From: Steve Longerbeam <slongerbeam@gmail.com>
To: Adam Ford <aford173@gmail.com>
Cc: linux-media <linux-media@vger.kernel.org>
Subject: Re: [PATCH v2 00/23] media: imx: Create media links in bound notifiers
Date: Tue, 4 Feb 2020 16:44:21 -0800 [thread overview]
Message-ID: <d853c922-db68-b124-f5de-093bdb74c0d2@gmail.com> (raw)
In-Reply-To: <CAHCN7xLdV5o6F1r1k+neud3yU7SzK=0Z3CFMcHdbB4Dce-pWUg@mail.gmail.com>
Hi Adam,
On 2/4/20 2:53 AM, Adam Ford wrote:
> On Sun, Feb 2, 2020 at 1:30 PM Steve Longerbeam <slongerbeam@gmail.com> wrote:
>> Hi Adam,
>>
>> On 12/16/19 9:20 AM, Adam Ford wrote:
>>> On Sun, Nov 24, 2019 at 1:08 PM Steve Longerbeam <slongerbeam@gmail.com> wrote:
>>>> Move media link creation into the notifier bound callbacks in the
>>>> subdevices required by imx, making use of media_entity_get_fwnode_pad().
>>>>
>>>> In the process, improve the behavior of media_entity_get_fwnode_pad().
>>>> The function is also being used inconsistently by current callers, so
>>>> that is fixed in this serieas as well.
>>>>
>>>> The default behavior of media_entity_get_fwnode_pad() fails when
>>>> the entity has multiple sink and/or source pads. Wrt imx, there are
>>>> two such entities: the imx6 csi-2 receiver, and the video mux.
>>>>
>>>> Modify the default behavior of media_entity_get_fwnode_pad() to first
>>>> determine if the port number at the provided endpoint firmware node
>>>> corresponds to a valid pad for the entity. That way the default behavior
>>>> will work for any entities that implement 1:1 mappings, without requiring
>>>> they implement the .get_fwnode_pad op.
>>>>
>>>> In other words, the old behavior of media_entity_get_fwnode_pad() required
>>>> entities implement .get_fwnode_pad if they have multiple sink or source pads.
>>>> The new behavior requires entities implement .get_fwnode_pad only if they
>>>> have multiple sink or source pads, and do not have 1:1 port:pad mappings.
>>>>
>>>> Also, as part of the above work, it was discovered that all of the
>>>> current callers of media_entity_get_fwnode_pad() are not using that
>>>> function in a consistent way. In all but one case the driver passes the
>>>> firmware node of the subdevice itself to the function, not one of it
>>>> endpoint nodes as the function expects. In more detail:
>>>>
>>>> - Cadence MIPI-CSI2 Receiver,
>>>> - ST Micro MIPID02 CSI-2,
>>>> - Allwinner V3s CSI,
>>>> - Allwinner A10 CSI,
>>>> - STM32 DCMI:
>>>> These drivers call media_entity_get_fwnode_pad() in the subdev bound
>>>> notifier callback, but passes sd->fwnode to the function. This is
>>>> usually the fwnode of the subdevice itself, not one of its endpoint
>>>> nodes. This only works now because there are no implementations of the
>>>> .get_fwnode_pad op. This will break as soon as the bound subdevice
>>>> implements the .get_fwnode_pad op.
>>>>
>>>> - Renesas R-Car MIPI CSI-2 Receiver:
>>>> Calls media_entity_get_fwnode_pad() in the subdev bound notifier
>>>> callback. In this case the driver passes the async subdev descriptor
>>>> match fwnode. Again for most subdevices, this is the fwnode of the
>>>> subdevice itself, not one of its endpoint nodes. However on the
>>>> Salvator-X platform, the bound subdevice happens to be the ADV748x
>>>> CSI-2 transmitter, which does indeed place the endpoint node in the
>>>> asd match fwnode. But the problem is that the driver is now making
>>>> assumptions about what subdevices it is binding to.
>>>>
>>>> To resolve the above issues, this series adds a new function
>>>> media_create_fwnode_pad_links(), which creates the media links from/to
>>>> all pads on a remote entity, to/from a single specific local entity pad,
>>>> using the fwnode endpoint connections between them. It's API makes it
>>>> convenient to call from subdev bound notifier callbacks.
>>>>
>>>> Another function media_create_fwnode_links() is added that will create
>>>> links from/to all pads on a remote entity, to/from all pads on a local
>>>> entity. It's API also makes it convenient to call from subdev bound
>>>> notifier callbacks, and can be called for entities that link to remote
>>>> entities via multiple pads (for example the video-mux which has multiple
>>>> sink pads that link to multiple bound subdevices).
>>>>
>>>> This series has been tested on i.MX6Q SabreSD, SabreLite, and SabreAuto
>>>> platforms, and the Renesas Salvator-X platform.
>>>>
>>>> The series needs testing on i.MX7, Cadence, ST Micro MIPID02, STM32 DCMI,
>>>> and Allwinner V3s and A10 platforms. Testing only needs to verify that the
>>>> media graph is unchanged, no stream testing is required. If the media graph
>>>> is broken, it means the subdevice(s) that bind to the drivers listed
>>>> above need to implement the .get_fwnode_pad op.
>>>>
>>>> History:
>>>>
>>>> v2:
>>>> - rename/move the notifier-to-state inlines in imx7-mipi-csis.c and
>>>> imx7-media-csi.c, suggested by Rui Silva.
>>>> - rewrite imx_media_create_links() to only add the missing media links
>>>> from the imx6 MIPI CSI-2 receiver.
>>>>
>>> I finally got around to testing the whole series on my i.MX6Q device
>>> with a ov5640 sensor.
>>>
>>> I get some error messages, and I was hoping you might have some ideas
>>> or suggestion on what might be happening.
>>>
>>>
>>> # gst-launch-1.0 -v v4l2src device=/dev/video4 ! kmssink name=imx-drm connector-
>>> id=54 sync=0
>>> Setting pipeline to PAUSED ...
>>> Pipeline is live and does not need PREROLL ...
>>> /GstPipeline:pipeline0/GstKMSSink:imx-drm: display-width = 1920
>>> /GstPipeline:pipeline0/GstKMSSink:imx-drm: display-height = 1080
>>> Setting pipeline to PLAYING ...
>>> New clock: GstSystemClock
>>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps =
>>> video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480,
>>> framerate=(fraction)30/1, colorimetry[ 260.606952] ipu2_csi0:
>>> pipeline start failed with -32
>>> =(string)bt601, interlace-mode=(string)progressive
>>> /GstPipeline:pipeline0/GstKMSSink:imx-drm.GstPad:sink: caps =
>>> video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480,
>>> framerate=(fraction)30/1, colorimetry=(string)bt601,
>>> interlace-mode=(string)progressive
>>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed
>>> to allocate required memory.
>>> Additional debug info:
>>> gstv4l2src.c(658): gst_v4l2src_decide_allocation ():
>>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
>>> Buffer pool activation failed
>>> Execution ended after 0:00:00.038167333
>>> Setting pipeline to PAUSED ...
>>> Setting pipeline to READY ...
>>> Setting pipeline to NULL ...
>>> Freeing pipeline ...
>>>
>>> I visually verified my pipeline and tried to setup the video format
>>> for each node in the pipeline:
>>>
>>> media-ctl --links "'ov5640 2-0010':0->'imx6-mipi-csi2':0[1]"
>>> media-ctl --links "'imx6-mipi-csi2':1->'ipu1_csi0_mux':0[1]"
>>> media-ctl --links "'ipu1_csi0_mux':2->'ipu1_csi0':0[1]"
>>> media-ctl --links "'ipu1_csi0':2->'ipu1_csi0 capture':0[1]"
>>>
>>> media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
>>> media-ctl --set-v4l2 "'imx6-mipi-csi2':0[fmt:UYVY2X8/640x480 field:none]"
>>> media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480 field:none]"
>>> media-ctl --set-v4l2 "'ipu1_csi0_mux':0[fmt:UYVY2X8/640x480 field:none]"
>>> media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480 field:none]"
>>> media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY2X8/640x480 field:none]"
>>> media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
>>>
>>>
>>> I don't see any missing entries in the pipeline, so I was hoping you
>>> might have some suggestions.
>> I tried the exactly equivalent pipeline on quad SabreSD and don't see
>> any issue. But from your
>>
>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed to allocate required memory.
>>
>>
>> it may be that you're platform was not able to allocate the buffer pools.
> I don't want to stand in the way. I'm sure its fine if it works with
> the SabreSD board. Maybe I did something wrong.
Can you re-test with v3 I just posted on your i.MX6Q device with the
ov5640 sensor?
TIA,
Steve
>
>>>> Steve Longerbeam (23):
>>>> media: entity: Pass entity to get_fwnode_pad operation
>>>> media: entity: Modify default behavior of media_entity_get_fwnode_pad
>>>> media: entity: Convert media_entity_get_fwnode_pad() args to const
>>>> media: Move v4l2_fwnode_parse_link from v4l2 to driver base
>>>> media: entity: Add functions to convert fwnode endpoints to media
>>>> links
>>>> media: adv748x: csi2: Implement get_fwnode_pad
>>>> media: rcar-csi2: Fix fwnode media link creation
>>>> media: cadence: csi2rx: Fix fwnode media link creation
>>>> media: sun6i: Fix fwnode media link creation
>>>> media: st-mipid02: Fix fwnode media link creation
>>>> media: stm32-dcmi: Fix fwnode media link creation
>>>> media: sunxi: Fix fwnode media link creation
>>>> media: v4l2-fwnode: Pass notifier to
>>>> v4l2_async_register_fwnode_subdev()
>>>> media: video-mux: Create media links in bound notifier
>>>> media: imx: mipi csi-2: Create media links in bound notifier
>>>> media: imx7-mipi-csis: Create media links in bound notifier
>>>> media: imx7-media-csi: Create media links in bound notifier
>>>> media: imx: csi: Implement get_fwnode_pad
>>>> media: imx: csi: Embed notifier in struct csi_priv
>>>> media: imx: csi: Create media links in bound notifier
>>>> media: imx: csi: Lookup upstream endpoint with
>>>> imx_media_get_pad_fwnode
>>>> media: imx: Create missing links from CSI-2 receiver
>>>> media: imx: TODO: Remove media link creation todos
>>>>
>>>> drivers/base/property.c | 63 ++++++
>>>> drivers/media/i2c/adv748x/adv748x-csi2.c | 21 ++
>>>> drivers/media/i2c/st-mipid02.c | 20 +-
>>>> drivers/media/mc/mc-entity.c | 209 +++++++++++++++++-
>>>> drivers/media/platform/cadence/cdns-csi2rx.c | 27 +--
>>>> drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
>>>> drivers/media/platform/stm32/stm32-dcmi.c | 15 +-
>>>> .../platform/sunxi/sun4i-csi/sun4i_csi.c | 27 +--
>>>> .../platform/sunxi/sun4i-csi/sun4i_csi.h | 1 -
>>>> .../platform/sunxi/sun6i-csi/sun6i_csi.c | 36 +--
>>>> drivers/media/platform/video-mux.c | 30 ++-
>>>> drivers/media/platform/xilinx/xilinx-vipp.c | 69 +++---
>>>> drivers/media/v4l2-core/v4l2-fwnode.c | 50 +----
>>>> drivers/staging/media/imx/TODO | 29 ---
>>>> drivers/staging/media/imx/imx-media-csi.c | 92 +++++---
>>>> .../staging/media/imx/imx-media-dev-common.c | 60 ++---
>>>> drivers/staging/media/imx/imx-media-of.c | 114 ----------
>>>> drivers/staging/media/imx/imx-media-utils.c | 33 +++
>>>> drivers/staging/media/imx/imx-media.h | 5 +-
>>>> drivers/staging/media/imx/imx6-mipi-csi2.c | 29 ++-
>>>> drivers/staging/media/imx/imx7-media-csi.c | 55 +++--
>>>> drivers/staging/media/imx/imx7-mipi-csis.c | 30 ++-
>>>> include/linux/fwnode.h | 14 ++
>>>> include/linux/property.h | 5 +
>>>> include/media/media-entity.h | 99 ++++++++-
>>>> include/media/v4l2-fwnode.h | 56 +----
>>>> 26 files changed, 735 insertions(+), 477 deletions(-)
>>>>
>>>> --
>>>> 2.17.1
>>>>
prev parent reply other threads:[~2020-02-05 0:44 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-24 19:06 [PATCH v2 00/23] media: imx: Create media links in bound notifiers Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 01/23] media: entity: Pass entity to get_fwnode_pad operation Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 02/23] media: entity: Modify default behavior of media_entity_get_fwnode_pad Steve Longerbeam
2019-11-28 12:04 ` Jacopo Mondi
2019-12-14 21:29 ` Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 03/23] media: entity: Convert media_entity_get_fwnode_pad() args to const Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 04/23] media: Move v4l2_fwnode_parse_link from v4l2 to driver base Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 05/23] media: entity: Add functions to convert fwnode endpoints to media links Steve Longerbeam
2019-11-28 13:46 ` Jacopo Mondi
2019-12-14 21:31 ` Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 06/23] media: adv748x: csi2: Implement get_fwnode_pad Steve Longerbeam
2019-11-28 11:53 ` Jacopo Mondi
2019-12-14 20:43 ` Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 07/23] media: rcar-csi2: Fix fwnode media link creation Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 08/23] media: cadence: csi2rx: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 09/23] media: sun6i: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 10/23] media: st-mipid02: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 11/23] media: stm32-dcmi: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 12/23] media: sunxi: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 13/23] media: v4l2-fwnode: Pass notifier to v4l2_async_register_fwnode_subdev() Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 14/23] media: video-mux: Create media links in bound notifier Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 15/23] media: imx: mipi csi-2: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 16/23] media: imx7-mipi-csis: " Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 17/23] media: imx7-media-csi: " Steve Longerbeam
2019-11-26 22:49 ` Rui Miguel Silva
2019-11-24 19:06 ` [PATCH v2 18/23] media: imx: csi: Implement get_fwnode_pad Steve Longerbeam
2019-11-24 19:06 ` [PATCH v2 19/23] media: imx: csi: Embed notifier in struct csi_priv Steve Longerbeam
2019-11-24 19:07 ` [PATCH v2 20/23] media: imx: csi: Create media links in bound notifier Steve Longerbeam
2019-11-24 19:07 ` [PATCH v2 21/23] media: imx: csi: Lookup upstream endpoint with imx_media_get_pad_fwnode Steve Longerbeam
2019-11-24 19:07 ` [PATCH v2 22/23] media: imx: Create missing links from CSI-2 receiver Steve Longerbeam
2019-11-24 19:07 ` [PATCH v2 23/23] media: imx: TODO: Remove media link creation todos Steve Longerbeam
2019-11-27 2:10 ` [PATCH v2 00/23] media: imx: Create media links in bound notifiers Adam Ford
2019-11-27 2:23 ` Steve Longerbeam
2019-11-27 2:31 ` Adam Ford
2019-12-16 17:20 ` Adam Ford
2020-02-02 19:30 ` Steve Longerbeam
2020-02-04 10:53 ` Adam Ford
2020-02-05 0:44 ` Steve Longerbeam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d853c922-db68-b124-f5de-093bdb74c0d2@gmail.com \
--to=slongerbeam@gmail.com \
--cc=aford173@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).