Re: [PATCH v2 7/8] dt-bindings: usb: convert mediatek,mtu3.txt to YAML schema

* [PATCH v2 1/8] dt-bindings: phy: convert phy-mtk-xsphy.txt to YAML schema
@ 2020-10-14  1:44 Chunfeng Yun
  2020-10-14  1:44 ` [PATCH v2 2/8] dt-bindings: phy: convert phy-mtk-tphy.txt " Chunfeng Yun
  0 siblings, 1 reply; 15+ messages in thread
From: Chunfeng Yun @ 2020-10-14  1:44 UTC (permalink / raw)
  To: linux-mediatek; +Cc: Chunfeng Yun, srv_heupstream

Convert phy-mtk-xsphy.txt to YAML schema mediatek,xsphy.yaml

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: modify description and compatible definition suggested by Rob
---
 .../bindings/phy/mediatek,xsphy.yaml          | 200 ++++++++++++++++++
 .../devicetree/bindings/phy/phy-mtk-xsphy.txt | 109 ----------
 2 files changed, 200 insertions(+), 109 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt

diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
new file mode 100644
index 000000000000..86511f19277a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek XS-PHY Controller Device Tree Bindings
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The XS-PHY controller supports physical layer functionality for USB3.1
+  GEN2 controller on MediaTek SoCs.
+
+  Banks layout of xsphy
+  ----------------------------------
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u2 port2    0x2000    MISC
+              ...
+  u31 common  0x3000    DIG_GLB
+              0x3100    PHYA_GLB
+  u31 port0   0x3400    DIG_LN_TOP
+              0x3500    DIG_LN_TX0
+              0x3600    DIG_LN_RX0
+              0x3700    DIG_LN_DAIF
+              0x3800    PHYA_LN
+  u31 port1   0x3a00    DIG_LN_TOP
+              0x3b00    DIG_LN_TX0
+              0x3c00    DIG_LN_RX0
+              0x3d00    DIG_LN_DAIF
+              0x3e00    PHYA_LN
+              ...
+  DIG_GLB & PHYA_GLB are shared by U31 ports.
+
+properties:
+  $nodename:
+    pattern: "^xs-phy@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt3611-xsphy
+          - mediatek,mt3612-xsphy
+      - const: mediatek,xsphy
+
+  reg:
+    description: |
+      Register shared by multiple U3 ports, exclude port's private register,
+      if only U2 ports provided, shouldn't use the property.
+    maxItems: 1
+
+  "#address-cells":
+      enum: [1, 2]
+
+  "#size-cells":
+      enum: [1, 2]
+
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 17
+
+# Required child node:
+patternProperties:
+  "^usb-phy@[0-9a-f]+$":
+    type: object
+    description: |
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+
+      clock-names:
+        items:
+          - const: ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+
+      #The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,efuse-intr:
+        description:
+          The selection of Internal Resistor (U2/U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 63
+
+      mediatek,efuse-tx-imp:
+        description:
+          The selection of TX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,efuse-rx-imp:
+        description:
+          The selection of RX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    u3phy: xs-phy@11c40000 {
+        compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
+        reg = <0x11c43000 0x0200>;
+        mediatek,src-ref-clk-mhz = <26>;
+        mediatek,src-coef = <17>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11c40000 {
+            reg = <0x11c40000 0x0400>;
+            clocks = <&clk48m>;
+            clock-names = "ref";
+            mediatek,eye-src = <4>;
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11c43000 {
+            reg = <0x11c43400 0x0500>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            mediatek,efuse-intr = <28>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
deleted file mode 100644
index e7caefa0b9c2..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-MediaTek XS-PHY binding
---------------------------
-
-The XS-PHY controller supports physical layer functionality for USB3.1
-GEN2 controller on MediaTek SoCs.
-
-Required properties (controller (parent) node):
- - compatible	: should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy",
-		  soc-model is the name of SoC, such as mt3611 etc;
-		  when using "mediatek,xsphy" compatible string, you need SoC specific
-		  ones in addition, one of:
-		  - "mediatek,mt3611-xsphy"
-
- - #address-cells, #size-cells : should use the same values as the root node
- - ranges: must be present
-
-Optional properties (controller (parent) node):
- - reg		: offset and length of register shared by multiple U3 ports,
-		  exclude port's private register, if only U2 ports provided,
-		  shouldn't use the property.
- - mediatek,src-ref-clk-mhz	: u32, frequency of reference clock for slew rate
-		  calibrate
- - mediatek,src-coef	: u32, coefficient for slew rate calibrate, depends on
-		  SoC process
-
-Required nodes	: a sub-node is required for each port the controller
-		  provides. Address range information including the usual
-		  'reg' property is used inside these nodes to describe
-		  the controller's topology.
-
-Required properties (port (child) node):
-- reg		: address and length of the register set for the port.
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: must contain
-		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
-			reference clock for SuperSpeedPlus analog phy, sometimes is
-			24M, 25M or 27M, depended on platform.
-- #phy-cells	: should be 1
-		  cell after port phandle is phy type from:
-			- PHY_TYPE_USB2
-			- PHY_TYPE_USB3
-
-The following optional properties are only for debug or HQA test
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- mediatek,eye-src	: u32, the value of slew rate calibrate
-- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- mediatek,efuse-intr	: u32, the selection of Internal Resistor
-
-Optional properties (PHY_TYPE_USB3 port (child) node):
-- mediatek,efuse-intr	: u32, the selection of Internal Resistor
-- mediatek,efuse-tx-imp	: u32, the selection of TX Impedance
-- mediatek,efuse-rx-imp	: u32, the selection of RX Impedance
-
-Banks layout of xsphy
--------------------------------------------------------------
-port        offset    bank
-u2 port0    0x0000    MISC
-            0x0100    FMREG
-            0x0300    U2PHY_COM
-u2 port1    0x1000    MISC
-            0x1100    FMREG
-            0x1300    U2PHY_COM
-u2 port2    0x2000    MISC
-            ...
-u31 common  0x3000    DIG_GLB
-            0x3100    PHYA_GLB
-u31 port0   0x3400    DIG_LN_TOP
-            0x3500    DIG_LN_TX0
-            0x3600    DIG_LN_RX0
-            0x3700    DIG_LN_DAIF
-            0x3800    PHYA_LN
-u31 port1   0x3a00    DIG_LN_TOP
-            0x3b00    DIG_LN_TX0
-            0x3c00    DIG_LN_RX0
-            0x3d00    DIG_LN_DAIF
-            0x3e00    PHYA_LN
-            ...
-
-DIG_GLB & PHYA_GLB are shared by U31 ports.
-
-Example:
-
-u3phy: usb-phy@11c40000 {
-	compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
-	reg = <0 0x11c43000 0 0x0200>;
-	mediatek,src-ref-clk-mhz = <26>;
-	mediatek,src-coef = <17>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	u2port0: usb-phy@11c40000 {
-		reg = <0 0x11c40000 0 0x0400>;
-		clocks = <&clk48m>;
-		clock-names = "ref";
-		mediatek,eye-src = <4>;
-		#phy-cells = <1>;
-	};
-
-	u3port0: usb-phy@11c43000 {
-		reg = <0 0x11c43400 0 0x0500>;
-		clocks = <&clk26m>;
-		clock-names = "ref";
-		mediatek,efuse-intr = <28>;
-		#phy-cells = <1>;
-	};
-};
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 15+ messages in thread