linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Helen Koike <helen.koike@collabora.com>
To: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>,
	linux-media@vger.kernel.org
Cc: laurent.pinchart@ideasonboard.com, ezequiel@collabora.com,
	hverkuil@xs4all.nl, kernel@collabora.com, dafna3@gmail.com,
	sakari.ailus@linux.intel.com, linux-rockchip@lists.infradead.org,
	mchehab@kernel.org, tfiga@chromium.org
Subject: Re: [PATCH v2 2/2] media: admin-guide: add documentation file rkisp1.rst
Date: Tue, 25 Aug 2020 10:04:36 -0300	[thread overview]
Message-ID: <ff20a4a9-8396-cfff-02ae-9bb38055c894@collabora.com> (raw)
In-Reply-To: <20200818102703.30471-3-dafna.hirschfeld@collabora.com>



On 8/18/20 7:27 AM, Dafna Hirschfeld wrote:
> Add the file 'rkisp1.rst' that documents the rkisp1 driver.
> 
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

lgtm

Acked-by: Helen Koike <helen.koike@collabora.com>

Thanks!
Helen


> ---
>  Documentation/admin-guide/media/rkisp1.dot    |  18 ++
>  Documentation/admin-guide/media/rkisp1.rst    | 181 ++++++++++++++++++
>  .../admin-guide/media/v4l-drivers.rst         |   1 +
>  3 files changed, 200 insertions(+)
>  create mode 100644 Documentation/admin-guide/media/rkisp1.dot
>  create mode 100644 Documentation/admin-guide/media/rkisp1.rst
> 
> diff --git a/Documentation/admin-guide/media/rkisp1.dot b/Documentation/admin-guide/media/rkisp1.dot
> new file mode 100644
> index 000000000000..54c1953a6130
> --- /dev/null
> +++ b/Documentation/admin-guide/media/rkisp1.dot
> @@ -0,0 +1,18 @@
> +digraph board {
> +	rankdir=TB
> +	n00000001 [label="{{<port0> 0 | <port1> 1} | rkisp1_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3}}", shape=Mrecord, style=filled, fillcolor=green]
> +	n00000001:port2 -> n00000006:port0
> +	n00000001:port2 -> n00000009:port0
> +	n00000001:port3 -> n00000014 [style=bold]
> +	n00000006 [label="{{<port0> 0} | rkisp1_resizer_mainpath\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> +	n00000006:port1 -> n0000000c [style=bold]
> +	n00000009 [label="{{<port0> 0} | rkisp1_resizer_selfpath\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> +	n00000009:port1 -> n00000010 [style=bold]
> +	n0000000c [label="rkisp1_mainpath\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
> +	n00000010 [label="rkisp1_selfpath\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> +	n00000014 [label="rkisp1_stats\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
> +	n00000018 [label="rkisp1_params\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
> +	n00000018 -> n00000001:port1 [style=bold]
> +	n0000001c [label="{{} | imx219 4-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> +	n0000001c:port0 -> n00000001:port0
> +}
> diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst
> new file mode 100644
> index 000000000000..42e37ed255f6
> --- /dev/null
> +++ b/Documentation/admin-guide/media/rkisp1.rst
> @@ -0,0 +1,181 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +.. include:: <isonum.txt>
> +
> +=========================================
> +Rockchip Image Signal Processor (rkisp1)
> +=========================================
> +
> +Introduction
> +============
> +
> +This file documents the driver for the Rockchip ISP1 that is part of RK3288
> +and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1
> +and uses the Media-Controller API.
> +
> +Topology
> +========
> +.. _rkisp1_topology_graph:
> +
> +.. kernel-figure:: rkisp1.dot
> +    :alt:   Diagram of the default media pipeline topology
> +    :align: center
> +
> +
> +The driver has 4 video devices:
> +
> +- rkisp1_mainpath: capture device for retrieving images, usually in higher
> +  resolution.
> +- rkisp1_selfpath: capture device for retrieving images.
> +- rkisp1_stats: a metadata capture device that sends statistics.
> +- rkisp1_params: a metadata output device that receives parameters
> +  configurations from userspace.
> +
> +The driver has 3 subdevices:
> +
> +- rkisp1_resizer_mainpath: used to resize and downsample frames for the
> +  mainpath capture device.
> +- rkisp1_resizer_selfpath: used to resize and downsample frames for the
> +  selfpath capture device.
> +- rkisp1_isp: is connected to the sensor and is responsible for all the isp
> +  operations.
> +
> +
> +rkisp1_mainpath, rkisp1_selfpath - Frames Capture Video Nodes
> +-------------------------------------------------------------
> +Those are the `mainpath` and `selfpath` capture devices to capture frames.
> +Those entities are the DMA engines that write the frames to memory.
> +The selfpath video device can capture YUV/RGB formats. Its input is YUV encoded
> +stream and it is able to convert it to RGB. The selfpath is not able to
> +capture bayer formats.
> +The mainpath can capture both bayer and YUV formats but it is not able to
> +capture RGB formats.
> +Both capture videos support
> +the ``V4L2_CAP_IO_MC`` :ref:`capability <device-capabilities>`.
> +
> +
> +rkisp1_resizer_mainpath, rkisp1_resizer_selfpath - Resizers Subdevices Nodes
> +----------------------------------------------------------------------------
> +Those are resizer entities for the mainpath and the selfpath. Those entities
> +can scale the frames up and down and also change the YUV sampling (for example
> +YUV4:2:2 -> YUV4:2:0). They also have cropping capability on the sink pad.
> +The resizers entities can only operate on YUV:4:2:2 format
> +(MEDIA_BUS_FMT_YUYV8_2X8).
> +The mainpath capture device supports capturing video in bayer formats. In that
> +case the resizer of the mainpath is set to 'bypass' mode - it just forward the
> +frame without operating on it.
> +
> +rkisp1_isp - Image Signal Processing Subdevice Node
> +---------------------------------------------------
> +This is the isp entity. It is connected to the sensor on sink pad 0 and
> +receives the frames using the CSI-2 protocol. It is responsible of configuring
> +the CSI-2 protocol. It has a cropping capability on sink pad 0 that is
> +connected to the sensor and on source pad 2 connected to the resizer entities.
> +Cropping on sink pad 0 defines the image region from the sensor.
> +Cropping on source pad 2 defines the region for the Image Stabilizer (IS).
> +
> +.. _rkisp1_stats:
> +
> +rkisp1_stats - Statistics Video Node
> +------------------------------------
> +The statistics video node outputs the 3A (auto focus, auto exposure and auto
> +white balance) statistics, and also histogram statistics for the frames that
> +are being processed by the rkisp1 to userspace applications.
> +Using these data, applications can implement algorithms and re-parameterize
> +the driver through the rkisp_params node to improve image quality during a
> +video stream.
> +The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`, and
> +userspace should set
> +:ref:`V4L2_META_FMT_RK_ISP1_STAT_3A <v4l2-meta-fmt-stat-rkisp1>` as the
> +dataformat.
> +
> +.. _rkisp1_params:
> +
> +rkisp1_params - Parameters Video Node
> +-------------------------------------
> +The rkisp1_params video node receives a set of parameters from userspace
> +to be applied to the hardware during a video stream, allowing userspace
> +to dynamically modify values such as black level, cross talk corrections
> +and others.
> +
> +The buffer format is defined by struct :c:type:`rkisp1_params_cfg`, and
> +userspace should set
> +:ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-params-rkisp1>` as the
> +dataformat.
> +
> +
> +Capturing Video Frames Example
> +==============================
> +
> +In the following example, the sensor connected to pad 0 of 'rkisp1_isp' is
> +imx219.
> +
> +The following commands can be used to capture video from the selfpath video
> +node with dimension 900x800 planar format YUV 4:2:2. It uses all cropping
> +capabilities possible, (see explanation right below)
> +
> +.. code-block:: bash
> +
> +	# set the links
> +	"media-ctl" "-d" "platform:rkisp1" "-r"
> +	"media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]"
> +	"media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]"
> +	"media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [0]"
> +
> +	# set format for imx219 4-0010:0
> +	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]'
> +
> +	# set format for rkisp1_isp pads:
> +	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
> +	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
> +
> +	# set format for rkisp1_resizer_selfpath pads:
> +	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
> +	"media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]'
> +
> +	# set format for rkisp1_selfpath:
> +	"v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800,"
> +	"v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P"
> +
> +	# start streaming:
> +	v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "10"
> +
> +
> +In the above example the sensor is configured to bayer format:
> +`SRGGB10_1X10/1640x1232`. The rkisp1_isp:0 pad should be configured to the
> +same mbus format and dimensions as the sensor, otherwise streaming will fail
> +with 'EPIPE' error. So it is also configured to `SRGGB10_1X10/1640x1232`.
> +In addition, the rkisp1_isp:0 pad is configured to cropping `(0,0)/1600x1200`.
> +
> +The cropping dimensions are automatically propagated to be the format of the
> +isp source pad `rkisp1_isp:2`. Another cropping operation is configured on
> +the isp source pad: `(0,0)/1500x1100`.
> +
> +The resizer's sink pad `rkisp1_resizer_selfpath` should be configured to format
> +`YUYV8_2X8/1500x1100` in order to match the format on the other side of the
> +link. In addition a cropping `(300,400)/1400x1000` is configured on it.
> +
> +The source pad of the resizer, `rkisp1_resizer_selfpath:1` is configured to
> +format `YUYV8_2X8/900x800`. That means that the resizer first crop a window
> +of `(300,400)/1400x100` from the received frame and then scales this window
> +to dimension `900x800`.
> +
> +Note that the above example does not uses the stats-params control loop.
> +Therefore the capture frames will not go through the 3A algorithms and
> +probably won't have a good quality, and can even look dark and greenish.
> +
> +Configuring Quantization
> +========================
> +
> +The driver supports limited and full range quantization on YUV formats,
> +where limited is the default.
> +To switch between one or the other, userspace should use the Colorspace
> +Conversion API (CSC) for subdevices on source pad 2 of the
> +isp (`rkisp1_isp:2`). The quantization configured on this pad is the
> +quantization of the captured video frames on the mainpath and selfpath
> +video nodes.
> +Note that the resizer and capture entities will always report
> +``V4L2_QUANTIZATION_DEFAULT`` even if the quantization is configured to full
> +range on `rkisp1_isp:2`. So in order to get the configured quantization,
> +application should get it from pad `rkisp1_isp:2`.
> +
> diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
> index 251cc4ede0b6..9c7ebe2ca3bd 100644
> --- a/Documentation/admin-guide/media/v4l-drivers.rst
> +++ b/Documentation/admin-guide/media/v4l-drivers.rst
> @@ -25,6 +25,7 @@ Video4Linux (V4L) driver-specific documentation
>  	philips
>  	qcom_camss
>  	rcar-fdp1
> +	rkisp1
>  	saa7134
>  	si470x
>  	si4713
> 

  reply	other threads:[~2020-08-25 13:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-18 10:27 [PATCH v2 0/2] media: admin-guide: add documentation for rkisp1 Dafna Hirschfeld
2020-08-18 10:27 ` [PATCH v2 1/2] media: pixfmt-meta-rkisp1.rst: add description of rkisp1 metadata formats in pixfmt-meta-rkisp1.rst Dafna Hirschfeld
2020-08-25 13:04   ` Helen Koike
2020-08-18 10:27 ` [PATCH v2 2/2] media: admin-guide: add documentation file rkisp1.rst Dafna Hirschfeld
2020-08-25 13:04   ` Helen Koike [this message]
2020-09-17 10:52 ` [PATCH v2 0/2] media: admin-guide: add documentation for rkisp1 Hans Verkuil
2020-09-17 15:06   ` Dafna Hirschfeld

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ff20a4a9-8396-cfff-02ae-9bb38055c894@collabora.com \
    --to=helen.koike@collabora.com \
    --cc=dafna.hirschfeld@collabora.com \
    --cc=dafna3@gmail.com \
    --cc=ezequiel@collabora.com \
    --cc=hverkuil@xs4all.nl \
    --cc=kernel@collabora.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).