From: Jungo Lin <jungo.lin@mediatek.com>
To: Helen Koike <helen.koike@collabora.com>
Cc: ryan.yu@mediatek.com, frankie.chiu@mediatek.com,
laurent.pinchart@ideasonboard.com, robh@kernel.org,
Rynn.Wu@mediatek.com, suleiman@chromium.org,
Jerry-ch.Chen@mediatek.com, frederic.chen@mediatek.com,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
hverkuil-cisco@xs4all.nl, sj.huang@mediatek.com,
yuzhao@chromium.org, linux-mediatek@lists.infradead.org,
matthias.bgg@gmail.com, mchehab@kernel.org,
linux-arm-kernel@lists.infradead.org, Sean.Cheng@mediatek.com,
srv_heupstream@mediatek.com, shik@chromium.org,
tfiga@chromium.org, zwisler@chromium.org,
ddavenport@chromium.org
Subject: Re: [v6, 0/5] media: media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver
Date: Fri, 10 Apr 2020 18:32:42 +0800 [thread overview]
Message-ID: <1586514762.8406.114.camel@mtksdccf07> (raw)
In-Reply-To: <23b9c2f4-04d4-38e0-c71f-7e1ef93265a2@collabora.com>
Hi Helen:
Thanks for your comment.
On Tue, 2020-03-31 at 12:34 -0300, Helen Koike wrote:
> Hi Jungo,
>
> I was taking a look at this patchset, please see my comments below.
>
> On 12/19/19 3:49 AM, Jungo Lin wrote:
> > Hello,
> >
> > This patch series adding the driver for Pass 1 (P1) unit in
> > Mediatek's camera ISP system on mt8183 SoC, which will be used in
> > camera features of CrOS.
> >
> > Pass 1 unit processes image signal from sensor devices and accepts the
> > tuning parameters to adjust the image quality. It performs optical
> > black correction, defect pixel correction, W/IR imbalance correction
> > and lens shading correction for RAW processing.
> >
> > The driver is implemented with V4L2 and media controller framework so
> > we have the following entities to describe the ISP pass 1 path.
> >
> > (The current metadata interface used in meta input and partial meta
> > nodes is only a temporary solution to kick off the driver development
> > and is not ready to be reviewed yet.)
> >
> > 1. meta input (output video device): connect to ISP P1 sub device.
> > It accepts the tuning buffer from user.
> >
> > 2. ISP P1 (sub device): connect to partial meta 0/1/2/3,
> > main stream and packed out video devices. When processing an image,
> > Pass 1 hardware supports multiple output images with different sizes
> > and formats so it needs two capture video devices ("main stream" and
> > "packed out") to return the image data to the user.
> >
> > 3. main stream (capture video device): return the processed image data
> > which is used in capture scenario.
> >
> > 4. packed out (capture video device): return the processed image data
> > which is used in preview scenario.
> >
> > 5. partial meta 0 (capture video device): return the AE/AWB statistics.
> >
> > 6. partial meta 1 (capture video device): return the AF statistics.
> >
> > 7. partial meta 2 (capture video device): return the local contrast
> > enhanced statistics.
> >
> > 8. partial meta 3 (capture video device): return the local motion
> > vector statistics.
> >
> > The overall patches of the series is:
> >
> > * Patch 1 & 2 are dt-bindings & dts information related to ISP P1 driver.
> > * Patch 3 adds new timestamp type for Camera AR (Augmented Reality) application
> > * Patch 4 extends the original V4L2 image & meta formats for ISP P1 driver.
> > * Patch 5 is the heart of ISP P1 driver. It handles the ISP HW configuration.
> > Moreover, implement standard V4L2 video driver that utilizes
> > V4L2 and media framework APIs. Communicate with co-process via SCP
> > communication to compose ISP registers in the firmware.
> >
> > Here is ISP P1 media topology:
> > It is included the main/sub sensor, sen-inf sub-devices and len device
> > which are implemented in below patch[1][2][3][4]:
>
> I would be nice if you could provide a branch with those applied.
>
We apply those patches in the chromeos-4.19 to test.
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/heads/chromeos-4.19
> >
> > For Mediatek ISP P1 driver, it also depends on MT8183 SCP[5] & IOMMU[6]
> > patch sets.
> >
> > /usr/bin/media-ctl -p -d /dev/media2
> >
> > Media controller API version 4.19.89
> >
> > Media device information
> > ------------------------
> > driver mtk-cam-p1
> > model mtk-cam-p1
> > serial
> > bus info platform:1a000000.camisp
> > hw revision 0x0
> > driver version 4.19.89
> >
> > Device topology
> > - entity 1: mtk-cam-p1 (12 pads, 8 links)
>
> If I understand correctly, the hardware supports 3 ISP instances, A, B, and C, and only B is being used.
> Is this correct?
>
> So maybe, rename it to mtk-isp-p1-b, to allow mtk-isp-p1-a and mtk-isp-p1-c to be added in the future.
>
Currently, we only support single-cam in this SoC with upstream driver.
It is plan in next Mediatek SoC to support multi-cam capabilities. So
we'd like to keep the naming to avoid confusion.
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev0
> > pad0: Sink
> > <- "mtk-cam-p1 meta input":0 []
>
> I would prefer the name params, or parameters, since input/output is confusing, since this is a output video node.
>
Ok, we will revise our naming in next patch.
> > pad1: Source
> > -> "mtk-cam-p1 main stream":0 [ENABLED,IMMUTABLE]
>
> Is there any reason for this link to be IMMUTABLE? Can't a use "mtk-cam-p1 packed out" without configuring "mtk-cam-p1 main stream" ?
>
Yes, you are right. We will remove IMMUTABLE flag in next patch.
> > pad2: Source
> > -> "mtk-cam-p1 packed out":0 []
>
> Same here, maybe "packed stream" ? Just for curiosity, why is it called packed?
>
Comparing with V4L2_PIX_FMT_SGBRG8, we packed the color bits without no
padding in the memory. We may revise the naming in next patch.
> > pad3: Source
> > -> "mtk-cam-p1 partial meta 0":0 []
> > pad4: Source
> > -> "mtk-cam-p1 partial meta 1":0 []
> > pad5: Source
> > -> "mtk-cam-p1 partial meta 2":0 []
> > pad6: Source
> > -> "mtk-cam-p1 partial meta 3":0 []
>
> Shouldn't those links be [ENABLED,IMMUTABLE] ?
>
> It would be better to have a more intuitive naming, e.g. "mtk-cam-p1 AE/AWB stats", "mtk-cam-p1 AF stats",
> "mtk-cam-p1 contrast stats", "mtk-cam-p1 motion stats", what do you think?
>
> I also would prefer to remove blank spaces.
>
> And maybe the prefix could be mtkisp-p1 ? (just to be similar with rkisp1), but I don't have strong feelings about this.
>
No, these links are optional to setup for userspace.
For naming part, we will align with driver source codes.
> > pad7: Source
> > pad8: Source
> > pad9: Source
> > pad10: Source
>
> Why source pads that are not connected to anything? (I guess I need to check the last patch better).
>
These pads are just reserved purpose.
We will plan to remove them in next patch.
Thanks,
Jungo
> Regards,
> Helen
>
> > pad11: Sink
> > <- "1a040000.seninf":4 [ENABLED,IMMUTABLE]
> >
> > - entity 14: mtk-cam-p1 meta input (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video2
> > pad0: Source
> > -> "mtk-cam-p1":0 []
> >
> > - entity 20: mtk-cam-p1 main stream (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video3
> > pad0: Sink
> > <- "mtk-cam-p1":1 [ENABLED,IMMUTABLE]
> >
> > - entity 26: mtk-cam-p1 packed out (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video4
> > pad0: Sink
> > <- "mtk-cam-p1":2 []
> >
> > - entity 32: mtk-cam-p1 partial meta 0 (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video5
> > pad0: Sink
> > <- "mtk-cam-p1":3 []
> >
> > - entity 38: mtk-cam-p1 partial meta 1 (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video6
> > pad0: Sink
> > <- "mtk-cam-p1":4 []
> >
> > - entity 44: mtk-cam-p1 partial meta 2 (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video7
> > pad0: Sink
> > <- "mtk-cam-p1":5 []
> >
> > - entity 50: mtk-cam-p1 partial meta 3 (1 pad, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video8
> > pad0: Sink
> > <- "mtk-cam-p1":6 []
> >
> > - entity 56: 1a040000.seninf (12 pads, 3 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev1
> > pad0: Sink
> > [fmt:SGRBG10_1X10/3264x2448 field:none colorspace:srgb]
> > <- "ov8856 2-0010":0 [ENABLED]
> > pad1: Sink
> > [fmt:SRGGB10_1X10/1600x1200 field:none colorspace:srgb]
> > <- "ov02a10 4-003d":0 []
> > pad2: Sink
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad3: Sink
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad4: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > -> "mtk-cam-p1":11 [ENABLED,IMMUTABLE]
> > pad5: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad6: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad7: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad8: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad9: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad10: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> > pad11: Source
> > [fmt:SBGGR10_1X10/1600x1200 field:none colorspace:srgb]
> >
> > - entity 69: ov8856 2-0010 (1 pad, 1 link)
> > type V4L2 subdev subtype Sensor flags 0
> > device node name /dev/v4l-subdev2
> > pad0: Source
> > [fmt:SBGGR10_1X10/3264x2448 field:none colorspace:unknown ycbcr:709]
> > -> "1a040000.seninf":0 [ENABLED]
> >
> > - entity 73: dw9768 2-000c (0 pad, 0 link)
> > type V4L2 subdev subtype Lens flags 0
> > device node name /dev/v4l-subdev3
> >
> > - entity 74: ov02a10 4-003d (1 pad, 1 link)
> > type V4L2 subdev subtype Sensor flags 0
> > device node name /dev/v4l-subdev4
> > pad0: Source
> > [fmt:SRGGB10_1X10/1600x1200 field:none]
> > -> "1a040000.seninf":1 []
> >
> > ===========
> > = history =
> > ===========
> >
> > version 6:
> > - Add port node description in the dt-binding document and device tree
> > by Tomasz Figa.
> > - Remove RGB format definitions in pixfmt-rgb.rst for kernel v5.5-rc1
> > version.
> > - Revise help description for VIDEO_MEDIATEK_ISP_PASS1.
> > - Apply SCP v21 change in P1 driver by Pi-Hsun Shih.
> > - Correct auto suspend timer value for suspend/resume issue.
> > - Increase IPI guard timer to 1 second to avoid false alarm command
> > timeout event.
> > - Fix KE due to no sen-inf sub-device.
> >
> > Todo:
> > - vb2_ops's buf_request_complete callback function implementation.
> > - Add rst documents for Mediatek meta formats.
> > - New meta buffer structure design & re-factoring.
> >
> > version 5:
> > - Fixed Rob's comment on dt-binding format
> > - Fix Tomasz's comment in mtk_isp_pm_suspend function
> > - Support V4L2_BUF_FLAG_TIMESTAMP_BOOTTIME timestamp flag
> > and new timestamp type in driver
> > - Fix buffer en-queue timing issue in v4
> > - Remove default link_notify callback function in mtk_cam_media_ops
> >
> > Todo:
> > - vb2_ops's buf_request_complete callback function implementation
> > - Add rst documents for Mediatek meta formats
> > - New meta buffer structure design & re-factoring
> > - Align and pack IPI command structures for EC ROM size shrink
> >
> > version 4:
> > - Fix Tomasz's comments which are addressed in MTK ISP P1 driver v3
> > patch[4]
> > - Fix some Tomasz comments which are addressed in DIP's v2 patch[5]
> > - Extend Mediatek proprietary image formats to support bayer order
> > - Support V4L2_BUF_FLAG_TSTAMP_SRC_SOE for capture devices
> >
> > Todo:
> > - vb2_ops's buf_request_complete callback function implementation
> > - Add rst documents for Mediatek meta formats
> > - New meta buffer structure design & re-factoring
> > - Support V4L2_BUF_FLAG_TIMESTAMP_BOOTTIME timestamp flag
> > - Align and pack IPI command structures for EC ROM size shrink
> >
> > version 3:
> > - Remove ISP Pass 1 reserved memory device node and change to use SCP's
> > reserved memory region. (Rob Herring)
> > - Fix comments of ISP Pass 1 device node & dt-bindings document (Rob Herring)
> > - Revise ISP Pass1 Kconfig
> > - Add rst documents for Mediatek image formats (Hans Verkuil)
> > - Fix kernel warning messages when running v4l2_compliance test
> > - Move AFO buffer enqueue & de-queue from request API to non-request
> > - mtk_cam-ctrl.h/mtk_cam-ctrl.c
> > Revise Mediatek ISP Pass1 specific V4L2 control naming & file licence
> > declaration (Hans Verkuil)
> > Split GET_BIN_INFO control into two controls to get width & height
> > in-dependently (Hans Verkuil)
> > - mtk_cam-v4l2-util.h/mtk_cam-v4l2-util.c
> > Merging mtk_cam-dev.c and mtk_cam-v4l2-util.c. (Drew Davenport)
> > Remove the pix_mode argument in related functions and unreachable code. (Drew Davenport)
> > Fix Drew's comments which are addressed in v2 patch
> > Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> > - mtk_cam-regs.h / mtk_cam.h / mtk_cam.c
> > Fix Drew's comments which are addressed in v2 patch
> > Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> > Refactoring mtk_isp_config & mtk_isp_req_enqueue functions
> > - mtk_cam-scp.h / mtk_cam-scp.c
> > Move function declarations from mtk_cam.h to mtk_cam-scp.h (Drew Davenport)
> > Fix some Tomasz comments which are addressed in DIP's v1 patch[3]
> > Fix ISP de-initialize timing KE issue
> > - mtk_cam-smem.h / mtk_cam-smem-dev.c
> > Get the reserved shared memory via SCP driver (Tomasz Figa)
> >
> > Todo:
> > - Add rst documents for Mediatek meta formats
> > - New meta buffer structure design & re-factoring
> >
> > version 2:
> > - Add 3A enhancement feature which includes:
> > Separates 3A pipeline out of frame basis to improve
> > AE/AWB (exposure and white balance) performance.
> > Add 2 SCP sub-commands for 3A meta buffers.
> > - Add new child device to manage P1 shared memory between P1 HW unit
> > and co-processor.
> > - Remove mediatek,cam_smem.txt & cam_smem dts node in mt8183.dtsi.
> > - Revised document wording for dt-bindings documents & dts information.
> > - Remove mtk_cam-ctx.h & mtk_cam-dev-ctx-core.c and move these
> > source codes to mtk_cam-dev.h & mtk_cam-dev.c.
> > - mtk_cam-dev.h / mtk_cam-dev.c
> > Revised mtk_cam_video_device & mtk_cam_dev to remove unused structure fields
> > or add comments.
> > Revised buffer size for LMVO & LCSO.
> > Fix pixel format utility function.
> > Add vb2_dma_contig_set_max_seg_size to configure DMA max segment size.
> > - mtk_cam-v4l2-util.c
> > Refactoring V4L2 async mechanism with seninf driver only
> > Refactoring CIO (Connection IO) implementation with active sensor
> > Revised stream on function for 3A enhancement feature
> > Add new V4L2 en-queue/de-queue utility functions for 3A enhancement feature
> > - mtk_cam-regs.h / mtk_cam.h / mtk_cam.c
> > Add meta buffer index register definitions
> > Add meta DMA configuration function.
> > Separate with frame-base and non-frame-base en-queue/de-queue functions
> > Add isp_setup_scp_rproc function to get RPC handle
> > Add mtk_cam_reserved_memory_init for shared memory management
> > - mtk_cam-scp.h / mtk_cam-scp.c
> > Add new meta strictures for 3A enhancement feature
> > Add new IPI command utility function for 3A enhancement feature
> > Enhance isp_composer_dma_sg_init function flow
> > Shorten overall IPI command structure size
> > Remove scp_state state checking
> > Improve code readability
> > - mtk_cam-smem.h / mtk_cam-smem-dev.c
> > Add mtk_cam_alloc_smem_dev to allocate one new child device of ISP driver.
> > Handling P1 driver 's reserved memory & allocate DMA buffers based on this
> > memory region.
> >
> > TODOs:
> > - 3A enhancement feature bug fixing
> >
> > version 1:
> > - Revised driver sources based on Tomasz's comments including
> > part1/2/3/4 in RFC V0 patch.
> > - Remove DMA cache mechanism.
> > Support two new video devices (LCSO/LMVO) for advance camera
> > features.
> > - Fixed v4l2-compliance test failure items.
> > - Add private controls for Mediatek camera middle-ware.
> > - Replace VPU driver's APIs with new SCP driver interface for
> > co-processor communication.
> > - Refactoring mtk_cam_scp.c to use ring-buffers mechanism for IPI
> > commands RX handling.
> > - Fix internal bugs.
> >
> > TODOs:
> > - Remove mtk_cam_smem_drv.c & mtk_cam_smem.h and implement DMA pool
> > for shared memory management.
> > - Revised file names.
> > - Support non frame-sync AFO/AAO DMA buffers
> >
> > version 0:
> > - Initial submission
> >
> > ==================
> > Dependent patch set
> > ==================
> >
> > Camera ISP P1 driver depends on seninf driver, SCP driver.
> > The patches are listed as following:
> >
> > [1]. media: support Mediatek sensor interface driver
> > https://patchwork.kernel.org/cover/11145845/
> >
> > [2]. media: ov8856: Add YAML binding and sensor mode support
> > https://patchwork.kernel.org/cover/11220785/
> >
> > [3]. media: i2c: Add support for OV02A10 sensor
> > https://patchwork.kernel.org/cover/11284779/
> >
> > [4]. media: i2c: add support for DW9768 VCM driver
> > https://patchwork.kernel.org/cover/11132299/
> >
> > [5]. Add support for mt8183 SCP
> > https://patchwork.kernel.org/cover/11239065/
> >
> > [6]. MT8183 IOMMU SUPPORT
> > https://patchwork.kernel.org/cover/11112765/
> >
> > ==================
> > Compliance test
> > ==================
> >
> > The v4l2-compliance is built with the below lastest patch.
> > https://git.linuxtv.org/v4l-utils.git/commit/?id=e9a7593ec6ae98704ecb35ea64948d34c23a5158
> >
> > Note 1.
> > This testing depends on the above seninf, sensors and len patches[1][2][3][4].
> >
> > Note 2.
> > For failed test csaes in video2~8, it is caused by new V4L2 timestamp
> > called V4L2_BUF_FLAG_TIMESTAMP_BOOTIME.
> >
> > Note 3.
> > The current some failure items are related to Mediatek sensors/len driver [2][3][3]
> >
> > /usr/bin/v4l2-compliance -m /dev/media2
> >
> > v4l2-compliance SHA: not available, 32 bits
> >
> > Compliance test for mtk-cam-p1 device /dev/media1:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.67
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.67
> >
> > Required ioctls:
> > test MEDIA_IOC_DEVICE_INFO: OK
> >
> > Allow for multiple opens:
> > test second /dev/media1 open: OK
> > test MEDIA_IOC_DEVICE_INFO: OK
> > test for unlimited opens: OK
> >
> > Media Controller ioctls:
> > test MEDIA_IOC_G_TOPOLOGY: OK
> > Entities: 11 Interfaces: 11 Pads: 33 Links: 21
> > test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> > test MEDIA_IOC_SETUP_LINK: OK
> >
> > Total for mtk-cam-p1 device /dev/media1: 7, Succeeded: 7, Failed: 0, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video25:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.67
> > Capabilities : 0x8c200000
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x0c200000
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.67
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.67
> > Interface Info:
> > ID : 0x03000010
> > Type : V4L Video
> > Entity Info:
> > ID : 0x0000000e (14)
> > Name : mtk-cam-p1 meta input
> > Function : V4L2 I/O
> > Pad 0x0100000f : 0: Source
> > Link 0x02000012: to remote pad 0x1000002 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video25 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composiv4l2-compliance SHA: not available, 32 bits
> >
> > Compliance test for mtk-cam-p1 device /dev/media2:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> >
> > Required ioctls:
> > test MEDIA_IOC_DEVICE_INFO: OK
> >
> > Allow for multiple opens:
> > test second /dev/media2 open: OK
> > test MEDIA_IOC_DEVICE_INFO: OK
> > test for unlimited opens: OK
> >
> > Media Controller ioctls:
> > test MEDIA_IOC_G_TOPOLOGY: OK
> > Entities: 12 Interfaces: 12 Pads: 33 Links: 22
> > test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
> > test MEDIA_IOC_SETUP_LINK: OK
> >
> > Total for mtk-cam-p1 device /dev/media2: 7, Succeeded: 7, Failed: 0, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video2:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x8c200000
> > Metadata Output
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x0c200000
> > Metadata Output
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000010
> > Type : V4L Video
> > Entity Info:
> > ID : 0x0000000e (14)
> > Name : mtk-cam-p1 meta input
> > Function : V4L2 I/O
> > Pad 0x0100000f : 0: Source
> > Link 0x02000012: to remote pad 0x1000002 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video2 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video2: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video3:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x84201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000016
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000014 (20)
> > Name : mtk-cam-p1 main stream
> > Function : V4L2 I/O
> > Pad 0x01000015 : 0: Sink
> > Link 0x02000018: from remote pad 0x1000003 of entity 'mtk-cam-p1': Data, Enabled, Immutable
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video3 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video3: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video4:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x84201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x0300001c
> > Type : V4L Video
> > Entity Info:
> > ID : 0x0000001a (26)
> > Name : mtk-cam-p1 packed out
> > Function : V4L2 I/O
> > Pad 0x0100001b : 0: Sink
> > Link 0x0200001e: from remote pad 0x1000004 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video4 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video4: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video5:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x84a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000022
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000020 (32)
> > Name : mtk-cam-p1 partial meta 0
> > Function : V4L2 I/O
> > Pad 0x01000021 : 0: Sink
> > Link 0x02000024: from remote pad 0x1000005 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video5 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video5: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video6:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x84a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000028
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000026 (38)
> > Name : mtk-cam-p1 partial meta 1
> > Function : V4L2 I/O
> > Pad 0x01000027 : 0: Sink
> > Link 0x0200002a: from remote pad 0x1000006 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video6 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video6: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video7:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x84a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x0300002e
> > Type : V4L Video
> > Entity Info:
> > ID : 0x0000002c (44)
> > Name : mtk-cam-p1 partial meta 2
> > Function : V4L2 I/O
> > Pad 0x0100002d : 0: Sink
> > Link 0x02000030: from remote pad 0x1000007 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video7 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video7: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/video8:
> >
> > Driver Info:
> > Driver name : mtk-cam-p1
> > Card type : mtk-cam-p1
> > Bus info : platform:1a000000.camisp
> > Driver version : 4.19.89
> > Capabilities : 0x84a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04a00000
> > Metadata Capture
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000034
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000032 (50)
> > Name : mtk-cam-p1 partial meta 3
> > Function : V4L2 I/O
> > Pad 0x01000033 : 0: Sink
> > Link 0x02000036: from remote pad 0x1000008 of entity 'mtk-cam-p1': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video8 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > fail: v4l2-test-buffers.cpp(370): timestamp != V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC && timestamp != V4L2_BUF_FLAG_TIMESTAMP_COPY
> > fail: v4l2-test-buffers.cpp(486): buf.check(Unqueued, i)
> > fail: v4l2-test-buffers.cpp(615): testQueryBuf(node, i, q.g_buffers())
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> > fail: v4l2-test-buffers.cpp(747): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing or malfunctioning.
> > fail: v4l2-test-buffers.cpp(748): VIDIOC_EXPBUF is supported, but the V4L2_MEMORY_MMAP support is missing, probably due to earlier failing format tests.
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK
> >
> > Total for mtk-cam-p1 device /dev/video8: 45, Succeeded: 44, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/v4l-subdev0:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000050
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x00000001 (1)
> > Name : mtk-cam-p1
> > Function : Video Pixel Formatter
> > Pad 0x01000002 : 0: Sink
> > Link 0x02000012: from remote pad 0x100000f of entity 'mtk-cam-p1 meta input': Data
> > Pad 0x01000003 : 1: Source
> > Link 0x02000018: to remote pad 0x1000015 of entity 'mtk-cam-p1 main stream': Data, Enabled, Immutable
> > Pad 0x01000004 : 2: Source
> > Link 0x0200001e: to remote pad 0x100001b of entity 'mtk-cam-p1 packed out': Data
> > Pad 0x01000005 : 3: Source
> > Link 0x02000024: to remote pad 0x1000021 of entity 'mtk-cam-p1 partial meta 0': Data
> > Pad 0x01000006 : 4: Source
> > Link 0x0200002a: to remote pad 0x1000027 of entity 'mtk-cam-p1 partial meta 1': Data
> > Pad 0x01000007 : 5: Source
> > Link 0x02000030: to remote pad 0x100002d of entity 'mtk-cam-p1 partial meta 2': Data
> > Pad 0x01000008 : 6: Source
> > Link 0x02000036: to remote pad 0x1000033 of entity 'mtk-cam-p1 partial meta 3': Data
> > Pad 0x01000009 : 7: Source
> > Pad 0x0100000a : 8: Source
> > Pad 0x0100000b : 9: Source
> > Pad 0x0100000c : 10: Source
> > Pad 0x0100000d : 11: Sink
> > Link 0x0200004e: from remote pad 0x100003d of entity '1a040000.seninf': Data, Enabled, Immutable
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev0 open: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 0):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 1):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 2):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 3):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 4):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 5):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 6):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 7):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 8):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 9):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 10):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 11):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for mtk-cam-p1 device /dev/v4l-subdev0: 125, Succeeded: 125, Failed: 0, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/v4l-subdev1:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000052
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x00000038 (56)
> > Name : 1a040000.seninf
> > Function : Video Interface Bridge
> > Pad 0x01000039 : 0: Sink
> > Link 0x02000047: from remote pad 0x1000046 of entity 'ov8856 2-0010': Data, Enabled
> > Pad 0x0100003a : 1: Sink
> > Link 0x0200004c: from remote pad 0x100004b of entity 'ov02a10 4-003d': Data
> > Pad 0x0100003b : 2: Sink
> > Pad 0x0100003c : 3: Sink
> > Pad 0x0100003d : 4: Source
> > Link 0x0200004e: to remote pad 0x100000d of entity 'mtk-cam-p1': Data, Enabled, Immutable
> > Pad 0x0100003e : 5: Source
> > Pad 0x0100003f : 6: Source
> > Pad 0x01000040 : 7: Source
> > Pad 0x01000041 : 8: Source
> > Pad 0x01000042 : 9: Source
> > Pad 0x01000043 : 10: Source
> > Pad 0x01000044 : 11: Source
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev1 open: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 0):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 1):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 2):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 3):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 4):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 5):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 6):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 7):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 8):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 9):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 10):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 11):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 2 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for mtk-cam-p1 device /dev/v4l-subdev1: 125, Succeeded: 125, Failed: 0, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/v4l-subdev2:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000054
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x00000045 (69)
> > Name : ov8856 2-0010
> > Function : Camera Sensor
> > Pad 0x01000046 : 0: Source
> > Link 0x02000047: to remote pad 0x1000039 of entity '1a040000.seninf': Data, Enabled
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev2 open: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 0):
> > fail: v4l2-test-subdevs.cpp(147): doioctl(node, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, &fse)
> > fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
> > fail: v4l2-test-subdevs.cpp(313): fmt.code == 0 || fmt.code == ~0U
> > fail: v4l2-test-subdevs.cpp(356): checkMBusFrameFmt(node, fmt.format)
> > test Try VIDIOC_SUBDEV_G/S_FMT: FAIL
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > fail: v4l2-test-subdevs.cpp(147): doioctl(node, VIDIOC_SUBDEV_ENUM_FRAME_SIZE, &fse)
> > fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > fail: v4l2-test-controls.cpp(830): subscribe event for control 'User Controls' failed
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 11 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for mtk-cam-p1 device /dev/v4l-subdev2: 48, Succeeded: 44, Failed: 4, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/v4l-subdev3:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000056
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x00000049 (73)
> > Name : dw9768 2-000c
> > Function : Lens Controller
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev3 open: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > fail: v4l2-test-controls.cpp(830): subscribe event for control 'Camera Controls' failed
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 2 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for mtk-cam-p1 device /dev/v4l-subdev3: 41, Succeeded: 40, Failed: 1, Warnings: 0
> > --------------------------------------------------------------------------------
> > Compliance test for mtk-cam-p1 device /dev/v4l-subdev4:
> >
> > Media Driver Info:
> > Driver name : mtk-cam-p1
> > Model : mtk-cam-p1
> > Serial :
> > Bus info : platform:1a000000.camisp
> > Media version : 4.19.89
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.19.89
> > Interface Info:
> > ID : 0x03000058
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x0000004a (74)
> > Name : ov02a10 4-003d
> > Function : Camera Sensor
> > Pad 0x0100004b : 0: Source
> > Link 0x0200004c: to remote pad 0x100003a of entity '1a040000.seninf': Data
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev4 open: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 0):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > fail: v4l2-test-controls.cpp(362): returned control value out of range
> > fail: v4l2-test-controls.cpp(431): invalid control 009e0902
> > test VIDIOC_G/S_CTRL: FAIL
> > fail: v4l2-test-controls.cpp(549): returned control value out of range
> > fail: v4l2-test-controls.cpp(665): invalid control 009e0902
> > test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
> > fail: v4l2-test-controls.cpp(830): subscribe event for control 'User Controls' failed
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 10 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test VIDIOC_EXPBUF: OK (Not Supported)
> > test Requests: OK (Not Supported)
> >
> > Total for mtk-cam-p1 device /dev/v4l-subdev4: 48, Succeeded: 45, Failed: 3, Warnings: 0
> >
> > Grand Total for mtk-cam-p1 device /dev/media2: 709, Succeeded: 694, Failed: 15, Warnings: 0
> >
> >
> > Jungo Lin (5):
> > media: dt-bindings: mt8183: Added camera ISP Pass 1
> > dts: arm64: mt8183: Add ISP Pass 1 nodes
> > media: videodev2.h: Add new boottime timestamp type
> > media: platform: Add Mediatek ISP P1 image & meta formats
> > media: platform: Add Mediatek ISP P1 V4L2 device driver
> >
> > .../bindings/media/mediatek,camisp.txt | 83 +
> > Documentation/media/uapi/v4l/buffer.rst | 11 +-
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr10.rst | 65 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr10f.rst | 90 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr12.rst | 61 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr12f.rst | 110 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr14.rst | 73 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr14f.rst | 110 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr8.rst | 51 +
> > .../media/uapi/v4l/pixfmt-mtisp-sbggr8f.rst | 78 +
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 38 +
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 1 +
> > drivers/media/platform/mtk-isp/Kconfig | 20 +
> > .../media/platform/mtk-isp/isp_50/Makefile | 3 +
> > .../platform/mtk-isp/isp_50/cam/Makefile | 6 +
> > .../platform/mtk-isp/isp_50/cam/mtk_cam-hw.c | 636 +++++
> > .../platform/mtk-isp/isp_50/cam/mtk_cam-hw.h | 64 +
> > .../platform/mtk-isp/isp_50/cam/mtk_cam-ipi.h | 222 ++
> > .../mtk-isp/isp_50/cam/mtk_cam-regs.h | 95 +
> > .../platform/mtk-isp/isp_50/cam/mtk_cam.c | 2087 +++++++++++++++++
> > .../platform/mtk-isp/isp_50/cam/mtk_cam.h | 244 ++
> > drivers/media/v4l2-core/v4l2-ioctl.c | 37 +
> > include/uapi/linux/videodev2.h | 41 +
> > 24 files changed, 4226 insertions(+), 1 deletion(-)
> > create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr10.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr10f.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr12.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr12f.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr14.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr14f.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr8.rst
> > create mode 100644 Documentation/media/uapi/v4l/pixfmt-mtisp-sbggr8f.rst
> > create mode 100644 drivers/media/platform/mtk-isp/Kconfig
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/Makefile
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-hw.c
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-hw.h
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-ipi.h
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam-regs.h
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam.c
> > create mode 100644 drivers/media/platform/mtk-isp/isp_50/cam/mtk_cam.h
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-04-10 10:43 UTC|newest]
Thread overview: 131+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Jungo Lin <jungo.lin@mediatek.com>
2019-04-02 10:04 ` [PATCH v1] media: media_device_enum_links32: fix missing reserved field copy Jungo Lin
2019-04-02 11:33 ` Laurent Pinchart
2019-04-03 0:30 ` Jungo Lin
2019-04-03 1:44 ` [PATCH] media: media_device_enum_links32: clean a reserved field Jungo Lin
2019-05-10 1:57 ` [RFC, V2, 00/11] meida: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-05-10 1:57 ` [RFC, V2, 01/11] dt-bindings: mt8183: Add binding for ISP Pass 1 reserved memory Jungo Lin
2019-05-14 19:50 ` [RFC,V2,01/11] " Rob Herring
2019-05-15 13:02 ` Jungo Lin
2019-05-10 1:57 ` [RFC,V2,02/11] dts: arm64: mt8183: Add ISP Pass 1 shared memory node Jungo Lin
2019-05-10 1:57 ` [RFC,V2,03/11] dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-05-14 19:54 ` Rob Herring
2019-05-16 6:12 ` Jungo Lin
2019-05-10 1:57 ` [RFC,V2,04/11] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-05-10 1:57 ` [RFC, V2, 05/11] media: platform: Add Mediatek ISP Pass 1 driver Kconfig Jungo Lin
2019-05-10 1:57 ` [RFC, V2, 06/11] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-05-13 8:35 ` Hans Verkuil
2019-05-15 12:49 ` Jungo Lin
2019-05-10 1:58 ` [RFC,V2,07/11] media: platform: Add Mediatek ISP P1 private control Jungo Lin
2019-05-13 8:46 ` Hans Verkuil
[not found] ` <49a8ba54-aba4-1915-6732-987a58e8bd3c-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2019-05-14 6:23 ` Jungo Lin
2019-10-02 10:55 ` Sakari Ailus
2019-10-02 11:02 ` Sakari Ailus
[not found] ` <Jungo Lin <jungo.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-05-10 1:58 ` [RFC,V2,08/11] media: platform: Add Mediatek ISP P1 V4L2 functions Jungo Lin
2019-05-24 18:49 ` Drew Davenport
2019-05-28 1:00 ` Jungo Lin
2019-05-10 1:58 ` [RFC,V2,09/11] media: platform: Add Mediatek ISP P1 device driver Jungo Lin
2019-05-24 21:19 ` [RFC, V2, 09/11] " Drew Davenport
2019-05-27 13:07 ` Jungo Lin
2019-05-10 1:58 ` [RFC, V2, 10/11] media: platform: Add Mediatek ISP P1 SCP communication Jungo Lin
2019-05-10 1:58 ` [RFC, V2, 11/11] media: platform: Add Mediatek ISP P1 shared memory device Jungo Lin
2019-08-07 12:47 ` [RFC, v4, 0/4] media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-08-07 12:48 ` [RFC,v4,1/4] media: dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-08-21 19:47 ` Rob Herring
2019-08-22 12:47 ` Jungo Lin
[not found] ` <20190807124803.29884-2-jungo.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-08-21 20:17 ` Rob Herring
2019-08-22 12:48 ` Jungo Lin
2019-08-07 12:48 ` [RFC,v4,2/4] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-08-07 12:48 ` [RFC, v4, 3/4] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-08-07 12:48 ` [RFC,v4,4/4] media: platform: Add Mediatek ISP P1 V4L2 device driver Jungo Lin
2019-09-02 7:51 ` [RFC, v5, 0/5] media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-09-02 7:51 ` [RFC,v5, 1/5] media: dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-09-02 15:17 ` [RFC, v5, " Rob Herring
2019-09-02 7:51 ` [RFC,v5, 2/5] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-09-02 7:51 ` [RFC,v5, 3/5] media: videodev2.h: Add new boottime timestamp type Jungo Lin
2019-09-02 7:51 ` [RFC, v5, 4/5] media: pixfmt: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-09-02 7:51 ` [RFC, v5, 5/5] media: platform: Add Mediatek ISP P1 V4L2 device driver Jungo Lin
2019-12-19 5:49 ` [v6, 0/5] media: media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-12-19 5:49 ` [v6, 1/5] media: dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2020-03-31 15:34 ` Helen Koike
2020-04-10 10:04 ` Jungo Lin
2019-12-19 5:49 ` [v6, 2/5] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-12-19 5:49 ` [v6, 3/5] media: videodev2.h: Add new boottime timestamp type Jungo Lin
2020-01-07 14:10 ` Hans Verkuil
2020-01-10 10:08 ` Jungo Lin
2019-12-19 5:49 ` [v6, 4/5] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2020-04-03 2:30 ` Laurent Pinchart
2020-04-10 10:00 ` Jungo Lin
2019-12-19 5:49 ` [v6, 5/5] media: platform: Add Mediatek ISP P1 V4L2 device driver Jungo Lin
2020-01-23 13:59 ` Hans Verkuil
2020-01-28 2:13 ` Jungo Lin
2020-03-31 15:34 ` Helen Koike
2020-04-09 2:05 ` Jungo Lin
2020-04-14 12:25 ` Helen Koike
[not found] ` <b2c30e560e9b4ec488957ca62bae09fe@mtkmbs01n2.mediatek.inc>
2020-05-04 12:27 ` Jungo Lin
2020-05-05 15:38 ` Helen Koike
2020-04-02 16:45 ` Dafna Hirschfeld
2020-04-09 2:49 ` Jungo Lin
2020-03-31 15:34 ` [v6, 0/5] media: media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Helen Koike
2020-04-10 10:32 ` Jungo Lin [this message]
2020-04-14 12:25 ` Helen Koike
[not found] ` <1fd3615eb18f48ada186bfe228fc907b@mtkmbs01n2.mediatek.inc>
2020-05-04 12:40 ` Jungo Lin
2020-05-05 15:30 ` Helen Koike
2020-05-05 16:18 ` Tomasz Figa
[not found] <jungo.lin@mediatek.com>
2019-03-28 9:56 ` [RFC V1 00/12] meida: " Jungo Lin
2019-03-28 9:56 ` [RFC V1 01/12] dt-bindings: mt8183: Add binding for ISP Pass 1 reserved memory Jungo Lin
2019-03-28 9:56 ` [RFC V1 02/12] dts: arm64: mt8183: Add ISP Pass 1 shared memory node Jungo Lin
2019-03-28 9:56 ` [RFC V1 03/12] dt-bindings: mt8183: Added cam-smem dt-bindings Jungo Lin
2019-03-28 9:56 ` [RFC V1 04/12] dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-03-28 9:56 ` [RFC V1 05/12] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-03-28 9:56 ` [RFC V1 08/12] media: platform: Add Mediatek ISP P1 private control Jungo Lin
2019-03-28 9:56 ` [RFC V1 09/12] media: platform: Add Mediatek ISP P1 V4L2 functions Jungo Lin
2019-03-28 9:56 ` [RFC V1 10/12] media: platform: Add Mediatek ISP P1 device driver Jungo Lin
[not found] ` <1553767007-11909-1-git-send-email-jungo.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-28 9:56 ` [RFC V1 06/12] media: platform: Add Mediatek ISP Pass 1 driver Kconfig Jungo Lin
2019-03-28 9:56 ` [RFC V1 07/12] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-03-28 9:56 ` [RFC V1 11/12] media: platform: Add Mediatek ISP P1 SCP communication Jungo Lin
2019-03-28 9:56 ` [RFC V1 12/12] media: platform: Add Mediatek ISP P1 shared memory driver Jungo Lin
2019-06-11 3:53 ` [RFC, V3 0/9] media: platform: mtk-isp: Add Mediatek ISP Pass 1 driver Jungo Lin
2019-06-11 3:53 ` [RFC,v3 1/9] dt-bindings: mt8183: Added camera ISP Pass 1 Jungo Lin
2019-06-11 3:53 ` [RFC,v3 2/9] dts: arm64: mt8183: Add ISP Pass 1 nodes Jungo Lin
2019-06-11 3:53 ` [RFC,v3 3/9] media: platform: Add Mediatek ISP Pass 1 driver Kconfig Jungo Lin
2019-06-11 3:53 ` [RFC, v3 4/9] media: platform: Add Mediatek ISP P1 image & meta formats Jungo Lin
2019-06-11 3:53 ` [RFC,v3 5/9] media: platform: Add Mediatek ISP P1 V4L2 control Jungo Lin
2019-07-01 5:50 ` Tomasz Figa
2019-07-02 11:34 ` Jungo Lin
2019-06-11 3:53 ` [RFC,v3 6/9] media: platform: Add Mediatek ISP P1 V4L2 functions Jungo Lin
2019-07-10 9:54 ` Tomasz Figa
2019-07-18 4:39 ` Jungo Lin
2019-07-23 10:21 ` Tomasz Figa
2019-07-24 4:31 ` Jungo Lin
2019-07-26 5:49 ` Tomasz Figa
2019-07-29 1:18 ` Jungo Lin
2019-07-29 10:04 ` Tomasz Figa
2019-07-30 1:44 ` Jungo Lin
2019-08-05 9:59 ` Tomasz Figa
2019-06-11 3:53 ` [RFC,v3 7/9] media: platform: Add Mediatek ISP P1 device driver Jungo Lin
2019-07-10 9:56 ` Tomasz Figa
2019-07-20 9:58 ` Jungo Lin
2019-07-25 9:23 ` Tomasz Figa
2019-07-26 7:23 ` Jungo Lin
2019-08-06 9:47 ` Tomasz Figa
2019-08-07 2:11 ` Jungo Lin
2019-08-07 13:25 ` Tomasz Figa
2019-06-11 3:53 ` [RFC,v3 8/9] media: platform: Add Mediatek ISP P1 SCP communication Jungo Lin
[not found] ` <20190611035344.29814-9-jungo.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-07-10 9:58 ` Tomasz Figa
2019-07-21 2:18 ` Jungo Lin
2019-07-25 10:56 ` [RFC, v3 " Tomasz Figa
2019-07-26 8:07 ` [RFC,v3 " Jungo Lin
2019-06-11 3:53 ` [RFC, v3 9/9] media: platform: Add Mediatek ISP P1 shared memory device Jungo Lin
2019-07-01 7:25 ` [RFC,v3 " Tomasz Figa
2019-07-05 3:33 ` Jungo Lin
2019-07-05 4:22 ` [RFC, v3 " Tomasz Figa
[not found] ` <CAAFQd5BaTQ-Q7gsE0X+d4_81OZq9WHaCYkmALt7_4A1JFo=_8g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-07-05 5:44 ` [RFC,v3 " Jungo Lin
2019-07-05 7:59 ` Jungo Lin
2019-07-23 7:20 ` [RFC, v3 " Tomasz Figa
[not found] ` <CAAFQd5AaNFpMGCVJREY85n8UetEwd99TOka8-ECoLzMbMkos_g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-07-23 8:21 ` Jungo Lin
2019-07-26 5:15 ` Tomasz Figa
[not found] ` <CAAFQd5Bh80N+cMhz=eyHUGJLaE5uuypOawQvHrTgGSMDvmcpLA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-07-26 7:41 ` Christoph Hellwig
2019-07-26 7:42 ` Tomasz Figa
[not found] ` <CAAFQd5CXwRm-3jD+rfNNDNLH=gT_i0QYSAG3XBo3SJnPTY56_w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-07-26 11:04 ` Robin Murphy
[not found] ` <4460bc91-352a-7f3a-cbed-1b95e743ca8c-5wv7dgnIgG8@public.gmane.org>
2019-07-26 11:59 ` Jungo Lin
2019-07-26 14:04 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1586514762.8406.114.camel@mtksdccf07 \
--to=jungo.lin@mediatek.com \
--cc=Jerry-ch.Chen@mediatek.com \
--cc=Rynn.Wu@mediatek.com \
--cc=Sean.Cheng@mediatek.com \
--cc=ddavenport@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=frankie.chiu@mediatek.com \
--cc=frederic.chen@mediatek.com \
--cc=helen.koike@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=ryan.yu@mediatek.com \
--cc=shik@chromium.org \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=suleiman@chromium.org \
--cc=tfiga@chromium.org \
--cc=yuzhao@chromium.org \
--cc=zwisler@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).