Linux-mediatek Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 4.14 083/371] thermal: mediatek: fix register index error
       [not found] <20200116172403.18149-1-sashal@kernel.org>
@ 2020-01-16 17:19 ` Sasha Levin
  2020-01-16 17:22 ` [PATCH AUTOSEL 4.14 277/371] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
  2020-01-16 17:23 ` [PATCH AUTOSEL 4.14 329/371] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
  2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-01-16 17:19 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, linux-pm, Michael Kao, Eduardo Valentin,
	linux-mediatek, linux-arm-kernel

From: Michael Kao <michael.kao@mediatek.com>

[ Upstream commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 ]

The index of msr and adcpnp should match the sensor
which belongs to the selected bank in the for loop.

Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/mtk_thermal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 1e61c09153c9..76b92083744c 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -407,7 +407,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	u32 raw;
 
 	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-		raw = readl(mt->thermal_base + conf->msr[i]);
+		raw = readl(mt->thermal_base +
+			    conf->msr[conf->bank_data[bank->id].sensors[i]]);
 
 		temp = raw_to_mcelsius(mt,
 				       conf->bank_data[bank->id].sensors[i],
@@ -544,7 +545,8 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
 	for (i = 0; i < conf->bank_data[num].num_sensors; i++)
 		writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-		       mt->thermal_base + conf->adcpnp[i]);
+		       mt->thermal_base +
+		       conf->adcpnp[conf->bank_data[num].sensors[i]]);
 
 	writel((1 << conf->bank_data[num].num_sensors) - 1,
 	       mt->thermal_base + TEMP_MONCTL0);
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH AUTOSEL 4.14 277/371] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode
       [not found] <20200116172403.18149-1-sashal@kernel.org>
  2020-01-16 17:19 ` [PATCH AUTOSEL 4.14 083/371] thermal: mediatek: fix register index error Sasha Levin
@ 2020-01-16 17:22 ` Sasha Levin
  2020-01-16 17:23 ` [PATCH AUTOSEL 4.14 329/371] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin
  2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-01-16 17:22 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Joerg Roedel, iommu, linux-mediatek, Yong Wu,
	linux-arm-kernel

From: Yong Wu <yong.wu@mediatek.com>

[ Upstream commit 76ce65464fcd2c21db84391572b7938b716aceb0 ]

In M4U 4GB mode, the physical address is remapped as below:

CPU Physical address:

====================

0      1G       2G     3G       4G     5G
|---A---|---B---|---C---|---D---|---E---|
+--I/O--+------------Memory-------------+

IOMMU output physical address:
 =============================

                                4G      5G     6G      7G      8G
                                |---E---|---B---|---C---|---D---|
                                +------------Memory-------------+

The Region 'A'(I/O) can not be mapped by M4U; For Region 'B'/'C'/'D', the
bit32 of the CPU physical address always is needed to set, and for Region
'E', the CPU physical address keep as is. something looks like this:
CPU PA         ->    M4U OUTPUT PA
0x4000_0000          0x1_4000_0000 (Add bit32)
0x8000_0000          0x1_8000_0000 ...
0xc000_0000          0x1_c000_0000 ...
0x1_0000_0000        0x1_0000_0000 (No change)

Additionally, the iommu consumers always use the CPU phyiscal address.

The PA in the iova_to_phys that is got from v7s always is u32, But
from the CPU point of view, PA only need add BIT(32) when PA < 0x4000_0000.

Fixes: 30e2fccf9512 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/mtk_iommu.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c30f62700431..0f99e95a1a73 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -115,6 +115,30 @@ struct mtk_iommu_domain {
 
 static struct iommu_ops mtk_iommu_ops;
 
+/*
+ * In M4U 4GB mode, the physical address is remapped as below:
+ *
+ * CPU Physical address:
+ * ====================
+ *
+ * 0      1G       2G     3G       4G     5G
+ * |---A---|---B---|---C---|---D---|---E---|
+ * +--I/O--+------------Memory-------------+
+ *
+ * IOMMU output physical address:
+ *  =============================
+ *
+ *                                 4G      5G     6G      7G      8G
+ *                                 |---E---|---B---|---C---|---D---|
+ *                                 +------------Memory-------------+
+ *
+ * The Region 'A'(I/O) can NOT be mapped by M4U; For Region 'B'/'C'/'D', the
+ * bit32 of the CPU physical address always is needed to set, and for Region
+ * 'E', the CPU physical address keep as is.
+ * Additionally, The iommu consumers always use the CPU phyiscal address.
+ */
+#define MTK_IOMMU_4GB_MODE_REMAP_BASE	 0x40000000
+
 static LIST_HEAD(m4ulist);	/* List all the M4U HWs */
 
 #define for_each_m4u(data)	list_for_each_entry(data, &m4ulist, list)
@@ -404,7 +428,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
 	pa = dom->iop->iova_to_phys(dom->iop, iova);
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
-	if (data->enable_4GB)
+	if (data->enable_4GB && pa < MTK_IOMMU_4GB_MODE_REMAP_BASE)
 		pa |= BIT_ULL(32);
 
 	return pa;
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH AUTOSEL 4.14 329/371] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready
       [not found] <20200116172403.18149-1-sashal@kernel.org>
  2020-01-16 17:19 ` [PATCH AUTOSEL 4.14 083/371] thermal: mediatek: fix register index error Sasha Levin
  2020-01-16 17:22 ` [PATCH AUTOSEL 4.14 277/371] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
@ 2020-01-16 17:23 ` Sasha Levin
  2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-01-16 17:23 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Jakub Kicinski, netdev, linux-wireless,
	linux-mediatek, linux-arm-kernel, Lorenzo Bianconi, Kalle Valo

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 ]

Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by
coverity with the following error:

Logical vs. bitwise operator
The expression's value does not depend on the operands; inadvertent use
of the wrong operator is a likely logic error.

Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c
index ca09a5d4305e..71a47459bf8a 100644
--- a/drivers/net/wireless/mediatek/mt7601u/phy.c
+++ b/drivers/net/wireless/mediatek/mt7601u/phy.c
@@ -221,7 +221,7 @@ int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
 
 	do {
 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
-		if (val && ~val)
+		if (val && val != 0xff)
 			break;
 	} while (--i);
 
-- 
2.20.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200116172403.18149-1-sashal@kernel.org>
2020-01-16 17:19 ` [PATCH AUTOSEL 4.14 083/371] thermal: mediatek: fix register index error Sasha Levin
2020-01-16 17:22 ` [PATCH AUTOSEL 4.14 277/371] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Sasha Levin
2020-01-16 17:23 ` [PATCH AUTOSEL 4.14 329/371] mt7601u: fix bbp version check in mt7601u_wait_bbp_ready Sasha Levin

Linux-mediatek Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mediatek/0 linux-mediatek/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mediatek linux-mediatek/ https://lore.kernel.org/linux-mediatek \
		linux-mediatek@lists.infradead.org
	public-inbox-index linux-mediatek

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mediatek


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git