it here instead of waiting for the open */
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0) {
+		vpfe_err(vpfe, "Unable to resume device.\n");
+		goto probe_out_v4l2_unregister;
+	}
 
 	vpfe_ccdc_config_defaults(ccdc);
 
@@ -2527,10 +2533,11 @@ static int vpfe_suspend(struct device *dev)
 {
 	struct vpfe_device *vpfe = dev_get_drvdata(dev);
 	struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+	int ret;
 
 	/* only do full suspend if streaming has started */
 	if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
-		pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		vpfe_config_enable(ccdc, 1);
 
 		/* Save VPFE context */
@@ -2541,7 +2548,8 @@ static int vpfe_suspend(struct device *dev)
 		vpfe_config_enable(ccdc, 0);
 
 		/* Disable both master and slave clock */
-		pm_runtime_put_sync(dev);
+		if (ret >= 0)
+			pm_runtime_put_sync(dev);
 	}
 
 	/* Select sleep pin state */
@@ -2583,18 +2591,20 @@ static int vpfe_resume(struct device *dev)
 {
 	struct vpfe_device *vpfe = dev_get_drvdata(dev);
 	struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+	int ret;
 
 	/* only do full resume if streaming has started */
 	if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
 		/* Enable both master and slave clock */
-		pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		vpfe_config_enable(ccdc, 1);
 
 		/* Restore VPFE context */
 		vpfe_restore_context(ccdc);
 
 		vpfe_config_enable(ccdc, 0);
-		pm_runtime_put_sync(dev);
+		if (ret >= 0)
+			pm_runtime_put_sync(dev);
 	}
 
 	/* Select default pin state */
-- 
2.30.2

[PATCH v2 15/79] media: sh_vou: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

While here, check if the PM runtime error was caught at open time.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sh_vou.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c
index 4ac48441f22c..ca4310e26c49 100644
--- a/drivers/media/platform/sh_vou.c
+++ b/drivers/media/platform/sh_vou.c
@@ -1133,7 +1133,11 @@ static int sh_vou_open(struct file *file)
 	if (v4l2_fh_is_singular_file(file) &&
 	    vou_dev->status == SH_VOU_INITIALISING) {
 		/* First open */
-		pm_runtime_get_sync(vou_dev->v4l2_dev.dev);
+		err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
+		if (err < 0) {
+			v4l2_fh_release(file);
+			goto done_open;
+		}
 		err = sh_vou_hw_init(vou_dev);
 		if (err < 0) {
 			pm_runtime_put(vou_dev->v4l2_dev.dev);
-- 
2.30.2

[PATCH v2 16/79] media: mtk-vcodec: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index ddee7046ce42..fe096fe61c9d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -92,9 +92,9 @@ void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(pm->dev);
+	ret = pm_runtime_resume_and_get(pm->dev);
 	if (ret)
-		mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
+		mtk_v4l2_err("pm_runtime_resume_and_get fail %d", ret);
 }
 
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm)
-- 
2.30.2

[PATCH v2 17/79] media: s5p-jpeg: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 026111505f5a..c4f19418a460 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2568,7 +2568,7 @@ static int s5p_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct s5p_jpeg_ctx *ctx = vb2_get_drv_priv(q);
 	int ret;
 
-	ret = pm_runtime_get_sync(ctx->jpeg->dev);
+	ret = pm_runtime_resume_and_get(ctx->jpeg->dev);
 
 	return ret > 0 ? 0 : ret;
 }
-- 
2.30.2

[PATCH v2 18/79] media: delta-v4l2: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sti/delta/delta-v4l2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/delta/delta-v4l2.c b/drivers/media/platform/sti/delta/delta-v4l2.c
index c691b3d81549..9928b7c46a41 100644
--- a/drivers/media/platform/sti/delta/delta-v4l2.c
+++ b/drivers/media/platform/sti/delta/delta-v4l2.c
@@ -1277,9 +1277,9 @@ int delta_get_sync(struct delta_ctx *ctx)
 	int ret = 0;
 
 	/* enable the hardware */
-	ret = pm_runtime_get_sync(delta->dev);
+	ret = pm_runtime_resume_and_get(delta->dev);
 	if (ret < 0) {
-		dev_err(delta->dev, "%s pm_runtime_get_sync failed (%d)\n",
+		dev_err(delta->dev, "%s pm_runtime_resume_and_get failed (%d)\n",
 			__func__, ret);
 		return ret;
 	}
-- 
2.30.2

[PATCH v2 19/79] media: sun8i_rotate: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
index 3f81dd17755c..fbcca59a0517 100644
--- a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
+++ b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
@@ -494,7 +494,7 @@ static int rotate_start_streaming(struct vb2_queue *vq, unsigned int count)
 		struct device *dev = ctx->dev->dev;
 		int ret;
 
-		ret = pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0) {
 			dev_err(dev, "Failed to enable module\n");
 
-- 
2.30.2

[PATCH v2 20/79] staging: media: rkvdec: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/rkvdec/rkvdec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index d821661d30f3..8c17615f3a7a 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -658,7 +658,7 @@ static void rkvdec_device_run(void *priv)
 	if (WARN_ON(!desc))
 		return;
 
-	ret = pm_runtime_get_sync(rkvdec->dev);
+	ret = pm_runtime_resume_and_get(rkvdec->dev);
 	if (ret < 0) {
 		rkvdec_job_finish_no_pm(ctx, VB2_BUF_STATE_ERROR);
 		return;
-- 
2.30.2

[PATCH v2 21/79] staging: media: atomisp_fops: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/atomisp/pci/atomisp_fops.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index f1e6b2597853..26d05474a035 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -837,7 +837,7 @@ static int atomisp_open(struct file *file)
 	}
 
 	/* runtime power management, turn on ISP */
-	ret = pm_runtime_get_sync(vdev->v4l2_dev->dev);
+	ret = pm_runtime_resume_and_get(vdev->v4l2_dev->dev);
 	if (ret < 0) {
 		dev_err(isp->dev, "Failed to power on device\n");
 		goto error;
@@ -881,9 +881,9 @@ static int atomisp_open(struct file *file)
 
 css_error:
 	atomisp_css_uninit(isp);
-error:
-	hmm_pool_unregister(HMM_POOL_TYPE_DYNAMIC);
 	pm_runtime_put(vdev->v4l2_dev->dev);
+error:
+	hmm_pool_unregister(HMM_POOL_TYPE_DYNAMIC);
 	rt_mutex_unlock(&isp->mutex);
 	return ret;
 }
-- 
2.30.2

[PATCH v2 22/79] staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 025fdc488bd6..1dc680d94a46 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -695,11 +695,10 @@ static int mipi_csis_s_stream(struct v4l2_subdev *mipi_sd, int enable)
 
 		mipi_csis_clear_counters(state);
 
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
 		if (ret < 0 && ret != -ENOIOCTLCMD)
 			goto done;
-- 
2.30.2

[PATCH v2 23/79] staging: media: ipu3: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/ipu3/ipu3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/media/ipu3/ipu3.c b/drivers/staging/media/ipu3/ipu3.c
index ee1bba6bdcac..8e1e9e46e604 100644
--- a/drivers/staging/media/ipu3/ipu3.c
+++ b/drivers/staging/media/ipu3/ipu3.c
@@ -392,10 +392,9 @@ int imgu_s_stream(struct imgu_device *imgu, int enable)
 	}
 
 	/* Set Power */
-	r = pm_runtime_get_sync(dev);
+	r = pm_runtime_resume_and_get(dev);
 	if (r < 0) {
 		dev_err(dev, "failed to set imgu power\n");
-		pm_runtime_put(dev);
 		return r;
 	}
 
-- 
2.30.2

[PATCH v2 24/79] staging: media: cedrus_video: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..9ddd789d0b1f 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -490,11 +490,9 @@ static int cedrus_start_streaming(struct vb2_queue *vq, unsigned int count)
 	}
 
 	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
-		ret = pm_runtime_get_sync(dev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(dev->dev);
+		ret = pm_runtime_resume_and_get(dev->dev);
+		if (ret < 0)
 			goto err_cleanup;
-		}
 
 		if (dev->dec_ops[ctx->current_codec]->start) {
 			ret = dev->dec_ops[ctx->current_codec]->start(ctx);
-- 
2.30.2

[PATCH v2 25/79] staging: media: vde: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/tegra-vde/vde.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/media/tegra-vde/vde.c b/drivers/staging/media/tegra-vde/vde.c
index 28845b5bafaf..8936f140a246 100644
--- a/drivers/staging/media/tegra-vde/vde.c
+++ b/drivers/staging/media/tegra-vde/vde.c
@@ -775,9 +775,9 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde *vde,
 	if (ret)
 		goto release_dpb_frames;
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto put_runtime_pm;
+		goto unlock;
 
 	/*
 	 * We rely on the VDE registers reset value, otherwise VDE
@@ -843,6 +843,8 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde *vde,
 put_runtime_pm:
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
+
+unlock:
 	mutex_unlock(&vde->lock);
 
 release_dpb_frames:
@@ -1069,8 +1071,8 @@ static int tegra_vde_probe(struct platform_device *pdev)
 	 * power-cycle it in order to put hardware into a predictable lower
 	 * power state.
 	 */
-	pm_runtime_get_sync(dev);
-	pm_runtime_put(dev);
+	if (pm_runtime_resume_and_get(dev) >= 0)
+		pm_runtime_put(dev);
 
 	return 0;
 
@@ -1088,8 +1090,9 @@ static int tegra_vde_remove(struct platform_device *pdev)
 {
 	struct tegra_vde *vde = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
+	int ret;
 
-	pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	pm_runtime_dont_use_autosuspend(dev);
 	pm_runtime_disable(dev);
 
@@ -1097,7 +1100,8 @@ static int tegra_vde_remove(struct platform_device *pdev)
 	 * Balance RPM state, the VDE power domain is left ON and hardware
 	 * is clock-gated. It's safe to reboot machine now.
 	 */
-	pm_runtime_put_noidle(dev);
+	if (ret >= 0)
+		pm_runtime_put_noidle(dev);
 	clk_disable_unprepare(vde->clk);
 
 	misc_deregister(&vde->miscdev);
-- 
2.30.2

[PATCH v2 26/79] staging: media: csi: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/tegra-video/csi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/media/tegra-video/csi.c b/drivers/staging/media/tegra-video/csi.c
index 033a6935c26d..e938bf4c48b6 100644
--- a/drivers/staging/media/tegra-video/csi.c
+++ b/drivers/staging/media/tegra-video/csi.c
@@ -298,10 +298,9 @@ static int tegra_csi_enable_stream(struct v4l2_subdev *subdev)
 	struct tegra_csi *csi = csi_chan->csi;
 	int ret, err;
 
-	ret = pm_runtime_get_sync(csi->dev);
+	ret = pm_runtime_resume_and_get(csi->dev);
 	if (ret < 0) {
 		dev_err(csi->dev, "failed to get runtime PM: %d\n", ret);
-		pm_runtime_put_noidle(csi->dev);
 		return ret;
 	}
 
-- 
2.30.2

[PATCH v2 27/79] staging: media: vi: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/tegra-video/vi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/media/tegra-video/vi.c b/drivers/staging/media/tegra-video/vi.c
index 7a09061cda57..1298740a9c6c 100644
--- a/drivers/staging/media/tegra-video/vi.c
+++ b/drivers/staging/media/tegra-video/vi.c
@@ -297,10 +297,9 @@ static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
 	struct tegra_vi_channel *chan = vb2_get_drv_priv(vq);
 	int ret;
 
-	ret = pm_runtime_get_sync(chan->vi->dev);
+	ret = pm_runtime_resume_and_get(chan->vi->dev);
 	if (ret < 0) {
 		dev_err(chan->vi->dev, "failed to get runtime PM: %d\n", ret);
-		pm_runtime_put_noidle(chan->vi->dev);
 		return ret;
 	}
 
-- 
2.30.2

[PATCH v2 28/79] media: i2c: ak7375: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ak7375.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/media/i2c/ak7375.c b/drivers/media/i2c/ak7375.c
index e1f94ee0f48f..40b1a4aa846c 100644
--- a/drivers/media/i2c/ak7375.c
+++ b/drivers/media/i2c/ak7375.c
@@ -87,15 +87,7 @@ static const struct v4l2_ctrl_ops ak7375_vcm_ctrl_ops = {
 
 static int ak7375_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 {
-	int ret;
-
-	ret = pm_runtime_get_sync(sd->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(sd->dev);
-		return ret;
-	}
-
-	return 0;
+	return pm_runtime_resume_and_get(sd->dev);
 }
 
 static int ak7375_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-- 
2.30.2

[PATCH v2 29/79] media: i2c: ccs-core: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ccs/ccs-core.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index b05f409014b2..8cce80557128 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -1880,12 +1880,11 @@ static int ccs_pm_get_init(struct ccs_sensor *sensor)
 	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
 	int rval;
 
-	rval = pm_runtime_get_sync(&client->dev);
-	if (rval < 0) {
-		pm_runtime_put_noidle(&client->dev);
-
+	rval = pm_runtime_resume_and_get(&client->dev);
+	if (rval < 0)
 		return rval;
-	} else if (!rval) {
+
+	if (!rval) {
 		rval = v4l2_ctrl_handler_setup(&sensor->pixel_array->
 					       ctrl_handler);
 		if (rval)
@@ -3089,12 +3088,9 @@ static int __maybe_unused ccs_suspend(struct device *dev)
 	bool streaming = sensor->streaming;
 	int rval;
 
-	rval = pm_runtime_get_sync(dev);
-	if (rval < 0) {
-		pm_runtime_put_noidle(dev);
-
+	rval = pm_runtime_resume_and_get(dev);
+	if (rval < 0)
 		return rval;
-	}
 
 	if (sensor->streaming)
 		ccs_stop_streaming(sensor);
-- 
2.30.2

[PATCH v2 30/79] media: i2c: dw9714: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/dw9714.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
index 3f0b082f863f..c8b4292512dc 100644
--- a/drivers/media/i2c/dw9714.c
+++ b/drivers/media/i2c/dw9714.c
@@ -85,15 +85,7 @@ static const struct v4l2_ctrl_ops dw9714_vcm_ctrl_ops = {
 
 static int dw9714_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 {
-	int rval;
-
-	rval = pm_runtime_get_sync(sd->dev);
-	if (rval < 0) {
-		pm_runtime_put_noidle(sd->dev);
-		return rval;
-	}
-
-	return 0;
+	return pm_runtime_resume_and_get(sd->dev);
 }
 
 static int dw9714_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-- 
2.30.2

[PATCH v2 31/79] media: i2c: dw9768: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/dw9768.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/media/i2c/dw9768.c b/drivers/media/i2c/dw9768.c
index 8b8cb4b077b5..c086580efac7 100644
--- a/drivers/media/i2c/dw9768.c
+++ b/drivers/media/i2c/dw9768.c
@@ -374,15 +374,7 @@ static const struct v4l2_ctrl_ops dw9768_ctrl_ops = {
 
 static int dw9768_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 {
-	int ret;
-
-	ret = pm_runtime_get_sync(sd->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(sd->dev);
-		return ret;
-	}
-
-	return 0;
+	return pm_runtime_resume_and_get(sd->dev);
 }
 
 static int dw9768_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-- 
2.30.2

[PATCH v2 32/79] media: i2c: dw9807-vcm: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/dw9807-vcm.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/media/i2c/dw9807-vcm.c b/drivers/media/i2c/dw9807-vcm.c
index 438a44b76da8..95e06f13bc9e 100644
--- a/drivers/media/i2c/dw9807-vcm.c
+++ b/drivers/media/i2c/dw9807-vcm.c
@@ -130,15 +130,7 @@ static const struct v4l2_ctrl_ops dw9807_vcm_ctrl_ops = {
 
 static int dw9807_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 {
-	int rval;
-
-	rval = pm_runtime_get_sync(sd->dev);
-	if (rval < 0) {
-		pm_runtime_put_noidle(sd->dev);
-		return rval;
-	}
-
-	return 0;
+	return pm_runtime_resume_and_get(sd->dev);
 }
 
 static int dw9807_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-- 
2.30.2

[PATCH v2 33/79] media: i2c: hi556: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/hi556.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/i2c/hi556.c b/drivers/media/i2c/hi556.c
index 6f05c1138e3b..627ccfa34835 100644
--- a/drivers/media/i2c/hi556.c
+++ b/drivers/media/i2c/hi556.c
@@ -813,9 +813,8 @@ static int hi556_set_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&hi556->mutex);
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
 			mutex_unlock(&hi556->mutex);
 			return ret;
 		}
-- 
2.30.2

[PATCH v2 34/79] media: i2c: imx214: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx214.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index e8b281e432e8..1a770a530cf5 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -776,11 +776,9 @@ static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
 		return 0;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(imx214->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(imx214->dev);
+		ret = pm_runtime_resume_and_get(imx214->dev);
+		if (ret < 0)
 			return ret;
-		}
 
 		ret = imx214_start_streaming(imx214);
 		if (ret < 0)
-- 
2.30.2

[PATCH v2 35/79] media: i2c: imx219: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx219.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 1054ffedaefd..74a0bf9b088b 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -1035,11 +1035,9 @@ static int imx219_start_streaming(struct imx219 *imx219)
 	const struct imx219_reg_list *reg_list;
 	int ret;
 
-	ret = pm_runtime_get_sync(&client->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&client->dev);
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* Apply default values of current mode */
 	reg_list = &imx219->mode->reg_list;
-- 
2.30.2

[PATCH v2 36/79] media: i2c: imx258: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx258.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index a017ec4e0f50..90529424d5b6 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -1039,11 +1039,9 @@ static int imx258_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto err_unlock;
-		}
 
 		/*
 		 * Apply default & customized values
-- 
2.30.2

[PATCH v2 37/79] media: i2c: imx274: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx274.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c
index cdccaab3043a..ee2127436f0b 100644
--- a/drivers/media/i2c/imx274.c
+++ b/drivers/media/i2c/imx274.c
@@ -1441,9 +1441,8 @@ static int imx274_s_stream(struct v4l2_subdev *sd, int on)
 	mutex_lock(&imx274->lock);
 
 	if (on) {
-		ret = pm_runtime_get_sync(&imx274->client->dev);
+		ret = pm_runtime_resume_and_get(&imx274->client->dev);
 		if (ret < 0) {
-			pm_runtime_put_noidle(&imx274->client->dev);
 			mutex_unlock(&imx274->lock);
 			return ret;
 		}
-- 
2.30.2

[PATCH v2 38/79] media: i2c: imx290: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx290.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 6319a42057d2..06020e648a97 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -764,11 +764,9 @@ static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
 	int ret = 0;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(imx290->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(imx290->dev);
+		ret = pm_runtime_resume_and_get(imx290->dev);
+		if (ret < 0)
 			goto unlock_and_return;
-		}
 
 		ret = imx290_start_streaming(imx290);
 		if (ret) {
-- 
2.30.2

[PATCH v2 39/79] media: i2c: imx319: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx319.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
index 38540323a156..4e0a8c9d271f 100644
--- a/drivers/media/i2c/imx319.c
+++ b/drivers/media/i2c/imx319.c
@@ -2141,11 +2141,9 @@ static int imx319_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto err_unlock;
-		}
 
 		/*
 		 * Apply default & customized values
-- 
2.30.2

[PATCH v2 40/79] media: i2c: imx334: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx334.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index 047aa7658d21..a5a03bb4a6ae 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -717,9 +717,9 @@ static int imx334_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(imx334->dev);
+		ret = pm_runtime_resume_and_get(imx334->dev);
 		if (ret)
-			goto error_power_off;
+			goto error_unlock;
 
 		ret = imx334_start_streaming(imx334);
 		if (ret)
@@ -737,6 +737,7 @@ static int imx334_set_stream(struct v4l2_subdev *sd, int enable)
 
 error_power_off:
 	pm_runtime_put(imx334->dev);
+error_unlock:
 	mutex_unlock(&imx334->mutex);
 
 	return ret;
-- 
2.30.2

[PATCH v2 41/79] media: i2c: imx355: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/imx355.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
index ccedcd4c520a..93f13a04439a 100644
--- a/drivers/media/i2c/imx355.c
+++ b/drivers/media/i2c/imx355.c
@@ -1442,11 +1442,9 @@ static int imx355_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto err_unlock;
-		}
 
 		/*
 		 * Apply default & customized values
-- 
2.30.2

[PATCH v2 42/79] media: i2c: mt9m001: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/mt9m001.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c
index ac1b380e6c03..2867f64e357d 100644
--- a/drivers/media/i2c/mt9m001.c
+++ b/drivers/media/i2c/mt9m001.c
@@ -217,9 +217,9 @@ static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
 		goto done;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0)
-			goto put_unlock;
+			goto unlock;
 
 		ret = mt9m001_apply_selection(sd);
 		if (ret)
@@ -247,6 +247,7 @@ static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
 
 put_unlock:
 	pm_runtime_put(&client->dev);
+unlock:
 	mutex_unlock(&mt9m001->mutex);
 
 	return ret;
-- 
2.30.2

[PATCH v2 43/79] media: i2c: ov02a10: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov02a10.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c
index c47b1d45d8fd..a1d7314b20a9 100644
--- a/drivers/media/i2c/ov02a10.c
+++ b/drivers/media/i2c/ov02a10.c
@@ -540,11 +540,9 @@ static int ov02a10_s_stream(struct v4l2_subdev *sd, int on)
 	}
 
 	if (on) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto unlock_and_return;
-		}
 
 		ret = __ov02a10_start_stream(ov02a10);
 		if (ret) {
-- 
2.30.2

[PATCH v2 44/79] media: i2c: ov13858: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov13858.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov13858.c b/drivers/media/i2c/ov13858.c
index 4a2885ff0cbe..9598c0b19603 100644
--- a/drivers/media/i2c/ov13858.c
+++ b/drivers/media/i2c/ov13858.c
@@ -1472,11 +1472,9 @@ static int ov13858_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto err_unlock;
-		}
 
 		/*
 		 * Apply default & customized values
-- 
2.30.2

[PATCH v2 45/79] media: i2c: ov2659: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov2659.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 42f64175a6df..a3c8eae68486 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1186,11 +1186,9 @@ static int ov2659_s_stream(struct v4l2_subdev *sd, int on)
 		goto unlock;
 	}
 
-	ret = pm_runtime_get_sync(&client->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&client->dev);
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret < 0)
 		goto unlock;
-	}
 
 	ret = ov2659_init(sd, 0);
 	if (!ret)
-- 
2.30.2

[PATCH v2 46/79] media: i2c: ov2685: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov2685.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
index 49a2dcedb347..2f3836dd8eed 100644
--- a/drivers/media/i2c/ov2685.c
+++ b/drivers/media/i2c/ov2685.c
@@ -456,11 +456,10 @@ static int ov2685_s_stream(struct v4l2_subdev *sd, int on)
 		goto unlock_and_return;
 
 	if (on) {
-		ret = pm_runtime_get_sync(&ov2685->client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&ov2685->client->dev);
+		if (ret < 0)
 			goto unlock_and_return;
-		}
+
 		ret = __v4l2_ctrl_handler_setup(&ov2685->ctrl_handler);
 		if (ret) {
 			pm_runtime_put(&client->dev);
-- 
2.30.2

[PATCH v2 47/79] media: i2c: ov2740: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov2740.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 0f3f17f3c426..54779f720f9d 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -751,9 +751,8 @@ static int ov2740_set_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&ov2740->mutex);
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
 			mutex_unlock(&ov2740->mutex);
 			return ret;
 		}
@@ -1049,9 +1048,8 @@ static int ov2740_nvmem_read(void *priv, unsigned int off, void *val,
 		goto exit;
 	}
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
 		goto exit;
 	}
 
-- 
2.30.2

[PATCH v2 48/79] media: i2c: ov5647: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov5647.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 1cefa15729ce..38faa74755e3 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -882,20 +882,20 @@ static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0)
 			goto error_unlock;
 
 		ret = ov5647_stream_on(sd);
 		if (ret < 0) {
 			dev_err(&client->dev, "stream start failed: %d\n", ret);
-			goto error_unlock;
+			goto error_pm;
 		}
 	} else {
 		ret = ov5647_stream_off(sd);
 		if (ret < 0) {
 			dev_err(&client->dev, "stream stop failed: %d\n", ret);
-			goto error_unlock;
+			goto error_pm;
 		}
 		pm_runtime_put(&client->dev);
 	}
@@ -905,8 +905,9 @@ static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
 
 	return 0;
 
+error_pm:
+	pm_runtime_put(&client->dev);
 error_unlock:
-	pm_runtime_put(&client->dev);
 	mutex_unlock(&sensor->lock);
 
 	return ret;
-- 
2.30.2

[PATCH v2 49/79] media: i2c: ov5648: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov5648.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5648.c b/drivers/media/i2c/ov5648.c
index 3ecb4a3e8773..07e64ff0be3f 100644
--- a/drivers/media/i2c/ov5648.c
+++ b/drivers/media/i2c/ov5648.c
@@ -2132,11 +2132,9 @@ static int ov5648_s_stream(struct v4l2_subdev *subdev, int enable)
 	int ret;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(sensor->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(sensor->dev);
+		ret = pm_runtime_resume_and_get(sensor->dev);
+		if (ret < 0)
 			return ret;
-		}
 	}
 
 	mutex_lock(&sensor->mutex);
-- 
2.30.2

[PATCH v2 50/79] media: i2c: ov5670: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov5670.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c
index dee7df8dd100..182f271f118f 100644
--- a/drivers/media/i2c/ov5670.c
+++ b/drivers/media/i2c/ov5670.c
@@ -2347,11 +2347,9 @@ static int ov5670_set_stream(struct v4l2_subdev *sd, int enable)
 		goto unlock_and_return;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto unlock_and_return;
-		}
 
 		ret = ov5670_start_streaming(ov5670);
 		if (ret)
-- 
2.30.2

[PATCH v2 51/79] media: i2c: ov5675: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov5675.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov5675.c b/drivers/media/i2c/ov5675.c
index dea32859459a..e7e297a23960 100644
--- a/drivers/media/i2c/ov5675.c
+++ b/drivers/media/i2c/ov5675.c
@@ -863,9 +863,8 @@ static int ov5675_set_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&ov5675->mutex);
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
 			mutex_unlock(&ov5675->mutex);
 			return ret;
 		}
-- 
2.30.2

[PATCH v2 52/79] media: i2c: ov5695: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov5695.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
index 09bee57a241d..469d941813c6 100644
--- a/drivers/media/i2c/ov5695.c
+++ b/drivers/media/i2c/ov5695.c
@@ -946,11 +946,9 @@ static int ov5695_s_stream(struct v4l2_subdev *sd, int on)
 		goto unlock_and_return;
 
 	if (on) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto unlock_and_return;
-		}
 
 		ret = __ov5695_start_stream(ov5695);
 		if (ret) {
-- 
2.30.2

[PATCH v2 53/79] media: i2c: ov7740: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov7740.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index ed6904b2e8f5..74219f67f245 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -624,11 +624,9 @@ static int ov7740_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0)
 			goto err_unlock;
-		}
 
 		ret = ov7740_start_streaming(ov7740);
 		if (ret)
-- 
2.30.2

[PATCH v2 54/79] media: i2c: ov8856: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov8856.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index e3af3ea277af..2875f8e4ddcb 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -1340,9 +1340,8 @@ static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&ov8856->mutex);
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
 			mutex_unlock(&ov8856->mutex);
 			return ret;
 		}
-- 
2.30.2

[PATCH v2 55/79] media: i2c: ov8865: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov8865.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
index 9ecf180635ee..3bf6ee4898a9 100644
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -2497,11 +2497,9 @@ static int ov8865_s_stream(struct v4l2_subdev *subdev, int enable)
 	int ret;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(sensor->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(sensor->dev);
+		ret = pm_runtime_resume_and_get(sensor->dev);
+		if (ret < 0)
 			return ret;
-		}
 	}
 
 	mutex_lock(&sensor->mutex);
-- 
2.30.2

[PATCH v2 56/79] media: i2c: ov9734: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/ov9734.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov9734.c b/drivers/media/i2c/ov9734.c
index b7309a551cae..ba156683c533 100644
--- a/drivers/media/i2c/ov9734.c
+++ b/drivers/media/i2c/ov9734.c
@@ -644,9 +644,8 @@ static int ov9734_set_stream(struct v4l2_subdev *sd, int enable)
 	}
 
 	if (enable) {
-		ret = pm_runtime_get_sync(&client->dev);
+		ret = pm_runtime_resume_and_get(&client->dev);
 		if (ret < 0) {
-			pm_runtime_put_noidle(&client->dev);
 			mutex_unlock(&ov9734->mutex);
 			return ret;
 		}
-- 
2.30.2

[PATCH v2 57/79] media: i2c: tvp5150: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/tvp5150.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index e26e3f544054..374a9da75e4d 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -1448,11 +1448,9 @@ static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 	       TVP5150_MISC_CTL_CLOCK_OE;
 
 	if (enable) {
-		ret = pm_runtime_get_sync(sd->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(sd->dev);
+		ret = pm_runtime_resume_and_get(sd->dev);
+		if (ret < 0)
 			return ret;
-		}
 
 		tvp5150_enable(sd);
 
@@ -1675,15 +1673,7 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
 
 static int tvp5150_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 {
-	int ret;
-
-	ret = pm_runtime_get_sync(sd->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(sd->dev);
-		return ret;
-	}
-
-	return 0;
+	return pm_runtime_resume_and_get(sd->dev);
 }
 
 static int tvp5150_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-- 
2.30.2

[PATCH v2 58/79] media: i2c: video-i2c: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/i2c/video-i2c.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/video-i2c.c b/drivers/media/i2c/video-i2c.c
index c9a774f4c8d2..910a139c5e14 100644
--- a/drivers/media/i2c/video-i2c.c
+++ b/drivers/media/i2c/video-i2c.c
@@ -286,11 +286,9 @@ static int amg88xx_read(struct device *dev, enum hwmon_sensor_types type,
 	__le16 buf;
 	int tmp;
 
-	tmp = pm_runtime_get_sync(regmap_get_device(data->regmap));
-	if (tmp < 0) {
-		pm_runtime_put_noidle(regmap_get_device(data->regmap));
+	tmp = pm_runtime_resume_and_get(regmap_get_device(data->regmap));
+	if (tmp < 0)
 		return tmp;
-	}
 
 	tmp = regmap_bulk_read(data->regmap, AMG88XX_REG_TTHL, &buf, 2);
 	pm_runtime_mark_last_busy(regmap_get_device(data->regmap));
@@ -512,11 +510,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (data->kthread_vid_cap)
 		return 0;
 
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
 		goto error_del_list;
-	}
 
 	ret = data->chip->setup(data);
 	if (ret)
-- 
2.30.2

[PATCH v2 59/79] media: sti/hva: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

While the hva driver does it right, there are lots of errors
on other drivers due to its misusage. So, let's change
this driver to also use pm_runtime_resume_and_get(), as we're
doing similar changes all over the media subsystem.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index f59811e27f51..77b8bfa5e0c5 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -270,9 +270,8 @@ static unsigned long int hva_hw_get_ip_version(struct hva_dev *hva)
 	struct device *dev = hva_to_dev(hva);
 	unsigned long int version;
 
-	if (pm_runtime_get_sync(dev) < 0) {
+	if (pm_runtime_resume_and_get(dev) < 0) {
 		dev_err(dev, "%s     failed to get pm_runtime\n", HVA_PREFIX);
-		pm_runtime_put_noidle(dev);
 		mutex_unlock(&hva->protect_mutex);
 		return -EFAULT;
 	}
@@ -386,10 +385,10 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
 	pm_runtime_set_suspended(dev);
 	pm_runtime_enable(dev);
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
 		dev_err(dev, "%s     failed to set PM\n", HVA_PREFIX);
-		goto err_pm;
+		goto err_clk;
 	}
 
 	/* check IP hardware version */
@@ -462,6 +461,7 @@ int hva_hw_execute_task(struct hva_ctx *ctx, enum hva_hw_cmd_type cmd,
 	u8 client_id = ctx->id;
 	int ret;
 	u32 reg = 0;
+	bool got_pm = false;
 
 	mutex_lock(&hva->protect_mutex);
 
@@ -469,12 +469,13 @@ int hva_hw_execute_task(struct hva_ctx *ctx, enum hva_hw_cmd_type cmd,
 	enable_irq(hva->irq_its);
 	enable_irq(hva->irq_err);
 
-	if (pm_runtime_get_sync(dev) < 0) {
+	if (pm_runtime_resume_and_get(dev) < 0) {
 		dev_err(dev, "%s     failed to get pm_runtime\n", ctx->name);
 		ctx->sys_errors++;
 		ret = -EFAULT;
 		goto out;
 	}
+	got_pm = true;
 
 	reg = readl_relaxed(hva->regs + HVA_HIF_REG_CLK_GATING);
 	switch (cmd) {
@@ -537,7 +538,8 @@ int hva_hw_execute_task(struct hva_ctx *ctx, enum hva_hw_cmd_type cmd,
 		dev_dbg(dev, "%s     unknown command 0x%x\n", ctx->name, cmd);
 	}
 
-	pm_runtime_put_autosuspend(dev);
+	if (got_pm)
+		pm_runtime_put_autosuspend(dev);
 	mutex_unlock(&hva->protect_mutex);
 
 	return ret;
@@ -553,9 +555,8 @@ void hva_hw_dump_regs(struct hva_dev *hva, struct seq_file *s)
 
 	mutex_lock(&hva->protect_mutex);
 
-	if (pm_runtime_get_sync(dev) < 0) {
+	if (pm_runtime_resume_and_get(dev) < 0) {
 		seq_puts(s, "Cannot wake up IP\n");
-		pm_runtime_put_noidle(dev);
 		mutex_unlock(&hva->protect_mutex);
 		return;
 	}
-- 
2.30.2

[PATCH v2 60/79] media: ipu3: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
index fecef85bd62e..ca8040d1a725 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -975,10 +975,9 @@ static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
 	cio2->cur_queue = q;
 	atomic_set(&q->frame_sequence, 0);
 
-	r = pm_runtime_get_sync(&cio2->pci_dev->dev);
+	r = pm_runtime_resume_and_get(&cio2->pci_dev->dev);
 	if (r < 0) {
 		dev_info(&cio2->pci_dev->dev, "failed to set power %d\n", r);
-		pm_runtime_put_noidle(&cio2->pci_dev->dev);
 		return r;
 	}
 
-- 
2.30.2

[PATCH v2 61/79] media: coda: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/coda/coda-common.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index bd666c858fa1..13ff05e7d850 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -2660,10 +2660,10 @@ static int coda_open(struct file *file)
 	ctx->use_vdoa = false;
 
 	/* Power up and upload firmware if necessary */
-	ret = pm_runtime_get_sync(dev->dev);
+	ret = pm_runtime_resume_and_get(dev->dev);
 	if (ret < 0) {
 		v4l2_err(&dev->v4l2_dev, "failed to power up: %d\n", ret);
-		goto err_pm_get;
+		goto err_fh_del;
 	}
 
 	ret = clk_prepare_enable(dev->clk_per);
@@ -2709,6 +2709,7 @@ static int coda_open(struct file *file)
 	clk_disable_unprepare(dev->clk_per);
 err_pm_get:
 	pm_runtime_put_sync(dev->dev);
+err_fh_del:
 	v4l2_fh_del(&ctx->fh);
 	v4l2_fh_exit(&ctx->fh);
 err_coda_name_init:
-- 
2.30.2

[PATCH v2 62/79] media: exynos4-is: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-capture.c   | 6 ++----
 drivers/media/platform/exynos4-is/fimc-is.c        | 4 ++--
 drivers/media/platform/exynos4-is/fimc-isp-video.c | 3 +--
 drivers/media/platform/exynos4-is/fimc-isp.c       | 7 +++----
 drivers/media/platform/exynos4-is/fimc-lite.c      | 5 +++--
 drivers/media/platform/exynos4-is/fimc-m2m.c       | 2 +-
 drivers/media/platform/exynos4-is/media-dev.c      | 8 +++-----
 drivers/media/platform/exynos4-is/mipi-csis.c      | 8 +++-----
 8 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 13c838d3f947..0da36443173c 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
 		goto unlock;
 
 	set_bit(ST_CAPT_BUSY, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
+	if (ret < 0)
 		goto unlock;
-	}
 
 	ret = v4l2_fh_open(file);
 	if (ret) {
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 972d9601d236..1b24f5bfc4af 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
 			goto err_irq;
 	}
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_irq;
 
 	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index 612b9872afc8..8d9dc597deaa 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
 	if (ret < 0)
 		goto unlock;
 
-	ret = pm_runtime_get_sync(&isp->pdev->dev);
+	ret = pm_runtime_resume_and_get(&isp->pdev->dev);
 	if (ret < 0)
 		goto rel_fh;
 
@@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
 	if (!ret)
 		goto unlock;
 rel_fh:
-	pm_runtime_put_noidle(&isp->pdev->dev);
 	v4l2_fh_release(file);
 unlock:
 	mutex_unlock(&isp->video_lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index a77c49b18511..74b49d30901e 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 	pr_debug("on: %d\n", on);
 
 	if (on) {
-		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put(&is->pdev->dev);
+		ret = pm_runtime_resume_and_get(&is->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index fe20af3a7178..4d8b18078ff3 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
 	}
 
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_in_use;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
@@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
 	v4l2_fh_release(file);
 err_pm:
 	pm_runtime_put_sync(&fimc->pdev->dev);
+err_in_use:
 	clear_bit(ST_FLITE_IN_USE, &fimc->state);
 unlock:
 	mutex_unlock(&fimc->lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
index c9704a147e5c..7c1eb05c508f 100644
--- a/drivers/media/platform/exynos4-is/fimc-m2m.c
+++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
@@ -75,7 +75,7 @@ static int start_streaming(struct vb2_queue *q, unsigned int count)
 	struct fimc_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
 	return ret > 0 ? 0 : ret;
 }
 
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 13d192ba4aa6..9346d44a06c2 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -512,11 +512,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 	if (!fmd->pmf)
 		return -ENXIO;
 
-	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0) {
-		pm_runtime_put(fmd->pmf);
+	ret = pm_runtime_resume_and_get(fmd->pmf);
+	if (ret < 0)
 		return ret;
-	}
 
 	fmd->num_sensors = 0;
 
@@ -1291,7 +1289,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
 	if (camclk->fmd->pmf == NULL)
 		return -ENODEV;
 
-	ret = pm_runtime_get_sync(camclk->fmd->pmf);
+	ret = pm_runtime_resume_and_get(camclk->fmd->pmf);
 	return ret < 0 ? ret : 0;
 }
 
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 1aac167abb17..2a6afb78a049 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
 	struct device *dev = &state->pdev->dev;
 
 	if (on)
-		return pm_runtime_get_sync(dev);
+		return pm_runtime_resume_and_get(dev);
 
 	return pm_runtime_put_sync(dev);
 }
@@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 
 	if (enable) {
 		s5pcsis_clear_counters(state);
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret && ret != 1)
 			return ret;
-		}
 	}
 
 	mutex_lock(&state->lock);
-- 
2.30.2

[PATCH v2 63/79] media: exynos-gsc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-m2m.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 27a3c92c73bc..09551e96ac15 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -58,7 +58,7 @@ static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct gsc_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->gsc_dev->pdev->dev);
 	return ret > 0 ? 0 : ret;
 }
 
-- 
2.30.2

[PATCH v2 64/79] media: mtk-jpeg: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index 88a23bce569d..a89c7b206eef 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -920,7 +920,7 @@ static void mtk_jpeg_enc_device_run(void *priv)
 	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto enc_end;
 
@@ -973,7 +973,7 @@ static void mtk_jpeg_dec_device_run(void *priv)
 		return;
 	}
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto dec_end;
 
-- 
2.30.2

[PATCH v2 65/79] media: camss: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/qcom/camss/camss-csid.c   | 6 ++----
 drivers/media/platform/qcom/camss/camss-csiphy.c | 6 ++----
 drivers/media/platform/qcom/camss/camss-ispif.c  | 6 ++----
 drivers/media/platform/qcom/camss/camss-vfe.c    | 5 +++--
 4 files changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index cc11fbfdae13..d2a7f2a64f26 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -156,11 +156,9 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
 	int ret;
 
 	if (on) {
-		ret = pm_runtime_get_sync(dev);
-		if (ret < 0) {
-			pm_runtime_put_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
+		if (ret < 0)
 			return ret;
-		}
 
 		ret = regulator_enable(csid->vdda);
 		if (ret < 0) {
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index b3c3bf19e522..8e18b8e668cf 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -197,11 +197,9 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on)
 	if (on) {
 		int ret;
 
-		ret = pm_runtime_get_sync(dev);
-		if (ret < 0) {
-			pm_runtime_put_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
+		if (ret < 0)
 			return ret;
-		}
 
 		ret = csiphy_set_clock_rates(csiphy);
 		if (ret < 0) {
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index 37611c8861da..d9907742ba79 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -372,11 +372,9 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
 			goto exit;
 		}
 
-		ret = pm_runtime_get_sync(dev);
-		if (ret < 0) {
-			pm_runtime_put_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
+		if (ret < 0)
 			goto exit;
-		}
 
 		ret = camss_enable_clocks(ispif->nclocks, ispif->clock, dev);
 		if (ret < 0) {
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 15695fd466c4..cf743e61f798 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -584,9 +584,9 @@ static int vfe_get(struct vfe_device *vfe)
 		if (ret < 0)
 			goto error_pm_domain;
 
-		ret = pm_runtime_get_sync(vfe->camss->dev);
+		ret = pm_runtime_resume_and_get(vfe->camss->dev);
 		if (ret < 0)
-			goto error_pm_runtime_get;
+			goto error_domain_off;
 
 		ret = vfe_set_clock_rates(vfe);
 		if (ret < 0)
@@ -620,6 +620,7 @@ static int vfe_get(struct vfe_device *vfe)
 
 error_pm_runtime_get:
 	pm_runtime_put_sync(vfe->camss->dev);
+error_domain_off:
 	vfe->ops->pm_domain_off(vfe);
 
 error_pm_domain:
-- 
2.30.2

[PATCH v2 66/79] media: venus: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/qcom/venus/core.c      | 30 +++++++++----------
 .../media/platform/qcom/venus/pm_helpers.c    | 10 +++----
 2 files changed, 18 insertions(+), 22 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index fe63b9ab5b20..52760f045e1c 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -84,11 +84,9 @@ static void venus_sys_error_handler(struct work_struct *work)
 			container_of(work, struct venus_core, work.work);
 	int ret = 0;
 
-	ret = pm_runtime_get_sync(core->dev);
-	if (WARN_ON(ret < 0)) {
-		pm_runtime_put_noidle(core->dev);
+	ret = pm_runtime_resume_and_get(core->dev);
+	if (WARN_ON(ret < 0))
 		return ret;
-	}
 
 	hfi_core_deinit(core, true);
 
@@ -110,11 +108,9 @@ static void venus_sys_error_handler(struct work_struct *work)
 
 	hfi_reinit(core);
 
-	ret = pm_runtime_get_sync(core->dev);
-	if (WARN_ON(ret < 0)) {
-		pm_runtime_put_noidle(core->dev);
+	ret = pm_runtime_resume_and_get(core->dev);
+	if (WARN_ON(ret < 0))
 		return ret;
-	}
 
 	ret = venus_boot(core);
 	ret |= hfi_core_resume(core, true);
@@ -313,21 +309,21 @@ static int venus_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		goto err_runtime_disable;
 
 	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
 	if (ret)
-		goto err_runtime_disable;
+		goto err_pm;
 
 	ret = venus_firmware_init(core);
 	if (ret)
-		goto err_runtime_disable;
+		goto err_pm;
 
 	ret = venus_boot(core);
 	if (ret)
-		goto err_runtime_disable;
+		goto err_pm;
 
 	ret = hfi_core_resume(core, true);
 	if (ret)
@@ -359,8 +355,9 @@ static int venus_probe(struct platform_device *pdev)
 	v4l2_device_unregister(&core->v4l2_dev);
 err_venus_shutdown:
 	venus_shutdown(core);
-err_runtime_disable:
+err_pm:
 	pm_runtime_put_noidle(dev);
+err_runtime_disable:
 	pm_runtime_set_suspended(dev);
 	pm_runtime_disable(dev);
 	hfi_destroy(core);
@@ -379,7 +376,7 @@ static int venus_remove(struct platform_device *pdev)
 	struct device *dev = core->dev;
 	int ret;
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	WARN_ON(ret < 0);
 
 	ret = hfi_core_deinit(core, true);
@@ -390,7 +387,8 @@ static int venus_remove(struct platform_device *pdev)
 
 	venus_firmware_deinit(core);
 
-	pm_runtime_put_sync(dev);
+	if (ret >= 0)
+		pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
 	if (pm_ops->core_put)
@@ -411,7 +409,7 @@ static void venus_core_shutdown(struct platform_device *pdev)
 {
 	struct venus_core *core = platform_get_drvdata(pdev);
 
-	pm_runtime_get_sync(core->dev);
+	pm_runtime_resume_and_get(core->dev);
 	venus_shutdown(core);
 	venus_firmware_deinit(core);
 	pm_runtime_put_sync(core->dev);
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index c7e1ebec47ee..9e32ec866af7 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -486,7 +486,7 @@ static int poweron_coreid(struct venus_core *core, unsigned int coreid_mask)
 	int ret;
 
 	if (coreid_mask & VIDC_CORE_ID_1) {
-		ret = pm_runtime_get_sync(core->pmdomains[1]);
+		ret = pm_runtime_resume_and_get(core->pmdomains[1]);
 		if (ret < 0)
 			return ret;
 
@@ -504,7 +504,7 @@ static int poweron_coreid(struct venus_core *core, unsigned int coreid_mask)
 	}
 
 	if (coreid_mask & VIDC_CORE_ID_2) {
-		ret = pm_runtime_get_sync(core->pmdomains[2]);
+		ret = pm_runtime_resume_and_get(core->pmdomains[2]);
 		if (ret < 0)
 			return ret;
 
@@ -990,11 +990,9 @@ static int core_power_v4(struct venus_core *core, int on)
 
 	if (on == POWER_ON) {
 		if (pmctrl) {
-			ret = pm_runtime_get_sync(pmctrl);
-			if (ret < 0) {
-				pm_runtime_put_noidle(pmctrl);
+			ret = pm_runtime_resume_and_get(pmctrl);
+			if (ret < 0)
 				return ret;
-			}
 		}
 
 		ret = core_resets_reset(core);
-- 
2.30.2

[PATCH v2 67/79] media: venus: vdec: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/qcom/venus/vdec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
index ddb7cd39424e..347e533ea673 100644
--- a/drivers/media/platform/qcom/venus/vdec.c
+++ b/drivers/media/platform/qcom/venus/vdec.c
@@ -568,7 +568,7 @@ static int vdec_pm_get(struct venus_inst *inst)
 	int ret;
 
 	mutex_lock(&core->pm_lock);
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	mutex_unlock(&core->pm_lock);
 
 	return ret < 0 ? ret : 0;
@@ -601,7 +601,7 @@ static int vdec_pm_get_put(struct venus_inst *inst)
 	mutex_lock(&core->pm_lock);
 
 	if (pm_runtime_suspended(dev)) {
-		ret = pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0)
 			goto error;
 
-- 
2.30.2

[PATCH v2 68/79] media: venus: venc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/qcom/venus/venc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
index 4a7291f934b6..8dd49d4f124c 100644
--- a/drivers/media/platform/qcom/venus/venc.c
+++ b/drivers/media/platform/qcom/venus/venc.c
@@ -1205,9 +1205,9 @@ static int venc_open(struct file *file)
 
 	venus_helper_init_instance(inst);
 
-	ret = pm_runtime_get_sync(core->dev_enc);
+	ret = pm_runtime_resume_and_get(core->dev_enc);
 	if (ret < 0)
-		goto err_put_sync;
+		goto err_free;
 
 	ret = venc_ctrl_init(inst);
 	if (ret)
@@ -1252,6 +1252,7 @@ static int venc_open(struct file *file)
 	venc_ctrl_deinit(inst);
 err_put_sync:
 	pm_runtime_put_sync(core->dev_enc);
+err_free:
 	kfree(inst);
 	return ret;
 }
-- 
2.30.2

[PATCH v2 69/79] media: rcar-fcp: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rcar-fcp.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c
index 5c03318ae07b..de76af58013c 100644
--- a/drivers/media/platform/rcar-fcp.c
+++ b/drivers/media/platform/rcar-fcp.c
@@ -101,11 +101,9 @@ int rcar_fcp_enable(struct rcar_fcp_device *fcp)
 	if (!fcp)
 		return 0;
 
-	ret = pm_runtime_get_sync(fcp->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(fcp->dev);
+	ret = pm_runtime_resume_and_get(fcp->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	return 0;
 }
-- 
2.30.2

[PATCH v2 70/79] media: rkisp1: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
index 5f6c9d1623e4..3730376897d9 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
@@ -1003,9 +1003,8 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 	if (ret)
 		goto err_pipeline_stop;
 
-	ret = pm_runtime_get_sync(cap->rkisp1->dev);
+	ret = pm_runtime_resume_and_get(cap->rkisp1->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(cap->rkisp1->dev);
 		dev_err(cap->rkisp1->dev, "power up failed %d\n", ret);
 		goto err_destroy_dummy;
 	}
-- 
2.30.2

[PATCH v2 71/79] media: s3c-camif: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s3c-camif/camif-capture.c | 2 +-
 drivers/media/platform/s3c-camif/camif-core.c    | 5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/s3c-camif/camif-capture.c b/drivers/media/platform/s3c-camif/camif-capture.c
index 9ca49af29542..62241ec3b978 100644
--- a/drivers/media/platform/s3c-camif/camif-capture.c
+++ b/drivers/media/platform/s3c-camif/camif-capture.c
@@ -547,7 +547,7 @@ static int s3c_camif_open(struct file *file)
 	if (ret < 0)
 		goto unlock;
 
-	ret = pm_runtime_get_sync(camif->dev);
+	ret = pm_runtime_resume_and_get(camif->dev);
 	if (ret < 0)
 		goto err_pm;
 
diff --git a/drivers/media/platform/s3c-camif/camif-core.c b/drivers/media/platform/s3c-camif/camif-core.c
index 4c3c00d59c92..e1d51fd3e700 100644
--- a/drivers/media/platform/s3c-camif/camif-core.c
+++ b/drivers/media/platform/s3c-camif/camif-core.c
@@ -460,9 +460,9 @@ static int s3c_camif_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_disable;
 
 	ret = camif_media_dev_init(camif);
 	if (ret < 0)
@@ -502,6 +502,7 @@ static int s3c_camif_probe(struct platform_device *pdev)
 	camif_unregister_media_entities(camif);
 err_pm:
 	pm_runtime_put(dev);
+err_disable:
 	pm_runtime_disable(dev);
 	camif_clk_put(camif);
 err_clk:
-- 
2.30.2

[PATCH v2 72/79] media: s5p-mfc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 62d2320a7218..88b7d33c9197 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -78,11 +78,9 @@ int s5p_mfc_power_on(void)
 {
 	int i, ret = 0;
 
-	ret = pm_runtime_get_sync(pm->device);
-	if (ret < 0) {
-		pm_runtime_put_noidle(pm->device);
+	ret = pm_runtime_resume_and_get(pm->device);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* clock control */
 	for (i = 0; i < pm->num_clocks; i++) {
-- 
2.30.2

[PATCH v2 73/79] media: bdisp-v4l2: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
index 060ca85f64d5..85288da9d2ae 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
@@ -499,7 +499,7 @@ static int bdisp_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct bdisp_ctx *ctx = q->drv_priv;
 	struct vb2_v4l2_buffer *buf;
-	int ret = pm_runtime_get_sync(ctx->bdisp_dev->dev);
+	int ret = pm_runtime_resume_and_get(ctx->bdisp_dev->dev);
 
 	if (ret < 0) {
 		dev_err(ctx->bdisp_dev->dev, "failed to set runtime PM\n");
@@ -1364,10 +1364,10 @@ static int bdisp_probe(struct platform_device *pdev)
 
 	/* Power management */
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to set PM\n");
-		goto err_pm;
+		goto err_remove;
 	}
 
 	/* Filters */
@@ -1395,6 +1395,7 @@ static int bdisp_probe(struct platform_device *pdev)
 	bdisp_hw_free_filters(bdisp->dev);
 err_pm:
 	pm_runtime_put(dev);
+err_remove:
 	bdisp_debugfs_remove(bdisp);
 	v4l2_device_unregister(&bdisp->v4l2_dev);
 err_clk:
-- 
2.30.2

[PATCH v2 74/79] media: stm32: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index bbcc2254fa2e..5f4e1db8cfcd 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -723,11 +723,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	u32 val = 0;
 	int ret;
 
-	ret = pm_runtime_get_sync(dcmi->dev);
+	ret = pm_runtime_resume_and_get(dcmi->dev);
 	if (ret < 0) {
 		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
 			__func__, ret);
-		goto err_pm_put;
+		goto err_unlock;
 	}
 
 	ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
@@ -848,6 +848,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_pm_put:
 	pm_runtime_put(dcmi->dev);
+err_unlock:
 	spin_lock_irq(&dcmi->irqlock);
 	/*
 	 * Return all buffers to vb2 in QUEUED state.
-- 
2.30.2

[PATCH v2 75/79] media: sunxi: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
index 4785faddf630..54b909987caa 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
@@ -206,9 +206,9 @@ static int sun4i_csi_open(struct file *file)
 	if (ret)
 		return ret;
 
-	ret = pm_runtime_get_sync(csi->dev);
+	ret = pm_runtime_resume_and_get(csi->dev);
 	if (ret < 0)
-		goto err_pm_put;
+		goto err_unlock;
 
 	ret = v4l2_pipeline_pm_get(&csi->vdev.entity);
 	if (ret)
@@ -227,6 +227,8 @@ static int sun4i_csi_open(struct file *file)
 
 err_pm_put:
 	pm_runtime_put(csi->dev);
+
+err_unlock:
 	mutex_unlock(&csi->lock);
 
 	return ret;
-- 
2.30.2

[PATCH v2 76/79] media: ti-vpe: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/ti-vpe/cal-video.c | 4 +++-
 drivers/media/platform/ti-vpe/cal.c       | 8 +++++---
 drivers/media/platform/ti-vpe/vpe.c       | 4 +---
 3 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal-video.c b/drivers/media/platform/ti-vpe/cal-video.c
index 7b7436a355ee..15fb5360cf13 100644
--- a/drivers/media/platform/ti-vpe/cal-video.c
+++ b/drivers/media/platform/ti-vpe/cal-video.c
@@ -700,7 +700,9 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
 
-	pm_runtime_get_sync(ctx->cal->dev);
+	ret = pm_runtime_resume_and_get(ctx->cal->dev);
+	if (ret < 0)
+		goto error_pipeline;
 
 	cal_ctx_set_dma_addr(ctx, addr);
 	cal_ctx_start(ctx);
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 2e2bef91b2b0..76fe7a8b33f6 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -1024,7 +1024,7 @@ static int cal_probe(struct platform_device *pdev)
 
 	/* Read the revision and hardware info to verify hardware access. */
 	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret)
 		goto error_pm_runtime;
 
@@ -1098,10 +1098,11 @@ static int cal_remove(struct platform_device *pdev)
 {
 	struct cal_dev *cal = platform_get_drvdata(pdev);
 	unsigned int i;
+	int ret;
 
 	cal_dbg(1, cal, "Removing %s\n", CAL_MODULE_NAME);
 
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 
 	cal_media_unregister(cal);
 
@@ -1115,7 +1116,8 @@ static int cal_remove(struct platform_device *pdev)
 	for (i = 0; i < cal->data->num_csi2_phy; i++)
 		cal_camerarx_destroy(cal->phy[i]);
 
-	pm_runtime_put_sync(&pdev->dev);
+	if (ret >= 0)
+		pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 10251b787674..07cb2c140295 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2471,10 +2471,8 @@ static int vpe_runtime_get(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "vpe_runtime_get\n");
 
-	r = pm_runtime_get_sync(&pdev->dev);
+	r = pm_runtime_resume_and_get(&pdev->dev);
 	WARN_ON(r < 0);
-	if (r)
-		pm_runtime_put_noidle(&pdev->dev);
 	return r < 0 ? r : 0;
 }
 
-- 
2.30.2

[PATCH v2 77/79] media: vsp1: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/vsp1/vsp1_drv.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index aa66e4f5f3f3..c2bdb6629657 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -561,11 +561,9 @@ int vsp1_device_get(struct vsp1_device *vsp1)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(vsp1->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(vsp1->dev);
+	ret = pm_runtime_resume_and_get(vsp1->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	return 0;
 }
-- 
2.30.2

[PATCH v2 78/79] media: rcar-vin: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 6 ++++++
 drivers/media/platform/rcar-vin/rcar-dma.c  | 6 ++----
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 6 ++----
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index e06cd512aba2..ce8e84f9e3d9 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -408,6 +408,12 @@ static void rcsi2_enter_standby(struct rcar_csi2 *priv)
 
 static void rcsi2_exit_standby(struct rcar_csi2 *priv)
 {
+	/*
+	 * The code at rcsi2_enter_standby() assumes
+	 * inconditionally that PM runtime usage count was
+	 * incremented. So, it shouldn't use pm_runtime_resume_and_get()
+	 * here.
+	 */
 	pm_runtime_get_sync(priv->dev);
 	reset_control_deassert(priv->rstc);
 }
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index f30dafbdf61c..f5f722ab1d4e 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1458,11 +1458,9 @@ int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
 	u32 vnmc;
 	int ret;
 
-	ret = pm_runtime_get_sync(vin->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(vin->dev);
+	ret = pm_runtime_resume_and_get(vin->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* Make register writes take effect immediately. */
 	vnmc = rvin_read(vin, VNMC_REG);
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 457a65bf6b66..b1e9f86caa5c 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -870,11 +870,9 @@ static int rvin_open(struct file *file)
 	struct rvin_dev *vin = video_drvdata(file);
 	int ret;
 
-	ret = pm_runtime_get_sync(vin->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(vin->dev);
+	ret = pm_runtime_resume_and_get(vin->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	ret = mutex_lock_interruptible(&vin->lock);
 	if (ret)
-- 
2.30.2

[PATCH v2 79/79] media: hantro: document the usage of pm_runtime_get_sync()

[Mauro Carvalho Chehab]

Despite other *_get()/*_put() functions, where usage count is
incremented only if not errors, the pm_runtime_get_sync() has
a different behavior, incrementing the counter *even* on
errors.

That's an error prone behavior, as people often forget to
decrement the usage counter.

However, the hantro driver depends on this behavior, as it
will decrement the usage_count unconditionally at the m2m
job finish time, which makes sense.

So, intead of using the pm_runtime_resume_and_get() that
would decrement the counter on error, keep the current
API, but add a documentation explaining the rationale for
keep using pm_runtime_get_sync().

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/hantro/hantro_drv.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 595e82a82728..96f940c1c85c 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -155,6 +155,13 @@ static void device_run(void *priv)
 	ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks);
 	if (ret)
 		goto err_cancel_job;
+
+	/*
+	 * The pm_runtime_get_sync() will increment dev->power.usage_count,
+	 * even on errors. That's the expected behavior here, since the
+	 * hantro_job_finish() function at the error handling code
+	 * will internally call pm_runtime_put_autosuspend().
+	 */
 	ret = pm_runtime_get_sync(ctx->dev->dev);
 	if (ret < 0)
 		goto err_cancel_job;
-- 
2.30.2