linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v2.
@ 2019-11-23  2:32 Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support Zhou Yanjie
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Zhou Yanjie @ 2019-11-23  2:32 UTC (permalink / raw)
  To: linux-mips
  Cc: linux-kernel, devicetree, robh+dt, paul.burton, paulburton,
	jhogan, mripard, shawnguo, mark.rutland, syq, ralf, heiko,
	icenowy, laurent.pinchart, krzk, geert+renesas, paul,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

v1->v2:
Rebase on top of mips-next, use ingenic-timer driver
for system timer and clocksource.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support.
  2019-11-23  2:32 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v2 Zhou Yanjie
@ 2019-11-23  2:32 ` Zhou Yanjie
  2019-11-24 13:09   ` Paul Cercueil
  2019-11-23  2:32 ` [PATCH v2 2/4] dt-bindings: Document yna vendor-prefix Zhou Yanjie
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 7+ messages in thread
From: Zhou Yanjie @ 2019-11-23  2:32 UTC (permalink / raw)
  To: linux-mips
  Cc: linux-kernel, devicetree, robh+dt, paul.burton, paulburton,
	jhogan, mripard, shawnguo, mark.rutland, syq, ralf, heiko,
	icenowy, laurent.pinchart, krzk, geert+renesas, paul,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

Support the Ingenic X1000 SoC using the code under arch/mips/jz4740.
This is left unselectable in Kconfig until a X1000 based board is
added in a later commit.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---

Notes:
    v1->v2:
    Rebase on top of mips-next, use ingenic-timer driver
    for system timer and clocksource.

 arch/mips/boot/dts/ingenic/x1000.dtsi | 183 ++++++++++++++++++++++++++++++++++
 arch/mips/jz4740/Kconfig              |   6 ++
 2 files changed, 189 insertions(+)
 create mode 100644 arch/mips/boot/dts/ingenic/x1000.dtsi

diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
new file mode 100644
index 00000000..02a9b2a
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/x1000-cgu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1000", "ingenic,x1000e";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1000-cgu@10000000 {
+		compatible = "ingenic,x1000-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	apb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <>;
+
+		tcu: timer@10002000 {
+			compatible = "ingenic,x1000-tcu",
+					 "ingenic,jz4770-tcu",
+					 "simple-mfd";
+			reg = <0x10002000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10002000 0x1000>;
+
+			#clock-cells = <1>;
+
+			clocks = <&cgu X1000_CLK_RTCLK
+				  &cgu X1000_CLK_EXCLK
+				  &cgu X1000_CLK_PCLK>;
+			clock-names = "rtc", "ext", "pclk";
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <27 26 25>;
+		};
+
+		uart0: serial@10030000 {
+			compatible = "ingenic,x1000-uart";
+			reg = <0x10030000 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <51>;
+
+			clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+			clock-names = "baud", "module";
+
+			status = "disabled";
+		};
+
+		uart1: serial@10031000 {
+			compatible = "ingenic,x1000-uart";
+			reg = <0x10031000 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <50>;
+
+			clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+			clock-names = "baud", "module";
+
+			status = "disabled";
+		};
+
+		uart2: serial@10032000 {
+			compatible = "ingenic,x1000-uart";
+			reg = <0x10032000 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <49>;
+
+			clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+			clock-names = "baud", "module";
+
+			status = "disabled";
+		};
+
+		pinctrl: pin-controller@10010000 {
+			compatible = "ingenic,x1000-pinctrl";
+			reg = <0x10010000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpa: gpio@0 {
+				compatible = "ingenic,x1000-gpio";
+				reg = <0>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&intc>;
+				interrupts = <17>;
+			};
+
+			gpb: gpio@1 {
+				compatible = "ingenic,x1000-gpio";
+				reg = <1>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 32>;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&intc>;
+				interrupts = <16>;
+			};
+
+			gpc: gpio@2 {
+				compatible = "ingenic,x1000-gpio";
+				reg = <2>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 64 32>;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&intc>;
+				interrupts = <15>;
+			};
+
+			gpd: gpio@3 {
+				compatible = "ingenic,x1000-gpio";
+				reg = <3>;
+
+				gpio-controller;
+				gpio-ranges = <&pinctrl 0 96 32>;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&intc>;
+				interrupts = <14>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 4dd0c44..6b96844 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -33,3 +33,9 @@ config MACH_JZ4780
 	select MIPS_CPU_SCACHE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_HIGHMEM
+
+config MACH_X1000
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v2 2/4] dt-bindings: Document yna vendor-prefix.
  2019-11-23  2:32 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v2 Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support Zhou Yanjie
@ 2019-11-23  2:32 ` Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 3/4] dt-bindings: MIPS: Add Ingenic XBurst based boards Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 4/4] MIPS: Ingenic: Initial YSH & ATIL CU Neo board. support Zhou Yanjie
  3 siblings, 0 replies; 7+ messages in thread
From: Zhou Yanjie @ 2019-11-23  2:32 UTC (permalink / raw)
  To: linux-mips
  Cc: linux-kernel, devicetree, robh+dt, paul.burton, paulburton,
	jhogan, mripard, shawnguo, mark.rutland, syq, ralf, heiko,
	icenowy, laurent.pinchart, krzk, geert+renesas, paul,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

The "yna" is an acronym of the "YSH & ATIL".

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---

Notes:
    v1->v2:
    No change.

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c..47ddd88 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1054,6 +1054,8 @@ patternProperties:
     description: Xilinx
   "^xunlong,.*":
     description: Shenzhen Xunlong Software CO.,Limited
+  "^yna,.*":
+    description: YSH & ATIL
   "^yones-toptech,.*":
     description: Yones Toptech Co., Ltd.
   "^ysoft,.*":
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v2 3/4] dt-bindings: MIPS: Add Ingenic XBurst based boards.
  2019-11-23  2:32 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v2 Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 2/4] dt-bindings: Document yna vendor-prefix Zhou Yanjie
@ 2019-11-23  2:32 ` Zhou Yanjie
  2019-11-23  2:32 ` [PATCH v2 4/4] MIPS: Ingenic: Initial YSH & ATIL CU Neo board. support Zhou Yanjie
  3 siblings, 0 replies; 7+ messages in thread
From: Zhou Yanjie @ 2019-11-23  2:32 UTC (permalink / raw)
  To: linux-mips
  Cc: linux-kernel, devicetree, robh+dt, paul.burton, paulburton,
	jhogan, mripard, shawnguo, mark.rutland, syq, ralf, heiko,
	icenowy, laurent.pinchart, krzk, geert+renesas, paul,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

Add Ingenic XBurst based boards, prepare for later dts.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---

Notes:
    v1->v2:
    No change.

 .../devicetree/bindings/mips/ingenic/devices.yaml  | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/ingenic/devices.yaml

diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
new file mode 100644
index 00000000..8bb4b5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ingenic/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic XBurst based Platforms Device Tree Bindings
+
+maintainers:
+  - Zhou Yanjie <zhouyanjie@zoho.com>
+description: |
+  Devices with a Ingenic XBurst CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Qi Hardware Ben NanoNote
+        items:
+          - const: qi,lb60
+
+      - description: Game Consoles Worldwide GCW Zero
+        items:
+          - const: gcw,zero
+
+      - description: MIPS Creator CI20
+        items:
+          - const: img,ci20
+
+      - description: YSH & ATIL General Module CU Neo
+        items:
+          - const: yna,cu1000
+...
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v2 4/4] MIPS: Ingenic: Initial YSH & ATIL CU Neo board. support.
  2019-11-23  2:32 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v2 Zhou Yanjie
                   ` (2 preceding siblings ...)
  2019-11-23  2:32 ` [PATCH v2 3/4] dt-bindings: MIPS: Add Ingenic XBurst based boards Zhou Yanjie
@ 2019-11-23  2:32 ` Zhou Yanjie
  3 siblings, 0 replies; 7+ messages in thread
From: Zhou Yanjie @ 2019-11-23  2:32 UTC (permalink / raw)
  To: linux-mips
  Cc: linux-kernel, devicetree, robh+dt, paul.burton, paulburton,
	jhogan, mripard, shawnguo, mark.rutland, syq, ralf, heiko,
	icenowy, laurent.pinchart, krzk, geert+renesas, paul,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

Add a device tree for the Ingenic X1000 based YSH & ATIL CU Neo board.
Note that this is unselectable via Kconfig until the X1000 SoC is made
selectable in a later commit.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---

Notes:
    v1->v2:
    Rebase on top of mips-next, use TCU for system timer and clocksource.

 arch/mips/boot/dts/ingenic/Makefile   |   1 +
 arch/mips/boot/dts/ingenic/cu1000.dts |  52 ++++++++++++++++++
 arch/mips/configs/cu1000_defconfig    | 100 ++++++++++++++++++++++++++++++++++
 arch/mips/jz4740/Kconfig              |   4 ++
 4 files changed, 157 insertions(+)
 create mode 100644 arch/mips/boot/dts/ingenic/cu1000.dts
 create mode 100644 arch/mips/configs/cu1000_defconfig

diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 9cc4844..f6db7bb 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -2,5 +2,6 @@
 dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
 dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
+dtb-$(CONFIG_X1000_CU1000)	+= cu1000.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/cu1000.dts b/arch/mips/boot/dts/ingenic/cu1000.dts
new file mode 100644
index 00000000..b19872d
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1000.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+	compatible = "yna,cu1000", "ingenic,x1000";
+	model = "YSH & ATIL General Module CU Neo";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x04000000>;
+	};
+};
+
+&exclk {
+	clock-frequency = <24000000>;
+};
+
+&tcu {
+	/* 1500 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <1500000>, <1500000>;
+
+	/* Use channel #1 for the system timer channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+};
+
+&pinctrl {
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data-d";
+		bias-disable;
+	};
+};
diff --git a/arch/mips/configs/cu1000_defconfig b/arch/mips/configs/cu1000_defconfig
new file mode 100644
index 00000000..88729ee
--- /dev/null
+++ b/arch/mips/configs/cu1000_defconfig
@@ -0,0 +1,100 @@
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="arch/mips/boot/ramdisk.cpio.gz"
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MACH_INGENIC=y
+CONFIG_X1000_CU1000=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_HZ=100
+# CONFIG_SECCOMP is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CONSOLE_LOGLEVEL_QUIET=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS2,115200n8 mem=32M@0x0 earlycon clk_ignore_unused"
+CONFIG_CMDLINE_OVERRIDE=y
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 6b96844..b4cee0a 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -16,6 +16,10 @@ config JZ4780_CI20
 	bool "MIPS Creator CI20"
 	select MACH_JZ4780
 
+config X1000_CU1000
+	bool "YSH & ATIL General Module CU Neo"
+	select MACH_X1000
+
 endchoice
 
 config MACH_JZ4740
-- 
2.7.4



^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support.
  2019-11-23  2:32 ` [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support Zhou Yanjie
@ 2019-11-24 13:09   ` Paul Cercueil
  2019-11-24 14:41     ` Zhou Yanjie
  0 siblings, 1 reply; 7+ messages in thread
From: Paul Cercueil @ 2019-11-24 13:09 UTC (permalink / raw)
  To: Zhou Yanjie
  Cc: linux-mips, linux-kernel, devicetree, robh+dt, paul.burton,
	paulburton, jhogan, mripard, shawnguo, mark.rutland, syq, ralf,
	heiko, icenowy, laurent.pinchart, krzk, geert+renesas,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

Hi Zhou,


Le sam., nov. 23, 2019 at 10:32, Zhou Yanjie <zhouyanjie@zoho.com> a 
écrit :
> Support the Ingenic X1000 SoC using the code under arch/mips/jz4740.
> This is left unselectable in Kconfig until a X1000 based board is
> added in a later commit.
> 
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
> ---
> 
> Notes:
>     v1->v2:
>     Rebase on top of mips-next, use ingenic-timer driver
>     for system timer and clocksource.
> 
>  arch/mips/boot/dts/ingenic/x1000.dtsi | 183 
> ++++++++++++++++++++++++++++++++++
>  arch/mips/jz4740/Kconfig              |   6 ++
>  2 files changed, 189 insertions(+)
>  create mode 100644 arch/mips/boot/dts/ingenic/x1000.dtsi
> 
> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi 
> b/arch/mips/boot/dts/ingenic/x1000.dtsi
> new file mode 100644
> index 00000000..02a9b2a
> --- /dev/null
> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
> @@ -0,0 +1,183 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <dt-bindings/clock/x1000-cgu.h>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "ingenic,x1000", "ingenic,x1000e";
> +
> +	cpuintc: interrupt-controller {
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +		interrupt-controller;
> +		compatible = "mti,cpu-interrupt-controller";
> +	};
> +
> +	intc: interrupt-controller@10001000 {
> +		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
> +		reg = <0x10001000 0x50>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		interrupt-parent = <&cpuintc>;
> +		interrupts = <2>;
> +	};
> +
> +	exclk: ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +	};
> +
> +	rtclk: rtc {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +	};
> +
> +	cgu: x1000-cgu@10000000 {
> +		compatible = "ingenic,x1000-cgu";
> +		reg = <0x10000000 0x100>;
> +
> +		#clock-cells = <1>;
> +
> +		clocks = <&exclk>, <&rtclk>;
> +		clock-names = "ext", "rtc";
> +	};
> +
> +	apb {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <>;

You can drop the 'apb' node and list the children in the top node 
directly. That's what we do in the devicetree for the other Ingenic 
SoCs.

Cheers,
-Paul


> +
> +		tcu: timer@10002000 {
> +			compatible = "ingenic,x1000-tcu",
> +					 "ingenic,jz4770-tcu",
> +					 "simple-mfd";
> +			reg = <0x10002000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0x10002000 0x1000>;
> +
> +			#clock-cells = <1>;
> +
> +			clocks = <&cgu X1000_CLK_RTCLK
> +				  &cgu X1000_CLK_EXCLK
> +				  &cgu X1000_CLK_PCLK>;
> +			clock-names = "rtc", "ext", "pclk";
> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <27 26 25>;
> +		};
> +
> +		uart0: serial@10030000 {
> +			compatible = "ingenic,x1000-uart";
> +			reg = <0x10030000 0x100>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <51>;
> +
> +			clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
> +			clock-names = "baud", "module";
> +
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@10031000 {
> +			compatible = "ingenic,x1000-uart";
> +			reg = <0x10031000 0x100>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <50>;
> +
> +			clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
> +			clock-names = "baud", "module";
> +
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@10032000 {
> +			compatible = "ingenic,x1000-uart";
> +			reg = <0x10032000 0x100>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <49>;
> +
> +			clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
> +			clock-names = "baud", "module";
> +
> +			status = "disabled";
> +		};
> +
> +		pinctrl: pin-controller@10010000 {
> +			compatible = "ingenic,x1000-pinctrl";
> +			reg = <0x10010000 0x800>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			gpa: gpio@0 {
> +				compatible = "ingenic,x1000-gpio";
> +				reg = <0>;
> +
> +				gpio-controller;
> +				gpio-ranges = <&pinctrl 0 0 32>;
> +				#gpio-cells = <2>;
> +
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +
> +				interrupt-parent = <&intc>;
> +				interrupts = <17>;
> +			};
> +
> +			gpb: gpio@1 {
> +				compatible = "ingenic,x1000-gpio";
> +				reg = <1>;
> +
> +				gpio-controller;
> +				gpio-ranges = <&pinctrl 0 32 32>;
> +				#gpio-cells = <2>;
> +
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +
> +				interrupt-parent = <&intc>;
> +				interrupts = <16>;
> +			};
> +
> +			gpc: gpio@2 {
> +				compatible = "ingenic,x1000-gpio";
> +				reg = <2>;
> +
> +				gpio-controller;
> +				gpio-ranges = <&pinctrl 0 64 32>;
> +				#gpio-cells = <2>;
> +
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +
> +				interrupt-parent = <&intc>;
> +				interrupts = <15>;
> +			};
> +
> +			gpd: gpio@3 {
> +				compatible = "ingenic,x1000-gpio";
> +				reg = <3>;
> +
> +				gpio-controller;
> +				gpio-ranges = <&pinctrl 0 96 32>;
> +				#gpio-cells = <2>;
> +
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +
> +				interrupt-parent = <&intc>;
> +				interrupts = <14>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
> index 4dd0c44..6b96844 100644
> --- a/arch/mips/jz4740/Kconfig
> +++ b/arch/mips/jz4740/Kconfig
> @@ -33,3 +33,9 @@ config MACH_JZ4780
>  	select MIPS_CPU_SCACHE
>  	select SYS_HAS_CPU_MIPS32_R2
>  	select SYS_SUPPORTS_HIGHMEM
> +
> +config MACH_X1000
> +	bool
> +	select MIPS_CPU_SCACHE
> +	select SYS_HAS_CPU_MIPS32_R2
> +	select SYS_SUPPORTS_HIGHMEM
> --
> 2.7.4
> 
> 



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support.
  2019-11-24 13:09   ` Paul Cercueil
@ 2019-11-24 14:41     ` Zhou Yanjie
  0 siblings, 0 replies; 7+ messages in thread
From: Zhou Yanjie @ 2019-11-24 14:41 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: linux-mips, linux-kernel, devicetree, robh+dt, paul.burton,
	paulburton, jhogan, mripard, shawnguo, mark.rutland, syq, ralf,
	heiko, icenowy, laurent.pinchart, krzk, geert+renesas,
	prasannatsmkumar, sernia.zhou, zhenwenjin, 772753199

Hi Paul,

On 2019年11月24日 21:09, Paul Cercueil wrote:
> Hi Zhou,
>
>
> Le sam., nov. 23, 2019 at 10:32, Zhou Yanjie <zhouyanjie@zoho.com> a 
> écrit :
>> Support the Ingenic X1000 SoC using the code under arch/mips/jz4740.
>> This is left unselectable in Kconfig until a X1000 based board is
>> added in a later commit.
>>
>> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
>> ---
>>
>> Notes:
>>     v1->v2:
>>     Rebase on top of mips-next, use ingenic-timer driver
>>     for system timer and clocksource.
>>
>>  arch/mips/boot/dts/ingenic/x1000.dtsi | 183 
>> ++++++++++++++++++++++++++++++++++
>>  arch/mips/jz4740/Kconfig              |   6 ++
>>  2 files changed, 189 insertions(+)
>>  create mode 100644 arch/mips/boot/dts/ingenic/x1000.dtsi
>>
>> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi 
>> b/arch/mips/boot/dts/ingenic/x1000.dtsi
>> new file mode 100644
>> index 00000000..02a9b2a
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
>> @@ -0,0 +1,183 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +#include <dt-bindings/clock/x1000-cgu.h>
>> +
>> +/ {
>> +    #address-cells = <1>;
>> +    #size-cells = <1>;
>> +    compatible = "ingenic,x1000", "ingenic,x1000e";
>> +
>> +    cpuintc: interrupt-controller {
>> +        #address-cells = <0>;
>> +        #interrupt-cells = <1>;
>> +        interrupt-controller;
>> +        compatible = "mti,cpu-interrupt-controller";
>> +    };
>> +
>> +    intc: interrupt-controller@10001000 {
>> +        compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
>> +        reg = <0x10001000 0x50>;
>> +
>> +        interrupt-controller;
>> +        #interrupt-cells = <1>;
>> +
>> +        interrupt-parent = <&cpuintc>;
>> +        interrupts = <2>;
>> +    };
>> +
>> +    exclk: ext {
>> +        compatible = "fixed-clock";
>> +        #clock-cells = <0>;
>> +    };
>> +
>> +    rtclk: rtc {
>> +        compatible = "fixed-clock";
>> +        #clock-cells = <0>;
>> +        clock-frequency = <32768>;
>> +    };
>> +
>> +    cgu: x1000-cgu@10000000 {
>> +        compatible = "ingenic,x1000-cgu";
>> +        reg = <0x10000000 0x100>;
>> +
>> +        #clock-cells = <1>;
>> +
>> +        clocks = <&exclk>, <&rtclk>;
>> +        clock-names = "ext", "rtc";
>> +    };
>> +
>> +    apb {
>> +        compatible = "simple-bus";
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges = <>;
>
> You can drop the 'apb' node and list the children in the top node 
> directly. That's what we do in the devicetree for the other Ingenic SoCs.
>

Sure, I'll drop it in v2.

Thanks and best regards!

> Cheers,
> -Paul
>
>
>> +
>> +        tcu: timer@10002000 {
>> +            compatible = "ingenic,x1000-tcu",
>> +                     "ingenic,jz4770-tcu",
>> +                     "simple-mfd";
>> +            reg = <0x10002000 0x1000>;
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>> +            ranges = <0x0 0x10002000 0x1000>;
>> +
>> +            #clock-cells = <1>;
>> +
>> +            clocks = <&cgu X1000_CLK_RTCLK
>> +                  &cgu X1000_CLK_EXCLK
>> +                  &cgu X1000_CLK_PCLK>;
>> +            clock-names = "rtc", "ext", "pclk";
>> +
>> +            interrupt-controller;
>> +            #interrupt-cells = <1>;
>> +
>> +            interrupt-parent = <&intc>;
>> +            interrupts = <27 26 25>;
>> +        };
>> +
>> +        uart0: serial@10030000 {
>> +            compatible = "ingenic,x1000-uart";
>> +            reg = <0x10030000 0x100>;
>> +
>> +            interrupt-parent = <&intc>;
>> +            interrupts = <51>;
>> +
>> +            clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
>> +            clock-names = "baud", "module";
>> +
>> +            status = "disabled";
>> +        };
>> +
>> +        uart1: serial@10031000 {
>> +            compatible = "ingenic,x1000-uart";
>> +            reg = <0x10031000 0x100>;
>> +
>> +            interrupt-parent = <&intc>;
>> +            interrupts = <50>;
>> +
>> +            clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
>> +            clock-names = "baud", "module";
>> +
>> +            status = "disabled";
>> +        };
>> +
>> +        uart2: serial@10032000 {
>> +            compatible = "ingenic,x1000-uart";
>> +            reg = <0x10032000 0x100>;
>> +
>> +            interrupt-parent = <&intc>;
>> +            interrupts = <49>;
>> +
>> +            clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
>> +            clock-names = "baud", "module";
>> +
>> +            status = "disabled";
>> +        };
>> +
>> +        pinctrl: pin-controller@10010000 {
>> +            compatible = "ingenic,x1000-pinctrl";
>> +            reg = <0x10010000 0x800>;
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            gpa: gpio@0 {
>> +                compatible = "ingenic,x1000-gpio";
>> +                reg = <0>;
>> +
>> +                gpio-controller;
>> +                gpio-ranges = <&pinctrl 0 0 32>;
>> +                #gpio-cells = <2>;
>> +
>> +                interrupt-controller;
>> +                #interrupt-cells = <2>;
>> +
>> +                interrupt-parent = <&intc>;
>> +                interrupts = <17>;
>> +            };
>> +
>> +            gpb: gpio@1 {
>> +                compatible = "ingenic,x1000-gpio";
>> +                reg = <1>;
>> +
>> +                gpio-controller;
>> +                gpio-ranges = <&pinctrl 0 32 32>;
>> +                #gpio-cells = <2>;
>> +
>> +                interrupt-controller;
>> +                #interrupt-cells = <2>;
>> +
>> +                interrupt-parent = <&intc>;
>> +                interrupts = <16>;
>> +            };
>> +
>> +            gpc: gpio@2 {
>> +                compatible = "ingenic,x1000-gpio";
>> +                reg = <2>;
>> +
>> +                gpio-controller;
>> +                gpio-ranges = <&pinctrl 0 64 32>;
>> +                #gpio-cells = <2>;
>> +
>> +                interrupt-controller;
>> +                #interrupt-cells = <2>;
>> +
>> +                interrupt-parent = <&intc>;
>> +                interrupts = <15>;
>> +            };
>> +
>> +            gpd: gpio@3 {
>> +                compatible = "ingenic,x1000-gpio";
>> +                reg = <3>;
>> +
>> +                gpio-controller;
>> +                gpio-ranges = <&pinctrl 0 96 32>;
>> +                #gpio-cells = <2>;
>> +
>> +                interrupt-controller;
>> +                #interrupt-cells = <2>;
>> +
>> +                interrupt-parent = <&intc>;
>> +                interrupts = <14>;
>> +            };
>> +        };
>> +    };
>> +};
>> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
>> index 4dd0c44..6b96844 100644
>> --- a/arch/mips/jz4740/Kconfig
>> +++ b/arch/mips/jz4740/Kconfig
>> @@ -33,3 +33,9 @@ config MACH_JZ4780
>>      select MIPS_CPU_SCACHE
>>      select SYS_HAS_CPU_MIPS32_R2
>>      select SYS_SUPPORTS_HIGHMEM
>> +
>> +config MACH_X1000
>> +    bool
>> +    select MIPS_CPU_SCACHE
>> +    select SYS_HAS_CPU_MIPS32_R2
>> +    select SYS_SUPPORTS_HIGHMEM
>> -- 
>> 2.7.4
>>
>>
>
>




^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-11-24 14:42 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-23  2:32 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v2 Zhou Yanjie
2019-11-23  2:32 ` [PATCH v2 1/4] MIPS: Ingenic: initial X1000 support Zhou Yanjie
2019-11-24 13:09   ` Paul Cercueil
2019-11-24 14:41     ` Zhou Yanjie
2019-11-23  2:32 ` [PATCH v2 2/4] dt-bindings: Document yna vendor-prefix Zhou Yanjie
2019-11-23  2:32 ` [PATCH v2 3/4] dt-bindings: MIPS: Add Ingenic XBurst based boards Zhou Yanjie
2019-11-23  2:32 ` [PATCH v2 4/4] MIPS: Ingenic: Initial YSH & ATIL CU Neo board. support Zhou Yanjie

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).