* [PATCH v6 1/4] dt-bindings: mmc: Convert mtk-sd to json-schema
2020-10-12 12:45 [PATCH v6 0/4] Add mmc support for MT8192 SoC Wenbin Mei
@ 2020-10-12 12:45 ` Wenbin Mei
2020-10-13 16:55 ` Rob Herring
2020-10-12 12:45 ` [PATCH v6 2/4] mmc: dt-bindings: add support for MT8192 SoC Wenbin Mei
` (2 subsequent siblings)
3 siblings, 1 reply; 13+ messages in thread
From: Wenbin Mei @ 2020-10-12 12:45 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring
Cc: devicetree, Wenbin Mei, srv_heupstream, linux-mmc, linux-kernel,
linux-mediatek, Chaotian Jing, Matthias Brugger,
linux-arm-kernel
Convert the mtk-sd binding to DT schema format using json-schema.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
.../devicetree/bindings/mmc/mtk-sd.txt | 75 --------
.../devicetree/bindings/mmc/mtk-sd.yaml | 163 ++++++++++++++++++
2 files changed, 163 insertions(+), 75 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.txt
create mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.yaml
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
deleted file mode 100644
index 26a8f320a156..000000000000
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-* MTK MMC controller
-
-The MTK MSDC can act as a MMC controller
-to support MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the msdc driver.
-
-Required properties:
-- compatible: value should be either of the following.
- "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
- "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
- "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
- "mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
- "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
- "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
- "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
- "mediatek,mt7622-mmc": for MT7622 SoC
- "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
- "mediatek,mt7620-mmc", for MT7621 SoC (and others)
-
-- reg: physical base address of the controller and length
-- interrupts: Should contain MSDC interrupt number
-- clocks: Should contain phandle for the clock feeding the MMC controller
-- clock-names: Should contain the following:
- "source" - source clock (required)
- "hclk" - HCLK which used for host (required)
- "source_cg" - independent source clock gate (required for MT2712)
- "bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin ctrl
-- pinctrl-1: should contain uhs mode pin ctrl
-- vmmc-supply: power to the Core
-- vqmmc-supply: power to the IO
-
-Optional properties:
-- assigned-clocks: PLL of the source clock
-- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
-- hs400-ds-delay: HS400 DS delay setting
-- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
- This field has total 32 stages.
- The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
- This field has total 32 stages.
- The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
- If present,HS400 command responses are sampled on rising edges.
- If not present,HS400 command responses are sampled on falling edges.
-- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
- error caused by stop clock(fifo full)
- Valid range = [0:0x7]. if not present, default value is 0.
- applied to compatible "mediatek,mt2701-mmc".
-- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
-- reset-names: Should be "hrst".
-
-Examples:
-mmc0: mmc@11230000 {
- compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
- reg = <0 0x11230000 0 0x108>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
- vmmc-supply = <&mt6397_vemc_3v3_reg>;
- vqmmc-supply = <&mt6397_vio18_reg>;
- clocks = <&pericfg CLK_PERI_MSDC30_0>,
- <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
- clock-names = "source", "hclk";
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&mmc0_pins_default>;
- pinctrl-1 = <&mmc0_pins_uhs>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
- hs400-ds-delay = <0x14015>;
- mediatek,hs200-cmd-int-delay = <26>;
- mediatek,hs400-cmd-int-delay = <14>;
- mediatek,hs400-cmd-resp-sel-rising;
-};
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
new file mode 100644
index 000000000000..21a2fce5b7ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTK MSDC Storage Host Controller Binding
+
+maintainers:
+ - Chaotian Jing <chaotian.jing@mediatek.com>
+ - Wenbin Mei <wenbin.mei@mediatek.com>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-mmc
+ - mediatek,mt2712-mmc
+ - mediatek,mt6779-mmc
+ - mediatek,mt7620-mmc
+ - mediatek,mt7622-mmc
+ - mediatek,mt8135-mmc
+ - mediatek,mt8173-mmc
+ - mediatek,mt8183-mmc
+ - mediatek,mt8516-mmc
+ - items:
+ - const: mediatek,mt7623-mmc
+ - const: mediatek,mt2701-mmc
+
+ clocks:
+ description:
+ Should contain phandle for the clock feeding the MMC controller.
+ minItems: 2
+ maxItems: 4
+ items:
+ - description: source clock (required).
+ - description: HCLK which used for host (required).
+ - description: independent source clock gate (required for MT2712).
+ - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
+
+ clock-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ - const: source
+ - const: hclk
+ - const: source_cg
+ - const: bus_clk
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: state_uhs
+
+ pinctrl-0:
+ description:
+ should contain default/high speed pin ctrl.
+ maxItems: 1
+
+ pinctrl-1:
+ description:
+ should contain uhs mode pin ctrl.
+ maxItems: 1
+
+ assigned-clocks:
+ description:
+ PLL of the source clock.
+ maxItems: 1
+
+ assigned-clock-parents:
+ description:
+ parent of source clock, used for HS400 mode to get 400Mhz source clock.
+ maxItems: 1
+
+ hs400-ds-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ HS400 DS delay setting.
+ minimum: 0
+ maximum: 0xffffffff
+
+ mediatek,hs200-cmd-int-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ HS200 command internal delay setting.
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+ minimum: 0
+ maximum: 31
+
+ mediatek,hs400-cmd-int-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ HS400 command internal delay setting.
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+ minimum: 0
+ maximum: 31
+
+ mediatek,hs400-cmd-resp-sel-rising:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ HS400 command response sample selection.
+ If present, HS400 command responses are sampled on rising edges.
+ If not present, HS400 command responses are sampled on falling edges.
+
+ mediatek,latch-ck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
+ data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
+ if not present, default value is 0.
+ applied to compatible "mediatek,mt2701-mmc".
+ minimum: 0
+ maximum: 7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: hrst
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pinctrl-names
+ - pinctrl-0
+ - pinctrl-1
+ - vmmc-supply
+ - vqmmc-supply
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8173-mmc";
+ reg = <0x11230000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+ vmmc-supply = <&mt6397_vemc_3v3_reg>;
+ vqmmc-supply = <&mt6397_vio18_reg>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0>,
+ <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+ clock-names = "source", "hclk";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+ hs400-ds-delay = <0x14015>;
+ mediatek,hs200-cmd-int-delay = <26>;
+ mediatek,hs400-cmd-int-delay = <14>;
+ mediatek,hs400-cmd-resp-sel-rising;
+ };
+
+...
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v6 1/4] dt-bindings: mmc: Convert mtk-sd to json-schema
2020-10-12 12:45 ` [PATCH v6 1/4] dt-bindings: mmc: Convert mtk-sd to json-schema Wenbin Mei
@ 2020-10-13 16:55 ` Rob Herring
0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2020-10-13 16:55 UTC (permalink / raw)
To: Wenbin Mei
Cc: devicetree, Ulf Hansson, srv_heupstream, linux-mmc, linux-kernel,
linux-mediatek, Chaotian Jing, Matthias Brugger,
linux-arm-kernel
On Mon, Oct 12, 2020 at 08:45:44PM +0800, Wenbin Mei wrote:
> Convert the mtk-sd binding to DT schema format using json-schema.
>
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> ---
> .../devicetree/bindings/mmc/mtk-sd.txt | 75 --------
> .../devicetree/bindings/mmc/mtk-sd.yaml | 163 ++++++++++++++++++
> 2 files changed, 163 insertions(+), 75 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.txt
> create mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> deleted file mode 100644
> index 26a8f320a156..000000000000
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ /dev/null
> @@ -1,75 +0,0 @@
> -* MTK MMC controller
> -
> -The MTK MSDC can act as a MMC controller
> -to support MMC, SD, and SDIO types of memory cards.
> -
> -This file documents differences between the core properties in mmc.txt
> -and the properties used by the msdc driver.
> -
> -Required properties:
> -- compatible: value should be either of the following.
> - "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> - "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> - "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
> - "mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
> - "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
> - "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> - "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> - "mediatek,mt7622-mmc": for MT7622 SoC
> - "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
> - "mediatek,mt7620-mmc", for MT7621 SoC (and others)
> -
> -- reg: physical base address of the controller and length
> -- interrupts: Should contain MSDC interrupt number
> -- clocks: Should contain phandle for the clock feeding the MMC controller
> -- clock-names: Should contain the following:
> - "source" - source clock (required)
> - "hclk" - HCLK which used for host (required)
> - "source_cg" - independent source clock gate (required for MT2712)
> - "bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
> -- pinctrl-names: should be "default", "state_uhs"
> -- pinctrl-0: should contain default/high speed pin ctrl
> -- pinctrl-1: should contain uhs mode pin ctrl
> -- vmmc-supply: power to the Core
> -- vqmmc-supply: power to the IO
> -
> -Optional properties:
> -- assigned-clocks: PLL of the source clock
> -- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
> -- hs400-ds-delay: HS400 DS delay setting
> -- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
> - This field has total 32 stages.
> - The value is an integer from 0 to 31.
> -- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
> - This field has total 32 stages.
> - The value is an integer from 0 to 31.
> -- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> - If present,HS400 command responses are sampled on rising edges.
> - If not present,HS400 command responses are sampled on falling edges.
> -- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
> - error caused by stop clock(fifo full)
> - Valid range = [0:0x7]. if not present, default value is 0.
> - applied to compatible "mediatek,mt2701-mmc".
> -- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
> -- reset-names: Should be "hrst".
> -
> -Examples:
> -mmc0: mmc@11230000 {
> - compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
> - reg = <0 0x11230000 0 0x108>;
> - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
> - vmmc-supply = <&mt6397_vemc_3v3_reg>;
> - vqmmc-supply = <&mt6397_vio18_reg>;
> - clocks = <&pericfg CLK_PERI_MSDC30_0>,
> - <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
> - clock-names = "source", "hclk";
> - pinctrl-names = "default", "state_uhs";
> - pinctrl-0 = <&mmc0_pins_default>;
> - pinctrl-1 = <&mmc0_pins_uhs>;
> - assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
> - assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
> - hs400-ds-delay = <0x14015>;
> - mediatek,hs200-cmd-int-delay = <26>;
> - mediatek,hs400-cmd-int-delay = <14>;
> - mediatek,hs400-cmd-resp-sel-rising;
> -};
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> new file mode 100644
> index 000000000000..21a2fce5b7ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MTK MSDC Storage Host Controller Binding
> +
> +maintainers:
> + - Chaotian Jing <chaotian.jing@mediatek.com>
> + - Wenbin Mei <wenbin.mei@mediatek.com>
> +
> +allOf:
> + - $ref: mmc-controller.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-mmc
> + - mediatek,mt2712-mmc
> + - mediatek,mt6779-mmc
> + - mediatek,mt7620-mmc
> + - mediatek,mt7622-mmc
> + - mediatek,mt8135-mmc
> + - mediatek,mt8173-mmc
> + - mediatek,mt8183-mmc
> + - mediatek,mt8516-mmc
> + - items:
> + - const: mediatek,mt7623-mmc
> + - const: mediatek,mt2701-mmc
> +
> + clocks:
> + description:
> + Should contain phandle for the clock feeding the MMC controller.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: source clock (required).
> + - description: HCLK which used for host (required).
> + - description: independent source clock gate (required for MT2712).
> + - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
> +
> + clock-names:
> + minItems: 2
> + maxItems: 4
> + items:
> + - const: source
> + - const: hclk
> + - const: source_cg
> + - const: bus_clk
> +
> + pinctrl-names:
> + items:
> + - const: default
> + - const: state_uhs
> +
> + pinctrl-0:
> + description:
> + should contain default/high speed pin ctrl.
> + maxItems: 1
> +
> + pinctrl-1:
> + description:
> + should contain uhs mode pin ctrl.
> + maxItems: 1
> +
> + assigned-clocks:
> + description:
> + PLL of the source clock.
> + maxItems: 1
> +
> + assigned-clock-parents:
> + description:
> + parent of source clock, used for HS400 mode to get 400Mhz source clock.
> + maxItems: 1
> +
> + hs400-ds-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + HS400 DS delay setting.
> + minimum: 0
> + maximum: 0xffffffff
> +
> + mediatek,hs200-cmd-int-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + HS200 command internal delay setting.
> + This field has total 32 stages.
> + The value is an integer from 0 to 31.
> + minimum: 0
> + maximum: 31
> +
> + mediatek,hs400-cmd-int-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + HS400 command internal delay setting.
> + This field has total 32 stages.
> + The value is an integer from 0 to 31.
> + minimum: 0
> + maximum: 31
> +
> + mediatek,hs400-cmd-resp-sel-rising:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + HS400 command response sample selection.
> + If present, HS400 command responses are sampled on rising edges.
> + If not present, HS400 command responses are sampled on falling edges.
> +
> + mediatek,latch-ck:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
> + data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
> + if not present, default value is 0.
> + applied to compatible "mediatek,mt2701-mmc".
> + minimum: 0
> + maximum: 7
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + const: hrst
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - pinctrl-names
> + - pinctrl-0
> + - pinctrl-1
> + - vmmc-supply
> + - vqmmc-supply
Add:
unevaluatedProperties: false
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v6 2/4] mmc: dt-bindings: add support for MT8192 SoC
2020-10-12 12:45 [PATCH v6 0/4] Add mmc support for MT8192 SoC Wenbin Mei
2020-10-12 12:45 ` [PATCH v6 1/4] dt-bindings: mmc: Convert mtk-sd to json-schema Wenbin Mei
@ 2020-10-12 12:45 ` Wenbin Mei
2020-10-13 16:57 ` Rob Herring
2020-10-12 12:45 ` [PATCH v6 3/4] arm64: dts: mt8192: add mmc device node Wenbin Mei
2020-10-12 12:45 ` [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc Wenbin Mei
3 siblings, 1 reply; 13+ messages in thread
From: Wenbin Mei @ 2020-10-12 12:45 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring
Cc: devicetree, Wenbin Mei, srv_heupstream, linux-mmc, linux-kernel,
linux-mediatek, Chaotian Jing, Matthias Brugger,
linux-arm-kernel
MT8192 mmc host ip is compatible with MT8183.
Add support for this.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 21a2fce5b7ba..093db1c33653 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -29,26 +29,37 @@ properties:
- items:
- const: mediatek,mt7623-mmc
- const: mediatek,mt2701-mmc
+ - items:
+ - const: mediatek,mt8192-mmc
+ - const: mediatek,mt8183-mmc
clocks:
description:
Should contain phandle for the clock feeding the MMC controller.
minItems: 2
- maxItems: 4
+ maxItems: 8
items:
- description: source clock (required).
- description: HCLK which used for host (required).
- description: independent source clock gate (required for MT2712).
- description: bus clock used for internal register access (required for MT2712 MSDC0/3).
+ - description: msdc subsys clock gate (required for MT8192).
+ - description: peripheral bus clock gate (required for MT8192).
+ - description: AXI bus clock gate (required for MT8192).
+ - description: AHB bus clock gate (required for MT8192).
clock-names:
minItems: 2
- maxItems: 4
+ maxItems: 8
items:
- const: source
- const: hclk
- const: source_cg
- const: bus_clk
+ - const: sys_cg
+ - const: pclk_cg
+ - const: axi_cg
+ - const: ahb_cg
pinctrl-names:
items:
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v6 2/4] mmc: dt-bindings: add support for MT8192 SoC
2020-10-12 12:45 ` [PATCH v6 2/4] mmc: dt-bindings: add support for MT8192 SoC Wenbin Mei
@ 2020-10-13 16:57 ` Rob Herring
0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2020-10-13 16:57 UTC (permalink / raw)
To: Wenbin Mei
Cc: devicetree, Ulf Hansson, srv_heupstream, linux-mmc, linux-kernel,
Rob Herring, linux-mediatek, Chaotian Jing, Matthias Brugger,
linux-arm-kernel
On Mon, 12 Oct 2020 20:45:45 +0800, Wenbin Mei wrote:
> MT8192 mmc host ip is compatible with MT8183.
> Add support for this.
>
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v6 3/4] arm64: dts: mt8192: add mmc device node
2020-10-12 12:45 [PATCH v6 0/4] Add mmc support for MT8192 SoC Wenbin Mei
2020-10-12 12:45 ` [PATCH v6 1/4] dt-bindings: mmc: Convert mtk-sd to json-schema Wenbin Mei
2020-10-12 12:45 ` [PATCH v6 2/4] mmc: dt-bindings: add support for MT8192 SoC Wenbin Mei
@ 2020-10-12 12:45 ` Wenbin Mei
2020-10-12 12:45 ` [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc Wenbin Mei
3 siblings, 0 replies; 13+ messages in thread
From: Wenbin Mei @ 2020-10-12 12:45 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring
Cc: devicetree, Wenbin Mei, srv_heupstream, linux-mmc, linux-kernel,
linux-mediatek, Chaotian Jing, Matthias Brugger,
linux-arm-kernel
This commit adds mmc device node for mt8192
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 89 +++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 34 ++++++++
2 files changed, 123 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
index 0205837fa698..a4279fa87c2b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
@@ -5,6 +5,7 @@
*/
/dts-v1/;
#include "mt8192.dtsi"
+#include "mt6359.dtsi"
/ {
model = "MediaTek MT8192 evaluation board";
@@ -27,3 +28,91 @@
&uart0 {
status = "okay";
};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ supports-cqe;
+ cap-mmc-hw-reset;
+ no-sdio;
+ no-sd;
+ hs400-ds-delay = <0x12814>;
+ vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+ vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+ non-removable;
+};
+
+&pio {
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strenth = <3>;
+ mediatek,pull-up-adv = <1>;
+ };
+
+ pins_clk {
+ pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+ drive-strenth = <3>;
+ mediatek,pull-down-adv = <2>;
+ };
+
+ pins_rst {
+ pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+ drive-strenth = <3>;
+ mediatek,pull-up-adv = <1>;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0@0{
+ pins_cmd_dat {
+ pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strenth = <4>;
+ mediatek,pull-up-adv = <1>;
+ };
+
+ pins_clk {
+ pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+ drive-strenth = <4>;
+ mediatek,pull-down-adv = <2>;
+ };
+
+ pins_ds {
+ pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
+ drive-strenth = <4>;
+ mediatek,pull-down-adv = <2>;
+ };
+
+ pins_rst {
+ pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+ drive-strenth = <3>;
+ mediatek,pull-up-adv = <1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index faea0d97c2a9..de3d10c0eeef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -760,6 +760,40 @@
#clock-cells = <1>;
};
+ mmc0: mmc@11f60000 {
+ compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11f60000 0 0x1000>,
+ <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+ <&msdc_top CLK_MSDC_TOP_H_MST_0P>,
+ <&msdc_top CLK_MSDC_TOP_SRC_0P>,
+ <&msdc_top CLK_MSDC_TOP_P_CFG>,
+ <&msdc_top CLK_MSDC_TOP_P_MSDC0>,
+ <&msdc_top CLK_MSDC_TOP_AXI>,
+ <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+ clock-names = "source", "hclk", "source_cg", "sys_cg",
+ "pclk_cg", "axi_cg", "ahb_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11f70000 {
+ compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11f70000 0 0x1000>,
+ <0 0x11c70000 0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+ <&msdc_top CLK_MSDC_TOP_H_MST_1P>,
+ <&msdc_top CLK_MSDC_TOP_SRC_1P>,
+ <&msdc_top CLK_MSDC_TOP_P_CFG>,
+ <&msdc_top CLK_MSDC_TOP_P_MSDC1>,
+ <&msdc_top CLK_MSDC_TOP_AXI>,
+ <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+ clock-names = "source", "hclk", "source_cg", "sys_cg",
+ "pclk_cg", "axi_cg", "ahb_cg";
+ status = "disabled";
+ };
+
mfgcfg: syscon@13fbf000 {
compatible = "mediatek,mt8192-mfgcfg", "syscon";
reg = <0 0x13fbf000 0 0x1000>;
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-12 12:45 [PATCH v6 0/4] Add mmc support for MT8192 SoC Wenbin Mei
` (2 preceding siblings ...)
2020-10-12 12:45 ` [PATCH v6 3/4] arm64: dts: mt8192: add mmc device node Wenbin Mei
@ 2020-10-12 12:45 ` Wenbin Mei
2020-10-13 9:59 ` Nicolas Boichat
2020-10-13 15:10 ` Matthias Brugger
3 siblings, 2 replies; 13+ messages in thread
From: Wenbin Mei @ 2020-10-12 12:45 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring
Cc: devicetree, Wenbin Mei, srv_heupstream, linux-mmc, linux-kernel,
linux-mediatek, Chaotian Jing, Matthias Brugger,
linux-arm-kernel
MT8192 msdc is an independent sub system, we need control more bus
clocks for it.
Add support for the additional subsys clocks to allow it to be
configured appropriately.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
1 file changed, 56 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index a704745e5882..c7df7510f120 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -35,6 +35,7 @@
#include "cqhci.h"
#define MAX_BD_NUM 1024
+#define MSDC_NR_CLOCKS 3
/*--------------------------------------------------------------------------*/
/* Common Definition */
@@ -425,6 +426,8 @@ struct msdc_host {
struct clk *h_clk; /* msdc h_clk */
struct clk *bus_clk; /* bus clock which used to access register */
struct clk *src_clk_cg; /* msdc source clock control gate */
+ struct clk *sys_clk_cg; /* msdc subsys clock control gate */
+ struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
u32 mclk; /* mmc subsystem clock frequency */
u32 src_clk_freq; /* source clock frequency */
unsigned char timing;
@@ -784,6 +787,7 @@ static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
static void msdc_gate_clock(struct msdc_host *host)
{
+ clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
clk_disable_unprepare(host->src_clk_cg);
clk_disable_unprepare(host->src_clk);
clk_disable_unprepare(host->bus_clk);
@@ -792,10 +796,18 @@ static void msdc_gate_clock(struct msdc_host *host)
static void msdc_ungate_clock(struct msdc_host *host)
{
+ int ret;
+
clk_prepare_enable(host->h_clk);
clk_prepare_enable(host->bus_clk);
clk_prepare_enable(host->src_clk);
clk_prepare_enable(host->src_clk_cg);
+ ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
+ if (ret) {
+ dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
+ return;
+ }
+
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
}
@@ -2366,6 +2378,48 @@ static void msdc_of_property_parse(struct platform_device *pdev,
host->cqhci = false;
}
+static int msdc_of_clock_parse(struct platform_device *pdev,
+ struct msdc_host *host)
+{
+ int ret;
+
+ host->src_clk = devm_clk_get(&pdev->dev, "source");
+ if (IS_ERR(host->src_clk))
+ return PTR_ERR(host->src_clk);
+
+ host->h_clk = devm_clk_get(&pdev->dev, "hclk");
+ if (IS_ERR(host->h_clk))
+ return PTR_ERR(host->h_clk);
+
+ host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
+ if (IS_ERR(host->bus_clk))
+ host->bus_clk = NULL;
+
+ /*source clock control gate is optional clock*/
+ host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
+ if (IS_ERR(host->src_clk_cg))
+ host->src_clk_cg = NULL;
+
+ host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
+ if (IS_ERR(host->sys_clk_cg))
+ host->sys_clk_cg = NULL;
+
+ /* If present, always enable for this clock gate */
+ clk_prepare_enable(host->sys_clk_cg);
+
+ host->bulk_clks[0].id = "pclk_cg";
+ host->bulk_clks[1].id = "axi_cg";
+ host->bulk_clks[2].id = "ahb_cg";
+ ret = devm_clk_bulk_get_optional(&pdev->dev, MSDC_NR_CLOCKS,
+ host->bulk_clks);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot get pclk/axi/ahb clock gates\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static int msdc_drv_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
@@ -2405,25 +2459,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
if (ret)
goto host_free;
- host->src_clk = devm_clk_get(&pdev->dev, "source");
- if (IS_ERR(host->src_clk)) {
- ret = PTR_ERR(host->src_clk);
- goto host_free;
- }
-
- host->h_clk = devm_clk_get(&pdev->dev, "hclk");
- if (IS_ERR(host->h_clk)) {
- ret = PTR_ERR(host->h_clk);
+ ret = msdc_of_clock_parse(pdev, host);
+ if (ret)
goto host_free;
- }
-
- host->bus_clk = devm_clk_get(&pdev->dev, "bus_clk");
- if (IS_ERR(host->bus_clk))
- host->bus_clk = NULL;
- /*source clock control gate is optional clock*/
- host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
- if (IS_ERR(host->src_clk_cg))
- host->src_clk_cg = NULL;
host->reset = devm_reset_control_get_optional_exclusive(&pdev->dev,
"hrst");
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-12 12:45 ` [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc Wenbin Mei
@ 2020-10-13 9:59 ` Nicolas Boichat
2020-10-13 15:10 ` Matthias Brugger
1 sibling, 0 replies; 13+ messages in thread
From: Nicolas Boichat @ 2020-10-13 9:59 UTC (permalink / raw)
To: Wenbin Mei
Cc: Devicetree List, Ulf Hansson, srv_heupstream, linux-mmc, lkml,
Rob Herring, moderated list:ARM/Mediatek SoC support,
linux-arm Mailing List, Matthias Brugger, Chaotian Jing
On Mon, Oct 12, 2020 at 8:46 PM Wenbin Mei <wenbin.mei@mediatek.com> wrote:
>
> MT8192 msdc is an independent sub system, we need control more bus
> clocks for it.
> Add support for the additional subsys clocks to allow it to be
> configured appropriately.
>
Looks ok now, but I'd still like to see 1 or 2 follow-up patches that:
1. In msdc_ungate_clock: check all clk_prepare_enable return values
before busy looping (to be consistent with how you now handle
bulk_clks)
2. In msdc_of_clock_parse: All these if(IS_ERR(clk)) clk = NULL;
should be replaced by if (IS_ERR(clk)) return PTR_ERR(clk);
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
> 1 file changed, 56 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index a704745e5882..c7df7510f120 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -35,6 +35,7 @@
> #include "cqhci.h"
>
> #define MAX_BD_NUM 1024
> +#define MSDC_NR_CLOCKS 3
>
> /*--------------------------------------------------------------------------*/
> /* Common Definition */
> @@ -425,6 +426,8 @@ struct msdc_host {
> struct clk *h_clk; /* msdc h_clk */
> struct clk *bus_clk; /* bus clock which used to access register */
> struct clk *src_clk_cg; /* msdc source clock control gate */
> + struct clk *sys_clk_cg; /* msdc subsys clock control gate */
> + struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
> u32 mclk; /* mmc subsystem clock frequency */
> u32 src_clk_freq; /* source clock frequency */
> unsigned char timing;
> @@ -784,6 +787,7 @@ static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
>
> static void msdc_gate_clock(struct msdc_host *host)
> {
> + clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
> clk_disable_unprepare(host->src_clk_cg);
> clk_disable_unprepare(host->src_clk);
> clk_disable_unprepare(host->bus_clk);
> @@ -792,10 +796,18 @@ static void msdc_gate_clock(struct msdc_host *host)
>
> static void msdc_ungate_clock(struct msdc_host *host)
> {
> + int ret;
> +
> clk_prepare_enable(host->h_clk);
> clk_prepare_enable(host->bus_clk);
> clk_prepare_enable(host->src_clk);
> clk_prepare_enable(host->src_clk_cg);
> + ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
> + if (ret) {
> + dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
> + return;
> + }
> +
> while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> cpu_relax();
> }
> @@ -2366,6 +2378,48 @@ static void msdc_of_property_parse(struct platform_device *pdev,
> host->cqhci = false;
> }
>
> +static int msdc_of_clock_parse(struct platform_device *pdev,
> + struct msdc_host *host)
> +{
> + int ret;
> +
> + host->src_clk = devm_clk_get(&pdev->dev, "source");
> + if (IS_ERR(host->src_clk))
> + return PTR_ERR(host->src_clk);
> +
> + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> + if (IS_ERR(host->h_clk))
> + return PTR_ERR(host->h_clk);
> +
> + host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
> + if (IS_ERR(host->bus_clk))
> + host->bus_clk = NULL;
> +
> + /*source clock control gate is optional clock*/
> + host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
> + if (IS_ERR(host->src_clk_cg))
> + host->src_clk_cg = NULL;
> +
> + host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
> + if (IS_ERR(host->sys_clk_cg))
> + host->sys_clk_cg = NULL;
> +
> + /* If present, always enable for this clock gate */
> + clk_prepare_enable(host->sys_clk_cg);
> +
> + host->bulk_clks[0].id = "pclk_cg";
> + host->bulk_clks[1].id = "axi_cg";
> + host->bulk_clks[2].id = "ahb_cg";
> + ret = devm_clk_bulk_get_optional(&pdev->dev, MSDC_NR_CLOCKS,
> + host->bulk_clks);
> + if (ret) {
> + dev_err(&pdev->dev, "Cannot get pclk/axi/ahb clock gates\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static int msdc_drv_probe(struct platform_device *pdev)
> {
> struct mmc_host *mmc;
> @@ -2405,25 +2459,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
> if (ret)
> goto host_free;
>
> - host->src_clk = devm_clk_get(&pdev->dev, "source");
> - if (IS_ERR(host->src_clk)) {
> - ret = PTR_ERR(host->src_clk);
> - goto host_free;
> - }
> -
> - host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> - if (IS_ERR(host->h_clk)) {
> - ret = PTR_ERR(host->h_clk);
> + ret = msdc_of_clock_parse(pdev, host);
> + if (ret)
> goto host_free;
> - }
> -
> - host->bus_clk = devm_clk_get(&pdev->dev, "bus_clk");
> - if (IS_ERR(host->bus_clk))
> - host->bus_clk = NULL;
> - /*source clock control gate is optional clock*/
> - host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
> - if (IS_ERR(host->src_clk_cg))
> - host->src_clk_cg = NULL;
>
> host->reset = devm_reset_control_get_optional_exclusive(&pdev->dev,
> "hrst");
> --
> 2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-12 12:45 ` [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc Wenbin Mei
2020-10-13 9:59 ` Nicolas Boichat
@ 2020-10-13 15:10 ` Matthias Brugger
2020-10-14 2:28 ` Wenbin Mei
1 sibling, 1 reply; 13+ messages in thread
From: Matthias Brugger @ 2020-10-13 15:10 UTC (permalink / raw)
To: Wenbin Mei, Ulf Hansson, Rob Herring
Cc: devicetree, srv_heupstream, linux-mmc, linux-kernel,
linux-mediatek, Chaotian Jing, linux-arm-kernel
On 12/10/2020 14:45, Wenbin Mei wrote:
> MT8192 msdc is an independent sub system, we need control more bus
> clocks for it.
> Add support for the additional subsys clocks to allow it to be
> configured appropriately.
>
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> ---
> drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
> 1 file changed, 56 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index a704745e5882..c7df7510f120 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
[...]
> +static int msdc_of_clock_parse(struct platform_device *pdev,
> + struct msdc_host *host)
> +{
> + int ret;
> +
> + host->src_clk = devm_clk_get(&pdev->dev, "source");
> + if (IS_ERR(host->src_clk))
> + return PTR_ERR(host->src_clk);
> +
> + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> + if (IS_ERR(host->h_clk))
> + return PTR_ERR(host->h_clk);
> +
> + host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
> + if (IS_ERR(host->bus_clk))
> + host->bus_clk = NULL;
> +
> + /*source clock control gate is optional clock*/
> + host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
> + if (IS_ERR(host->src_clk_cg))
> + host->src_clk_cg = NULL;
> +
> + host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
> + if (IS_ERR(host->sys_clk_cg))
> + host->sys_clk_cg = NULL;
> +
> + /* If present, always enable for this clock gate */
> + clk_prepare_enable(host->sys_clk_cg);
> +
> + host->bulk_clks[0].id = "pclk_cg";
> + host->bulk_clks[1].id = "axi_cg";
> + host->bulk_clks[2].id = "ahb_cg";
That looks at least suspicious. The pointers of id point to some strings defined
in the function. Aren't they out of scope once msdc_of_clock_parse() has returned?
Regards,
Matthias
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-13 15:10 ` Matthias Brugger
@ 2020-10-14 2:28 ` Wenbin Mei
2020-10-14 3:06 ` Nicolas Boichat
0 siblings, 1 reply; 13+ messages in thread
From: Wenbin Mei @ 2020-10-14 2:28 UTC (permalink / raw)
To: Matthias Brugger
Cc: devicetree, Ulf Hansson, srv_heupstream, linux-mmc, linux-kernel,
Rob Herring, linux-mediatek, Chaotian Jing, linux-arm-kernel
On Tue, 2020-10-13 at 17:10 +0200, Matthias Brugger wrote:
>
> On 12/10/2020 14:45, Wenbin Mei wrote:
> > MT8192 msdc is an independent sub system, we need control more bus
> > clocks for it.
> > Add support for the additional subsys clocks to allow it to be
> > configured appropriately.
> >
> > Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> > ---
> > drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
> > 1 file changed, 56 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > index a704745e5882..c7df7510f120 100644
> > --- a/drivers/mmc/host/mtk-sd.c
> > +++ b/drivers/mmc/host/mtk-sd.c
> [...]
> > +static int msdc_of_clock_parse(struct platform_device *pdev,
> > + struct msdc_host *host)
> > +{
> > + int ret;
> > +
> > + host->src_clk = devm_clk_get(&pdev->dev, "source");
> > + if (IS_ERR(host->src_clk))
> > + return PTR_ERR(host->src_clk);
> > +
> > + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> > + if (IS_ERR(host->h_clk))
> > + return PTR_ERR(host->h_clk);
> > +
> > + host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
> > + if (IS_ERR(host->bus_clk))
> > + host->bus_clk = NULL;
> > +
> > + /*source clock control gate is optional clock*/
> > + host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
> > + if (IS_ERR(host->src_clk_cg))
> > + host->src_clk_cg = NULL;
> > +
> > + host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
> > + if (IS_ERR(host->sys_clk_cg))
> > + host->sys_clk_cg = NULL;
> > +
> > + /* If present, always enable for this clock gate */
> > + clk_prepare_enable(host->sys_clk_cg);
> > +
> > + host->bulk_clks[0].id = "pclk_cg";
> > + host->bulk_clks[1].id = "axi_cg";
> > + host->bulk_clks[2].id = "ahb_cg";
>
> That looks at least suspicious. The pointers of id point to some strings defined
> in the function. Aren't they out of scope once msdc_of_clock_parse() has returned?
>
These constants are not in stack range, so they will not be lost.
And I have confirmed it after msdc_of_clock_parse() has returned, these
ids still exist.
> Regards,
> Matthias
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-14 2:28 ` Wenbin Mei
@ 2020-10-14 3:06 ` Nicolas Boichat
2020-10-14 7:44 ` Matthias Brugger
0 siblings, 1 reply; 13+ messages in thread
From: Nicolas Boichat @ 2020-10-14 3:06 UTC (permalink / raw)
To: Wenbin Mei
Cc: Devicetree List, Ulf Hansson, srv_heupstream, linux-mmc, lkml,
Rob Herring, moderated list:ARM/Mediatek SoC support,
linux-arm Mailing List, Matthias Brugger, Chaotian Jing
On Wed, Oct 14, 2020 at 10:29 AM Wenbin Mei <wenbin.mei@mediatek.com> wrote:
>
> On Tue, 2020-10-13 at 17:10 +0200, Matthias Brugger wrote:
> >
> > On 12/10/2020 14:45, Wenbin Mei wrote:
> > > MT8192 msdc is an independent sub system, we need control more bus
> > > clocks for it.
> > > Add support for the additional subsys clocks to allow it to be
> > > configured appropriately.
> > >
> > > Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> > > ---
> > > drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
> > > 1 file changed, 56 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > > index a704745e5882..c7df7510f120 100644
> > > --- a/drivers/mmc/host/mtk-sd.c
> > > +++ b/drivers/mmc/host/mtk-sd.c
> > [...]
> > > +static int msdc_of_clock_parse(struct platform_device *pdev,
> > > + struct msdc_host *host)
> > > +{
> > > + int ret;
> > > +
> > > + host->src_clk = devm_clk_get(&pdev->dev, "source");
> > > + if (IS_ERR(host->src_clk))
> > > + return PTR_ERR(host->src_clk);
> > > +
> > > + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
> > > + if (IS_ERR(host->h_clk))
> > > + return PTR_ERR(host->h_clk);
> > > +
> > > + host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
> > > + if (IS_ERR(host->bus_clk))
> > > + host->bus_clk = NULL;
> > > +
> > > + /*source clock control gate is optional clock*/
> > > + host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
> > > + if (IS_ERR(host->src_clk_cg))
> > > + host->src_clk_cg = NULL;
> > > +
> > > + host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
> > > + if (IS_ERR(host->sys_clk_cg))
> > > + host->sys_clk_cg = NULL;
> > > +
> > > + /* If present, always enable for this clock gate */
> > > + clk_prepare_enable(host->sys_clk_cg);
> > > +
> > > + host->bulk_clks[0].id = "pclk_cg";
> > > + host->bulk_clks[1].id = "axi_cg";
> > > + host->bulk_clks[2].id = "ahb_cg";
> >
> > That looks at least suspicious. The pointers of id point to some strings defined
> > in the function. Aren't they out of scope once msdc_of_clock_parse() has returned?
> >
> These constants are not in stack range, so they will not be lost.
> And I have confirmed it after msdc_of_clock_parse() has returned, these
> ids still exist.
Yes I guess the constants end up in .rodata (or similar section), but
I'm not sure if this is absolutely guaranteed.
In any case, this is a commonly used pattern, so I'd hope it's fine
(just a sample, there are more):
https://elixir.bootlin.com/linux/latest/source/drivers/pci/controller/dwc/pcie-qcom.c#L266
https://elixir.bootlin.com/linux/latest/source/sound/soc/codecs/wm8994.c#L4638
https://elixir.bootlin.com/linux/latest/source/drivers/mfd/madera-core.c#L467
https://elixir.bootlin.com/linux/latest/source/drivers/gpio/gpio-dwapb.c#L675
>
> > Regards,
> > Matthias
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-14 3:06 ` Nicolas Boichat
@ 2020-10-14 7:44 ` Matthias Brugger
2020-10-14 8:01 ` Nicolas Boichat
0 siblings, 1 reply; 13+ messages in thread
From: Matthias Brugger @ 2020-10-14 7:44 UTC (permalink / raw)
To: Nicolas Boichat, Wenbin Mei
Cc: Devicetree List, Ulf Hansson, srv_heupstream, linux-mmc, lkml,
Rob Herring, moderated list:ARM/Mediatek SoC support,
Chaotian Jing, linux-arm Mailing List
On 14/10/2020 05:06, Nicolas Boichat wrote:
> On Wed, Oct 14, 2020 at 10:29 AM Wenbin Mei <wenbin.mei@mediatek.com> wrote:
>>
>> On Tue, 2020-10-13 at 17:10 +0200, Matthias Brugger wrote:
>>>
>>> On 12/10/2020 14:45, Wenbin Mei wrote:
>>>> MT8192 msdc is an independent sub system, we need control more bus
>>>> clocks for it.
>>>> Add support for the additional subsys clocks to allow it to be
>>>> configured appropriately.
>>>>
>>>> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
>>>> ---
>>>> drivers/mmc/host/mtk-sd.c | 74 +++++++++++++++++++++++++++++----------
>>>> 1 file changed, 56 insertions(+), 18 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
>>>> index a704745e5882..c7df7510f120 100644
>>>> --- a/drivers/mmc/host/mtk-sd.c
>>>> +++ b/drivers/mmc/host/mtk-sd.c
>>> [...]
>>>> +static int msdc_of_clock_parse(struct platform_device *pdev,
>>>> + struct msdc_host *host)
>>>> +{
>>>> + int ret;
>>>> +
>>>> + host->src_clk = devm_clk_get(&pdev->dev, "source");
>>>> + if (IS_ERR(host->src_clk))
>>>> + return PTR_ERR(host->src_clk);
>>>> +
>>>> + host->h_clk = devm_clk_get(&pdev->dev, "hclk");
>>>> + if (IS_ERR(host->h_clk))
>>>> + return PTR_ERR(host->h_clk);
>>>> +
>>>> + host->bus_clk = devm_clk_get_optional(&pdev->dev, "bus_clk");
>>>> + if (IS_ERR(host->bus_clk))
>>>> + host->bus_clk = NULL;
>>>> +
>>>> + /*source clock control gate is optional clock*/
>>>> + host->src_clk_cg = devm_clk_get_optional(&pdev->dev, "source_cg");
>>>> + if (IS_ERR(host->src_clk_cg))
>>>> + host->src_clk_cg = NULL;
>>>> +
>>>> + host->sys_clk_cg = devm_clk_get_optional(&pdev->dev, "sys_cg");
>>>> + if (IS_ERR(host->sys_clk_cg))
>>>> + host->sys_clk_cg = NULL;
>>>> +
>>>> + /* If present, always enable for this clock gate */
>>>> + clk_prepare_enable(host->sys_clk_cg);
>>>> +
>>>> + host->bulk_clks[0].id = "pclk_cg";
>>>> + host->bulk_clks[1].id = "axi_cg";
>>>> + host->bulk_clks[2].id = "ahb_cg";
>>>
>>> That looks at least suspicious. The pointers of id point to some strings defined
>>> in the function. Aren't they out of scope once msdc_of_clock_parse() has returned?
>>>
>> These constants are not in stack range, so they will not be lost.
>> And I have confirmed it after msdc_of_clock_parse() has returned, these
>> ids still exist.
>
> Yes I guess the constants end up in .rodata (or similar section), but
> I'm not sure if this is absolutely guaranteed.
>
> In any case, this is a commonly used pattern, so I'd hope it's fine
> (just a sample, there are more):
> https://elixir.bootlin.com/linux/latest/source/drivers/pci/controller/dwc/pcie-qcom.c#L266
> https://elixir.bootlin.com/linux/latest/source/sound/soc/codecs/wm8994.c#L4638
> https://elixir.bootlin.com/linux/latest/source/drivers/mfd/madera-core.c#L467
> https://elixir.bootlin.com/linux/latest/source/drivers/gpio/gpio-dwapb.c#L675
>
Alright, then this looks good, sorry for the noise!
Matthias
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v6 4/4] mmc: mediatek: Add subsys clock control for MT8192 msdc
2020-10-14 7:44 ` Matthias Brugger
@ 2020-10-14 8:01 ` Nicolas Boichat
0 siblings, 0 replies; 13+ messages in thread
From: Nicolas Boichat @ 2020-10-14 8:01 UTC (permalink / raw)
To: Matthias Brugger
Cc: Devicetree List, Ulf Hansson, srv_heupstream, Wenbin Mei,
linux-mmc, lkml, Rob Herring,
moderated list:ARM/Mediatek SoC support, linux-arm Mailing List,
Chaotian Jing
On Wed, Oct 14, 2020 at 3:44 PM Matthias Brugger <matthias.bgg@gmail.com> wrote:
>
>
>
> On 14/10/2020 05:06, Nicolas Boichat wrote:
> > On Wed, Oct 14, 2020 at 10:29 AM Wenbin Mei <wenbin.mei@mediatek.com> wrote:
> >>
> >> On Tue, 2020-10-13 at 17:10 +0200, Matthias Brugger wrote:
> >>>
> >>> On 12/10/2020 14:45, Wenbin Mei wrote:
> >>>> MT8192 msdc is an independent sub system, we need control more bus
> >>>> clocks for it.
> >>>> Add support for the additional subsys clocks to allow it to be
> >>>> configured appropriately.
> >>>>
> >>>> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
[...]
> >>>> + host->bulk_clks[0].id = "pclk_cg";
> >>>> + host->bulk_clks[1].id = "axi_cg";
> >>>> + host->bulk_clks[2].id = "ahb_cg";
> >>>
> >>> That looks at least suspicious. The pointers of id point to some strings defined
> >>> in the function. Aren't they out of scope once msdc_of_clock_parse() has returned?
> >>>
> >> These constants are not in stack range, so they will not be lost.
> >> And I have confirmed it after msdc_of_clock_parse() has returned, these
> >> ids still exist.
> >
> > Yes I guess the constants end up in .rodata (or similar section), but
> > I'm not sure if this is absolutely guaranteed.
> >
> > In any case, this is a commonly used pattern, so I'd hope it's fine
> > (just a sample, there are more):
> > https://elixir.bootlin.com/linux/latest/source/drivers/pci/controller/dwc/pcie-qcom.c#L266
> > https://elixir.bootlin.com/linux/latest/source/sound/soc/codecs/wm8994.c#L4638
> > https://elixir.bootlin.com/linux/latest/source/drivers/mfd/madera-core.c#L467
> > https://elixir.bootlin.com/linux/latest/source/drivers/gpio/gpio-dwapb.c#L675
> >
>
> Alright, then this looks good, sorry for the noise!
To close this in more satisfying way, I asked internally, and +Pi-Hsun
Shih digged out this answer:
"""
C11 standard 6.4.5 String literals says: "The multibyte character
sequence is then used to initialize an array of >>static storage
duration<< and length just sufficient to contain the sequence"
"""
> Matthias
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 13+ messages in thread