[PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Matti Vaittinen]

Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0.

Main benefit is to make it easier to see which values mean IN and which
OUT. As a side effect this helps GPIO framework to change the direction
defines to something else if ever needed.

Please note that return value from get_direction call on
pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have
returned value 2 for direction INPUT.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c         |  5 ++++-
 drivers/pinctrl/bcm/pinctrl-iproc-gpio.c      |  5 ++++-
 drivers/pinctrl/mediatek/pinctrl-mtk-common.c |  5 ++++-
 drivers/pinctrl/mediatek/pinctrl-paris.c      |  5 ++++-
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c   |  5 ++++-
 drivers/pinctrl/nomadik/pinctrl-nomadik.c     |  7 +++++--
 drivers/pinctrl/pinctrl-amd.c                 |  5 ++++-
 drivers/pinctrl/pinctrl-at91.c                |  5 ++++-
 drivers/pinctrl/pinctrl-axp209.c              |  7 +++++--
 drivers/pinctrl/pinctrl-ingenic.c             | 14 ++++++++++----
 drivers/pinctrl/pinctrl-ocelot.c              |  5 ++++-
 drivers/pinctrl/pinctrl-oxnas.c               |  5 ++++-
 drivers/pinctrl/pinctrl-pic32.c               |  5 ++++-
 drivers/pinctrl/pinctrl-pistachio.c           |  5 ++++-
 drivers/pinctrl/pinctrl-rk805.c               |  7 +++++--
 drivers/pinctrl/pinctrl-rockchip.c            |  5 ++++-
 drivers/pinctrl/pinctrl-rza1.c                |  5 ++++-
 drivers/pinctrl/pinctrl-rza2.c                |  6 +++---
 drivers/pinctrl/pinctrl-st.c                  | 14 +++++++++++---
 drivers/pinctrl/pinctrl-stmfx.c               | 17 ++++++++++++++---
 drivers/pinctrl/pinctrl-sx150x.c              |  9 ++++++---
 drivers/pinctrl/qcom/pinctrl-msm.c            |  4 ++--
 drivers/pinctrl/stm32/pinctrl-stm32.c         |  4 ++--
 drivers/pinctrl/vt8500/pinctrl-wmt.c          |  6 ++++--
 24 files changed, 119 insertions(+), 41 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 0de1a3a96984..d3294964bb4e 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -322,7 +322,10 @@ static int bcm2835_gpio_get_direction(struct gpio_chip *chip, unsigned int offse
 	if (fsel > BCM2835_FSEL_GPIO_OUT)
 		return -EINVAL;
 
-	return (fsel == BCM2835_FSEL_GPIO_IN);
+	if (fsel == BCM2835_FSEL_GPIO_IN)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index 42f7ab383ad9..3a0a9735ebd4 100644
--- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -357,7 +357,10 @@ static int iproc_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
 	unsigned int offset = IPROC_GPIO_REG(gpio, IPROC_GPIO_OUT_EN_OFFSET);
 	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 
-	return !(readl(chip->base + offset) & BIT(shift));
+	if (readl(chip->base + offset) & BIT(shift))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 53f52b9a0acd..4c11217e7d25 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -804,7 +804,10 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 		pctl->devdata->spec_dir_set(&reg_addr, offset);
 
 	regmap_read(pctl->regmap1, reg_addr, &read_val);
-	return !(read_val & bit);
+	if (read_val & bit)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int mtk_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 923264d0e9ef..d70bb3aec2c9 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -699,7 +699,10 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
 	if (err)
 		return err;
 
-	return !value;
+	if (value)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index f2f5fcd9a237..73e41515d978 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -403,7 +403,10 @@ static int armada_37xx_gpio_get_direction(struct gpio_chip *chip,
 	mask = BIT(offset);
 	regmap_read(info->regmap, reg, &val);
 
-	return !(val & mask);
+	if (val & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int armada_37xx_gpio_direction_output(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 2a8190b11d10..21f0e044ef2d 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -850,11 +850,14 @@ static int nmk_gpio_get_dir(struct gpio_chip *chip, unsigned offset)
 
 	clk_enable(nmk_chip->clk);
 
-	dir = !(readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset));
+	dir = readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset);
 
 	clk_disable(nmk_chip->clk);
 
-	return dir;
+	if (dir)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 2c61141519f8..9331a6b84acd 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -46,7 +46,10 @@ static int amd_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
 	pin_reg = readl(gpio_dev->base + offset * 4);
 	raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
 
-	return !(pin_reg & BIT(OUTPUT_ENABLE_OFF));
+	if (pin_reg & BIT(OUTPUT_ENABLE_OFF))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index d6e7e9f0ddec..a3444c638337 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1414,7 +1414,10 @@ static int at91_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	u32 osr;
 
 	osr = readl_relaxed(pio + PIO_OSR);
-	return !(osr & mask);
+	if (osr & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
index be5b645815e5..207cbae3a7bf 100644
--- a/drivers/pinctrl/pinctrl-axp209.c
+++ b/drivers/pinctrl/pinctrl-axp209.c
@@ -149,13 +149,16 @@ static int axp20x_gpio_get_direction(struct gpio_chip *chip,
 	 * going to change the value soon anyway. Default to output.
 	 */
 	if ((val & AXP20X_GPIO_FUNCTIONS) > 2)
-		return 0;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	/*
 	 * The GPIO directions are the three lowest values.
 	 * 2 is input, 0 and 1 are output
 	 */
-	return val & 2;
+	if (val & 2)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int axp20x_gpio_output(struct gpio_chip *chip, unsigned int offset,
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 6e2683016c1f..faee2f33792b 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1643,13 +1643,19 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 	struct ingenic_pinctrl *jzpc = jzgc->jzpc;
 	unsigned int pin = gc->base + offset;
 
-	if (jzpc->version >= ID_JZ4760)
-		return ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1);
+	if (jzpc->version >= ID_JZ4760) {
+		if (ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1))
+			return GPIO_LINE_DIRECTION_IN;
+		return GPIO_LINE_DIRECTION_OUT;
+	}
 
 	if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_SELECT))
-		return true;
+		return GPIO_LINE_DIRECTION_IN;
+
+	if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_DIR))
+		return GPIO_LINE_DIRECTION_OUT;
 
-	return !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_DIR);
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static const struct pinctrl_ops ingenic_pctlops = {
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index fb76fb2e9ea5..c3ae4b070c3d 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -604,7 +604,10 @@ static int ocelot_gpio_get_direction(struct gpio_chip *chip,
 
 	regmap_read(info->map, REG(OCELOT_GPIO_OE, info, offset), &val);
 
-	return !(val & BIT(offset % 32));
+	if (val & BIT(offset % 32))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int ocelot_gpio_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-oxnas.c b/drivers/pinctrl/pinctrl-oxnas.c
index 55488ca246f1..7d6d17b94ab9 100644
--- a/drivers/pinctrl/pinctrl-oxnas.c
+++ b/drivers/pinctrl/pinctrl-oxnas.c
@@ -756,7 +756,10 @@ static int oxnas_gpio_get_direction(struct gpio_chip *chip,
 	struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
 	u32 mask = BIT(offset);
 
-	return !(readl_relaxed(bank->reg_base + OUTPUT_EN) & mask);
+	if (readl_relaxed(bank->reg_base + OUTPUT_EN) & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int oxnas_gpio_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-pic32.c b/drivers/pinctrl/pinctrl-pic32.c
index e7f6dd5ab578..dd65178fbda2 100644
--- a/drivers/pinctrl/pinctrl-pic32.c
+++ b/drivers/pinctrl/pinctrl-pic32.c
@@ -1990,7 +1990,10 @@ static int pic32_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	struct pic32_gpio_bank *bank = gpiochip_get_data(chip);
 
-	return !!(readl(bank->reg_base + TRIS_REG) & BIT(offset));
+	if (readl(bank->reg_base + TRIS_REG) & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static void pic32_gpio_irq_ack(struct irq_data *data)
diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
index 379e9a6a6d89..c33375f5c5ff 100644
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -1166,7 +1166,10 @@ static int pistachio_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	struct pistachio_gpio_bank *bank = gpiochip_get_data(chip);
 
-	return !(gpio_readl(bank, GPIO_OUTPUT_EN) & BIT(offset));
+	if (gpio_readl(bank, GPIO_OUTPUT_EN) & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int pistachio_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/pinctrl-rk805.c b/drivers/pinctrl/pinctrl-rk805.c
index 26adbe9d6d42..cccbe072274e 100644
--- a/drivers/pinctrl/pinctrl-rk805.c
+++ b/drivers/pinctrl/pinctrl-rk805.c
@@ -184,7 +184,7 @@ static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 	/* default output*/
 	if (!pci->pin_cfg[offset].dir_msk)
-		return 0;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	ret = regmap_read(pci->rk808->regmap,
 			  pci->pin_cfg[offset].reg,
@@ -194,7 +194,10 @@ static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 		return ret;
 	}
 
-	return !(val & pci->pin_cfg[offset].dir_msk);
+	if (val & pci->pin_cfg[offset].dir_msk)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static const struct gpio_chip rk805_gpio_chip = {
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index dc0bbf198cbc..cf5181ad817e 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -2211,7 +2211,10 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	clk_disable(bank->clk);
 
-	return !(data & BIT(offset));
+	if (data & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 /*
diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c
index 215db220d795..002bd7346562 100644
--- a/drivers/pinctrl/pinctrl-rza1.c
+++ b/drivers/pinctrl/pinctrl-rza1.c
@@ -777,7 +777,10 @@ static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
 {
 	struct rza1_port *port = gpiochip_get_data(chip);
 
-	return !!rza1_get_bit(port, RZA1_PM_REG, gpio);
+	if (rza1_get_bit(port, RZA1_PM_REG, gpio))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int rza1_gpio_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-rza2.c b/drivers/pinctrl/pinctrl-rza2.c
index 3be1d833bf25..0fca1fbc9480 100644
--- a/drivers/pinctrl/pinctrl-rza2.c
+++ b/drivers/pinctrl/pinctrl-rza2.c
@@ -135,10 +135,10 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
 	reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK;
 
 	if (reg16 == RZA2_PDR_OUTPUT)
-		return 0;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	if (reg16 == RZA2_PDR_INPUT)
-		return 1;
+		return GPIO_LINE_DIRECTION_IN;
 
 	/*
 	 * This GPIO controller has a default Hi-Z state that is not input or
@@ -146,7 +146,7 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
 	 */
 	rza2_pin_to_gpio(priv->base, offset, 1);
 
-	return 1;
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int rza2_chip_direction_input(struct gpio_chip *chip,
diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index 00db8b9efb2c..aff589ce446f 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -746,7 +746,10 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	function = st_pctl_get_pin_function(&pc, offset);
 	if (function) {
 		st_pinconf_get_direction(&pc, offset, &config);
-		return !ST_PINCONF_UNPACK_OE(config);
+		if (ST_PINCONF_UNPACK_OE(config))
+			return GPIO_LINE_DIRECTION_OUT;
+
+		return GPIO_LINE_DIRECTION_IN;
 	}
 
 	/*
@@ -758,7 +761,10 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 		direction |= ((value >> offset) & 0x1) << i;
 	}
 
-	return (direction == ST_GPIO_DIRECTION_IN);
+	if (direction == ST_GPIO_DIRECTION_IN)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 /* Pinctrl Groups */
@@ -996,6 +1002,7 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 	unsigned int function;
 	int offset = st_gpio_pin(pin_id);
 	char f[16];
+	int oe;
 
 	mutex_unlock(&pctldev->mutex);
 	pc = st_get_pio_control(pctldev, pin_id);
@@ -1008,10 +1015,11 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 	else
 		snprintf(f, 5, "GPIO");
 
+	oe = st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset);
 	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
 		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
 		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
-		!st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset),
+		(oe == GPIO_LINE_DIRECTION_OUT),
 		ST_PINCONF_UNPACK_PU(config),
 		ST_PINCONF_UNPACK_OD(config),
 		f,
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index 564660028fcc..132a0f217692 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -134,10 +134,14 @@ static int stmfx_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 	ret = regmap_read(pctl->stmfx->map, reg, &val);
 	/*
 	 * On stmfx, gpio pins direction is (0)input, (1)output.
-	 * .get_direction returns 0=out, 1=in
 	 */
+	if (ret)
+		return ret;
 
-	return ret ? ret : !(val & mask);
+	if (val & mask)
+		return GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int stmfx_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
@@ -223,6 +227,13 @@ static int stmfx_pinconf_get(struct pinctrl_dev *pctldev,
 	dir = stmfx_gpio_get_direction(&pctl->gpio_chip, pin);
 	if (dir < 0)
 		return dir;
+
+	/*
+	 * Currently the gpiolib IN is 1 and OUT is 0 but let's not count
+	 * on it just to be on the safe side also in the future :)
+	 */
+	dir = (dir == GPIO_LINE_DIRECTION_IN) ? 1 : 0;
+
 	type = stmfx_pinconf_get_type(pctl, pin);
 	if (type < 0)
 		return type;
@@ -360,7 +371,7 @@ static void stmfx_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 	if (val < 0)
 		return;
 
-	if (!dir) {
+	if (dir == GPIO_LINE_DIRECTION_OUT) {
 		seq_printf(s, "output %s ", val ? "high" : "low");
 		if (type)
 			seq_printf(s, "open drain %s internal pull-up ",
diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
index 566665931a04..6e74bd87d959 100644
--- a/drivers/pinctrl/pinctrl-sx150x.c
+++ b/drivers/pinctrl/pinctrl-sx150x.c
@@ -391,13 +391,16 @@ static int sx150x_gpio_get_direction(struct gpio_chip *chip,
 	int ret;
 
 	if (sx150x_pin_is_oscio(pctl, offset))
-		return false;
+		return GPIO_LINE_DIRECTION_OUT;
 
 	ret = regmap_read(pctl->regmap, pctl->data->reg_dir, &value);
 	if (ret < 0)
 		return ret;
 
-	return !!(value & BIT(offset));
+	if (value & BIT(offset))
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
 }
 
 static int sx150x_gpio_get(struct gpio_chip *chip, unsigned int offset)
@@ -687,7 +690,7 @@ static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
 		if (ret < 0)
 			return ret;
 
-		if (ret)
+		if (ret == GPIO_LINE_DIRECTION_IN)
 			return -EINVAL;
 
 		ret = sx150x_gpio_get(&pctl->gpio, pin);
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 763da0be10d6..8844ca1261d5 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -485,8 +485,8 @@ static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 	val = msm_readl_ctl(pctrl, g);
 
-	/* 0 = output, 1 = input */
-	return val & BIT(g->oe_bit) ? 0 : 1;
+	return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
+				      GPIO_LINE_DIRECTION_IN;
 }
 
 static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 2d5e0435af0a..72e0669ca7c8 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -283,9 +283,9 @@ static int stm32_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 	stm32_pmx_get_mode(bank, pin, &mode, &alt);
 	if ((alt == 0) && (mode == 0))
-		ret = 1;
+		ret = GPIO_LINE_DIRECTION_IN;
 	else if ((alt == 0) && (mode == 1))
-		ret = 0;
+		ret = GPIO_LINE_DIRECTION_OUT;
 	else
 		ret = -EINVAL;
 
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
index 4d5cd7d8c760..7f2aceba295a 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -486,8 +486,10 @@ static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	u32 val;
 
 	val = readl_relaxed(data->base + reg_dir);
-	/* Return 0 == output, 1 == input */
-	return !(val & BIT(bit));
+	if (val & BIT(bit))
+		GPIO_LINE_DIRECTION_OUT;
+
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Bjorn Andersson]

On Tue 12 Nov 06:18 PST 2019, Matti Vaittinen wrote:
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 763da0be10d6..8844ca1261d5 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -485,8 +485,8 @@ static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
>  
>  	val = msm_readl_ctl(pctrl, g);
>  
> -	/* 0 = output, 1 = input */
> -	return val & BIT(g->oe_bit) ? 0 : 1;
> +	return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
> +				      GPIO_LINE_DIRECTION_IN;
>  }
>  

For pinctrl-msm

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Geert Uytterhoeven]

On Tue, Nov 12, 2019 at 3:18 PM Matti Vaittinen
<matti.vaittinen@fi.rohmeurope.com> wrote:
> Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and
> GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0.
>
> Main benefit is to make it easier to see which values mean IN and which
> OUT. As a side effect this helps GPIO framework to change the direction
> defines to something else if ever needed.
>
> Please note that return value from get_direction call on
> pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have
> returned value 2 for direction INPUT.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

For:

>  drivers/pinctrl/pinctrl-rza1.c                |  5 ++++-
>  drivers/pinctrl/pinctrl-rza2.c                |  6 +++---

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 2022 bytes --]

Hi Matti,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on 70d97e099bb426ecb3ad4bf31e88dbf2ef4b2e4c]

url:    https://github.com/0day-ci/linux/commits/Matti-Vaittinen/pinctrl-rza1-remove-unnecerssary-static-inline-function/20191113-114104
base:    70d97e099bb426ecb3ad4bf31e88dbf2ef4b2e4c
config: arm-allmodconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 7.4.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.4.0 make.cross ARCH=arm 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   In file included from drivers/pinctrl/vt8500/pinctrl-wmt.c:9:0:
   drivers/pinctrl/vt8500/pinctrl-wmt.c: In function 'wmt_gpio_get_direction':
   include/linux/gpio/driver.h:26:33: warning: statement with no effect [-Wunused-value]
    #define GPIO_LINE_DIRECTION_OUT 0
                                    ^
>> drivers/pinctrl/vt8500/pinctrl-wmt.c:490:3: note: in expansion of macro 'GPIO_LINE_DIRECTION_OUT'
      GPIO_LINE_DIRECTION_OUT;
      ^~~~~~~~~~~~~~~~~~~~~~~

vim +/GPIO_LINE_DIRECTION_OUT +490 drivers/pinctrl/vt8500/pinctrl-wmt.c

   479	
   480	static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
   481	{
   482		struct wmt_pinctrl_data *data = gpiochip_get_data(chip);
   483		u32 bank = WMT_BANK_FROM_PIN(offset);
   484		u32 bit = WMT_BIT_FROM_PIN(offset);
   485		u32 reg_dir = data->banks[bank].reg_dir;
   486		u32 val;
   487	
   488		val = readl_relaxed(data->base + reg_dir);
   489		if (val & BIT(bit))
 > 490			GPIO_LINE_DIRECTION_OUT;
   491	
   492		return GPIO_LINE_DIRECTION_IN;
   493	}
   494	

---
0-DAY kernel test infrastructure                 Open Source Technology Center
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 71989 bytes --]

[-- Attachment #3: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Vaittinen, Matti]

On Wed, 2019-11-13 at 14:30 +0800, kbuild test robot wrote:
> Hi Matti,
> 
> Thank you for the patch! Perhaps something to improve:
> 
> [auto build test WARNING on 70d97e099bb426ecb3ad4bf31e88dbf2ef4b2e4c]
> 

>    480	static int wmt_gpio_get_direction(struct gpio_chip
> *chip, unsigned offset)
>    481	{
>    482		struct wmt_pinctrl_data *data =
> gpiochip_get_data(chip);
>    483		u32 bank = WMT_BANK_FROM_PIN(offset);
>    484		u32 bit = WMT_BIT_FROM_PIN(offset);
>    485		u32 reg_dir = data->banks[bank].reg_dir;
>    486		u32 val;
>    487	
>    488		val = readl_relaxed(data->base + reg_dir);
>    489		if (val & BIT(bit))
>  > 490			GPIO_LINE_DIRECTION_OUT;

Right. Return is missing. I think I already fixed this - I guess I sent
wrong version... Sorry guys. I'll do v3 with only this return added -
and I'll send it to limited amount of recipients as I think most of you
guys may not be interested. Probably to Linus W, Geert and GPIO list
only. Let me know if you want to see the v3 (or other subsequent
patches)

>    491	
>    492		return GPIO_LINE_DIRECTION_IN;
>    493	}
>    494	
> 
> ---
> 0-DAY kernel test infrastructure                 Open Source
> Technology Center
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org Intel
> Corporation

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Jacopo Mondi]

[-- Attachment #1.1: Type: text/plain, Size: 21078 bytes --]

Hi Matti,

On Tue, Nov 12, 2019 at 04:18:19PM +0200, Matti Vaittinen wrote:
> Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and
> GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0.
>
> Main benefit is to make it easier to see which values mean IN and which
> OUT. As a side effect this helps GPIO framework to change the direction
> defines to something else if ever needed.
>
> Please note that return value from get_direction call on
> pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have
> returned value 2 for direction INPUT.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
>  drivers/pinctrl/bcm/pinctrl-bcm2835.c         |  5 ++++-
>  drivers/pinctrl/bcm/pinctrl-iproc-gpio.c      |  5 ++++-
>  drivers/pinctrl/mediatek/pinctrl-mtk-common.c |  5 ++++-
>  drivers/pinctrl/mediatek/pinctrl-paris.c      |  5 ++++-
>  drivers/pinctrl/mvebu/pinctrl-armada-37xx.c   |  5 ++++-
>  drivers/pinctrl/nomadik/pinctrl-nomadik.c     |  7 +++++--
>  drivers/pinctrl/pinctrl-amd.c                 |  5 ++++-
>  drivers/pinctrl/pinctrl-at91.c                |  5 ++++-
>  drivers/pinctrl/pinctrl-axp209.c              |  7 +++++--
>  drivers/pinctrl/pinctrl-ingenic.c             | 14 ++++++++++----
>  drivers/pinctrl/pinctrl-ocelot.c              |  5 ++++-
>  drivers/pinctrl/pinctrl-oxnas.c               |  5 ++++-
>  drivers/pinctrl/pinctrl-pic32.c               |  5 ++++-
>  drivers/pinctrl/pinctrl-pistachio.c           |  5 ++++-
>  drivers/pinctrl/pinctrl-rk805.c               |  7 +++++--
>  drivers/pinctrl/pinctrl-rockchip.c            |  5 ++++-
>  drivers/pinctrl/pinctrl-rza1.c                |  5 ++++-
>  drivers/pinctrl/pinctrl-rza2.c                |  6 +++---

For RZ/A1 RZ/A2:
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks
   j

>  drivers/pinctrl/pinctrl-st.c                  | 14 +++++++++++---
>  drivers/pinctrl/pinctrl-stmfx.c               | 17 ++++++++++++++---
>  drivers/pinctrl/pinctrl-sx150x.c              |  9 ++++++---
>  drivers/pinctrl/qcom/pinctrl-msm.c            |  4 ++--
>  drivers/pinctrl/stm32/pinctrl-stm32.c         |  4 ++--
>  drivers/pinctrl/vt8500/pinctrl-wmt.c          |  6 ++++--
>  24 files changed, 119 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
> index 0de1a3a96984..d3294964bb4e 100644
> --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
> +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
> @@ -322,7 +322,10 @@ static int bcm2835_gpio_get_direction(struct gpio_chip *chip, unsigned int offse
>  	if (fsel > BCM2835_FSEL_GPIO_OUT)
>  		return -EINVAL;
>
> -	return (fsel == BCM2835_FSEL_GPIO_IN);
> +	if (fsel == BCM2835_FSEL_GPIO_IN)
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
>  }
>
>  static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
> index 42f7ab383ad9..3a0a9735ebd4 100644
> --- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
> +++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
> @@ -357,7 +357,10 @@ static int iproc_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
>  	unsigned int offset = IPROC_GPIO_REG(gpio, IPROC_GPIO_OUT_EN_OFFSET);
>  	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
>
> -	return !(readl(chip->base + offset) & BIT(shift));
> +	if (readl(chip->base + offset) & BIT(shift))
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> index 53f52b9a0acd..4c11217e7d25 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> @@ -804,7 +804,10 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  		pctl->devdata->spec_dir_set(&reg_addr, offset);
>
>  	regmap_read(pctl->regmap1, reg_addr, &read_val);
> -	return !(read_val & bit);
> +	if (read_val & bit)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int mtk_gpio_get(struct gpio_chip *chip, unsigned offset)
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index 923264d0e9ef..d70bb3aec2c9 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -699,7 +699,10 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
>  	if (err)
>  		return err;
>
> -	return !value;
> +	if (value)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> index f2f5fcd9a237..73e41515d978 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> @@ -403,7 +403,10 @@ static int armada_37xx_gpio_get_direction(struct gpio_chip *chip,
>  	mask = BIT(offset);
>  	regmap_read(info->regmap, reg, &val);
>
> -	return !(val & mask);
> +	if (val & mask)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int armada_37xx_gpio_direction_output(struct gpio_chip *chip,
> diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
> index 2a8190b11d10..21f0e044ef2d 100644
> --- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
> +++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
> @@ -850,11 +850,14 @@ static int nmk_gpio_get_dir(struct gpio_chip *chip, unsigned offset)
>
>  	clk_enable(nmk_chip->clk);
>
> -	dir = !(readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset));
> +	dir = readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset);
>
>  	clk_disable(nmk_chip->clk);
>
> -	return dir;
> +	if (dir)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
> diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
> index 2c61141519f8..9331a6b84acd 100644
> --- a/drivers/pinctrl/pinctrl-amd.c
> +++ b/drivers/pinctrl/pinctrl-amd.c
> @@ -46,7 +46,10 @@ static int amd_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
>  	pin_reg = readl(gpio_dev->base + offset * 4);
>  	raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
>
> -	return !(pin_reg & BIT(OUTPUT_ENABLE_OFF));
> +	if (pin_reg & BIT(OUTPUT_ENABLE_OFF))
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index d6e7e9f0ddec..a3444c638337 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -1414,7 +1414,10 @@ static int at91_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  	u32 osr;
>
>  	osr = readl_relaxed(pio + PIO_OSR);
> -	return !(osr & mask);
> +	if (osr & mask)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
> index be5b645815e5..207cbae3a7bf 100644
> --- a/drivers/pinctrl/pinctrl-axp209.c
> +++ b/drivers/pinctrl/pinctrl-axp209.c
> @@ -149,13 +149,16 @@ static int axp20x_gpio_get_direction(struct gpio_chip *chip,
>  	 * going to change the value soon anyway. Default to output.
>  	 */
>  	if ((val & AXP20X_GPIO_FUNCTIONS) > 2)
> -		return 0;
> +		return GPIO_LINE_DIRECTION_OUT;
>
>  	/*
>  	 * The GPIO directions are the three lowest values.
>  	 * 2 is input, 0 and 1 are output
>  	 */
> -	return val & 2;
> +	if (val & 2)
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
>  }
>
>  static int axp20x_gpio_output(struct gpio_chip *chip, unsigned int offset,
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
> index 6e2683016c1f..faee2f33792b 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -1643,13 +1643,19 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
>  	struct ingenic_pinctrl *jzpc = jzgc->jzpc;
>  	unsigned int pin = gc->base + offset;
>
> -	if (jzpc->version >= ID_JZ4760)
> -		return ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1);
> +	if (jzpc->version >= ID_JZ4760) {
> +		if (ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1))
> +			return GPIO_LINE_DIRECTION_IN;
> +		return GPIO_LINE_DIRECTION_OUT;
> +	}
>
>  	if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_SELECT))
> -		return true;
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_DIR))
> +		return GPIO_LINE_DIRECTION_OUT;
>
> -	return !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_DIR);
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static const struct pinctrl_ops ingenic_pctlops = {
> diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
> index fb76fb2e9ea5..c3ae4b070c3d 100644
> --- a/drivers/pinctrl/pinctrl-ocelot.c
> +++ b/drivers/pinctrl/pinctrl-ocelot.c
> @@ -604,7 +604,10 @@ static int ocelot_gpio_get_direction(struct gpio_chip *chip,
>
>  	regmap_read(info->map, REG(OCELOT_GPIO_OE, info, offset), &val);
>
> -	return !(val & BIT(offset % 32));
> +	if (val & BIT(offset % 32))
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int ocelot_gpio_direction_input(struct gpio_chip *chip,
> diff --git a/drivers/pinctrl/pinctrl-oxnas.c b/drivers/pinctrl/pinctrl-oxnas.c
> index 55488ca246f1..7d6d17b94ab9 100644
> --- a/drivers/pinctrl/pinctrl-oxnas.c
> +++ b/drivers/pinctrl/pinctrl-oxnas.c
> @@ -756,7 +756,10 @@ static int oxnas_gpio_get_direction(struct gpio_chip *chip,
>  	struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
>  	u32 mask = BIT(offset);
>
> -	return !(readl_relaxed(bank->reg_base + OUTPUT_EN) & mask);
> +	if (readl_relaxed(bank->reg_base + OUTPUT_EN) & mask)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int oxnas_gpio_direction_input(struct gpio_chip *chip,
> diff --git a/drivers/pinctrl/pinctrl-pic32.c b/drivers/pinctrl/pinctrl-pic32.c
> index e7f6dd5ab578..dd65178fbda2 100644
> --- a/drivers/pinctrl/pinctrl-pic32.c
> +++ b/drivers/pinctrl/pinctrl-pic32.c
> @@ -1990,7 +1990,10 @@ static int pic32_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  {
>  	struct pic32_gpio_bank *bank = gpiochip_get_data(chip);
>
> -	return !!(readl(bank->reg_base + TRIS_REG) & BIT(offset));
> +	if (readl(bank->reg_base + TRIS_REG) & BIT(offset))
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
>  }
>
>  static void pic32_gpio_irq_ack(struct irq_data *data)
> diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
> index 379e9a6a6d89..c33375f5c5ff 100644
> --- a/drivers/pinctrl/pinctrl-pistachio.c
> +++ b/drivers/pinctrl/pinctrl-pistachio.c
> @@ -1166,7 +1166,10 @@ static int pistachio_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  {
>  	struct pistachio_gpio_bank *bank = gpiochip_get_data(chip);
>
> -	return !(gpio_readl(bank, GPIO_OUTPUT_EN) & BIT(offset));
> +	if (gpio_readl(bank, GPIO_OUTPUT_EN) & BIT(offset))
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int pistachio_gpio_get(struct gpio_chip *chip, unsigned offset)
> diff --git a/drivers/pinctrl/pinctrl-rk805.c b/drivers/pinctrl/pinctrl-rk805.c
> index 26adbe9d6d42..cccbe072274e 100644
> --- a/drivers/pinctrl/pinctrl-rk805.c
> +++ b/drivers/pinctrl/pinctrl-rk805.c
> @@ -184,7 +184,7 @@ static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
>
>  	/* default output*/
>  	if (!pci->pin_cfg[offset].dir_msk)
> -		return 0;
> +		return GPIO_LINE_DIRECTION_OUT;
>
>  	ret = regmap_read(pci->rk808->regmap,
>  			  pci->pin_cfg[offset].reg,
> @@ -194,7 +194,10 @@ static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
>  		return ret;
>  	}
>
> -	return !(val & pci->pin_cfg[offset].dir_msk);
> +	if (val & pci->pin_cfg[offset].dir_msk)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static const struct gpio_chip rk805_gpio_chip = {
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index dc0bbf198cbc..cf5181ad817e 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -2211,7 +2211,10 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
>  	clk_disable(bank->clk);
>
> -	return !(data & BIT(offset));
> +	if (data & BIT(offset))
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  /*
> diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c
> index 215db220d795..002bd7346562 100644
> --- a/drivers/pinctrl/pinctrl-rza1.c
> +++ b/drivers/pinctrl/pinctrl-rza1.c
> @@ -777,7 +777,10 @@ static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
>  {
>  	struct rza1_port *port = gpiochip_get_data(chip);
>
> -	return !!rza1_get_bit(port, RZA1_PM_REG, gpio);
> +	if (rza1_get_bit(port, RZA1_PM_REG, gpio))
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
>  }
>
>  static int rza1_gpio_direction_input(struct gpio_chip *chip,
> diff --git a/drivers/pinctrl/pinctrl-rza2.c b/drivers/pinctrl/pinctrl-rza2.c
> index 3be1d833bf25..0fca1fbc9480 100644
> --- a/drivers/pinctrl/pinctrl-rza2.c
> +++ b/drivers/pinctrl/pinctrl-rza2.c
> @@ -135,10 +135,10 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
>  	reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK;
>
>  	if (reg16 == RZA2_PDR_OUTPUT)
> -		return 0;
> +		return GPIO_LINE_DIRECTION_OUT;
>
>  	if (reg16 == RZA2_PDR_INPUT)
> -		return 1;
> +		return GPIO_LINE_DIRECTION_IN;
>
>  	/*
>  	 * This GPIO controller has a default Hi-Z state that is not input or
> @@ -146,7 +146,7 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
>  	 */
>  	rza2_pin_to_gpio(priv->base, offset, 1);
>
> -	return 1;
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int rza2_chip_direction_input(struct gpio_chip *chip,
> diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
> index 00db8b9efb2c..aff589ce446f 100644
> --- a/drivers/pinctrl/pinctrl-st.c
> +++ b/drivers/pinctrl/pinctrl-st.c
> @@ -746,7 +746,10 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  	function = st_pctl_get_pin_function(&pc, offset);
>  	if (function) {
>  		st_pinconf_get_direction(&pc, offset, &config);
> -		return !ST_PINCONF_UNPACK_OE(config);
> +		if (ST_PINCONF_UNPACK_OE(config))
> +			return GPIO_LINE_DIRECTION_OUT;
> +
> +		return GPIO_LINE_DIRECTION_IN;
>  	}
>
>  	/*
> @@ -758,7 +761,10 @@ static int st_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  		direction |= ((value >> offset) & 0x1) << i;
>  	}
>
> -	return (direction == ST_GPIO_DIRECTION_IN);
> +	if (direction == ST_GPIO_DIRECTION_IN)
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
>  }
>
>  /* Pinctrl Groups */
> @@ -996,6 +1002,7 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
>  	unsigned int function;
>  	int offset = st_gpio_pin(pin_id);
>  	char f[16];
> +	int oe;
>
>  	mutex_unlock(&pctldev->mutex);
>  	pc = st_get_pio_control(pctldev, pin_id);
> @@ -1008,10 +1015,11 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
>  	else
>  		snprintf(f, 5, "GPIO");
>
> +	oe = st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset);
>  	seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
>  		"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
>  		"de:%ld,rt-clk:%ld,rt-delay:%ld]",
> -		!st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset),
> +		(oe == GPIO_LINE_DIRECTION_OUT),
>  		ST_PINCONF_UNPACK_PU(config),
>  		ST_PINCONF_UNPACK_OD(config),
>  		f,
> diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
> index 564660028fcc..132a0f217692 100644
> --- a/drivers/pinctrl/pinctrl-stmfx.c
> +++ b/drivers/pinctrl/pinctrl-stmfx.c
> @@ -134,10 +134,14 @@ static int stmfx_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
>  	ret = regmap_read(pctl->stmfx->map, reg, &val);
>  	/*
>  	 * On stmfx, gpio pins direction is (0)input, (1)output.
> -	 * .get_direction returns 0=out, 1=in
>  	 */
> +	if (ret)
> +		return ret;
>
> -	return ret ? ret : !(val & mask);
> +	if (val & mask)
> +		return GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int stmfx_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
> @@ -223,6 +227,13 @@ static int stmfx_pinconf_get(struct pinctrl_dev *pctldev,
>  	dir = stmfx_gpio_get_direction(&pctl->gpio_chip, pin);
>  	if (dir < 0)
>  		return dir;
> +
> +	/*
> +	 * Currently the gpiolib IN is 1 and OUT is 0 but let's not count
> +	 * on it just to be on the safe side also in the future :)
> +	 */
> +	dir = (dir == GPIO_LINE_DIRECTION_IN) ? 1 : 0;
> +
>  	type = stmfx_pinconf_get_type(pctl, pin);
>  	if (type < 0)
>  		return type;
> @@ -360,7 +371,7 @@ static void stmfx_pinconf_dbg_show(struct pinctrl_dev *pctldev,
>  	if (val < 0)
>  		return;
>
> -	if (!dir) {
> +	if (dir == GPIO_LINE_DIRECTION_OUT) {
>  		seq_printf(s, "output %s ", val ? "high" : "low");
>  		if (type)
>  			seq_printf(s, "open drain %s internal pull-up ",
> diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
> index 566665931a04..6e74bd87d959 100644
> --- a/drivers/pinctrl/pinctrl-sx150x.c
> +++ b/drivers/pinctrl/pinctrl-sx150x.c
> @@ -391,13 +391,16 @@ static int sx150x_gpio_get_direction(struct gpio_chip *chip,
>  	int ret;
>
>  	if (sx150x_pin_is_oscio(pctl, offset))
> -		return false;
> +		return GPIO_LINE_DIRECTION_OUT;
>
>  	ret = regmap_read(pctl->regmap, pctl->data->reg_dir, &value);
>  	if (ret < 0)
>  		return ret;
>
> -	return !!(value & BIT(offset));
> +	if (value & BIT(offset))
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
>  }
>
>  static int sx150x_gpio_get(struct gpio_chip *chip, unsigned int offset)
> @@ -687,7 +690,7 @@ static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
>  		if (ret < 0)
>  			return ret;
>
> -		if (ret)
> +		if (ret == GPIO_LINE_DIRECTION_IN)
>  			return -EINVAL;
>
>  		ret = sx150x_gpio_get(&pctl->gpio, pin);
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 763da0be10d6..8844ca1261d5 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -485,8 +485,8 @@ static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
>
>  	val = msm_readl_ctl(pctrl, g);
>
> -	/* 0 = output, 1 = input */
> -	return val & BIT(g->oe_bit) ? 0 : 1;
> +	return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
> +				      GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
> diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
> index 2d5e0435af0a..72e0669ca7c8 100644
> --- a/drivers/pinctrl/stm32/pinctrl-stm32.c
> +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
> @@ -283,9 +283,9 @@ static int stm32_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
>
>  	stm32_pmx_get_mode(bank, pin, &mode, &alt);
>  	if ((alt == 0) && (mode == 0))
> -		ret = 1;
> +		ret = GPIO_LINE_DIRECTION_IN;
>  	else if ((alt == 0) && (mode == 1))
> -		ret = 0;
> +		ret = GPIO_LINE_DIRECTION_OUT;
>  	else
>  		ret = -EINVAL;
>
> diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
> index 4d5cd7d8c760..7f2aceba295a 100644
> --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
> +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
> @@ -486,8 +486,10 @@ static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
>  	u32 val;
>
>  	val = readl_relaxed(data->base + reg_dir);
> -	/* Return 0 == output, 1 == input */
> -	return !(val & BIT(bit));
> +	if (val & BIT(bit))
> +		GPIO_LINE_DIRECTION_OUT;
> +
> +	return GPIO_LINE_DIRECTION_IN;
>  }
>
>  static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
> --
> 2.21.0
>
>
> --
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Linus Walleij]

On Wed, Nov 13, 2019 at 7:52 AM Vaittinen, Matti
<Matti.Vaittinen@fi.rohmeurope.com> wrote:
> On Wed, 2019-11-13 at 14:30 +0800, kbuild test robot wrote:
> > Hi Matti,
> >
> > Thank you for the patch! Perhaps something to improve:
> >
> > [auto build test WARNING on 70d97e099bb426ecb3ad4bf31e88dbf2ef4b2e4c]
> >
>
> >    480        static int wmt_gpio_get_direction(struct gpio_chip
> > *chip, unsigned offset)
> >    481        {
> >    482                struct wmt_pinctrl_data *data =
> > gpiochip_get_data(chip);
> >    483                u32 bank = WMT_BANK_FROM_PIN(offset);
> >    484                u32 bit = WMT_BIT_FROM_PIN(offset);
> >    485                u32 reg_dir = data->banks[bank].reg_dir;
> >    486                u32 val;
> >    487
> >    488                val = readl_relaxed(data->base + reg_dir);
> >    489                if (val & BIT(bit))
> >  > 490                        GPIO_LINE_DIRECTION_OUT;
>
> Right. Return is missing. I think I already fixed this - I guess I sent
> wrong version... Sorry guys. I'll do v3 with only this return added -
> and I'll send it to limited amount of recipients as I think most of you
> guys may not be interested. Probably to Linus W, Geert and GPIO list
> only. Let me know if you want to see the v3 (or other subsequent
> patches)

I think I already merged it, just send a new patch on top fixing the
problem.

Yours,
Linus Walleij

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Vaittinen, Matti]

Hello Linus,

On Wed, 2019-11-13 at 10:40 +0100, Linus Walleij wrote:
> On Wed, Nov 13, 2019 at 7:52 AM Vaittinen, Matti
> <Matti.Vaittinen@fi.rohmeurope.com> wrote:
> > On Wed, 2019-11-13 at 14:30 +0800, kbuild test robot wrote:
> > > Hi Matti,
> > > 
> > > Thank you for the patch! Perhaps something to improve:
> > > 
> > > [auto build test WARNING on
> > > 70d97e099bb426ecb3ad4bf31e88dbf2ef4b2e4c]
> > > 
> > >    480        static int wmt_gpio_get_direction(struct gpio_chip
> > > *chip, unsigned offset)
> > >    481        {
> > >    482                struct wmt_pinctrl_data *data =
> > > gpiochip_get_data(chip);
> > >    483                u32 bank = WMT_BANK_FROM_PIN(offset);
> > >    484                u32 bit = WMT_BIT_FROM_PIN(offset);
> > >    485                u32 reg_dir = data->banks[bank].reg_dir;
> > >    486                u32 val;
> > >    487
> > >    488                val = readl_relaxed(data->base + reg_dir);
> > >    489                if (val & BIT(bit))
> > >  > 490                        GPIO_LINE_DIRECTION_OUT;
> > 
> > Right. Return is missing. I think I already fixed this - I guess I
> > sent
> > wrong version... Sorry guys. I'll do v3 with only this return added

It appears I didn't send wrong patch. The whole wmt was left uncompiled
as the folder was excluded from my build by arch and I didn't spot
that. So I'll humbly raise my arm as a sign of an error ;)

> > -
> > and I'll send it to limited amount of recipients as I think most of
> > you
> > guys may not be interested. Probably to Linus W, Geert and GPIO
> > list
> > only. Let me know if you want to see the v3 (or other subsequent
> > patches)
> 
> I think I already merged it, just send a new patch on top fixing the
> problem.

Hmmm. I don't think I received notification about the patch being
applied... But in that case, please ignore v2 I sent some time ago -
I'll do a fix patch on top of the already applied one then. I'll send
it out soon(ish).

Br,
	Matti
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Vaittinen, Matti]

On Wed, 2019-11-13 at 10:40 +0100, Linus Walleij wrote:
> On Wed, Nov 13, 2019 at 7:52 AM Vaittinen, Matti
> <Matti.Vaittinen@fi.rohmeurope.com> wrote:
> > On Wed, 2019-11-13 at 14:30 +0800, kbuild test robot wrote:
> > Right. Return is missing. I think I already fixed this - I guess I
> > sent
> > wrong version... Sorry guys. I'll do v3 with only this return added
> > -
> > and I'll send it to limited amount of recipients as I think most of
> > you
> > guys may not be interested. Probably to Linus W, Geert and GPIO
> > list
> > only. Let me know if you want to see the v3 (or other subsequent
> > patches)
> 
> I think I already merged it, just send a new patch on top fixing the
> problem.

Hmm. Are you sure you did merge the pincontrol part already? I don't
see it in your GPIO tree, devel or for-next branches. Can you please
point me the branch - I already destroyed my original pincontrol commit
which had the bug when I created the v2.

Br,
	Matti Vaittinen

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Linus Walleij]

On Wed, Nov 13, 2019 at 11:06 AM Vaittinen, Matti
<Matti.Vaittinen@fi.rohmeurope.com> wrote:
> On Wed, 2019-11-13 at 10:40 +0100, Linus Walleij wrote:

> > I think I already merged it, just send a new patch on top fixing the
> > problem.
>
> Hmm. Are you sure you did merge the pincontrol part already?

No I confused it for the GPIO part. Sorry!

Please keep iterarating this patch.

Yours,
Linus Walleij

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Vaittinen, Matti]

Hi-deeee-Ho Peeps!


On Wed, 2019-11-13 at 10:40 +0100, Linus Walleij wrote:
> On Wed, Nov 13, 2019 at 7:52 AM Vaittinen, Matti
> <Matti.Vaittinen@fi.rohmeurope.com> wrote:
> > On Wed, 2019-11-13 at 14:30 +0800, kbuild test robot wrote:
> > > Hi Matti,
> > > 
> > > Thank you for the patch! Perhaps something to improve:
> > > 
> > > [auto build test WARNING on
> > > 70d97e099bb426ecb3ad4bf31e88dbf2ef4b2e4c]
> > > 
> > >    480        static int wmt_gpio_get_direction(struct gpio_chip
> > > *chip, unsigned offset)
> > >    481        {
> > >    482                struct wmt_pinctrl_data *data =
> > > gpiochip_get_data(chip);
> > >    483                u32 bank = WMT_BANK_FROM_PIN(offset);
> > >    484                u32 bit = WMT_BIT_FROM_PIN(offset);
> > >    485                u32 reg_dir = data->banks[bank].reg_dir;
> > >    486                u32 val;
> > >    487
> > >    488                val = readl_relaxed(data->base + reg_dir);
> > >    489                if (val & BIT(bit))
> > >  > 490                        GPIO_LINE_DIRECTION_OUT;
> > 
> > Right. Return is missing. I think I already fixed this - I guess I
> > sent
> > wrong version... Sorry guys. I'll do v3 with only this return added
> > -
> > and I'll send it to limited amount of recipients as I think most of
> > you
> > guys may not be interested. Probably to Linus W, Geert and GPIO
> > list
> > only. Let me know if you want to see the v3 (or other subsequent
> > patches)

I just noticed this was never merged even though I was sure I sent a
fixed version. It took me a while but I guess I managed to dig out the
reason...

First I sent v2 with the return missing:
https://lore.kernel.org/linux-gpio/20191112141819.GA22076@localhost.localdomain/

And then I did indeed send a fixed version:
https://lore.kernel.org/linux-gpio/20191113071501.GA22158@localhost.localdomain/#Z30drivers:pinctrl:vt8500:pinctrl-wmt.c

...but titled this as v2 too. I guess that's why it never caught
correct attention.

I tried rebasing this to current gpio/devel. The pinctrl-ingenic.c had
gained trivial conflict - do you want me to get the pinctrl tree and do
merging on top of it && resending this or do you want to try applying
it?

Sorry for messing with the versions!

Br,
	Matti Vaittinen
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION

[Bjorn Andersson]

On Tue 12 Nov 06:18 PST 2019, Matti Vaittinen wrote:
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 763da0be10d6..8844ca1261d5 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -485,8 +485,8 @@ static int msm_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
>  
>  	val = msm_readl_ctl(pctrl, g);
>  
> -	/* 0 = output, 1 = input */
> -	return val & BIT(g->oe_bit) ? 0 : 1;
> +	return val & BIT(g->oe_bit) ? GPIO_LINE_DIRECTION_OUT :
> +				      GPIO_LINE_DIRECTION_IN;

For pinctrl-msm:
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

>  }

Regards,
Bjorn

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek