Re: [PATCH 1/3] dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the interrupt

[Andy Shevchenko <andy.shevchenko@gmail.com>]

On Fri, Dec 24, 2021 at 3:14 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq_optional().
>
> There are no non-DT users for this driver so interrupt range
> (irq_res->start-irq_res->end) is no longer required and with DT we will
> be sure it will be a single IRQ resource for each index.

>         for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) {
> -               irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> -               if (!irq_res)
> +               irq = platform_get_irq_optional(pdev, i);
> +               if (irq == -ENXIO)
>                         break;
> -
> -               for (irq = irq_res->start; irq <= irq_res->end;
> -                    irq++, irqs++)
> -                       irqbuf[irqs] = irq;
> +               if (irq < 0)
> +                       return irq;
> +               irqbuf[irqs++] = irq;
>         }

Same comment as per other patch(es), i.e. consider 0 as no IRQ.

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek