From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.7 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH, MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,UNPARSEABLE_RELAY, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 167CCC433DF for ; Wed, 14 Oct 2020 01:47:15 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 90FCF21D7F for ; Wed, 14 Oct 2020 01:47:14 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="YQq/JibG"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mediatek.com header.i=@mediatek.com header.b="QyfGV940" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 90FCF21D7F Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:Message-ID:Date:Subject:To:From: Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender :Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References:List-Owner; bh=h0iGJXEPAjYYfh/Qsg3b9+Pl36Nm/Wgnh+vnRhd9u8U=; b=YQq/JibGQog7sGlQtP1jZPvvW+ sjwf+XfVQ+TkF2ioRO7p1L0fwq83CVGp4KMH71p/thIa5kUmzTeRv7xe/Oie1mptlrfRYc7S74frL hxMzX6M64I3jMWfIpUmDMYA8DkvCZ6VnnmyhkexO5KzoUYJxDTof9Y3o2VpBw/es/wVzSnSxjDYv5 1q9+hX24woSmkwqXkOJRfp+S/8qd2wpMPJtyAhDi0ig+DuitkWpsHQk+0rk8owVTmKkSIFT8hHjb8 v8+sgGOeMFrq0xRyS1kS7sQNlS754b3sDerXV7DAVYMzloYm4wUMHdp7VsrRB0k0cG6qSv/7uWk+p x9BlwJmw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kSVsg-0007g5-39; Wed, 14 Oct 2020 01:47:06 +0000 Received: from mailgw02.mediatek.com ([216.200.240.185]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kSVsc-0007ej-P1 for linux-mediatek@lists.infradead.org; Wed, 14 Oct 2020 01:47:04 +0000 X-UUID: 96bb2b03d7a7491c99dbb72670b14bc3-20201013 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:Message-ID:Date:Subject:CC:To:From; bh=Bc/fiIj0WlfNiYPnaqYlSE5KgD2Ldf+jTT1I1/vW7h8=; b=QyfGV940OtbrM5+cJ+4uW8HUDxhhrs80GHvdCwiMASs8b9gc8/QxGXth6UvxTq1YqXmLPEjj+xe3FkhMYAyrd7BQY7EjZfm0JFobqBjH02chI3A5XSh8IF7ntsuNWg0SoPqCnchXXt+6aijUniQ72xgQfC0fNVFp8Q6pjEEXU5s=; X-UUID: 96bb2b03d7a7491c99dbb72670b14bc3-20201013 Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by mailgw02.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 2061506047; Tue, 13 Oct 2020 17:46:59 -0800 Received: from MTKMBS07N2.mediatek.inc (172.21.101.141) by MTKMBS62N1.mediatek.inc (172.29.193.41) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Tue, 13 Oct 2020 18:44:42 -0700 Received: from mtkcas08.mediatek.inc (172.21.101.126) by mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 14 Oct 2020 09:44:41 +0800 Received: from mtkslt301.mediatek.inc (10.21.14.114) by mtkcas08.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Wed, 14 Oct 2020 09:44:41 +0800 From: Chunfeng Yun To: Subject: [PATCH v2 1/8] dt-bindings: phy: convert phy-mtk-xsphy.txt to YAML schema Date: Wed, 14 Oct 2020 09:44:27 +0800 Message-ID: <20201014014434.62239-1-chunfeng.yun@mediatek.com> X-Mailer: git-send-email 2.18.0 MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201013_214703_201107_382C0A9D X-CRM114-Status: GOOD ( 19.07 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Chunfeng Yun , srv_heupstream@mediatek.com Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org Convert phy-mtk-xsphy.txt to YAML schema mediatek,xsphy.yaml Signed-off-by: Chunfeng Yun --- v2: modify description and compatible definition suggested by Rob --- .../bindings/phy/mediatek,xsphy.yaml | 200 ++++++++++++++++++ .../devicetree/bindings/phy/phy-mtk-xsphy.txt | 109 ---------- 2 files changed, 200 insertions(+), 109 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml new file mode 100644 index 000000000000..86511f19277a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek XS-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun + +description: | + The XS-PHY controller supports physical layer functionality for USB3.1 + GEN2 controller on MediaTek SoCs. + + Banks layout of xsphy + ---------------------------------- + port offset bank + u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM + u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM + u2 port2 0x2000 MISC + ... + u31 common 0x3000 DIG_GLB + 0x3100 PHYA_GLB + u31 port0 0x3400 DIG_LN_TOP + 0x3500 DIG_LN_TX0 + 0x3600 DIG_LN_RX0 + 0x3700 DIG_LN_DAIF + 0x3800 PHYA_LN + u31 port1 0x3a00 DIG_LN_TOP + 0x3b00 DIG_LN_TX0 + 0x3c00 DIG_LN_RX0 + 0x3d00 DIG_LN_DAIF + 0x3e00 PHYA_LN + ... + DIG_GLB & PHYA_GLB are shared by U31 ports. + +properties: + $nodename: + pattern: "^xs-phy@[0-9a-f]+$" + + compatible: + items: + - enum: + - mediatek,mt3611-xsphy + - mediatek,mt3612-xsphy + - const: mediatek,xsphy + + reg: + description: | + Register shared by multiple U3 ports, exclude port's private register, + if only U2 ports provided, shouldn't use the property. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + $ref: /schemas/types.yaml#/definitions/uint32 + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 17 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: | + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + + clock-names: + items: + - const: ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + + #The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,efuse-intr: + description: + The selection of Internal Resistor (U2/U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 63 + + mediatek,efuse-tx-imp: + description: + The selection of TX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,efuse-rx-imp: + description: + The selection of RX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + required: + - reg + - clocks + - clock-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include + + u3phy: xs-phy@11c40000 { + compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; + reg = <0x11c43000 0x0200>; + mediatek,src-ref-clk-mhz = <26>; + mediatek,src-coef = <17>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + u2port0: usb-phy@11c40000 { + reg = <0x11c40000 0x0400>; + clocks = <&clk48m>; + clock-names = "ref"; + mediatek,eye-src = <4>; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11c43000 { + reg = <0x11c43400 0x0500>; + clocks = <&clk26m>; + clock-names = "ref"; + mediatek,efuse-intr = <28>; + #phy-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt deleted file mode 100644 index e7caefa0b9c2..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt +++ /dev/null @@ -1,109 +0,0 @@ -MediaTek XS-PHY binding --------------------------- - -The XS-PHY controller supports physical layer functionality for USB3.1 -GEN2 controller on MediaTek SoCs. - -Required properties (controller (parent) node): - - compatible : should be "mediatek,-xsphy", "mediatek,xsphy", - soc-model is the name of SoC, such as mt3611 etc; - when using "mediatek,xsphy" compatible string, you need SoC specific - ones in addition, one of: - - "mediatek,mt3611-xsphy" - - - #address-cells, #size-cells : should use the same values as the root node - - ranges: must be present - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple U3 ports, - exclude port's private register, if only U2 ports provided, - shouldn't use the property. - - mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate - calibrate - - mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on - SoC process - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeedPlus analog phy, sometimes is - 24M, 25M or 27M, depended on platform. -- #phy-cells : should be 1 - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - -The following optional properties are only for debug or HQA test -Optional properties (PHY_TYPE_USB2 port (child) node): -- mediatek,eye-src : u32, the value of slew rate calibrate -- mediatek,eye-vrt : u32, the selection of VRT reference voltage -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- mediatek,efuse-intr : u32, the selection of Internal Resistor - -Optional properties (PHY_TYPE_USB3 port (child) node): -- mediatek,efuse-intr : u32, the selection of Internal Resistor -- mediatek,efuse-tx-imp : u32, the selection of TX Impedance -- mediatek,efuse-rx-imp : u32, the selection of RX Impedance - -Banks layout of xsphy -------------------------------------------------------------- -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u2 port2 0x2000 MISC - ... -u31 common 0x3000 DIG_GLB - 0x3100 PHYA_GLB -u31 port0 0x3400 DIG_LN_TOP - 0x3500 DIG_LN_TX0 - 0x3600 DIG_LN_RX0 - 0x3700 DIG_LN_DAIF - 0x3800 PHYA_LN -u31 port1 0x3a00 DIG_LN_TOP - 0x3b00 DIG_LN_TX0 - 0x3c00 DIG_LN_RX0 - 0x3d00 DIG_LN_DAIF - 0x3e00 PHYA_LN - ... - -DIG_GLB & PHYA_GLB are shared by U31 ports. - -Example: - -u3phy: usb-phy@11c40000 { - compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; - reg = <0 0x11c43000 0 0x0200>; - mediatek,src-ref-clk-mhz = <26>; - mediatek,src-coef = <17>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - u2port0: usb-phy@11c40000 { - reg = <0 0x11c40000 0 0x0400>; - clocks = <&clk48m>; - clock-names = "ref"; - mediatek,eye-src = <4>; - #phy-cells = <1>; - }; - - u3port0: usb-phy@11c43000 { - reg = <0 0x11c43400 0 0x0500>; - clocks = <&clk26m>; - clock-names = "ref"; - mediatek,efuse-intr = <28>; - #phy-cells = <1>; - }; -}; -- 2.18.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek