linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: zhouyanjie <zhouyanjie@wanyeetech.com>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	paul.burton@mips.com, paulburton@kernel.org, jhogan@kernel.org,
	mripard@kernel.org, shawnguo@kernel.org, mark.rutland@arm.com,
	alexandre.belloni@bootlin.com, ralf@linux-mips.org,
	heiko@sntech.de, icenowy@aosc.io, ak@linux.intel.com,
	laurent.pinchart@ideasonboard.com, krzk@kernel.org,
	geert+renesas@glider.be, prasannatsmkumar@gmail.com,
	keescook@chromium.org, ebiederm@xmission.com,
	sernia.zhou@foxmail.com, zhenwenjin@gmail.com, 772753199@qq.com
Subject: Re: [PATCH v8 4/4] MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
Date: Wed, 11 Dec 2019 13:56:04 +0100	[thread overview]
Message-ID: <1576068964.3.0@crapouillou.net> (raw)
In-Reply-To: <5DF0CCCA.60404@wanyeetech.com>

Hi Zhou,


Le mer., déc. 11, 2019 at 19:02, zhouyanjie 
<zhouyanjie@wanyeetech.com> a écrit :
> 
> 
> On 2019年12月11日 01:19, Paul Cercueil wrote:
>> Hi Zhou,
>> 
>> 
>> Le mar., déc. 10, 2019 at 20:02, 周琰杰 (Zhou Yanjie) 
>> \x7f<zhouyanjie@wanyeetech.com> a écrit :
>>> Add a device tree for the Ingenic X1000 based YSH & ATIL CU Neo 
>>> board.
>>> Note that this is unselectable via Kconfig until the X1000 SoC is 
>>> made
>>> selectable in a later commit.
>> 
>> I believe it is now selectable via Kconfig, right?
>> 
> 
> Oh, apologize for my careless, it should be selectable now.
> Do I need to send a v9 to fix the commit message?

Maybe Paul Burton can just remove the last sentence when merging.

-Paul


>> For the whole series:
>> Acked-by: Paul Cercueil <paul@crapouillou.net>
>> 
>> Cheers,
>> Paul
>> 
>> 
>>> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>>> ---
>>> 
>>> Notes:
>>>     v1->v2:
>>>     Rebase on top of mips-next, use TCU for system timer and 
>>> \x7f\x7fclocksource.
>>> 
>>>     v2->v3:
>>>     No change.
>>> 
>>>     v3->v4:
>>>     1.Adjust "model" in "cu1000.dts" to match the description in 
>>> \x7f\x7f"devices.yaml".
>>>     2.Adjust "bool" in "Kconfig" to avoid duplicate names with 
>>> \x7f\x7fsubsequent boards.
>>> 
>>>     v4->v5:
>>>     1.Rename "cu1000" to "cu1000-neo" to prevent conflicts with 
>>> \x7f\x7fsubsequent boards
>>>       such as "cu1000-geo", and so on.
>>>     2.Remove "CONFIG_HZ=100" and "mem=32M@0x0" from defconfg.
>>>     3.Modify incorrect comments in DT.
>>> 
>>>     v5->v6:
>>>     1.Use "stdout-path = "serial2:115200n8"" instead "stdout-path = 
>>> \x7f\x7f&uart2" in DT.
>>>     2.Remove "console=ttyS2,115200n8" and 
>>> "CONFIG_CMDLINE_OVERRIDE=y" \x7f\x7ffrom defconfg.
>>> 
>>>     v6->v7:
>>>     Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
>>>     to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
>>>     the old mailbox is in an unstable state.
>>> 
>>>     v7->v8:
>>>     Merge [6/6] in v7 to this patch.
>>> 
>>>  arch/mips/boot/dts/ingenic/Makefile       |   1 +
>>>  arch/mips/boot/dts/ingenic/cu1000-neo.dts |  99 
>>> \x7f\x7f++++++++++++++++++++++++++
>>>  arch/mips/configs/cu1000-neo_defconfig    | 111 
>>> \x7f\x7f++++++++++++++++++++++++++++++
>>>  arch/mips/jz4740/Kconfig                  |   4 ++
>>>  4 files changed, 215 insertions(+)
>>>  create mode 100644 arch/mips/boot/dts/ingenic/cu1000-neo.dts
>>>  create mode 100644 arch/mips/configs/cu1000-neo_defconfig
>>> 
>>> diff --git a/arch/mips/boot/dts/ingenic/Makefile 
>>> \x7f\x7fb/arch/mips/boot/dts/ingenic/Makefile
>>> index 9cc4844..e165429 100644
>>> --- a/arch/mips/boot/dts/ingenic/Makefile
>>> +++ b/arch/mips/boot/dts/ingenic/Makefile
>>> @@ -2,5 +2,6 @@
>>>  dtb-$(CONFIG_JZ4740_QI_LB60)    += qi_lb60.dtb
>>>  dtb-$(CONFIG_JZ4770_GCW0)    += gcw0.dtb
>>>  dtb-$(CONFIG_JZ4780_CI20)    += ci20.dtb
>>> +dtb-$(CONFIG_X1000_CU1000_NEO)    += cu1000-neo.dtb
>>> 
>>>  obj-$(CONFIG_BUILTIN_DTB)    += $(addsuffix .o, $(dtb-y))
>>> diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts 
>>> \x7f\x7fb/arch/mips/boot/dts/ingenic/cu1000-neo.dts
>>> new file mode 100644
>>> index 00000000..b0733da
>>> --- /dev/null
>>> +++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
>>> @@ -0,0 +1,99 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/dts-v1/;
>>> +
>>> +#include "x1000.dtsi"
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/clock/ingenic,tcu.h>
>>> +
>>> +/ {
>>> +    compatible = "yna,cu1000-neo", "ingenic,x1000";
>>> +    model = "YSH & ATIL General Board CU Neo";
>>> +
>>> +    aliases {
>>> +        serial2 = &uart2;
>>> +    };
>>> +
>>> +    chosen {
>>> +        stdout-path = "serial2:115200n8";
>>> +    };
>>> +
>>> +    memory {
>>> +        device_type = "memory";
>>> +        reg = <0x0 0x04000000>;
>>> +    };
>>> +};
>>> +
>>> +&exclk {
>>> +    clock-frequency = <24000000>;
>>> +};
>>> +
>>> +&tcu {
>>> +    /* 1500 kHz for the system timer and clocksource */
>>> +    assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
>>> +    assigned-clock-rates = <1500000>, <1500000>;
>>> +
>>> +    /* Use channel #0 for the system timer channel #2 for the 
>>> \x7f\x7fclocksource */
>>> +    ingenic,pwm-channels-mask = <0xfa>;
>>> +};
>>> +
>>> +&uart2 {
>>> +    pinctrl-names = "default";
>>> +    pinctrl-0 = <&pins_uart2>;
>>> +
>>> +    status = "okay";
>>> +};
>>> +
>>> +&mac {
>>> +    phy-mode = "rmii";
>>> +    phy-handle = <&lan8720a>;
>>> +
>>> +    pinctrl-names = "default";
>>> +    pinctrl-0 = <&pins_mac>;
>>> +
>>> +    snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
>>> +    snps,reset-active-low;
>>> +    snps,reset-delays-us = <0 10000 30000>;
>>> +
>>> +    status = "okay";
>>> +};
>>> +
>>> +&mdio {
>>> +    status = "okay";
>>> +
>>> +    lan8720a: ethernet-phy@0 {
>>> +        compatible = "ethernet-phy-id0007.c0f0", 
>>> \x7f\x7f"ethernet-phy-ieee802.3-c22";
>>> +        reg = <0>;
>>> +    };
>>> +};
>>> +
>>> +&msc0 {
>>> +    bus-width = <8>;
>>> +    max-frequency = <50000000>;
>>> +
>>> +    pinctrl-names = "default";
>>> +    pinctrl-0 = <&pins_msc0>;
>>> +
>>> +    non-removable;
>>> +
>>> +    status = "okay";
>>> +};
>>> +
>>> +&pinctrl {
>>> +    pins_uart2: uart2 {
>>> +        function = "uart2";
>>> +        groups = "uart2-data-d";
>>> +        bias-disable;
>>> +    };
>>> +
>>> +    pins_mac: mac {
>>> +        function = "mac";
>>> +        groups = "mac";
>>> +        bias-disable;
>>> +    };
>>> +
>>> +    pins_msc0: msc0 {
>>> +        function = "mmc0";
>>> +        groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
>>> +        bias-disable;
>>> +    };
>>> +};
>>> diff --git a/arch/mips/configs/cu1000-neo_defconfig 
>>> \x7f\x7fb/arch/mips/configs/cu1000-neo_defconfig
>>> new file mode 100644
>>> index 00000000..9f988ed
>>> --- /dev/null
>>> +++ b/arch/mips/configs/cu1000-neo_defconfig
>>> @@ -0,0 +1,111 @@
>>> +CONFIG_LOCALVERSION_AUTO=y
>>> +CONFIG_KERNEL_GZIP=y
>>> +CONFIG_SYSVIPC=y
>>> +CONFIG_NO_HZ_IDLE=y
>>> +CONFIG_HIGH_RES_TIMERS=y
>>> +CONFIG_PREEMPT=y
>>> +CONFIG_IKCONFIG=y
>>> +CONFIG_IKCONFIG_PROC=y
>>> +CONFIG_LOG_BUF_SHIFT=14
>>> +CONFIG_CGROUPS=y
>>> +CONFIG_MEMCG=y
>>> +CONFIG_MEMCG_KMEM=y
>>> +CONFIG_CGROUP_SCHED=y
>>> +CONFIG_CGROUP_FREEZER=y
>>> +CONFIG_CGROUP_DEVICE=y
>>> +CONFIG_CGROUP_CPUACCT=y
>>> +CONFIG_NAMESPACES=y
>>> +CONFIG_USER_NS=y
>>> +CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>>> +CONFIG_SYSCTL_SYSCALL=y
>>> +CONFIG_KALLSYMS_ALL=y
>>> +CONFIG_EMBEDDED=y
>>> +# CONFIG_VM_EVENT_COUNTERS is not set
>>> +# CONFIG_COMPAT_BRK is not set
>>> +CONFIG_SLAB=y
>>> +CONFIG_MACH_INGENIC=y
>>> +CONFIG_X1000_CU1000_NEO=y
>>> +CONFIG_HIGHMEM=y
>>> +CONFIG_HZ_100=y
>>> +# CONFIG_SECCOMP is not set
>>> +# CONFIG_SUSPEND is not set
>>> +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
>>> +# CONFIG_COMPACTION is not set
>>> +CONFIG_CMA=y
>>> +CONFIG_CMA_AREAS=7
>>> +CONFIG_NET=y
>>> +CONFIG_UNIX=y
>>> +CONFIG_INET=y
>>> +CONFIG_UEVENT_HELPER=y
>>> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>>> +CONFIG_DEVTMPFS=y
>>> +# CONFIG_FW_LOADER is not set
>>> +# CONFIG_ALLOW_DEV_COREDUMP is not set
>>> +CONFIG_NETDEVICES=y
>>> +CONFIG_STMMAC_ETH=y
>>> +CONFIG_SMSC_PHY=y
>>> +# CONFIG_INPUT_MOUSEDEV is not set
>>> +# CONFIG_INPUT_KEYBOARD is not set
>>> +# CONFIG_INPUT_MOUSE is not set
>>> +# CONFIG_SERIO is not set
>>> +CONFIG_VT_HW_CONSOLE_BINDING=y
>>> +CONFIG_LEGACY_PTY_COUNT=2
>>> +CONFIG_SERIAL_EARLYCON=y
>>> +CONFIG_SERIAL_8250=y
>>> +CONFIG_SERIAL_8250_CONSOLE=y
>>> +CONFIG_SERIAL_8250_NR_UARTS=3
>>> +CONFIG_SERIAL_8250_RUNTIME_UARTS=3
>>> +CONFIG_SERIAL_8250_INGENIC=y
>>> +CONFIG_SERIAL_OF_PLATFORM=y
>>> +# CONFIG_HW_RANDOM is not set
>>> +CONFIG_GPIO_SYSFS=y
>>> +CONFIG_WATCHDOG=y
>>> +CONFIG_JZ4740_WDT=y
>>> +# CONFIG_HWMON is not set
>>> +# CONFIG_LCD_CLASS_DEVICE is not set
>>> +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
>>> +# CONFIG_VGA_CONSOLE is not set
>>> +# CONFIG_HID is not set
>>> +# CONFIG_USB_SUPPORT is not set
>>> +CONFIG_MMC=y
>>> +CONFIG_MMC_JZ4740=y
>>> +CONFIG_RTC_CLASS=y
>>> +CONFIG_RTC_DRV_JZ4740=y
>>> +CONFIG_DMADEVICES=y
>>> +CONFIG_DMA_JZ4780=y
>>> +# CONFIG_IOMMU_SUPPORT is not set
>>> +CONFIG_NVMEM=y
>>> +CONFIG_NVMEM_SYSFS=y
>>> +CONFIG_EXT4_FS=y
>>> +# CONFIG_DNOTIFY is not set
>>> +CONFIG_AUTOFS_FS=y
>>> +CONFIG_PROC_KCORE=y
>>> +# CONFIG_PROC_PAGE_MONITOR is not set
>>> +CONFIG_TMPFS=y
>>> +CONFIG_CONFIGFS_FS=y
>>> +CONFIG_NLS=y
>>> +CONFIG_NLS_CODEPAGE_936=y
>>> +CONFIG_NLS_CODEPAGE_950=y
>>> +CONFIG_NLS_ASCII=y
>>> +CONFIG_NLS_ISO8859_1=y
>>> +CONFIG_NLS_UTF8=y
>>> +CONFIG_CRYPTO_ECHAINIV=y
>>> +CONFIG_CRYPTO_AES=y
>>> +CONFIG_CRYPTO_DEFLATE=y
>>> +CONFIG_CRYPTO_LZO=y
>>> +CONFIG_PRINTK_TIME=y
>>> +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
>>> +CONFIG_CONSOLE_LOGLEVEL_QUIET=15
>>> +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
>>> +CONFIG_DEBUG_INFO=y
>>> +CONFIG_STRIP_ASM_SYMS=y
>>> +CONFIG_DEBUG_FS=y
>>> +CONFIG_MAGIC_SYSRQ=y
>>> +CONFIG_PANIC_ON_OOPS=y
>>> +CONFIG_PANIC_TIMEOUT=10
>>> +# CONFIG_SCHED_DEBUG is not set
>>> +# CONFIG_DEBUG_PREEMPT is not set
>>> +CONFIG_STACKTRACE=y
>>> +# CONFIG_FTRACE is not set
>>> +CONFIG_CMDLINE_BOOL=y
>>> +CONFIG_CMDLINE="earlycon clk_ignore_unused"
>>> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
>>> index 6b96844..412d2fa 100644
>>> --- a/arch/mips/jz4740/Kconfig
>>> +++ b/arch/mips/jz4740/Kconfig
>>> @@ -16,6 +16,10 @@ config JZ4780_CI20
>>>      bool "MIPS Creator CI20"
>>>      select MACH_JZ4780
>>> 
>>> +config X1000_CU1000_NEO
>>> +    bool "YSH & ATIL CU1000 Module with Neo backplane"
>>> +    select MACH_X1000
>>> +
>>>  endchoice
>>> 
>>>  config MACH_JZ4740
>>> --
>>> 2.7.4
>>> 
>> 
> 



      reply	other threads:[~2019-12-11 12:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 12:02 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v7 周琰杰 (Zhou Yanjie)
2019-12-10 12:02 ` [PATCH v8 1/4] MIPS: Ingenic: Add Ingenic X1000 support 周琰杰 (Zhou Yanjie)
2020-01-09 18:52   ` Paul Burton
2019-12-10 12:02 ` [PATCH v8 2/4] dt-bindings: Document yna vendor-prefix 周琰杰 (Zhou Yanjie)
2019-12-18 14:54   ` Rob Herring
2019-12-10 12:02 ` [PATCH v8 3/4] dt-bindings: MIPS: Add Ingenic XBurst based boards 周琰杰 (Zhou Yanjie)
2019-12-18 14:55   ` Rob Herring
2019-12-10 12:02 ` [PATCH v8 4/4] MIPS: Ingenic: Add YSH & ATIL CU Neo board support 周琰杰 (Zhou Yanjie)
2019-12-10 17:19   ` Paul Cercueil
2019-12-11 11:02     ` zhouyanjie
2019-12-11 12:56       ` Paul Cercueil [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1576068964.3.0@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=772753199@qq.com \
    --cc=ak@linux.intel.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ebiederm@xmission.com \
    --cc=geert+renesas@glider.be \
    --cc=heiko@sntech.de \
    --cc=icenowy@aosc.io \
    --cc=jhogan@kernel.org \
    --cc=keescook@chromium.org \
    --cc=krzk@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=paul.burton@mips.com \
    --cc=paulburton@kernel.org \
    --cc=prasannatsmkumar@gmail.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=sernia.zhou@foxmail.com \
    --cc=shawnguo@kernel.org \
    --cc=zhenwenjin@gmail.com \
    --cc=zhouyanjie@wanyeetech.com \
    --subject='Re: [PATCH v8 4/4] MIPS: Ingenic: Add YSH & ATIL CU Neo board support.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).