From: Oleh Kravchenko <oleg@kaa.org.ua>
To: linux-media <linux-media@vger.kernel.org>
Subject: Re: [PATCH] [media] cx231xx: Initial support for Evromedia USB Full Hybrid Full HD
Date: Tue, 3 Jan 2017 00:04:24 +0200 [thread overview]
Message-ID: <ec40fa1a-e84b-4a82-f8c2-28719ac29bb8@kaa.org.ua> (raw)
In-Reply-To: <20170101172823.7654-1-oleg@kaa.org.ua>
Tested with Kaffeine https://kaffeine.kde.org/
dmesg output:
usb 3-4: new high-speed USB device number 3 using ehci-pci
usb 3-4: New USB device found, idVendor=1b80, idProduct=d3b2
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: Polaris AV Capture
usb 3-4: Manufacturer: Conexant Corporation
usb 3-4: SerialNumber: 0000000000
cx231xx 3-4:1.1: New device Conexant Corporation Polaris AV Capture @
480 Mbps (1b80:d3b2) with 7 interfaces
cx231xx 3-4:1.1: Identified as Evromedia USB Full Hybrid Full HD (card=23)
i2c i2c-6: Added multiplexed i2c bus 8
i2c i2c-6: Added multiplexed i2c bus 9
cx231xx 3-4:1.1: v4l2 driver version 0.0.3
cx231xx 3-4:1.1: Unknown tuner type configuring SIF
cx231xx 3-4:1.1: Registered video device video1 [v4l2]
cx231xx 3-4:1.1: Registered VBI device vbi0
cx231xx 3-4:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
i2c i2c-9: Added multiplexed i2c bus 10
si2168 9-0064: Silicon Labs Si2168-A30 successfully identified
si2168 9-0064: firmware version: A 3.0.2
si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
DVB: registering new adapter (cx231xx #0)
cx231xx 3-4:1.1: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
cx231xx 3-4:1.1: Successfully loaded cx231xx-dvb
cx231xx 3-4:1.1: video EndPoint Addr 0x84, Alternate settings: 5
cx231xx 3-4:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
cx231xx 3-4:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
cx231xx 3-4:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30-01.fw'
si2168 9-0064: firmware version: A 3.0.19
si2157 7-0060: found a 'Silicon Labs Si2158-A20'
si2157 7-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
si2157 7-0060: firmware version: 2.1.9
Tested-by: Oleh Kravchenko <oleg@kaa.org.ua>
On 01.01.17 19:28, Oleh Kravchenko wrote:
> Add initial support for the Evromedia USB Full Hybrid Full HD
> with USB ID 1b80:d3b2.
>
> Status:
> - DVB-T2 works fine;
> - Analog not implemented.
>
> Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
> ---
> drivers/media/usb/cx231xx/Kconfig | 1 +
> drivers/media/usb/cx231xx/cx231xx-cards.c | 16 +++++++
> drivers/media/usb/cx231xx/cx231xx-dvb.c | 74 +++++++++++++++++++++++++++++++
> drivers/media/usb/cx231xx/cx231xx-i2c.c | 37 ++++++++++++++++
> drivers/media/usb/cx231xx/cx231xx.h | 1 +
> 5 files changed, 129 insertions(+)
>
> diff --git a/drivers/media/usb/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig
> index 0cced3e..58de80b 100644
> --- a/drivers/media/usb/cx231xx/Kconfig
> +++ b/drivers/media/usb/cx231xx/Kconfig
> @@ -50,6 +50,7 @@ config VIDEO_CX231XX_DVB
> select DVB_LGDT3306A if MEDIA_SUBDRV_AUTOSELECT
> select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
> select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
> + select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
>
> ---help---
> diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
> index 36bc254..380aff7 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-cards.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
> @@ -841,6 +841,20 @@ struct cx231xx_board cx231xx_boards[] = {
> .gpio = NULL,
> } },
> },
> + [CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD] = {
> + .name = "Evromedia USB Full Hybrid Full HD",
> + .tuner_type = TUNER_ABSENT,
> + .has_dvb = 1,
> + .demod_i2c_master = I2C_1_MUX_3,
> + .demod_addr = 0xc8 >> 1,
> + .tuner_i2c_master = I2C_2,
> + .tuner_addr = 0xc0 >> 1,
> + .input = {{
> + .type = CX231XX_VMUX_TELEVISION,
> + .vmux = 0,
> + .amux = CX231XX_AMUX_VIDEO,
> + } },
> + },
> };
> const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
>
> @@ -908,6 +922,8 @@ struct usb_device_id cx231xx_id_table[] = {
> .driver_info = CX231XX_BOARD_OTG102},
> {USB_DEVICE(USB_VID_TERRATEC, 0x00a6),
> .driver_info = CX231XX_BOARD_TERRATEC_GRABBY},
> + {USB_DEVICE(0x1b80, 0xd3b2),
> + .driver_info = CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD},
> {},
> };
>
> diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
> index 1417515..131c1e2 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
> @@ -33,6 +33,7 @@
> #include "s5h1411.h"
> #include "lgdt3305.h"
> #include "si2165.h"
> +#include "si2168.h"
> #include "mb86a20s.h"
> #include "si2157.h"
> #include "lgdt3306a.h"
> @@ -949,6 +950,79 @@ static int dvb_init(struct cx231xx *dev)
> &pv_tda18271_config);
> break;
>
> + case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
> + {
> + struct si2157_config si2157_config;
> + struct si2168_config si2168_config;
> + struct i2c_board_info info;
> + struct i2c_client *client;
> + struct i2c_adapter *adapter;
> +
> + /* attach demodulator chip */
> + memset(&si2168_config, 0, sizeof(si2168_config));
> + si2168_config.ts_mode = SI2168_TS_SERIAL; /* from *.inf file */
> + si2168_config.fe = &dev->dvb->frontend;
> + si2168_config.i2c_adapter = &adapter;
> + si2168_config.ts_clock_inv = true;
> +
> + memset(&info, 0, sizeof(info));
> + strlcpy(info.type, "si2168", I2C_NAME_SIZE);
> + info.addr = dev->board.demod_addr;
> + info.platform_data = &si2168_config;
> +
> + request_module(info.type);
> + client = i2c_new_device(demod_i2c, &info);
> +
> + if (client == NULL || client->dev.driver == NULL || dev->dvb->frontend == NULL) {
> + dev_err(dev->dev, "Failed to attach Si2168 front end\n");
> + result = -EINVAL;
> + goto out_free;
> + }
> +
> + if (!try_module_get(client->dev.driver->owner)) {
> + i2c_unregister_device(client);
> + result = -ENODEV;
> + goto out_free;
> + }
> +
> + dvb->i2c_client_demod = client;
> + dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
> + dvb->frontend->callback = cx231xx_tuner_callback;
> +
> + /* attach tuner chip */
> + memset(&si2157_config, 0, sizeof(si2157_config));
> + si2157_config.fe = dev->dvb->frontend;
> +#ifdef CONFIG_MEDIA_CONTROLLER_DVB
> + si2157_config.mdev = dev->media_dev;
> +#endif
> + si2157_config.if_port = 1;
> + si2157_config.inversion = false;
> +
> + memset(&info, 0, sizeof(info));
> + strlcpy(info.type, "si2157", I2C_NAME_SIZE);
> + info.addr = dev->board.tuner_addr;
> + info.platform_data = &si2157_config;
> +
> + request_module("si2157");
> + client = i2c_new_device(tuner_i2c, &info);
> +
> + if (client == NULL || client->dev.driver == NULL) {
> + dvb_frontend_detach(dev->dvb->frontend);
> + result = -ENODEV;
> + goto out_free;
> + }
> +
> + if (!try_module_get(client->dev.driver->owner)) {
> + i2c_unregister_device(client);
> + dvb_frontend_detach(dev->dvb->frontend);
> + result = -ENODEV;
> + goto out_free;
> + }
> +
> + dev->cx231xx_reset_analog_tuner = NULL;
> + dev->dvb->i2c_client_tuner = client;
> + break;
> + }
> default:
> dev_err(dev->dev,
> "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
> diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
> index 35e9acf..6860c91 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
> @@ -171,6 +171,43 @@ static int cx231xx_i2c_send_bytes(struct i2c_adapter *i2c_adap,
> bus->i2c_nostop = 0;
> bus->i2c_reserve = 0;
>
> + } else if (dev->model == CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD
> + && msg->addr == dev->tuner_addr
> + && msg->len > 4) {
> + /* special case for Evromedia USB Full Hybrid Full HD tuner chip */
> + size = msg->len;
> + saddr_len = 1;
> +
> + /* adjust the length to correct length */
> + size -= saddr_len;
> +
> + buf_ptr = (u8*)(msg->buf + 1);
> +
> + do {
> + /* prepare xfer_data struct */
> + req_data.dev_addr = msg->addr;
> + req_data.direction = msg->flags;
> + req_data.saddr_len = saddr_len;
> + req_data.saddr_dat = msg->buf[0];
> + req_data.buf_size = size > 4 ? 4 : size;
> + req_data.p_buffer = (u8*)(buf_ptr + loop * 4);
> +
> + bus->i2c_nostop = (size > 4) ? 1 : 0;
> + bus->i2c_reserve = (loop == 0) ? 0 : 1;
> +
> + /* usb send command */
> + status = dev->cx231xx_send_usb_command(bus, &req_data);
> + ++ loop;
> +
> + if (size >= 4) {
> + size -= 4;
> + } else {
> + size = 0;
> + }
> + } while (size > 0);
> +
> + bus->i2c_nostop = 0;
> + bus->i2c_reserve = 0;
> } else { /* regular case */
>
> /* prepare xfer_data struct */
> diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
> index 90c8676..d9792ea 100644
> --- a/drivers/media/usb/cx231xx/cx231xx.h
> +++ b/drivers/media/usb/cx231xx/cx231xx.h
> @@ -78,6 +78,7 @@
> #define CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx 20
> #define CX231XX_BOARD_HAUPPAUGE_955Q 21
> #define CX231XX_BOARD_TERRATEC_GRABBY 22
> +#define CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD 23
>
> /* Limits minimum and default number of buffers */
> #define CX231XX_MIN_BUF 4
>
next prev parent reply other threads:[~2017-01-02 22:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-01 17:28 [PATCH] [media] cx231xx: Initial support for Evromedia USB Full Hybrid Full HD Oleh Kravchenko
2017-01-02 22:04 ` Oleh Kravchenko [this message]
2017-01-09 12:16 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec40fa1a-e84b-4a82-f8c2-28719ac29bb8@kaa.org.ua \
--to=oleg@kaa.org.ua \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).