From: "Bernhard Rosenkränzer" <bero@baylibre.com>
To: daniel.lezcano@linaro.org,
angelogioacchino.delregno@collabora.com, rafael@kernel.org,
amitk@kernel.org, rui.zhang@intel.com, matthias.bgg@gmail.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
rdunlap@infradead.org, ye.xingchen@zte.com.cn,
p.zabel@pengutronix.de
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
wenst@chromium.org, james.lo@mediatek.com,
rex-bc.chen@mediatek.com, nfraprado@collabora.com,
abailon@baylibre.com, amergnat@baylibre.com,
khilman@baylibre.com
Subject: [PATCH v4 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones
Date: Tue, 30 May 2023 21:51:31 +0200 [thread overview]
Message-ID: <20230530195132.2286163-5-bero@baylibre.com> (raw)
In-Reply-To: <20230530195132.2286163-1-bero@baylibre.com>
From: Balsam CHIHI <bchihi@baylibre.com>
Add thermal nodes and thermal zones for the mt8192.
The mt8192 SoC has several hotspots around the CPUs.
Specify the targeted temperature threshold to apply the mitigation
and define the associated cooling devices.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[bero@baylibre.com: cosmetic changes, reduce lvts_ap size]
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 454 +++++++++++++++++++++++
1 file changed, 454 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 65bc8b4046211..82d6629e38c26 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8192-power.h>
#include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
/ {
compatible = "mediatek,mt8192";
@@ -71,6 +73,7 @@ cpu0: cpu@0 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu1: cpu@100 {
@@ -88,6 +91,7 @@ cpu1: cpu@100 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu2: cpu@200 {
@@ -105,6 +109,7 @@ cpu2: cpu@200 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu3: cpu@300 {
@@ -122,6 +127,7 @@ cpu3: cpu@300 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
+ #cooling-cells = <2>;
};
cpu4: cpu@400 {
@@ -139,6 +145,7 @@ cpu4: cpu@400 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu5: cpu@500 {
@@ -156,6 +163,7 @@ cpu5: cpu@500 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu6: cpu@600 {
@@ -173,6 +181,7 @@ cpu6: cpu@600 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu7: cpu@700 {
@@ -190,6 +199,7 @@ cpu7: cpu@700 {
d-cache-sets = <256>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu-map {
@@ -775,6 +785,17 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8192-lvts-ap";
+ reg = <0 0x1100b000 0 0xc00>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
@@ -1101,6 +1122,17 @@ nor_flash: spi@11234000 {
status = "disabled";
};
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8192-lvts-mcu";
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
efuse: efuse@11c10000 {
compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
reg = <0 0x11c10000 0 0x1000>;
@@ -1827,4 +1859,426 @@ larb2: larb@1f002000 {
power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+ trips {
+ cpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+ trips {
+ cpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+ trips {
+ cpu2_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+ trips {
+ cpu3_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+ trips {
+ cpu4_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+ trips {
+ cpu5_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+ trips {
+ cpu6_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+ trips {
+ cpu7_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ vpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+ trips {
+ vpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ vpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ vpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+ trips {
+ vpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ vpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+ trips {
+ gpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+ trips {
+ gpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ infra-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+ trips {
+ infra_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ infra_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+ trips {
+ cam_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+ trips {
+ md0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+ trips {
+ md1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+ trips {
+ md2_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
--
2.41.0.rc2
next prev parent reply other threads:[~2023-05-30 19:52 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 19:51 [PATCH v4 0/5] Add LVTS support for mt8192 Bernhard Rosenkränzer
2023-05-30 19:51 ` [PATCH v4 1/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition " Bernhard Rosenkränzer
2023-05-30 19:51 ` [PATCH v4 2/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume Bernhard Rosenkränzer
2023-05-31 8:05 ` AngeloGioacchino Del Regno
2023-08-23 7:48 ` Daniel Lezcano
2023-09-25 14:52 ` Alexandre Mergnat
2023-05-30 19:51 ` [PATCH v4 3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support Bernhard Rosenkränzer
2023-05-31 8:07 ` AngeloGioacchino Del Regno
2023-07-04 6:23 ` Chen-Yu Tsai
2023-07-04 6:22 ` Chen-Yu Tsai
2023-05-30 19:51 ` Bernhard Rosenkränzer [this message]
2023-05-31 7:45 ` [PATCH v4 4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones Chen-Yu Tsai
2023-05-31 8:03 ` AngeloGioacchino Del Regno
2023-05-30 19:51 ` [PATCH v4 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation Bernhard Rosenkränzer
2023-05-31 4:49 ` [PATCH v4 0/5] Add LVTS support for mt8192 Chen-Yu Tsai
2023-06-01 17:09 ` Nícolas F. R. A. Prado
2023-06-05 7:52 ` AngeloGioacchino Del Regno
2023-06-08 9:39 ` Daniel Lezcano
2023-06-08 10:06 ` Daniel Lezcano
2023-08-16 19:57 ` Nícolas F. R. A. Prado
2023-08-16 20:49 ` Daniel Lezcano
2023-08-16 21:02 ` Nícolas F. R. A. Prado
2023-08-17 8:45 ` Chen-Yu Tsai
2023-08-17 11:39 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530195132.2286163-5-bero@baylibre.com \
--to=bero@baylibre.com \
--cc=abailon@baylibre.com \
--cc=amergnat@baylibre.com \
--cc=amitk@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=james.lo@mediatek.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=rdunlap@infradead.org \
--cc=rex-bc.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=wenst@chromium.org \
--cc=ye.xingchen@zte.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).