From: "Rafał Miłecki" <zajec5@gmail.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Daniel Golle" <daniel@makrotopia.org>,
"Hsin-Yi Wang" <hsinyi@chromium.org>,
"Nícolas F . R . A . Prado" <nfraprado@collabora.com>,
"jason-ch chen" <Jason-ch.Chen@mediatek.com>,
"Macpaul Lin" <macpaul.lin@mediatek.com>,
"Sean Wang" <sean.wang@mediatek.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, soc@kernel.org,
linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH V2 2/2] arm64: dts: mediatek: Add initial MT7981B and Xiaomi AX3000T
Date: Thu, 11 Jan 2024 11:39:28 +0100 [thread overview]
Message-ID: <20240111103928.721-3-zajec5@gmail.com> (raw)
In-Reply-To: <20240111103928.721-1-zajec5@gmail.com>
From: Rafał Miłecki <rafal@milecki.pl>
MT7981B (AKA MediaTek Filogic 820) is a dual-core ARM Cortex-A53 SoC.
One of market devices using this SoC is Xiaomi AX3000T.
This is initial contribution with basic SoC support. More hardware block
will get added later. Some will need their bindings (like auxadc).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
V2: Fix psci version
Fix gic regs
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt7981b-xiaomi-ax3000t.dts | 15 +++
arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 105 ++++++++++++++++++
3 files changed, 121 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7981b.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 0a189d5d8006..8bff11acfe1f 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
new file mode 100644
index 000000000000..a314c3e05e50
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+ compatible = "xiaomi,ax3000t", "mediatek,mt7981b";
+ model = "Xiaomi AX3000T";
+
+ memory@40000000 {
+ reg = <0 0x40000000 0 0x10000000>;
+ device_type = "memory";
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
new file mode 100644
index 000000000000..4feff3d1c5f4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt7981b";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+ };
+
+ oscillator-40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ clock-output-names = "clkxtal";
+ #clock-cells = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x0c000000 0 0x40000>, /* GICD */
+ <0 0x0c080000 0 0x200000>; /* GICR */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ infracfg: clock-controller@10001000 {
+ compatible = "mediatek,mt7981-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ clock-controller@1001b000 {
+ compatible = "mediatek,mt7981-topckgen", "syscon";
+ reg = <0 0x1001b000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ clock-controller@1001e000 {
+ compatible = "mediatek,mt7981-apmixedsys";
+ reg = <0 0x1001e000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pwm@10048000 {
+ compatible = "mediatek,mt7981-pwm";
+ reg = <0 0x10048000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_PWM_STA>,
+ <&infracfg CLK_INFRA_PWM_HCK>,
+ <&infracfg CLK_INFRA_PWM1_CK>,
+ <&infracfg CLK_INFRA_PWM2_CK>,
+ <&infracfg CLK_INFRA_PWM3_CK>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+ #pwm-cells = <2>;
+ };
+
+ clock-controller@15000000 {
+ compatible = "mediatek,mt7981-ethsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--
2.35.3
next prev parent reply other threads:[~2024-01-11 10:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-11 10:39 [PATCH V2 0/2] mt7981b: initial DT code Rafał Miłecki
2024-01-11 10:39 ` [PATCH V2 1/2] dt-bindings: arm64: mediatek: Add MT7981B and Xiaomi AX3000T Rafał Miłecki
2024-01-11 10:39 ` Rafał Miłecki [this message]
2024-01-11 10:56 ` [PATCH V2 0/2] mt7981b: initial DT code AngeloGioacchino Del Regno
2024-01-22 8:29 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240111103928.721-3-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=Jason-ch.Chen@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@chromium.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=olof@lixom.net \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).