linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Stanley Chu <stanley.chu@mediatek.com>
To: <linux-scsi@vger.kernel.org>, <martin.peter~sen@oracle.com>,
	<avri.altman@wdc.com>, <alim.akhtar@samsung.com>,
	<jejb@linux.ibm.com>, <bvanassche@acm.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>,
	andy.teng@mediatek.com, chun-hung.wu@mediatek.com,
	kuohong.wang@mediatek.com, linux-kernel@vger.kernel.org,
	cang@codeaurora.org, linux-mediatek@lists.infradead.org,
	peter.wang@mediatek.com, matthias.bgg@gmail.com,
	beanhuo@micron.com, linux-arm-kernel@lists.infradead.org,
	asutoshd@codeaurora.org
Subject: [PATCH v7 7/7] scsi: ufs-mediatek: customize the delay for host enabling
Date: Wed, 18 Mar 2020 18:40:16 +0800	[thread overview]
Message-ID: <20200318104016.28049-8-stanley.chu@mediatek.com> (raw)
In-Reply-To: <20200318104016.28049-1-stanley.chu@mediatek.com>

MediaTek platform and UFS controller can dynamically customize
the delay for host enabling according to different scenarios.

For example, if UniPro enters lower-power mode, such delay can
be minimized, otherwise longer delay shall be expected.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 43 ++++++++++++++++++++++++++-------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 2 files changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 73bd4c245f4a..40a66b31b31f 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -30,11 +30,6 @@
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
 
-#define ufs_mtk_unipro_powerdown(hba, powerdown) \
-	ufshcd_dme_set(hba, \
-		       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0), \
-		       powerdown)
-
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -71,6 +66,21 @@ static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 	}
 }
 
+static int ufs_mtk_hce_enable_notify(struct ufs_hba *hba,
+				     enum ufs_notify_change_status status)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	if (status == PRE_CHANGE) {
+		if (host->unipro_lpm)
+			hba->hba_enable_delay_us = 0;
+		else
+			hba->hba_enable_delay_us = 600;
+	}
+
+	return 0;
+}
+
 static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -324,12 +334,26 @@ static int ufs_mtk_pwr_change_notify(struct ufs_hba *hba,
 	return ret;
 }
 
+static int ufs_mtk_unipro_set_pm(struct ufs_hba *hba, u32 lpm)
+{
+	int ret;
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	ret = ufshcd_dme_set(hba,
+			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
+			     lpm);
+	if (!ret)
+		host->unipro_lpm = lpm;
+
+	return ret;
+}
+
 static int ufs_mtk_pre_link(struct ufs_hba *hba)
 {
 	int ret;
 	u32 tmp;
 
-	ufs_mtk_unipro_powerdown(hba, 0);
+	ufs_mtk_unipro_set_pm(hba, 0);
 
 	/*
 	 * Setting PA_Local_TX_LCC_Enable to 0 before link startup
@@ -437,7 +461,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 0);
+	err = ufs_mtk_unipro_set_pm(hba, 0);
 	if (err)
 		return err;
 
@@ -458,10 +482,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 1);
+	err = ufs_mtk_unipro_set_pm(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufs_mtk_unipro_powerdown(hba, 0);
+		ufs_mtk_unipro_set_pm(hba, 0);
 		return err;
 	}
 
@@ -552,6 +576,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.name                = "mediatek.ufshci",
 	.init                = ufs_mtk_init,
 	.setup_clocks        = ufs_mtk_setup_clocks,
+	.hce_enable_notify   = ufs_mtk_hce_enable_notify,
 	.link_startup_notify = ufs_mtk_link_startup_notify,
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.apply_dev_quirks    = ufs_mtk_apply_dev_quirks,
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 4c787b99fe41..5bbd3e9cbae2 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -91,6 +91,7 @@ enum {
 struct ufs_mtk_host {
 	struct ufs_hba *hba;
 	struct phy *mphy;
+	bool unipro_lpm;
 	bool ref_clk_enabled;
 	u16 ref_clk_ungating_wait_us;
 	u16 ref_clk_gating_wait_us;
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  parent reply	other threads:[~2020-03-18 10:41 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-18 10:40 [PATCH v7 0/7] scsi: ufs: some cleanups and make the delay for host enabling customizable Stanley Chu
2020-03-18 10:40 ` [PATCH v7 1/7] scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() Stanley Chu
2020-03-18 10:40 ` [PATCH v7 2/7] scsi: ufs: use an enum for host capabilities Stanley Chu
2020-03-18 22:42   ` [EXT] " Bean Huo (beanhuo)
2020-03-18 10:40 ` [PATCH v7 3/7] scsi: ufs: introduce common and flexible delay function Stanley Chu
2020-03-18 22:10   ` [EXT] " Bean Huo (beanhuo)
2020-03-19  0:10     ` Stanley Chu
2020-03-18 10:40 ` [PATCH v7 4/7] scsi: ufs-mediatek: use common delay function for required places Stanley Chu
2020-03-18 10:40 ` [PATCH v7 5/7] scsi: ufs: allow customized delay for host enabling Stanley Chu
2020-03-18 10:40 ` [PATCH v7 6/7] scsi: ufs: make HCE polling more compact to improve initialization latency Stanley Chu
2020-03-18 10:40 ` Stanley Chu [this message]
2020-03-27  2:09 ` [PATCH v7 0/7] scsi: ufs: some cleanups and make the delay for host enabling customizable Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200318104016.28049-8-stanley.chu@mediatek.com \
    --to=stanley.chu@mediatek.com \
    --cc=alim.akhtar@samsung.com \
    --cc=andy.teng@mediatek.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=chun-hung.wu@mediatek.com \
    --cc=jejb@linux.ibm.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.peter~sen@oracle.com \
    --cc=matthias.bgg@gmail.com \
    --cc=peter.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).