linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	devicetree@vger.kernel.org,
	Eddie Huang <eddie.huang@mediatek.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	Lee Jones <lee.jones@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	linux-rtc@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Richard Fontana <rfontana@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sean Wang <sean.wang@mediatek.com>,
	srv_heupstream@mediatek.com, Thomas Gleixner <tglx@linutronix.de>
Subject: Applied "regulator: mt6358: Add support for MT6358 regulator" to the regulator tree
Date: Wed, 28 Aug 2019 14:13:12 +0100 (BST)	[thread overview]
Message-ID: <20190828131312.4612A2742B61@ypsilon.sirena.org.uk> (raw)
In-Reply-To: <1566531931-9772-8-git-send-email-hsin-hsiung.wang@mediatek.com>

The patch

   regulator: mt6358: Add support for MT6358 regulator

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From f67ff1bd58f0c102f0194c3888ddbc4a87dd1382 Mon Sep 17 00:00:00 2001
From: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Date: Fri, 23 Aug 2019 11:45:28 +0800
Subject: [PATCH] regulator: mt6358: Add support for MT6358 regulator

The MT6358 is a regulator found on boards based on MediaTek MT8183 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1566531931-9772-8-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6358-regulator.c       | 549 +++++++++++++++++++++
 include/linux/regulator/mt6358-regulator.h |  56 +++
 4 files changed, 615 insertions(+)
 create mode 100644 drivers/regulator/mt6358-regulator.c
 create mode 100644 include/linux/regulator/mt6358-regulator.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2e50423b3c08..d6d8785630b1 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -619,6 +619,15 @@ config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6358
+	tristate "MediaTek MT6358 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6358 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6380
 	tristate "MediaTek MT6380 PMIC"
 	depends on MTK_PMIC_WRAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 922bf975070f..2210ba56f9bd 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
new file mode 100644
index 000000000000..ba42682e06f3
--- /dev/null
+++ b/drivers/regulator/mt6358-regulator.c
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2019 MediaTek Inc.
+
+#include <linux/mfd/mt6358/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6358-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6358_BUCK_MODE_AUTO	0
+#define MT6358_BUCK_MODE_FORCE_PWM	1
+
+/*
+ * MT6358 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ */
+struct mt6358_regulator_info {
+	struct regulator_desc desc;
+	u32 status_reg;
+	u32 qi;
+	const u32 *index_table;
+	unsigned int n_table;
+	u32 vsel_shift;
+	u32 da_vsel_reg;
+	u32 da_vsel_mask;
+	u32 da_vsel_shift;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 modeset_shift;
+};
+
+#define MT6358_BUCK(match, vreg, min, max, step,		\
+	volt_ranges, vosel_mask, _da_vsel_reg, _da_vsel_mask,	\
+	_da_vsel_shift, _modeset_reg, _modeset_shift)		\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,		\
+		.owner = THIS_MODULE,		\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,		\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = MT6358_BUCK_##vreg##_ELR0,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6358_BUCK_##vreg##_CON0,	\
+		.enable_mask = BIT(0),	\
+		.of_map_mode = mt6358_map_mode,	\
+	},	\
+	.status_reg = MT6358_BUCK_##vreg##_DBG1,	\
+	.qi = BIT(0),	\
+	.da_vsel_reg = _da_vsel_reg,	\
+	.da_vsel_mask = _da_vsel_mask,	\
+	.da_vsel_shift = _da_vsel_shift,	\
+	.modeset_reg = _modeset_reg,	\
+	.modeset_mask = BIT(_modeset_shift),	\
+	.modeset_shift = _modeset_shift	\
+}
+
+#define MT6358_LDO(match, vreg, ldo_volt_table,	\
+	ldo_index_table, enreg, enbit, vosel,	\
+	vosel_mask, vosel_shift)	\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_table_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),	\
+		.volt_table = ldo_volt_table,	\
+		.vsel_reg = vosel,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = enreg,	\
+		.enable_mask = BIT(enbit),	\
+	},	\
+	.status_reg = MT6358_LDO_##vreg##_CON1,	\
+	.qi = BIT(15),	\
+	.index_table = ldo_index_table,	\
+	.n_table = ARRAY_SIZE(ldo_index_table),	\
+	.vsel_shift = vosel_shift,	\
+}
+
+#define MT6358_LDO1(match, vreg, min, max, step,	\
+	volt_ranges, _da_vsel_reg, _da_vsel_mask,	\
+	_da_vsel_shift, vosel, vosel_mask)	\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,	\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = vosel,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6358_LDO_##vreg##_CON0,	\
+		.enable_mask = BIT(0),	\
+	},	\
+	.da_vsel_reg = _da_vsel_reg,	\
+	.da_vsel_mask = _da_vsel_mask,	\
+	.da_vsel_shift = _da_vsel_shift,	\
+	.status_reg = MT6358_LDO_##vreg##_DBG1,	\
+	.qi = BIT(0),	\
+}
+
+#define MT6358_REG_FIXED(match, vreg,	\
+	enreg, enbit, volt)	\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_fixed_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = 1,	\
+		.enable_reg = enreg,	\
+		.enable_mask = BIT(enbit),	\
+		.min_uV = volt,	\
+	},	\
+	.status_reg = MT6358_LDO_##vreg##_CON1,	\
+	.qi = BIT(15),							\
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const struct regulator_linear_range buck_volt_range4[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
+};
+
+static const u32 vdram2_voltages[] = {
+	600000, 1800000,
+};
+
+static const u32 vsim_voltages[] = {
+	1700000, 1800000, 2700000, 3000000, 3100000,
+};
+
+static const u32 vibr_voltages[] = {
+	1200000, 1300000, 1500000, 1800000,
+	2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 vusb_voltages[] = {
+	3000000, 3100000,
+};
+
+static const u32 vcamd_voltages[] = {
+	900000, 1000000, 1100000, 1200000,
+	1300000, 1500000, 1800000,
+};
+
+static const u32 vefuse_voltages[] = {
+	1700000, 1800000, 1900000,
+};
+
+static const u32 vmch_vemc_voltages[] = {
+	2900000, 3000000, 3300000,
+};
+
+static const u32 vcama_voltages[] = {
+	1800000, 2500000, 2700000,
+	2800000, 2900000, 3000000,
+};
+
+static const u32 vcn33_bt_wifi_voltages[] = {
+	3300000, 3400000, 3500000,
+};
+
+static const u32 vmc_voltages[] = {
+	1800000, 2900000, 3000000, 3300000,
+};
+
+static const u32 vldo28_voltages[] = {
+	2800000, 3000000,
+};
+
+static const u32 vdram2_idx[] = {
+	0, 12,
+};
+
+static const u32 vsim_idx[] = {
+	3, 4, 8, 11, 12,
+};
+
+static const u32 vibr_idx[] = {
+	0, 1, 2, 4, 5, 9, 11, 13,
+};
+
+static const u32 vusb_idx[] = {
+	3, 4,
+};
+
+static const u32 vcamd_idx[] = {
+	3, 4, 5, 6, 7, 9, 12,
+};
+
+static const u32 vefuse_idx[] = {
+	11, 12, 13,
+};
+
+static const u32 vmch_vemc_idx[] = {
+	2, 3, 5,
+};
+
+static const u32 vcama_idx[] = {
+	0, 7, 9, 10, 11, 12,
+};
+
+static const u32 vcn33_bt_wifi_idx[] = {
+	1, 2, 3,
+};
+
+static const u32 vmc_idx[] = {
+	4, 10, 11, 13,
+};
+
+static const u32 vldo28_idx[] = {
+	1, 3,
+};
+
+static unsigned int mt6358_map_mode(unsigned int mode)
+{
+	return mode == MT6358_BUCK_MODE_AUTO ?
+		REGULATOR_MODE_NORMAL : REGULATOR_MODE_FAST;
+}
+
+static int mt6358_set_voltage_sel(struct regulator_dev *rdev,
+				  unsigned int selector)
+{
+	int idx, ret;
+	const u32 *pvol;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+
+	pvol = info->index_table;
+
+	idx = pvol[selector];
+	ret = regmap_update_bits(rdev->regmap, info->desc.vsel_reg,
+				 info->desc.vsel_mask,
+				 idx << info->vsel_shift);
+
+	return ret;
+}
+
+static int mt6358_get_voltage_sel(struct regulator_dev *rdev)
+{
+	int idx, ret;
+	u32 selector;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+	const u32 *pvol;
+
+	ret = regmap_read(rdev->regmap, info->desc.vsel_reg, &selector);
+	if (ret != 0) {
+		dev_info(&rdev->dev,
+			 "Failed to get mt6358 %s vsel reg: %d\n",
+			 info->desc.name, ret);
+		return ret;
+	}
+
+	selector = (selector & info->desc.vsel_mask) >> info->vsel_shift;
+	pvol = info->index_table;
+	for (idx = 0; idx < info->desc.n_voltages; idx++) {
+		if (pvol[idx] == selector)
+			return idx;
+	}
+
+	return -EINVAL;
+}
+
+static int mt6358_get_buck_voltage_sel(struct regulator_dev *rdev)
+{
+	int ret, regval;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->da_vsel_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6358 Buck %s vsel reg: %d\n",
+			info->desc.name, ret);
+		return ret;
+	}
+
+	ret = (regval >> info->da_vsel_shift) & info->da_vsel_mask;
+
+	return ret;
+}
+
+static int mt6358_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->status_reg, &regval);
+	if (ret != 0) {
+		dev_info(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6358_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = MT6358_BUCK_MODE_FORCE_PWM;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6358_BUCK_MODE_AUTO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(&rdev->dev, "mt6358 buck set_mode %#x, %#x, %#x, %#x\n",
+		info->modeset_reg, info->modeset_mask,
+		info->modeset_shift, val);
+
+	val <<= info->modeset_shift;
+
+	return regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+}
+
+static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, regval;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6358 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+	case MT6358_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	case MT6358_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct regulator_ops mt6358_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = mt6358_get_buck_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+	.set_mode = mt6358_regulator_set_mode,
+	.get_mode = mt6358_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6358_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = mt6358_set_voltage_sel,
+	.get_voltage_sel = mt6358_get_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+};
+
+static const struct regulator_ops mt6358_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+};
+
+/* The array is indexed by id(MT6358_ID_XXX) */
+static struct mt6358_regulator_info mt6358_regulators[] = {
+	MT6358_BUCK("buck_vdram1", VDRAM1, 500000, 2087500, 12500,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VDRAM1_DBG0, 0x7f,
+		    0, MT6358_VDRAM1_ANA_CON0, 8),
+	MT6358_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
+		    0, MT6358_VCORE_VGPU_ANA_CON0, 1),
+	MT6358_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		    buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f, 0,
+		    MT6358_VPA_ANA_CON0, 3),
+	MT6358_BUCK("buck_vproc11", VPROC11, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC11_DBG0, 0x7f,
+		    0, MT6358_VPROC_ANA_CON0, 1),
+	MT6358_BUCK("buck_vproc12", VPROC12, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC12_DBG0, 0x7f,
+		    0, MT6358_VPROC_ANA_CON0, 2),
+	MT6358_BUCK("buck_vgpu", VGPU, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_ELR0, 0x7f, 0,
+		    MT6358_VCORE_VGPU_ANA_CON0, 2),
+	MT6358_BUCK("buck_vs2", VS2, 500000, 2087500, 12500,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f, 0,
+		    MT6358_VS2_ANA_CON0, 8),
+	MT6358_BUCK("buck_vmodem", VMODEM, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f,
+		    0, MT6358_VMODEM_ANA_CON0, 8),
+	MT6358_BUCK("buck_vs1", VS1, 1000000, 2587500, 12500,
+		    buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f, 0,
+		    MT6358_VS1_ANA_CON0, 8),
+	MT6358_REG_FIXED("ldo_vrf12", VRF12,
+			 MT6358_LDO_VRF12_CON0, 0, 1200000),
+	MT6358_REG_FIXED("ldo_vio18", VIO18,
+			 MT6358_LDO_VIO18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vcamio", VCAMIO,
+			 MT6358_LDO_VCAMIO_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vcn18", VCN18, MT6358_LDO_VCN18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
+	MT6358_REG_FIXED("ldo_vaux18", VAUX18,
+			 MT6358_LDO_VAUX18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vbif28", VBIF28,
+			 MT6358_LDO_VBIF28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_vio28", VIO28, MT6358_LDO_VIO28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_va12", VA12, MT6358_LDO_VA12_CON0, 0, 1200000),
+	MT6358_REG_FIXED("ldo_vrf18", VRF18, MT6358_LDO_VRF18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vaud28", VAUD28,
+			 MT6358_LDO_VAUD28_CON0, 0, 2800000),
+	MT6358_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
+		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10, 0),
+	MT6358_LDO("ldo_vsim1", VSIM1, vsim_voltages, vsim_idx,
+		   MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
+		   MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vusb", VUSB, vusb_voltages, vusb_idx,
+		   MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700, 8),
+	MT6358_LDO("ldo_vcamd", VCAMD, vcamd_voltages, vcamd_idx,
+		   MT6358_LDO_VCAMD_CON0, 0, MT6358_VCAMD_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vefuse", VEFUSE, vefuse_voltages, vefuse_idx,
+		   MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vmch", VMCH, vmch_vemc_voltages, vmch_vemc_idx,
+		   MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700, 8),
+	MT6358_LDO("ldo_vcama1", VCAMA1, vcama_voltages, vcama_idx,
+		   MT6358_LDO_VCAMA1_CON0, 0, MT6358_VCAMA1_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vemc", VEMC, vmch_vemc_voltages, vmch_vemc_idx,
+		   MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700, 8),
+	MT6358_LDO("ldo_vcn33_bt", VCN33_BT, vcn33_bt_wifi_voltages,
+		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_0,
+		   0, MT6358_VCN33_ANA_CON0, 0x300, 8),
+	MT6358_LDO("ldo_vcn33_wifi", VCN33_WIFI, vcn33_bt_wifi_voltages,
+		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_1,
+		   0, MT6358_VCN33_ANA_CON0, 0x300, 8),
+	MT6358_LDO("ldo_vcama2", VCAMA2, vcama_voltages, vcama_idx,
+		   MT6358_LDO_VCAMA2_CON0, 0, MT6358_VCAMA2_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vmc", VMC, vmc_voltages, vmc_idx,
+		   MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vldo28", VLDO28, vldo28_voltages, vldo28_idx,
+		   MT6358_LDO_VLDO28_CON0_0, 0,
+		   MT6358_VLDO28_ANA_CON0, 0x300, 8),
+	MT6358_LDO("ldo_vsim2", VSIM2, vsim_voltages, vsim_idx,
+		   MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00, 8),
+	MT6358_LDO1("ldo_vsram_proc11", VSRAM_PROC11, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON0, 0x7f),
+	MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON2, 0x7f),
+	MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON3, 0x7f),
+	MT6358_LDO1("ldo_vsram_proc12", VSRAM_PROC12, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON1, 0x7f),
+};
+
+static int mt6358_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	for (i = 0; i < MT6358_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6358_regulators[i];
+		config.regmap = mt6397->regmap;
+
+		rdev = devm_regulator_register(&pdev->dev,
+					       &mt6358_regulators[i].desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6358_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id mt6358_platform_ids[] = {
+	{"mt6358-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6358_platform_ids);
+
+static struct platform_driver mt6358_regulator_driver = {
+	.driver = {
+		.name = "mt6358-regulator",
+	},
+	.probe = mt6358_regulator_probe,
+	.id_table = mt6358_platform_ids,
+};
+
+module_platform_driver(mt6358_regulator_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6358 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6358-regulator.h b/include/linux/regulator/mt6358-regulator.h
new file mode 100644
index 000000000000..1cc304946d09
--- /dev/null
+++ b/include/linux/regulator/mt6358-regulator.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6358_H
+#define __LINUX_REGULATOR_MT6358_H
+
+enum {
+	MT6358_ID_VDRAM1 = 0,
+	MT6358_ID_VCORE,
+	MT6358_ID_VPA,
+	MT6358_ID_VPROC11,
+	MT6358_ID_VPROC12,
+	MT6358_ID_VGPU,
+	MT6358_ID_VS2,
+	MT6358_ID_VMODEM,
+	MT6358_ID_VS1,
+	MT6358_ID_VDRAM2 = 9,
+	MT6358_ID_VSIM1,
+	MT6358_ID_VIBR,
+	MT6358_ID_VRF12,
+	MT6358_ID_VIO18,
+	MT6358_ID_VUSB,
+	MT6358_ID_VCAMIO,
+	MT6358_ID_VCAMD,
+	MT6358_ID_VCN18,
+	MT6358_ID_VFE28,
+	MT6358_ID_VSRAM_PROC11,
+	MT6358_ID_VCN28,
+	MT6358_ID_VSRAM_OTHERS,
+	MT6358_ID_VSRAM_GPU,
+	MT6358_ID_VXO22,
+	MT6358_ID_VEFUSE,
+	MT6358_ID_VAUX18,
+	MT6358_ID_VMCH,
+	MT6358_ID_VBIF28,
+	MT6358_ID_VSRAM_PROC12,
+	MT6358_ID_VCAMA1,
+	MT6358_ID_VEMC,
+	MT6358_ID_VIO28,
+	MT6358_ID_VA12,
+	MT6358_ID_VRF18,
+	MT6358_ID_VCN33_BT,
+	MT6358_ID_VCN33_WIFI,
+	MT6358_ID_VCAMA2,
+	MT6358_ID_VMC,
+	MT6358_ID_VLDO28,
+	MT6358_ID_VAUD28,
+	MT6358_ID_VSIM2,
+	MT6358_ID_RG_MAX,
+};
+
+#define MT6358_MAX_REGULATOR	MT6358_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6358_H */
-- 
2.20.1

  parent reply	other threads:[~2019-08-28 13:13 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  3:45 [PATCH v5 00/10] Add Support for MediaTek PMIC MT6358 Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 01/10] mfd: mt6397: clean up code Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 02/10] mfd: mt6397: extract irq related code from core driver Hsin-Hsiung Wang
2019-08-23 12:13   ` [BUG] " Frank Wunderlich
2019-08-23 14:56     ` Matthias Brugger
2019-08-23 15:26       ` Frank Wunderlich
2019-08-23 15:42         ` Matthias Brugger
     [not found]           ` <b5a21908-faee-17d1-ce26-99b941c0fa70-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-08-23 17:16             ` Aw: " Frank Wunderlich
2019-08-29  6:24               ` Hsin-hsiung Wang
2019-09-19 18:59                 ` Frank Wunderlich
2019-09-30 19:44                 ` Aw: " Frank Wunderlich
2019-08-24  7:04             ` Frank Wunderlich
     [not found]               ` <725410A8-8B5B-472A-8904-57B912475783-SipyoOjXbOMoAHOVJHB0wA@public.gmane.org>
2019-08-24  9:16                 ` Frank Wunderlich
2019-08-23 15:35       ` Frank Wunderlich
2019-08-23 15:53       ` Frank Wunderlich
2019-08-23 14:53   ` Matthias Brugger
2019-08-23  3:45 ` [PATCH v5 03/10] mfd: mt6397: modify suspend/resume behavior Hsin-Hsiung Wang
2019-08-23 15:12   ` Matthias Brugger
2019-08-23  3:45 ` [PATCH v5 04/10] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 05/10] regulator: Add document for MT6358 regulator Hsin-Hsiung Wang
2019-08-28 10:44   ` Mark Brown
2019-08-28 13:13   ` Applied "regulator: Add document for MT6358 regulator" to the regulator tree Mark Brown
2019-08-23  3:45 ` [PATCH v5 06/10] mfd: Add support for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-12-02  8:06   ` Pi-Hsun Shih
2019-12-06  8:55     ` Hsin-hsiung Wang
2019-08-23  3:45 ` [PATCH v5 07/10] regulator: mt6358: Add support for MT6358 regulator Hsin-Hsiung Wang
2019-08-28 10:45   ` Mark Brown
2019-08-29  6:09     ` Hsin-hsiung Wang
2019-08-28 13:13   ` Mark Brown [this message]
2019-08-23  3:45 ` [PATCH v5 08/10] arm64: dts: mt6358: add PMIC MT6358 related nodes Hsin-Hsiung Wang
2019-08-23  3:45 ` [PATCH v5 09/10] rtc: mt6397: fix alarm register overwrite Hsin-Hsiung Wang
2019-08-23 15:35   ` Matthias Brugger
2019-08-29  5:34     ` Hsin-hsiung Wang
     [not found] ` <1566531931-9772-1-git-send-email-hsin-hsiung.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-08-23  3:45   ` [PATCH v5 10/10] rtc: mt6397: Add support for the MediaTek MT6358 RTC Hsin-Hsiung Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190828131312.4612A2742B61@ypsilon.sirena.org.uk \
    --to=broonie@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.huang@mediatek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hsin-hsiung.wang@mediatek.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=rfontana@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).