Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Zhou Yanjie <zhouyanjie@zoho.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	paul.burton@mips.com, paulburton@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org, mark.rutland@arm.com,
	syq@debian.org, paul@crapouillou.net, sernia.zhou@foxmail.com,
	zhenwenjin@gmail.com
Subject: [PATCH 3/5] clk: Ingenic: Add CGU driver for X1830.
Date: Wed, 27 Nov 2019 11:32:54 +0800
Message-ID: <1574825576-91028-4-git-send-email-zhouyanjie@zoho.com> (raw)
In-Reply-To: <1574825576-91028-1-git-send-email-zhouyanjie@zoho.com>

Add support for the clocks provided by the CGU in the Ingenic X1830
SoC, making use of the cgu code to do the heavy lifting.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/clk/ingenic/Kconfig     |  10 ++
 drivers/clk/ingenic/Makefile    |   1 +
 drivers/clk/ingenic/x1830-cgu.c | 336 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 347 insertions(+)
 create mode 100644 drivers/clk/ingenic/x1830-cgu.c

diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
index fb7b399..59c6c2c 100644
--- a/drivers/clk/ingenic/Kconfig
+++ b/drivers/clk/ingenic/Kconfig
@@ -55,6 +55,16 @@ config INGENIC_CGU_X1000
 
 	  If building for a X1000 SoC, you want to say Y here.
 
+config INGENIC_CGU_X1830
+	bool "Ingenic X1830 CGU driver"
+	default MACH_X1830
+	select INGENIC_CGU_COMMON
+	help
+	  Support the clocks provided by the CGU hardware on Ingenic X1830
+	  and compatible SoCs.
+
+	  If building for a X1830 SoC, you want to say Y here.
+
 config INGENIC_TCU_CLK
 	bool "Ingenic JZ47xx TCU clocks driver"
 	default MACH_INGENIC
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index 8b1dad9..aaa4bff 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4780)	+= jz4780-cgu.o
 obj-$(CONFIG_INGENIC_CGU_X1000)		+= x1000-cgu.o
+obj-$(CONFIG_INGENIC_CGU_X1830)		+= x1830-cgu.o
 obj-$(CONFIG_INGENIC_TCU_CLK)		+= tcu.o
diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
new file mode 100644
index 00000000..946af6f
--- /dev/null
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * X1830 SoC CGU driver
+ * Copyright (c) 2019 Zhou Yanjie <zhouyanjie@zoho.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/clock/x1830-cgu.h>
+#include "cgu.h"
+#include "pm.h"
+
+/* CGU register offsets */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_CPPCR		0x0c
+#define CGU_REG_APLL		0x10
+#define CGU_REG_MPLL		0x14
+#define CGU_REG_EPLL		0x58
+#define CGU_REG_VPLL		0xe0
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_DDRCDR		0x2c
+#define CGU_REG_USBPCR		0x3c
+#define CGU_REG_USBRDT		0x40
+#define CGU_REG_USBVBFIL	0x44
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_MACCDR		0x54
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_I2SCDR1		0x70
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_MSC1CDR		0xa4
+#define CGU_REG_CMP_INTR	0xb0
+#define CGU_REG_CMP_INTRE	0xb4
+#define CGU_REG_DRCG		0xd0
+#define CGU_REG_CPCSR		0xd4
+#define CGU_REG_MACPHYC		0xe8
+
+/* bits within the OPCR register */
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
+
+static struct ingenic_cgu *cgu;
+
+static const s8 pll_od_encoding[64] = {
+	0x0, 0x1,  -1, 0x2,  -1,  -1,  -1, 0x3,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x4,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x5,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1,  -1,
+	 -1,  -1,  -1,  -1,  -1,  -1,  -1, 0x6,
+};
+
+static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
+	[X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[X1830_CLK_APLL] = {
+		"apll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.version = CGU_X1830,
+			.reg = { CGU_REG_CPPCR, CGU_REG_APLL },
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 30,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_MPLL] = {
+		"mpll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.version = CGU_X1830,
+			.reg = { CGU_REG_CPPCR, CGU_REG_MPLL },
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 28,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_EPLL] = {
+		"epll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.version = CGU_X1830,
+			.reg = { CGU_REG_CPPCR, CGU_REG_EPLL },
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 24,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	[X1830_CLK_VPLL] = {
+		"vpll", CGU_CLK_PLL,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.version = CGU_X1830,
+			.reg = { CGU_REG_CPPCR, CGU_REG_VPLL },
+			.m_shift = 20,
+			.m_bits = 9,
+			.m_offset = 1,
+			.n_shift = 14,
+			.n_bits = 6,
+			.n_offset = 1,
+			.od_shift = 11,
+			.od_bits = 3,
+			.od_max = 64,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 26,
+			.enable_bit = 0,
+			.stable_bit = 3,
+		},
+	},
+
+	/* Muxes & dividers */
+
+	[X1830_CLK_SCLKA] = {
+		"sclk_a", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
+		.mux = { CGU_REG_CPCCR, 30, 2 },
+	},
+
+	[X1830_CLK_CPUMUX] = {
+		"cpu_mux", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 28, 2 },
+	},
+
+	[X1830_CLK_CPU] = {
+		"cpu", CGU_CLK_DIV,
+		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+	},
+
+	[X1830_CLK_L2CACHE] = {
+		"l2cache", CGU_CLK_DIV,
+		.parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+
+	[X1830_CLK_AHB0] = {
+		"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 26, 2 },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
+	},
+
+	[X1830_CLK_AHB2PMUX] = {
+		"ahb2_apb_mux", CGU_CLK_MUX,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 24, 2 },
+	},
+
+	[X1830_CLK_AHB2] = {
+		"ahb2", CGU_CLK_DIV,
+		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
+	},
+
+	[X1830_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV,
+		.parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
+	},
+
+	[X1830_CLK_DDR] = {
+		"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+		.mux = { CGU_REG_DDRCDR, 30, 2 },
+		.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 31 },
+	},
+
+	[X1830_CLK_MAC] = {
+		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_MACCDR, 30, 2 },
+		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR1, 4 },
+	},
+
+	[X1830_CLK_MSCMUX] = {
+		"msc_mux", CGU_CLK_MUX,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_MSC0CDR, 30, 2 },
+	},
+
+	[X1830_CLK_MSC0] = {
+		"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+
+	[X1830_CLK_MSC1] = {
+		"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+
+	[X1830_CLK_SSIPLL] = {
+		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+					 X1830_CLK_VPLL, X1830_CLK_EPLL },
+		.mux = { CGU_REG_SSICDR, 30, 2 },
+		.div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
+	},
+
+	[X1830_CLK_SSIMUX] = {
+		"ssi_mux", CGU_CLK_MUX,
+		.parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL, -1, -1 },
+		.mux = { CGU_REG_SSICDR, 29, 1 },
+	},
+
+	/* Gate-only clocks */
+
+	[X1830_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+
+	[X1830_CLK_SMB0] = {
+		"smb0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 7 },
+	},
+
+	[X1830_CLK_SMB1] = {
+		"smb1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+
+	[X1830_CLK_SMB2] = {
+		"smb2", CGU_CLK_GATE,
+		.parents = { X1830_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 9 },
+	},
+
+	[X1830_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+
+	[X1830_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+
+	[X1830_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+
+	[X1830_CLK_SFC] = {
+		"sfc", CGU_CLK_GATE,
+		.parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+
+	[X1830_CLK_PDMA] = {
+		"pdma", CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+};
+
+static void __init x1830_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(x1830_cgu_clocks,
+			      ARRAY_SIZE(x1830_cgu_clocks), np);
+	if (!cgu) {
+		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval) {
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+		return;
+	}
+
+	ingenic_cgu_register_syscore_ops(cgu);
+}
+CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu", x1830_cgu_init);
-- 
2.7.4



  parent reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27  3:32 clk: Ingenic: Add support for the X1830 and add USB clk for X1000 Zhou Yanjie
2019-11-27  3:32 ` [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830 Zhou Yanjie
2019-11-27 17:37   ` Paul Cercueil
2019-11-28  6:29     ` Zhou Yanjie
2019-11-29 11:23       ` Paul Cercueil
2019-12-10 22:55         ` Paul Burton
2019-11-27  3:32 ` [PATCH 2/5] dt-bindings: clock: Add X1830 bindings Zhou Yanjie
2019-12-05 20:38   ` Rob Herring
2019-11-27  3:32 ` Zhou Yanjie [this message]
2019-11-27  3:32 ` [PATCH 4/5] dt-bindings: clock: Add USB OTG clock for X1000 Zhou Yanjie
2019-11-27 17:19   ` Paul Cercueil
2019-11-28  5:44     ` Zhou Yanjie
2019-11-27  3:32 ` [PATCH 5/5] clk: Ingenic: " Zhou Yanjie

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574825576-91028-4-git-send-email-zhouyanjie@zoho.com \
    --to=zhouyanjie@zoho.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=paul.burton@mips.com \
    --cc=paul@crapouillou.net \
    --cc=paulburton@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sernia.zhou@foxmail.com \
    --cc=syq@debian.org \
    --cc=zhenwenjin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git