From: Yong Wu <yong.wu@mediatek.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
"Tomasz Figa" <tfiga@chromium.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>, <anan.sun@mediatek.com>,
<ming-fan.chen@mediatek.com>, <yi.kuo@mediatek.com>,
<anthony.huang@mediatek.com>
Subject: [PATCH 6/9] memory: mtk-smi: Add smi sub common support
Date: Wed, 16 Jun 2021 19:43:43 +0800 [thread overview]
Message-ID: <20210616114346.18812-7-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210616114346.18812-1-yong.wu@mediatek.com>
This patch adds smi-sub-common support. some larbs may connect with the
smi-sub-common, then connect with smi-common.
Before we create device link between smi-larb with smi-common, If we have
sub-common, we should use device link the smi-larb and smi-sub-common,
then use device link between the smi-sub-common with smi-common. This is
for enabling clock/power automatically.
Move the device link code to a new interface for reusing.
there is no SW extra setting for smi-sub-common.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/memory/mtk-smi.c | 78 ++++++++++++++++++++++++++--------------
1 file changed, 52 insertions(+), 26 deletions(-)
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 6858877ac859..fa3a14605dc2 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -60,7 +60,8 @@
enum mtk_smi_type {
MTK_SMI_GEN1,
- MTK_SMI_GEN2
+ MTK_SMI_GEN2, /* gen2 smi common */
+ MTK_SMI_GEN2_SUB_COMM, /* gen2 smi sub common */
};
#define MTK_SMI_CLK_NR_MAX 4
@@ -93,13 +94,14 @@ struct mtk_smi {
void __iomem *smi_ao_base; /* only for gen1 */
void __iomem *base; /* only for gen2 */
};
+ struct device *smi_common_dev; /* for sub common */
const struct mtk_smi_common_plat *plat;
};
struct mtk_smi_larb { /* larb: local arbiter */
struct mtk_smi smi;
void __iomem *base;
- struct device *smi_common_dev;
+ struct device *smi_common_dev; /* common or sub-common dev */
const struct mtk_smi_larb_gen *larb_gen;
int larbid;
u32 *mmu;
@@ -206,6 +208,39 @@ mtk_smi_larb_unbind(struct device *dev, struct device *master, void *data)
/* Do nothing as the iommu is always enabled. */
}
+static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
+{
+ struct platform_device *smi_com_pdev;
+ struct device_node *smi_com_node;
+ struct device *smi_com_dev;
+ struct device_link *link;
+
+ smi_com_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
+ if (!smi_com_node)
+ return -EINVAL;
+
+ smi_com_pdev = of_find_device_by_node(smi_com_node);
+ of_node_put(smi_com_node);
+ if (smi_com_pdev) {
+ /* smi common is the supplier, Make sure it is ready before */
+ if (!platform_get_drvdata(smi_com_pdev))
+ return -EPROBE_DEFER;
+ smi_com_dev = &smi_com_pdev->dev;
+ link = device_link_add(dev, smi_com_dev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link) {
+ dev_err(dev, "Unable to link smi-common dev\n");
+ return -ENODEV;
+ }
+ *com_dev = smi_com_dev;
+ } else {
+ dev_err(dev, "Failed to get the smi_common device\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct component_ops mtk_smi_larb_component_ops = {
.bind = mtk_smi_larb_bind,
.unbind = mtk_smi_larb_unbind,
@@ -267,9 +302,6 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
struct mtk_smi_larb *larb;
struct resource *res;
struct device *dev = &pdev->dev;
- struct device_node *smi_node;
- struct platform_device *smi_pdev;
- struct device_link *link;
int i, ret;
larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
@@ -291,27 +323,9 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
return ret;
larb->smi.dev = dev;
-
- smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
- if (!smi_node)
- return -EINVAL;
-
- smi_pdev = of_find_device_by_node(smi_node);
- of_node_put(smi_node);
- if (smi_pdev) {
- if (!platform_get_drvdata(smi_pdev))
- return -EPROBE_DEFER;
- larb->smi_common_dev = &smi_pdev->dev;
- link = device_link_add(dev, larb->smi_common_dev,
- DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
- if (!link) {
- dev_err(dev, "Unable to link smi-common dev\n");
- return -ENODEV;
- }
- } else {
- dev_err(dev, "Failed to get the smi_common device\n");
- return -EINVAL;
- }
+ ret = mtk_smi_device_link_common(dev, &larb->smi_common_dev);
+ if (ret < 0)
+ return ret;
pm_runtime_enable(dev);
platform_set_drvdata(pdev, larb);
@@ -451,6 +465,14 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
if (IS_ERR(common->base))
return PTR_ERR(common->base);
}
+
+ /* link its smi-common if this is smi-sub-common */
+ if (common->plat->type == MTK_SMI_GEN2_SUB_COMM) {
+ ret = mtk_smi_device_link_common(dev, &common->smi_common_dev);
+ if (ret < 0)
+ return ret;
+ }
+
pm_runtime_enable(dev);
platform_set_drvdata(pdev, common);
return 0;
@@ -458,6 +480,10 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
static int mtk_smi_common_remove(struct platform_device *pdev)
{
+ struct mtk_smi *common = dev_get_drvdata(&pdev->dev);
+
+ if (common->plat->type == MTK_SMI_GEN2_SUB_COMM)
+ device_link_remove(&pdev->dev, common->smi_common_dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2021-06-16 11:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 11:43 [PATCH 0/9] MT8195 SMI support Yong Wu
2021-06-16 11:43 ` [PATCH 1/9] dt-bindings: memory: mediatek: Add mt8195 smi binding Yong Wu
2021-07-08 9:26 ` Krzysztof Kozlowski
2021-07-11 8:24 ` Yong Wu
2021-06-16 11:43 ` [PATCH 2/9] dt-bindings: memory: mediatek: Add mt8195 smi sub common Yong Wu
2021-06-16 11:43 ` [PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops Yong Wu
2021-07-08 9:32 ` Krzysztof Kozlowski
2021-07-11 8:29 ` Yong Wu
2021-07-12 6:44 ` Krzysztof Kozlowski
2021-06-16 11:43 ` [PATCH 4/9] memory: mtk-smi: Rename smi_gen to smi_type Yong Wu
2021-07-08 9:34 ` Krzysztof Kozlowski
2021-07-11 8:24 ` Yong Wu
2021-06-16 11:43 ` [PATCH 5/9] memory: mtk-smi: Adjust some code position Yong Wu
2021-06-16 11:43 ` Yong Wu [this message]
2021-07-08 9:47 ` [PATCH 6/9] memory: mtk-smi: Add smi sub common support Krzysztof Kozlowski
2021-06-16 11:43 ` [PATCH 7/9] memory: mtk-smi: mt8195: Add smi support Yong Wu
2021-06-16 11:43 ` [PATCH 8/9] memory: mtk-smi: mt8195: Add initial setting for smi-common Yong Wu
2021-06-16 11:43 ` [PATCH 9/9] memory: mtk-smi: mt8195: Add initial setting for smi-larb Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616114346.18812-7-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=anthony.huang@mediatek.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=will@kernel.org \
--cc=yi.kuo@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).